static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq,
bool is_qspi)
{
DeviceState *dev;
SysBusDevice *busdev;
SSIBus *spi;
DeviceState *flash_dev;
int i, j;
int num_busses = is_qspi ? NUM_QSPI_BUSSES : 1;
int num_ss = is_qspi ? NUM_QSPI_FLASHES : NUM_SPI_FLASHES;
dev = qdev_create(NULL, is_qspi ? "xlnx.ps7-qspi" : "xlnx.ps7-spi");
qdev_prop_set_uint8(dev, "num-txrx-bytes", is_qspi ? 4 : 1);
qdev_prop_set_uint8(dev, "num-ss-bits", num_ss);
qdev_prop_set_uint8(dev, "num-busses", num_busses);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, base_addr);
if (is_qspi) {
sysbus_mmio_map(busdev, 1, 0xFC000000);
}
sysbus_connect_irq(busdev, 0, irq);
for (i = 0; i < num_busses; ++i) {
char bus_name[16];
qemu_irq cs_line;
snprintf(bus_name, 16, "spi%d", i);
spi = (SSIBus *)qdev_get_child_bus(dev, bus_name);
for (j = 0; j < num_ss; ++j) {
flash_dev = ssi_create_slave(spi, "n25q128");
cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(busdev, i * num_ss + j + 1, cs_line);
}
}
}
static void
petalogix_ml605_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
MemoryRegion *address_space_mem = get_system_memory();
DeviceState *dev, *dma, *eth0;
Object *ds, *cs;
MicroBlazeCPU *cpu;
SysBusDevice *busdev;
DriveInfo *dinfo;
int i;
MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32];
/* init CPUs */
cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
object_property_set_str(OBJECT(cpu), "8.10.a", "version", &error_abort);
/* Use FPU but don't use floating point conversion and square
* root instructions
*/
object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
object_property_set_bool(OBJECT(cpu), true, "dcache-writeback",
&error_abort);
object_property_set_bool(OBJECT(cpu), true, "endianness", &error_abort);
object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
/* Attach emulated BRAM through the LMB. */
memory_region_init_ram(phys_lmb_bram, NULL, "petalogix_ml605.lmb_bram",
LMB_BRAM_SIZE, &error_fatal);
vmstate_register_ram_global(phys_lmb_bram);
memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);
memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size,
&error_fatal);
vmstate_register_ram_global(phys_ram);
memory_region_add_subregion(address_space_mem, MEMORY_BASEADDR, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* 5th parameter 2 means bank-width
* 10th paremeter 0 means little-endian */
pflash_cfi01_register(FLASH_BASEADDR,
NULL, "petalogix_ml605.flash", FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
(64 * 1024), FLASH_SIZE >> 16,
2, 0x89, 0x18, 0x0000, 0x0, 0);
dev = qdev_create(NULL, "xlnx.xps-intc");
qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(dev, i);
}
serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
irq[UART16550_IRQ], 115200, serial_hds[0],
DEVICE_LITTLE_ENDIAN);
/* 2 timers at irq 2 @ 100 Mhz. */
dev = qdev_create(NULL, "xlnx.xps-timer");
qdev_prop_set_uint32(dev, "one-timer-only", 0);
qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
/* axi ethernet and dma initialization. */
qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
eth0 = qdev_create(NULL, "xlnx.axi-ethernet");
dma = qdev_create(NULL, "xlnx.axi-dma");
/* FIXME: attach to the sysbus instead */
object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0),
NULL);
object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma),
NULL);
ds = object_property_get_link(OBJECT(dma),
"axistream-connected-target", NULL);
cs = object_property_get_link(OBJECT(dma),
"axistream-control-connected-target", NULL);
qdev_set_nic_properties(eth0, &nd_table[0]);
qdev_prop_set_uint32(eth0, "rxmem", 0x1000);
qdev_prop_set_uint32(eth0, "txmem", 0x1000);
object_property_set_link(OBJECT(eth0), OBJECT(ds),
"axistream-connected", &error_abort);
object_property_set_link(OBJECT(eth0), OBJECT(cs),
"axistream-control-connected", &error_abort);
qdev_init_nofail(eth0);
sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]);
ds = object_property_get_link(OBJECT(eth0),
"axistream-connected-target", NULL);
cs = object_property_get_link(OBJECT(eth0),
"axistream-control-connected-target", NULL);
qdev_prop_set_uint32(dma, "freqhz", 100 * 1000000);
object_property_set_link(OBJECT(dma), OBJECT(ds),
"axistream-connected", &error_abort);
object_property_set_link(OBJECT(dma), OBJECT(cs),
"axistream-control-connected", &error_abort);
qdev_init_nofail(dma);
sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]);
sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]);
{
SSIBus *spi;
dev = qdev_create(NULL, "xlnx.xps-spi");
qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, SPI_BASEADDR);
sysbus_connect_irq(busdev, 0, irq[SPI_IRQ]);
spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
for (i = 0; i < NUM_SPI_FLASHES; i++) {
qemu_irq cs_line;
dev = ssi_create_slave(spi, "n25q128");
cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(busdev, i+1, cs_line);
}
}
/* setup PVR to match kernel settings */
cpu->env.pvr.regs[4] = 0xc56b8000;
cpu->env.pvr.regs[5] = 0xc56be000;
cpu->env.pvr.regs[10] = 0x0e000000; /* virtex 6 */
microblaze_load_kernel(cpu, MEMORY_BASEADDR, ram_size,
machine->initrd_filename,
BINARY_DEVICE_TREE_FILE,
NULL);
}
static void z2_init(QEMUMachineInitArgs *args)
{
const char *cpu_model = args->cpu_model;
const char *kernel_filename = args->kernel_filename;
const char *kernel_cmdline = args->kernel_cmdline;
const char *initrd_filename = args->initrd_filename;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t sector_len = 0x10000;
PXA2xxState *mpu;
DriveInfo *dinfo;
int be;
void *z2_lcd;
i2c_bus *bus;
DeviceState *wm;
if (!cpu_model) {
cpu_model = "pxa270-c5";
}
/* Setup CPU & memory */
mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, cpu_model);
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo) {
fprintf(stderr, "Flash image must be given with the "
"'pflash' parameter\n");
exit(1);
}
if (!pflash_cfi01_register(Z2_FLASH_BASE,
NULL, "z2.flash0", Z2_FLASH_SIZE,
dinfo->bdrv, sector_len,
Z2_FLASH_SIZE / sector_len, 4, 0, 0, 0, 0,
be)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
/* setup keypad */
pxa27x_register_keypad(mpu->kp, map, 0x100);
/* MMC/SD host */
pxa2xx_mmci_handlers(mpu->mmc,
NULL,
qdev_get_gpio_in(mpu->gpio, Z2_GPIO_SD_DETECT));
type_register_static(&zipit_lcd_info);
type_register_static(&aer915_info);
z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd");
bus = pxa2xx_i2c_bus(mpu->i2c[0]);
i2c_create_slave(bus, "aer915", 0x55);
wm = i2c_create_slave(bus, "wm8750", 0x1b);
mpu->i2s->opaque = wm;
mpu->i2s->codec_out = wm8750_dac_dat;
mpu->i2s->codec_in = wm8750_adc_dat;
wm8750_data_req_set(wm, mpu->i2s->data_req, mpu->i2s);
qdev_connect_gpio_out(mpu->gpio, Z2_GPIO_LCD_CS,
qemu_allocate_irqs(z2_lcd_cs, z2_lcd, 1)[0]);
if (kernel_filename) {
z2_binfo.kernel_filename = kernel_filename;
z2_binfo.kernel_cmdline = kernel_cmdline;
z2_binfo.initrd_filename = initrd_filename;
z2_binfo.board_id = 0x6dd;
arm_load_kernel(mpu->cpu, &z2_binfo);
}
}
static void z2_init(MachineState *machine)
{
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t sector_len = 0x10000;
PXA2xxState *mpu;
DriveInfo *dinfo;
int be;
void *z2_lcd;
I2CBus *bus;
DeviceState *wm;
/* Setup CPU & memory */
mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type);
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo && !qtest_enabled()) {
error_report("Flash image must be given with the "
"'pflash' parameter");
exit(1);
}
if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
sector_len, 4, 0, 0, 0, 0, be)) {
error_report("Error registering flash memory");
exit(1);
}
/* setup keypad */
pxa27x_register_keypad(mpu->kp, map, 0x100);
/* MMC/SD host */
pxa2xx_mmci_handlers(mpu->mmc,
NULL,
qdev_get_gpio_in(mpu->gpio, Z2_GPIO_SD_DETECT));
type_register_static(&zipit_lcd_info);
type_register_static(&aer915_info);
z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd");
bus = pxa2xx_i2c_bus(mpu->i2c[0]);
i2c_create_slave(bus, TYPE_AER915, 0x55);
wm = i2c_create_slave(bus, TYPE_WM8750, 0x1b);
mpu->i2s->opaque = wm;
mpu->i2s->codec_out = wm8750_dac_dat;
mpu->i2s->codec_in = wm8750_adc_dat;
wm8750_data_req_set(wm, mpu->i2s->data_req, mpu->i2s);
qdev_connect_gpio_out(mpu->gpio, Z2_GPIO_LCD_CS,
qemu_allocate_irq(z2_lcd_cs, z2_lcd, 0));
z2_binfo.kernel_filename = kernel_filename;
z2_binfo.kernel_cmdline = kernel_cmdline;
z2_binfo.initrd_filename = initrd_filename;
z2_binfo.board_id = 0x6dd;
arm_load_kernel(mpu->cpu, &z2_binfo);
}
