Esempio n. 1
0
/**
 * hibernation_restore - Quiesce devices and restore from a hibernation image.
 * @platform_mode: If set, use platform driver to prepare for the transition.
 *
 * This routine must be called with pm_mutex held.  If it is successful, control
 * reappears in the restored target kernel in hibernation_snapshot().
 */
int hibernation_restore(int platform_mode)
{
	int error;

	pm_prepare_console();
	suspend_console();
	ftrace_stop();
	pm_restrict_gfp_mask();
	error = dpm_suspend_start(PMSG_QUIESCE);
	if (!error) {
		error = resume_target_kernel(platform_mode);
		/*
		 * The above should either succeed and jump to the new kernel,
		 * or return with an error. Otherwise things are just
		 * undefined, so let's be paranoid.
		 */
		BUG_ON(!error);
	}
	dpm_resume_end(PMSG_RECOVER);
	pm_restore_gfp_mask();
	ftrace_start();
	resume_console();
	pm_restore_console();
	return error;
}
/**
 * suspend_devices_and_enter - Suspend devices and enter system sleep state.
 * @state: System sleep state to enter.
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;
	bool wakeup = false;

	if (!suspend_ops)
		return -ENOSYS;

	trace_machine_suspend(state);
	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	do {
		error = suspend_enter(state, &wakeup);
	} while (!error && !wakeup
		&& suspend_ops->suspend_again && suspend_ops->suspend_again());

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
#ifdef CONFIG_MACH_LGE_325_BOARD_VZW
#ifdef CONFIG_LGE_LOG_SERVICE
    if(sleep_enter == 1){
	    struct timespec ts;
	    struct rtc_time tm;
	    getnstimeofday(&ts);
	    rtc_time_to_tm(ts.tv_sec, &tm);
	    printk(KERN_UTC_WAKEUP "%d-%02d-%02d %02d:%02d:%02d.%06lu\n",
	                    tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
	                    tm.tm_hour, tm.tm_min, tm.tm_sec, ts.tv_nsec/1000);
	    sleep_enter = 0;
	}
#endif
#endif
	suspend_test_finish("resume devices");
	resume_console();
 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	trace_machine_suspend(PWR_EVENT_EXIT);
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 3
0
static inline int snapshot_restore(int platform_suspend)
{
	int error;

	mutex_lock(&pm_mutex);
	pm_prepare_console();
	if (platform_suspend) {
		error = platform_prepare();
		if (error)
			goto Finish;
	}
	suspend_console();
	error = device_suspend(PMSG_PRETHAW);
	if (error)
		goto Resume_devices;

	error = disable_nonboot_cpus();
	if (!error)
		error = swsusp_resume();

	enable_nonboot_cpus();
 Resume_devices:
	if (platform_suspend)
		platform_finish();

	device_resume();
	resume_console();
 Finish:
	pm_restore_console();
	mutex_unlock(&pm_mutex);
	return error;
}
Esempio n. 4
0
static bool s3c_cm_suspend_again(void)
{
	bool ret;
	int i = 0;

	if (!is_charger_manager_active())
		return false;

	while (s3c_cm_devices && s3c_cm_devices[i]) {
		pm_generic_resume(s3c_cm_devices[i]);
		i++;
	}

	if (s3c_cm_resume_console)
		resume_console();

	ret = cm_suspend_again();

	if (s3c_cm_resume_console)
		suspend_console();

	while (i > 0) {
		i--;
		pm_generic_suspend(s3c_cm_devices[i]);
	}

	return ret;
}
Esempio n. 5
0
/**
 *	suspend_devices_and_enter - suspend devices and enter the desired system sleep
 *			  state.
 *	@state:		  state to enter
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;

	if (!pm_ops)
		return -ENOSYS;

	if (pm_ops->set_target) {
		error = pm_ops->set_target(state);
		if (error)
			return error;
	}
	suspend_console();
	error = device_suspend(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "Some devices failed to suspend\n");
		goto Resume_console;
	}
	if (pm_ops->prepare) {
		error = pm_ops->prepare(state);
		if (error)
			goto Resume_devices;
	}
	error = disable_nonboot_cpus();
	if (!error)
		suspend_enter(state);

	enable_nonboot_cpus();
	pm_finish(state);
 Resume_devices:
	device_resume();
 Resume_console:
	resume_console();
	return error;
}
/**
 * suspend_devices_and_enter - Suspend devices and enter system sleep state.
 * @state: System sleep state to enter.
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;
	bool wakeup = false;

	if (!suspend_ops)
		return -ENOSYS;

	trace_machine_suspend(state);
	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	ftrace_stop();
	suspend_test_start();

	/* time stamp for start of device suspend */
	time_stamp_in_suspend_flow(DEV_SUS, true);

	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	do {
		error = suspend_enter(state, &wakeup);
	} while (!error && !wakeup
		&& suspend_ops->suspend_again && suspend_ops->suspend_again());

	if (wakeup)
		error = -EBUSY;

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);

	/* time stamp for end of device resume */
	time_stamp_in_suspend_flow(DEV_RES, false);

	suspend_test_finish("resume devices");
	ftrace_start();
	resume_console();
 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	trace_machine_suspend(PWR_EVENT_EXIT);
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 7
0
/**
 * hibernation_snapshot - Quiesce devices and create a hibernation image.
 * @platform_mode: If set, use platform driver to prepare for the transition.
 *
 * This routine must be called with pm_mutex held.
 */
int hibernation_snapshot(int platform_mode)
{
	pm_message_t msg = PMSG_RECOVER;
	int error;

	error = platform_begin(platform_mode);
	if (error)
		goto Close;

	error = dpm_prepare(PMSG_FREEZE);
	if (error)
		goto Complete_devices;

	/* Preallocate image memory before shutting down devices. */
	error = hibernate_preallocate_memory();
	if (error)
		goto Complete_devices;

	suspend_console();
	ftrace_stop();
	pm_restrict_gfp_mask();
	error = dpm_suspend(PMSG_FREEZE);
	if (error)
		goto Recover_platform;

	if (hibernation_test(TEST_DEVICES))
		goto Recover_platform;

	error = create_image(platform_mode);
	/*
	 * Control returns here (1) after the image has been created or the
	 * image creation has failed and (2) after a successful restore.
	 */

 Resume_devices:
	/* We may need to release the preallocated image pages here. */
	if (error || !in_suspend)
		swsusp_free();

	msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
	dpm_resume(msg);

	if (error || !in_suspend)
		pm_restore_gfp_mask();

	ftrace_start();
	resume_console();

 Complete_devices:
	dpm_complete(msg);

 Close:
	platform_end(platform_mode);
	return error;

 Recover_platform:
	platform_recover(platform_mode);
	goto Resume_devices;
}
Esempio n. 8
0
/**
 *	suspend_devices_and_enter - suspend devices and enter the desired system
 *				    sleep state.
 *	@state:		  state to enter
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error, ftrace_save;

	if (!suspend_ops)
		return -ENOSYS;

	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	ftrace_save = __ftrace_enabled_save();
	suspend_test_start();
	error = device_suspend(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	if (suspend_ops->prepare) {
		error = suspend_ops->prepare();
		if (error)
			goto Resume_devices;
	}

	if (suspend_test(TEST_PLATFORM))
		goto Finish;

	error = disable_nonboot_cpus();
	if (!error && !suspend_test(TEST_CPUS))
		suspend_enter(state);

	enable_nonboot_cpus();
 Finish:
	if (suspend_ops->finish)
		suspend_ops->finish();
 Resume_devices:
	suspend_test_start();
	device_resume(PMSG_RESUME);
	suspend_test_finish("resume devices");
	__ftrace_enabled_restore(ftrace_save);
	resume_console();
 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 9
0
int hibernation_platform_enter(void)
{
	int error;

	if (!hibernation_ops)
		return -ENOSYS;

	/*
	 * We have cancelled the power transition by running
	 * hibernation_ops->finish() before saving the image, so we should let
	 * the firmware know that we're going to enter the sleep state after all
	 */
	error = hibernation_ops->begin();
	if (error)
		goto Close;

	suspend_console();
	error = device_suspend(PMSG_HIBERNATE);
	if (error) {
		if (hibernation_ops->recover)
			hibernation_ops->recover();
		goto Resume_devices;
	}

	error = hibernation_ops->prepare();
	if (error)
		goto Resume_devices;

	error = disable_nonboot_cpus();
	if (error)
		goto Finish;

	device_pm_lock();
	local_irq_disable();
	error = device_power_down(PMSG_HIBERNATE);
	if (!error) {
		hibernation_ops->enter();
		/* We should never get here */
		while (1);
	}
	local_irq_enable();
	device_pm_unlock();

	/*
	 * We don't need to reenable the nonboot CPUs or resume consoles, since
	 * the system is going to be halted anyway.
	 */
 Finish:
	hibernation_ops->finish();
 Resume_devices:
	device_resume(PMSG_RESTORE);
	resume_console();
 Close:
	hibernation_ops->end();
	return error;
}
Esempio n. 10
0
/**
 * suspend_devices_and_enter - Suspend devices and enter system sleep state.
 * @state: System sleep state to enter.
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;
	bool wakeup = false;

	if (need_suspend_ops(state) && !suspend_ops)
		return -ENOSYS;

	trace_machine_suspend(state);
	if (need_suspend_ops(state) && suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	} else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->begin) {
		error = freeze_ops->begin();
		if (error)
			goto Close;
	}
	suspend_console();
	ftrace_stop();
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		log_suspend_abort_reason("Some devices failed to suspend");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	do {
		error = suspend_enter(state, &wakeup);
	} while (!error && !wakeup && need_suspend_ops(state)
		&& platform_suspend_again());

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
	suspend_test_finish("resume devices");
	ftrace_start();
	resume_console();
 Close:
	if (need_suspend_ops(state) && suspend_ops->end)
		suspend_ops->end();
	else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->end)
		freeze_ops->end();

	trace_machine_suspend(PWR_EVENT_EXIT);
	return error;

 Recover_platform:
	if (need_suspend_ops(state) && suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 11
0
/**
 * suspend_devices_and_enter - Suspend devices and enter system sleep state.
 * @state: System sleep state to enter.
 */
int suspend_devices_and_enter(suspend_state_t state)
{
    int error;
    bool wakeup = false;

    if (!suspend_ops)
        return -ENOSYS;

    trace_machine_suspend(state);
    if (suspend_ops->begin) {
        error = suspend_ops->begin(state);
        if (error)
            goto Close;
    }
    suspend_console();
    suspend_test_start();
    error = dpm_suspend_start(PMSG_SUSPEND);
    /*OPPO 2012-11-27 zhzhyon Add for reason*/
#ifdef CONFIG_VENDOR_EDIT
    if(has_wake_lock(WAKE_LOCK_SUSPEND))
    {
        goto Resume_devices;
    }
#endif
    /*OPPO 2012-11-27 zhzhyon Add end*/
    if (error) {
        printk(KERN_ERR "PM: Some devices failed to suspend\n");
        goto Recover_platform;
    }
    suspend_test_finish("suspend devices");
    if (suspend_test(TEST_DEVICES))
        goto Recover_platform;

    do {
        error = suspend_enter(state, &wakeup);
    } while (!error && !wakeup
             && suspend_ops->suspend_again && suspend_ops->suspend_again());

Resume_devices:
    suspend_test_start();
    dpm_resume_end(PMSG_RESUME);
    suspend_test_finish("resume devices");
    resume_console();
Close:
    if (suspend_ops->end)
        suspend_ops->end();
    trace_machine_suspend(PWR_EVENT_EXIT);
    return error;

Recover_platform:
    if (suspend_ops->recover)
        suspend_ops->recover();
    goto Resume_devices;
}
Esempio n. 12
0
int pm_suspend_disk(void)
{
	int error;

	error = prepare_processes();
	if (error)
		return error;

	if (pm_disk_mode == PM_DISK_TESTPROC)
		return 0;

	suspend_console();
	error = device_suspend(PMSG_FREEZE);
	if (error) {
		resume_console();
		printk("Some devices failed to suspend\n");
		goto Thaw;
	}

	if (pm_disk_mode == PM_DISK_TEST) {
		printk("swsusp debug: Waiting for 5 seconds.\n");
		mdelay(5000);
		goto Done;
	}

	pr_debug("PM: snapshotting memory.\n");
	in_suspend = 1;
	if ((error = swsusp_suspend()))
		goto Done;

	if (in_suspend) {
		device_resume();
		resume_console();
		pr_debug("PM: writing image.\n");
		error = swsusp_write();
		if (!error)
			power_down(pm_disk_mode);
		else {
			swsusp_free();
			goto Thaw;
		}
	} else {
		pr_debug("PM: Image restored successfully.\n");
	}

	swsusp_free();
 Done:
	device_resume();
	resume_console();
 Thaw:
	unprepare_processes();
	return error;
}
Esempio n. 13
0
int hibernation_snapshot(int platform_mode)
{
	int error;

	/* Free memory before shutting down devices. */
	error = swsusp_shrink_memory();
	if (error)
		return error;

	error = platform_begin(platform_mode);
	if (error)
		goto Close;

	suspend_console();
	error = device_suspend(PMSG_FREEZE);
	if (error)
		goto Recover_platform;

	if (hibernation_test(TEST_DEVICES))
		goto Recover_platform;

	error = platform_pre_snapshot(platform_mode);
	if (error || hibernation_test(TEST_PLATFORM))
		goto Finish;

	error = disable_nonboot_cpus();
	if (!error) {
		if (hibernation_test(TEST_CPUS))
			goto Enable_cpus;

		if (hibernation_testmode(HIBERNATION_TEST))
			goto Enable_cpus;

		error = create_image(platform_mode);
		/* Control returns here after successful restore */
	}
 Enable_cpus:
	enable_nonboot_cpus();
 Finish:
	platform_finish(platform_mode);
 Resume_devices:
	device_resume(in_suspend ?
		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
	resume_console();
 Close:
	platform_end(platform_mode);
	return error;

 Recover_platform:
	platform_recover(platform_mode);
	goto Resume_devices;
}
Esempio n. 14
0
/**
 * suspend_devices_and_enter - Suspend devices and enter system sleep state.
 * @state: System sleep state to enter.
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;
	bool wakeup = false;

	if (need_suspend_ops(state) && !suspend_ops)
		return -ENOSYS;

#ifdef CONFIG_TOI
	drop_pagecache();
#endif 

	trace_machine_suspend(state);
	if (need_suspend_ops(state) && suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	ftrace_stop();
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	do {
		error = suspend_enter(state, &wakeup);
	} while (!error && !wakeup && need_suspend_ops(state)
		&& suspend_ops->suspend_again && suspend_ops->suspend_again());

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
	suspend_test_finish("resume devices");
	ftrace_start();
	resume_console();
 Close:
	if (need_suspend_ops(state) && suspend_ops->end)
		suspend_ops->end();
	trace_machine_suspend(PWR_EVENT_EXIT);
	return error;

 Recover_platform:
	if (need_suspend_ops(state) && suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 15
0
/**
 *	suspend_devices_and_enter - suspend devices and enter the desired system
 *				    sleep state.
 *	@state:		  state to enter
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;
	gfp_t saved_mask;
	struct device l3_dev;

	if (!suspend_ops)
		return -ENOSYS;

	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	//omap_pm_set_min_bus_tput(&l3_dev, OCP_INITIATOR_AGENT, 100 * 1000 * 4);	// sookyoung.kim
	suspend_enter(state);

	//omap_pm_set_min_bus_tput(&l3_dev, OCP_INITIATOR_AGENT, 200 * 1000 * 4);	// sookyoung.kim
 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
// LGE_UPDATE_S
#if defined(CONFIG_WAKE_IRQ_PRINT)
	wakeup_irq_record_print();
#endif 
// LGE_UPDATE_E
	suspend_test_finish("resume devices");
	set_gfp_allowed_mask(saved_mask);
	resume_console();
 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 16
0
/**
 * suspend_devices_and_enter - Suspend devices and enter system sleep state.
 * @state: System sleep state to enter.
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;
	bool wakeup = false;

	if (need_suspend_ops(state) && !suspend_ops)
		return -ENOSYS;

	if (need_suspend_ops(state) && suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	} else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->begin) {
		error = freeze_ops->begin();
		if (error)
			goto Close;
	}
	suspend_console();
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		pr_err("PM: Some devices failed to suspend, or early wake event detected\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	do {
		error = suspend_enter(state, &wakeup);
	} while (!error && !wakeup && need_suspend_ops(state)
		&& suspend_ops->suspend_again && suspend_ops->suspend_again());

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
	suspend_test_finish("resume devices");
	resume_console();
 Close:
	if (need_suspend_ops(state) && suspend_ops->end)
		suspend_ops->end();
	else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->end)
		freeze_ops->end();

	return error;

 Recover_platform:
	if (need_suspend_ops(state) && suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 17
0
static int suspend_prepare(suspend_state_t state)
{
	int error;
	unsigned int free_pages;

	if (!pm_ops || !pm_ops->enter)
		return -EPERM;

	pm_prepare_console();

	if (freeze_processes()) {
		error = -EAGAIN;
		goto Thaw;
	}

	if ((free_pages = global_page_state(NR_FREE_PAGES))
			< FREE_PAGE_NUMBER) {
		pr_debug("PM: free some memory\n");
		shrink_all_memory(FREE_PAGE_NUMBER - free_pages);
		if (nr_free_pages() < FREE_PAGE_NUMBER) {
			error = -ENOMEM;
			printk(KERN_ERR "PM: No enough memory\n");
			goto Thaw;
		}
	}

	if (pm_ops->prepare) {
		if ((error = pm_ops->prepare(state)))
			goto Thaw;
	}

	suspend_console();
	error = device_suspend(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "Some devices failed to suspend\n");
		goto Resume_devices;
	}
	error = disable_nonboot_cpus();
	if (!error)
		return 0;

	enable_nonboot_cpus();
 Resume_devices:
	pm_finish(state);
	device_resume();
	resume_console();
 Thaw:
	thaw_processes();
	pm_restore_console();
	return error;
}
Esempio n. 18
0
/**
 * suspend_devices_and_enter - Suspend devices and enter system sleep state.
 * @state: System sleep state to enter.
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;
	bool wakeup = false;

	if (!suspend_ops)
		return -ENOSYS;

	trace_machine_suspend(state);
	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	do {
		error = suspend_enter(state, &wakeup);
	} while (!error && !wakeup
		&& suspend_ops->suspend_again && suspend_ops->suspend_again());

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
#ifdef CONFIG_ZTE_PLATFORM_RECORD_APP_AWAKE_SUSPEND_TIME
	pr_info("Resume DONE \n");	//LHX_PM_20110113 add log to indicate resume finish
	record_sleep_awake_time(false);		//LHX_PM_20110324_01 add code to record how long the APP sleeps or keeps awake 
#endif
	suspend_test_finish("resume devices");
	resume_console();
 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	trace_machine_suspend(PWR_EVENT_EXIT);
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 19
0
int hibernation_restore(int platform_mode)
{
	int error;

	pm_prepare_console();
	suspend_console();
	error = dpm_suspend_start(PMSG_QUIESCE);
	if (!error) {
		error = resume_target_kernel(platform_mode);
		dpm_resume_end(PMSG_RECOVER);
	}
	resume_console();
	pm_restore_console();
	return error;
}
Esempio n. 20
0
/**
 *	suspend_devices_and_enter - suspend devices and enter the desired system
 *				    sleep state.
 *	@state:		  state to enter
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;
	gfp_t saved_mask;

	if (!suspend_ops)
		return -ENOSYS;

	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}

	suspend_console();
	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES)) {
		printk(KERN_ERR "PM: suspend test failed\n");
		goto Recover_platform;
	}
	suspend_enter(state);

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
	suspend_test_finish("resume devices");
	set_gfp_allowed_mask(saved_mask);
	resume_console();

 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 21
0
/**
 * suspend_devices_and_enter - Suspend devices and enter system sleep state.
 * @state: System sleep state to enter.
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;
	bool wakeup = false;

	if (!sleep_state_supported(state))
		return -ENOSYS;

	pm_suspend_target_state = state;

	error = platform_suspend_begin(state);
	if (error)
		goto Close;

	suspend_console();
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		pr_err("Some devices failed to suspend, or early wake event detected\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	do {
		error = suspend_enter(state, &wakeup);
	} while (!error && !wakeup && platform_suspend_again(state));

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
	suspend_test_finish("resume devices");
	trace_suspend_resume(TPS("resume_console"), state, true);
	resume_console();
	trace_suspend_resume(TPS("resume_console"), state, false);

 Close:
	platform_resume_end(state);
	pm_suspend_target_state = PM_SUSPEND_ON;
	return error;

 Recover_platform:
	platform_recover(state);
	goto Resume_devices;
}
/**
 *	suspend_devices_and_enter - suspend devices and enter the desired system
 *				    sleep state.
 *	@state:		  state to enter
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;

	if (!suspend_ops)
		return -ENOSYS;

	trace_machine_suspend(state);
	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	suspend_test_start();
	suspend_expire_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_expire_finish("suspend devices");
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	suspend_enter(state);

 Resume_devices:
	suspend_test_start();
	suspend_expire_start();
	dpm_resume_end(PMSG_RESUME);
	suspend_expire_finish("resume devices");
	suspend_test_finish("resume devices");
	resume_console();
 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	trace_machine_suspend(PWR_EVENT_EXIT);
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 23
0
/**
 *	suspend_devices_and_enter - suspend devices and enter the desired system
 *				    sleep state.
 *	@state:		  state to enter
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;

	if (!suspend_ops)
		return -ENOSYS;

	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	pm_restrict_gfp_mask();
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	suspend_enter(state);

 Resume_devices:
	suspend_test_start();
	dpm_resume_end(PMSG_RESUME);
	ktime_resume_endtime=ktime_get();
	printk(KERN_ERR "<POWER>resume6[peripheral resume]take %llu ns\n",ktime_to_ns(ktime_sub(ktime_resume_endtime, ktime_resume_fromtime)));
	ktime_resume_fromtime=ktime_resume_endtime;
	suspend_test_finish("resume devices");
	pm_restore_gfp_mask();
	resume_console();
 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 24
0
void pre_suspend(void)
{
#ifdef CONFIG_NETFRONT
    suspend_netfront();
#endif

    suspend_xenbus();

    local_irq_disable();

    suspend_gnttab();

    suspend_time();

    suspend_console();

    suspend_events();
}
Esempio n. 25
0
int hibernation_restore(int platform_mode)
{
	int error;
	gfp_t saved_mask;

	pm_prepare_console();
	suspend_console();
	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
	error = dpm_suspend_start(PMSG_QUIESCE);
	if (!error) {
		error = resume_target_kernel(platform_mode);
		dpm_resume_end(PMSG_RECOVER);
	}
	set_gfp_allowed_mask(saved_mask);
	resume_console();
	pm_restore_console();
	return error;
}
Esempio n. 26
0
int hibernation_snapshot(int platform_mode)
{
	int error;
	gfp_t saved_mask;

	error = platform_begin(platform_mode);
	if (error)
		return error;

	/* Preallocate image memory before shutting down devices. */
	error = hibernate_preallocate_memory();
	if (error)
		goto Close;

	suspend_console();
	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
	error = dpm_suspend_start(PMSG_FREEZE);
	if (error)
		goto Recover_platform;

	if (hibernation_test(TEST_DEVICES))
		goto Recover_platform;

	error = create_image(platform_mode);
	/* Control returns here after successful restore */

 Resume_devices:
	/* We may need to release the preallocated image pages here. */
	if (error || !in_suspend)
		swsusp_free();

	dpm_resume_end(in_suspend ?
		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
	set_gfp_allowed_mask(saved_mask);
	resume_console();
 Close:
	platform_end(platform_mode);
	return error;

 Recover_platform:
	platform_recover(platform_mode);
	goto Resume_devices;
}
Esempio n. 27
0
/**
 *	suspend_devices_and_enter - suspend devices and enter the desired system
 *				    sleep state.
 *	@state:		  state to enter
 */
int suspend_devices_and_enter(suspend_state_t state)
{
	int error;

	if (!suspend_ops)
		return -ENOSYS;

	if (suspend_ops->begin) {
		error = suspend_ops->begin(state);
		if (error)
			goto Close;
	}
	suspend_console();
	suspend_test_start();
	error = dpm_suspend_start(PMSG_SUSPEND);
	if (error) {
		printk(KERN_ERR "PM: Some devices failed to suspend\n");
		goto Recover_platform;
	}
	suspend_test_finish("suspend devices");
	if (suspend_test(TEST_DEVICES))
		goto Recover_platform;

	suspend_enter(state);

 Resume_devices:
	suspend_test_start();
//20110727 [email protected]	Patch applied from P990 froyo MR-03	
    printk("# Drv Resume Star\n");
    star_emergency_restart("sys",61);
	dpm_resume_end(PMSG_RESUME);
	suspend_test_finish("resume devices");
	resume_console();
 Close:
	if (suspend_ops->end)
		suspend_ops->end();
	return error;

 Recover_platform:
	if (suspend_ops->recover)
		suspend_ops->recover();
	goto Resume_devices;
}
Esempio n. 28
0
int hibernation_snapshot(int platform_mode)
{
	int error;

	/* Free memory before shutting down devices. */
	error = swsusp_shrink_memory();
	if (error)
		return error;

	error = platform_start(platform_mode);
	if (error)
		return error;

	suspend_console();
	error = device_suspend(PMSG_FREEZE);
	if (error)
		goto Resume_console;

	error = platform_pre_snapshot(platform_mode);
	if (error)
		goto Resume_devices;

	error = disable_nonboot_cpus();
	if (!error) {
		if (hibernation_mode != HIBERNATION_TEST) {
			in_suspend = 1;
			error = create_image(platform_mode);
			/* Control returns here after successful restore */
		} else {
			printk("swsusp debug: Waiting for 5 seconds.\n");
			mdelay(5000);
		}
	}
	enable_nonboot_cpus();
 Resume_devices:
	platform_finish(platform_mode);
	device_resume();
 Resume_console:
	resume_console();
	return error;
}
Esempio n. 29
0
static inline int snapshot_suspend(int platform_suspend)
{
	int error;

	mutex_lock(&pm_mutex);
	/* Free memory before shutting down devices. */
	error = swsusp_shrink_memory();
	if (error)
		goto Finish;

	if (platform_suspend) {
		error = platform_prepare();
		if (error)
			goto Finish;
	}
	suspend_console();
	error = device_suspend(PMSG_FREEZE);
	if (error)
		goto Resume_devices;

	error = disable_nonboot_cpus();
	if (!error) {
		in_suspend = 1;
		error = swsusp_suspend();
	}
	enable_nonboot_cpus();
 Resume_devices:
	if (platform_suspend)
		platform_finish();

	device_resume();
	resume_console();
 Finish:
	mutex_unlock(&pm_mutex);
	return error;
}
Esempio n. 30
0
int hibernation_snapshot(int platform_mode)
{
	int error;

	error = platform_begin(platform_mode);
	if (error)
		return error;

	/* Free memory before shutting down devices. */
	error = swsusp_shrink_memory();
	if (error)
		goto Close;

	suspend_console();
	error = dpm_suspend_start(PMSG_FREEZE);
	if (error)
		goto Recover_platform;

	if (hibernation_test(TEST_DEVICES))
		goto Recover_platform;

	error = create_image(platform_mode);
	/* Control returns here after successful restore */

 Resume_devices:
	dpm_resume_end(in_suspend ?
		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
	resume_console();
 Close:
	platform_end(platform_mode);
	return error;

 Recover_platform:
	platform_recover(platform_mode);
	goto Resume_devices;
}