IV
PerlIOEncode_flush(pTHX_ PerlIO * f)
{
PerlIOEncode *e = PerlIOSelf(f, PerlIOEncode);
IV code = 0;
if (e->bufsv) {
dSP;
SV *str;
char *s;
STRLEN len;
SSize_t count = 0;
if ((PerlIOBase(f)->flags & PERLIO_F_WRBUF) && (e->base.ptr > e->base.buf)) {
if (e->inEncodeCall) return 0;
/* Write case - encode the buffer and write() to layer below */
PUSHSTACKi(PERLSI_MAGIC);
SPAGAIN;
ENTER;
SAVETMPS;
PUSHMARK(sp);
XPUSHs(e->enc);
SvCUR_set(e->bufsv, e->base.ptr - e->base.buf);
SvUTF8_on(e->bufsv);
XPUSHs(e->bufsv);
XPUSHs(e->chk);
PUTBACK;
e->inEncodeCall = 1;
if (call_method("encode", G_SCALAR) != 1) {
e->inEncodeCall = 0;
Perl_die(aTHX_ "panic: encode did not return a value");
}
e->inEncodeCall = 0;
SPAGAIN;
str = POPs;
PUTBACK;
s = SvPV(str, len);
count = PerlIO_write(PerlIONext(f),s,len);
if ((STRLEN)count != len) {
code = -1;
}
FREETMPS;
LEAVE;
POPSTACK;
if (PerlIO_flush(PerlIONext(f)) != 0) {
code = -1;
}
if (SvCUR(e->bufsv)) {
/* Did not all translate */
e->base.ptr = e->base.buf+SvCUR(e->bufsv);
return code;
}
}
else if ((PerlIOBase(f)->flags & PERLIO_F_RDBUF)) {
/* read case */
/* if we have any untranslated stuff then unread that first */
/* FIXME - unread is fragile is there a better way ? */
if (e->dataSV && SvCUR(e->dataSV)) {
s = SvPV(e->dataSV, len);
count = PerlIO_unread(PerlIONext(f),s,len);
if ((STRLEN)count != len) {
code = -1;
}
SvCUR_set(e->dataSV,0);
}
/* See if there is anything left in the buffer */
if (e->base.ptr < e->base.end) {
if (e->inEncodeCall) return 0;
/* Bother - have unread data.
re-encode and unread() to layer below
*/
PUSHSTACKi(PERLSI_MAGIC);
SPAGAIN;
ENTER;
SAVETMPS;
str = sv_newmortal();
sv_upgrade(str, SVt_PV);
SvPV_set(str, (char*)e->base.ptr);
SvLEN_set(str, 0);
SvCUR_set(str, e->base.end - e->base.ptr);
SvPOK_only(str);
SvUTF8_on(str);
PUSHMARK(sp);
XPUSHs(e->enc);
XPUSHs(str);
XPUSHs(e->chk);
PUTBACK;
e->inEncodeCall = 1;
if (call_method("encode", G_SCALAR) != 1) {
e->inEncodeCall = 0;
Perl_die(aTHX_ "panic: encode did not return a value");
}
e->inEncodeCall = 0;
SPAGAIN;
str = POPs;
PUTBACK;
s = SvPV(str, len);
count = PerlIO_unread(PerlIONext(f),s,len);
if ((STRLEN)count != len) {
code = -1;
}
FREETMPS;
LEAVE;
POPSTACK;
}
}
e->base.ptr = e->base.end = e->base.buf;
PerlIOBase(f)->flags &= ~(PERLIO_F_RDBUF | PERLIO_F_WRBUF);
}
return code;
}
STATIC char *
S_skipspace(pTHX_ register char *s, int incline)
{
if (PL_lex_formbrack && PL_lex_brackets <= PL_lex_formbrack) {
while (s < PL_bufend && SPACE_OR_TAB(*s))
s++;
return s;
}
for (;;) {
STRLEN prevlen;
SSize_t oldprevlen, oldoldprevlen;
SSize_t oldloplen = 0, oldunilen = 0;
while (s < PL_bufend && isSPACE(*s)) {
if (*s++ == '\n' && ((incline == 2) || PL_in_eval && !PL_rsfp && !incline))
incline(s);
}
/* comment */
if (s < PL_bufend && *s == '#') {
while (s < PL_bufend && *s != '\n')
s++;
if (s < PL_bufend) {
s++;
if (PL_in_eval && !PL_rsfp && !incline) {
incline(s);
continue;
}
}
}
/* also skip leading whitespace on the beginning of a line before deciding
* whether or not to recharge the linestr. --rafl
*/
while (s < PL_bufend && isSPACE(*s)) {
if (*s++ == '\n' && PL_in_eval && !PL_rsfp && !incline)
incline(s);
}
/* only continue to recharge the buffer if we're at the end
* of the buffer, we're not reading from a source filter, and
* we're in normal lexing mode
*/
if (s < PL_bufend || !PL_rsfp || PL_sublex_info.sub_inwhat ||
PL_lex_state == LEX_FORMLINE)
return s;
/* try to recharge the buffer */
if ((s = filter_gets(PL_linestr, PL_rsfp,
(prevlen = SvCUR(PL_linestr)))) == Nullch)
{
/* end of file. Add on the -p or -n magic */
if (PL_minus_p) {
sv_setpv(PL_linestr,
";}continue{print or die qq(-p destination: $!\\n);}");
PL_minus_n = PL_minus_p = 0;
}
else if (PL_minus_n) {
sv_setpvn(PL_linestr, ";}", 2);
PL_minus_n = 0;
}
else
sv_setpvn(PL_linestr,";", 1);
/* reset variables for next time we lex */
PL_oldoldbufptr = PL_oldbufptr = PL_bufptr = s = PL_linestart
= SvPVX(PL_linestr);
PL_bufend = SvPVX(PL_linestr) + SvCUR(PL_linestr);
PL_last_lop = PL_last_uni = Nullch;
/* In perl versions previous to p4-rawid: //depot/perl@32954 -P
* preprocessors were supported here. We don't support -P at all, even
* on perls that support it, and use the following chunk from blead
* perl. (rafl)
*/
/* Close the filehandle. Could be from
* STDIN, or a regular file. If we were reading code from
* STDIN (because the commandline held no -e or filename)
* then we don't close it, we reset it so the code can
* read from STDIN too.
*/
if ((PerlIO*)PL_rsfp == PerlIO_stdin())
PerlIO_clearerr(PL_rsfp);
else
(void)PerlIO_close(PL_rsfp);
PL_rsfp = Nullfp;
return s;
}
/* not at end of file, so we only read another line */
/* make corresponding updates to old pointers, for yyerror() */
oldprevlen = PL_oldbufptr - PL_bufend;
oldoldprevlen = PL_oldoldbufptr - PL_bufend;
if (PL_last_uni)
oldunilen = PL_last_uni - PL_bufend;
if (PL_last_lop)
oldloplen = PL_last_lop - PL_bufend;
PL_linestart = PL_bufptr = s + prevlen;
PL_bufend = s + SvCUR(PL_linestr);
s = PL_bufptr;
PL_oldbufptr = s + oldprevlen;
PL_oldoldbufptr = s + oldoldprevlen;
if (PL_last_uni)
PL_last_uni = s + oldunilen;
if (PL_last_lop)
PL_last_lop = s + oldloplen;
if (!incline)
incline(s);
/* debugger active and we're not compiling the debugger code,
* so store the line into the debugger's array of lines
*/
if (PERLDB_LINE && PL_curstash != PL_debstash) {
SV * const sv = NEWSV(85,0);
sv_upgrade(sv, SVt_PVMG);
sv_setpvn(sv,PL_bufptr,PL_bufend-PL_bufptr);
(void)SvIOK_on(sv);
SvIV_set(sv, 0);
av_store(CopFILEAV(PL_curcop),(I32)CopLINE(PL_curcop),sv);
}
}
}
IV
PerlIOEncode_fill(pTHX_ PerlIO * f)
{
PerlIOEncode *e = PerlIOSelf(f, PerlIOEncode);
dSP;
IV code = 0;
PerlIO *n;
SSize_t avail;
if (PerlIO_flush(f) != 0)
return -1;
n = PerlIONext(f);
if (!PerlIO_fast_gets(n)) {
/* Things get too messy if we don't have a buffer layer
push a :perlio to do the job */
char mode[8];
n = PerlIO_push(aTHX_ n, &PerlIO_perlio, PerlIO_modestr(f,mode), Nullsv);
if (!n) {
Perl_die(aTHX_ "panic: cannot push :perlio for %p",f);
}
}
PUSHSTACKi(PERLSI_MAGIC);
SPAGAIN;
ENTER;
SAVETMPS;
retry:
avail = PerlIO_get_cnt(n);
if (avail <= 0) {
avail = PerlIO_fill(n);
if (avail == 0) {
avail = PerlIO_get_cnt(n);
}
else {
if (!PerlIO_error(n) && PerlIO_eof(n))
avail = 0;
}
}
if (avail > 0 || (e->flags & NEEDS_LINES)) {
STDCHAR *ptr = PerlIO_get_ptr(n);
SSize_t use = (avail >= 0) ? avail : 0;
SV *uni;
char *s = NULL;
STRLEN len = 0;
e->base.ptr = e->base.end = (STDCHAR *) NULL;
(void) PerlIOEncode_get_base(aTHX_ f);
if (!e->dataSV)
e->dataSV = newSV(0);
if (SvTYPE(e->dataSV) < SVt_PV) {
sv_upgrade(e->dataSV,SVt_PV);
}
if (e->flags & NEEDS_LINES) {
/* Encoding needs whole lines (e.g. iso-2022-*)
search back from end of available data for
and line marker
*/
STDCHAR *nl = ptr+use-1;
while (nl >= ptr) {
if (*nl == '\n') {
break;
}
nl--;
}
if (nl >= ptr && *nl == '\n') {
/* found a line - take up to and including that */
use = (nl+1)-ptr;
}
else if (avail > 0) {
/* No line, but not EOF - append avail to the pending data */
sv_catpvn(e->dataSV, (char*)ptr, use);
PerlIO_set_ptrcnt(n, ptr+use, 0);
goto retry;
}
else if (!SvCUR(e->dataSV)) {
goto end_of_file;
}
}
if (SvCUR(e->dataSV)) {
/* something left over from last time - create a normal
SV with new data appended
*/
if (use + SvCUR(e->dataSV) > e->base.bufsiz) {
if (e->flags & NEEDS_LINES) {
/* Have to grow buffer */
e->base.bufsiz = use + SvCUR(e->dataSV);
PerlIOEncode_get_base(aTHX_ f);
}
else {
use = e->base.bufsiz - SvCUR(e->dataSV);
}
}
sv_catpvn(e->dataSV,(char*)ptr,use);
}
else {
/* Create a "dummy" SV to represent the available data from layer below */
if (SvLEN(e->dataSV) && SvPVX_const(e->dataSV)) {
Safefree(SvPVX_mutable(e->dataSV));
}
if (use > (SSize_t)e->base.bufsiz) {
if (e->flags & NEEDS_LINES) {
/* Have to grow buffer */
e->base.bufsiz = use;
PerlIOEncode_get_base(aTHX_ f);
}
else {
use = e->base.bufsiz;
}
}
SvPV_set(e->dataSV, (char *) ptr);
SvLEN_set(e->dataSV, 0); /* Hands off sv.c - it isn't yours */
SvCUR_set(e->dataSV,use);
SvPOK_only(e->dataSV);
}
SvUTF8_off(e->dataSV);
PUSHMARK(sp);
XPUSHs(e->enc);
XPUSHs(e->dataSV);
XPUSHs(e->chk);
PUTBACK;
if (call_method("decode", G_SCALAR) != 1) {
Perl_die(aTHX_ "panic: decode did not return a value");
}
SPAGAIN;
uni = POPs;
PUTBACK;
/* Now get translated string (forced to UTF-8) and use as buffer */
if (SvPOK(uni)) {
s = SvPVutf8(uni, len);
#ifdef PARANOID_ENCODE_CHECKS
if (len && !is_utf8_string((U8*)s,len)) {
Perl_warn(aTHX_ "panic: decode did not return UTF-8 '%.*s'",(int) len,s);
}
#endif
}
if (len > 0) {
/* Got _something */
/* if decode gave us back dataSV then data may vanish when
we do ptrcnt adjust - so take our copy now.
(The copy is a pain - need a put-it-here option for decode.)
*/
sv_setpvn(e->bufsv,s,len);
e->base.ptr = e->base.buf = (STDCHAR*)SvPVX(e->bufsv);
e->base.end = e->base.ptr + SvCUR(e->bufsv);
PerlIOBase(f)->flags |= PERLIO_F_RDBUF;
SvUTF8_on(e->bufsv);
/* Adjust ptr/cnt not taking anything which
did not translate - not clear this is a win */
/* compute amount we took */
use -= SvCUR(e->dataSV);
PerlIO_set_ptrcnt(n, ptr+use, (avail-use));
/* and as we did not take it it isn't pending */
SvCUR_set(e->dataSV,0);
} else {
/* Got nothing - assume partial character so we need some more */
/* Make sure e->dataSV is a normal SV before re-filling as
buffer alias will change under us
*/
s = SvPV(e->dataSV,len);
sv_setpvn(e->dataSV,s,len);
PerlIO_set_ptrcnt(n, ptr+use, (avail-use));
goto retry;
}
}
else {
end_of_file:
code = -1;
if (avail == 0)
PerlIOBase(f)->flags |= PERLIO_F_EOF;
else
PerlIOBase(f)->flags |= PERLIO_F_ERROR;
}
FREETMPS;
LEAVE;
POPSTACK;
return code;
}
void
lucy_RegexTokenizer_tokenize_str(lucy_RegexTokenizer *self,
const char *string, size_t string_len,
lucy_Inversion *inversion) {
uint32_t num_code_points = 0;
SV *wrapper = sv_newmortal();
#if (PERL_VERSION > 10)
REGEXP *rx = (REGEXP*)self->token_re;
regexp *rx_struct = (regexp*)SvANY(rx);
#else
REGEXP *rx = (REGEXP*)self->token_re;
regexp *rx_struct = rx;
#endif
char *string_beg = (char*)string;
char *string_end = string_beg + string_len;
char *string_arg = string_beg;
// Fake up an SV wrapper to feed to the regex engine.
sv_upgrade(wrapper, SVt_PV);
SvREADONLY_on(wrapper);
SvLEN(wrapper) = 0;
SvUTF8_on(wrapper);
// Wrap the string in an SV to please the regex engine.
SvPVX(wrapper) = string_beg;
SvCUR_set(wrapper, string_len);
SvPOK_on(wrapper);
while (pregexec(rx, string_arg, string_end, string_arg, 1, wrapper, 1)) {
#if ((PERL_VERSION >= 10) || (PERL_VERSION == 9 && PERL_SUBVERSION >= 5))
char *const start_ptr = string_arg + rx_struct->offs[0].start;
char *const end_ptr = string_arg + rx_struct->offs[0].end;
#else
char *const start_ptr = string_arg + rx_struct->startp[0];
char *const end_ptr = string_arg + rx_struct->endp[0];
#endif
uint32_t start, end;
// Get start and end offsets in Unicode code points.
for (; string_arg < start_ptr; num_code_points++) {
string_arg += lucy_StrHelp_UTF8_COUNT[(uint8_t)(*string_arg)];
if (string_arg > string_end) {
THROW(LUCY_ERR, "scanned past end of '%s'", string_beg);
}
}
start = num_code_points;
for (; string_arg < end_ptr; num_code_points++) {
string_arg += lucy_StrHelp_UTF8_COUNT[(uint8_t)(*string_arg)];
if (string_arg > string_end) {
THROW(LUCY_ERR, "scanned past end of '%s'", string_beg);
}
}
end = num_code_points;
// Add a token to the new inversion.
Lucy_Inversion_Append(inversion,
lucy_Token_new(
start_ptr,
(end_ptr - start_ptr),
start,
end,
1.0f, // boost always 1 for now
1 // position increment
)
);
}
}
