void spin_ms(u4_t msec)
{
u4_t tref = timer_ms(), diff;
do {
diff = time_diff(timer_ms(), tref);
} while (diff < msec);
}
void config_file_update()
{
int i, group;
static u4_t key_last_update;
const scan_code *kp, *lp;
key_last_t *kl;
key_last_t key[N_GROUPS];
for (i=1; i<N_GROUPS; i++) { key[i].key = 0; key[i].lp = 0; }
for (i=0; i<N_KEYS; i++) {
kp = &front_pnl_key[i];
if (kp->group == 0) continue;
assert(kp->group < N_GROUPS);
lp = &front_pnl_led[i];
if (LED_ON(lp)) { // state of key LED determines whether we consider it "pushed" or not
key[kp->group].key = KEY(i);
key[kp->group].lp = lp;
}
}
// check for state change of keys in a group
for (i=1; i<N_GROUPS; i++) {
kl = &key_last[i];
if (kl->key != key[i].key) {
kl->key = key[i].key;
kl->lp = key[i].lp;
key_need_update = TRUE;
}
}
// only update file periodically
if (key_need_update && (time_diff(timer_ms(), key_last_update) > 10000)) {
FILE *fp;
key_need_update = FALSE;
key_last_update = timer_ms();
sprintf(dbuf, "%s/.5370.%s.keys", ROOT_DIR, conf_profile);
scallz("fopen", fp = fopen(dbuf, "w"));
for (i=1; i<N_GROUPS; i++) {
if (key_last[i].key) {
//printf("store \"%s\": key 0x%02x %s\n", conf_profile, key_last[i].key, (key_last[i].lp)->name);
fprintf(fp, "rcl key 0x%02x %s\n", key_last[i].key, (key_last[i].lp)->name);
}
}
fclose(fp);
}
}
void handler_dev_arm_write(u2_t addr, u1_t data)
{
assert (addr == WREG_LDACCW || addr == WREG_LDACSTART || addr == WREG_LDACSTOP ||
addr == WREG_O2 || addr == WREG_O1 || addr == WREG_O3);
#ifdef DEBUG
if (trace_regs) {
if ((addr == WREG_O3) && isActive(O3_N3_OVRST, data)) printf("R3 "); else
if ((addr == WREG_O3) && isActive(O3_N0_OVRST, data)) printf("R0 "); else
printf("%s=%02x ", arm_wreg[addr - ADDR_ARM(0)], data);
}
#endif
// let PRU count N0/N3 overflows while measuring
// FIXME: is this test valid for all measurement modes? O2_ARM_EN instead? TI +/- vs +only mode?
if ((addr == WREG_O2) && isActive(O2_MAN_ARM, data)) {
num_meas++;
if (meas_time == 0) meas_time = timer_ms();
#ifdef DEBUG
if (trace_regs) { printf("* "); fflush(stdout); }
#endif
freq_record(0, REG_STR, 0, 0, 0, "* ");
if (use_pru) {
#if 0
//assert(pru->count == PRU_DONE);
if (pru->count != PRU_DONE) {
printf("write O2_MAN_ARM: pru->count != PRU_DONE? [i.e. PRU never saw EOM]\n");
}
#endif
bus_write(addr, data); // let arm command go through
n3_ovfl_sent = n0_ovfl_sent = ovfl_none = 0;
send_pru_cmd(PRU_CLEAR);
hold_off = TRUE;
pru->count = PRU_COUNT;
return;
}
}
// ignore WREG_O3 writes to clear overflow bits while PRU is doing it
if (use_pru && hold_off && (addr == WREG_O3)) {
return;
}
#ifdef FREQ_DEBUG
if (use_pru && !hold_off) {
if (addr == WREG_O3) {
if (isActive(O3_N3_OVRST, data) || isActive(O3_N0_OVRST, data))
freq_record(0, REG_READ, addr, data, 0, 0);
}
}
#endif
bus_write(addr, data);
}
int sender(int socket, FILE* fin, FILE* fout, int buf_size) {
int ret = 0;
char *buf;
int fp, fs;
int delta_t;
buf = (char*)malloc(max(buf_size, 1024));
if (buf == NULL) {
printf("Error on malloc() !\n");
return -1;
}
fp = ftell(fin);
fseek(fin, 0, SEEK_END);
fs = ftell(fin);
fs -= fp;
fseek(fin, fp, SEEK_SET);
fread((void*)buf, fs, 1, fin);
ret = sendl(socket, buf, fs, 0);
if (ret<0) {
printf("Error on sendl() !\n");
free(buf);
return -1;
}
printf("sent %d bytes\n", ret);
printf("receiving...\n");
printf("\n");
delta_t = timer_ms();
ret = recvw(socket, buf, buf_size, recvwcb, (void*)fout);
if (ret<0) {
printf("Error on recvw() !\n");
free(buf);
return -1;
}
delta_t = timer_ms() - delta_t;
printf("\n");
printf("received a total of %d bytes in %.3f seconds at %d KB/s\n", ret, (double)delta_t/1000.0, (int)floor((double)ret/(double)delta_t));
free(buf);
return ret;
}
/*------------------------------------------------------------------------
*
* PROTOTYPE : int32_t FLZ_AVCheck(void *data)
*
* DESCRIPTION :
*
*/
int32_t FLZ_AVCheck(void *data)
{
FLI_STRUCT *fli = (FLI_STRUCT*)data;
uint32_t temps = timer_ms();
if ( ((V3XA.State & 1)) || (temps>=(uint32_t)(FLZ_time+fli->Header.Struct.speed)) )
{
FLI_Unpack(fli);
FLZ_time = temps;
return !FLZ_SkipFrame;
}
return 0;
}
void web_server(void *param)
{
user_iface_t *ui = (user_iface_t *) param;
struct mg_server *server = ui->server;
const char *err;
u4_t current_timer = 0, last_timer = timer_ms();
while (1) {
mg_poll_server(server, 0); // passing 0 effects a poll
current_timer = timer_ms();
if (time_diff(current_timer, last_timer) > WEB_SERVER_POLL_MS) {
last_timer = current_timer;
mg_iterate_over_connections(server, iterate_callback);
}
NextTaskL("web server");
}
//mg_destroy_server(&server);
}
void TaskInit()
{
static bool init;
TASK *t;
//printf("MAX_TASKS %d\n", MAX_TASKS);
epoch = start_us = timer_us();
start_ms = timer_ms();
t = Tasks;
cur_task = cur_low = t;
prio_low = t;
t->next = t->prev = NULL;
task_init(t, 0, NULL, NULL, "main", LOW_PRIORITY);
}
// mechanism to spread out recall key presses over time
static bool kdelay(delay)
{
static u4_t key_delay, total_delay;
key_delay = time_diff(timer_ms(), key_epoch);
total_delay = delay + 100;
if ((key_delay >= total_delay) && (total_delay > key_threshold)) {
key_threshold = total_delay;
return TRUE;
}
return FALSE;
}
void layoutHome(void)
{
if (layoutLast == layoutHome || layoutLast == layoutScreensaver) {
oledClear();
} else {
layoutSwipe();
}
layoutLast = layoutHome;
const char *label = storage_isInitialized() ? storage_getLabel() : _("Go to trezor.io/start");
const uint8_t *homescreen = storage_getHomescreen();
if (homescreen) {
BITMAP b;
b.width = 128;
b.height = 64;
b.data = homescreen;
oledDrawBitmap(0, 0, &b);
} else {
if (label && strlen(label) > 0) {
oledDrawBitmap(44, 4, &bmp_logo48);
oledDrawStringCenter(OLED_HEIGHT - 8, label, FONT_STANDARD);
} else {
oledDrawBitmap(40, 0, &bmp_logo64);
}
}
if (storage_noBackup()) {
oledBox(0, 0, 127, 8, false);
oledDrawStringCenter(0, "SEEDLESS", FONT_STANDARD);
} else
if (storage_unfinishedBackup()) {
oledBox(0, 0, 127, 8, false);
oledDrawStringCenter(0, "BACKUP FAILED!", FONT_STANDARD);
} else
if (storage_needsBackup()) {
oledBox(0, 0, 127, 8, false);
oledDrawStringCenter(0, "NEEDS BACKUP!", FONT_STANDARD);
}
oledRefresh();
// Reset lock screen timeout
system_millis_lock_start = timer_ms();
}
u1_t handler_dev_display_read(u2_t addr)
{
u1_t data;
assert (addr == RREG_KEY_SCAN);
// For reasons that are not understood, when the -O3 optimized version of the app are run in
// auto-start mode the reset key push is not detected most of the time unless this delay is added.
// Oddly, this bug doesn't appear if the optimized version is run from the command line, which makes no sense.
// It doesn't appear to be code getting optimized away or a missing volatile declaration but rather timing related.
#ifndef DEBUG
delay(1);
#endif
data = bus_read(addr);
if (data != KEY_IDLE) {
process_key(data);
} else
if (sim_key) {
data = sim_key;
// simulate reset key down for an extended period
if (reset_key_down) {
if ((time_diff(timer_ms(), reset_key_down) > 1250)) reset_key_down = 0;
} else {
if (sim_running) {
if (!sim_key_intr) sim_key = 0; // allow it to be read twice, but generate interrupt only once
} else {
sim_key = 0; // only once for non-simulator uses
}
}
sim_key_intr = 0;
process_key(data);
}
return data;
}
void StatTask() {
int i, j, prn;
unsigned start = timer_ms();
while (!ready) TaskSleep(1000000);
while (1) {
UMS lat(StatLat), lon(StatLon);
UMS hms(StatSec/60/60);
TaskSleep(1000000);
if (print_stats == 2) {
static int fixes;
if (gps.fixes > fixes) {
fixes = gps.fixes;
if (StatLat) printf("wikimapia.org/#lang=en&lat=%9.6f&lon=%9.6f&z=18&m=b\n",
(StatNS=='S')? -StatLat:StatLat, (StatEW=='W')? -StatLon:StatLon);
}
continue;
}
printf("\n\n\n\n\n\n");
#if DECIM_CMP
printf(" CH PRN SNR CA ERR RSSI GAIN BITS WDOG SUB");
#else
// 12345 * 1234 123456 123456 123456 123456 123456 Up12345 123456 #########
printf(" CH PRN SNR RSSI GAIN BITS WDOG SUB NOVFL");
#endif
//printf(" LS CS LO SLO DLO CA SCA DCA");
printf("\n");
for (i=0; i<gps_chans; i++) {
stats_t *s = &stats[i];
char c1, c2;
double snew;
printf("%5d %c ", i+1, (stats_fft == i)? '*':' ');
show4(prn, prn);
show6(snr, snr);
#if DECIM_CMP
show6(snr, ca_dop);
printf(" ");
#endif
show6(rssi, rssi);
show6(rssi, gain);
show6(hold, hold);
show6(rssi, wdog);
printf("%c", s->ca_unlocked? 'U':' ');
printf("%c", (s->sub & (1<<(PARITY-1)))? 'p':' ');
s->sub &= ~(1<<(PARITY-1)); // clear parity
for (j=4; j>=0; j--) {
printf("%c", (s->sub & (1<<j))? '1'+j:' ');
if (s->sub_next & (1<<j)) {
s->sub |= 1<<j;
s->sub_next &= ~(1<<j);
}
}
show7(novfl, novfl);
printf(" ");
#if 0
if (s->rssi) printf("%6d:E %6d:P %6d:L ", s->pe/1000, s->pp/1000, s->pl/1000);
#endif
#if 0
show3(rssi, lo_dop);
show5(rssi, ca_dop);
if (s->dir == ' ') s->f_lo=s->lo, s->f_ca=s->ca;
snew = fabs(s->f_lo-s->lo);
if (snew > s->s_lo) s->s_lo = snew;
snew = fabs(s->f_ca-s->ca);
if (snew > s->s_ca) s->s_ca = snew;
showf7_1(lo, lo);
showf7_1(s_lo, s_lo);
showf7_1(d_lo, d_lo);
showf7_4(ca, ca);
showf7_4(s_ca, s_ca);
showf7_4(d_ca, d_ca);
c1 = c2 = '_';
if (s->rssi) {
s->to++;
if (s->lo < s->l_lo) { s->l_lo=s->lo; s->dir='v'; s->to=0; c1='v'; } else
if (s->lo > s->h_lo) { s->h_lo=s->lo; s->dir='^'; s->to=0; c1='^'; };
if (s->ca < s->l_ca) { s->l_ca=s->ca; s->to=0; c2='v'; } else
if (s->ca > s->h_ca) { s->h_ca=s->ca; s->to=0; c2='^'; };
}
printf("%c%c ", c1, c2);
if (s->rssi) printf("%3d%c ", s->to, s->dir); else printf(" ");
#endif
//if (s->dbug) printf("%9.6f %9.6f %6d %6d %6d ",
// s->dbug_d1, s->dbug_d2, s->dbug_i1, s->dbug_i2, s->dbug_i3);
printf(" ");
for (j=0; j < s->rssi*50/3000; j++) printf("#");
printf ("\n");
#if DECIM_CMP
printf(" ");
show6(snr2, snr2);
show6(snr2, ca_dop2);
show6(snr2, ca_dop-s->ca_dop2);
printf ("\n");
#endif
}
printf("\n");
NextTask("stat1");
printf(" SATS ");
if (gps.tracking) printf("tracking %d", gps.tracking);
if (gps.good) printf(", good %d", gps.good);
printf("\n");
printf(" LAT ");
if (StatLat) printf("%9.5fd %c %3dd %2dm %6.3fs %c ", StatLat, StatNS, lat.u, lat.m, lat.s, StatNS);
if (StatLat) printf("%3dd %6.3fm %c", lat.u, lat.fm, StatNS);
printf("\n");
printf(" LON ");
if (StatLat) printf("%9.5fd %c %3dd %2dm %6.3fs %c ", StatLon, StatEW, lon.u, lon.m, lon.s, StatEW);
if (StatLat) printf("%3dd %6.3fm %c", lon.u, lon.fm, StatEW);
printf("\n");
printf(" ALT ");
if (StatLat) printf("%1.0f m", StatAlt);
printf("\n");
printf(" TIME ");
if (StatDay != -1) printf("%s %02d:%02d:%02.0f GPST", Week[StatDay], hms.u, hms.m, hms.s);
printf("\n");
printf("FIXES ");
if (gps.fixes) printf("%d", gps.fixes);
printf("\n");
printf(" TTFF ");
if (stats_ttff) printf("%d:%02d", stats_ttff / 60, stats_ttff % 60);
printf("\n");
printf(" RUN ");
unsigned r = (timer_ms() - start)/1000;
if (r >= 3600) printf("%02d:", r / 3600);
printf("%02d:%02d", (r / 60) % 60, r % 60);
printf("\n");
printf(" MAP ");
if (StatLat) printf("wikimapia.org/#lang=en&lat=%9.6f&lon=%9.6f&z=18&m=b",
(StatNS=='S')? -StatLat:StatLat, (StatEW=='W')? -StatLon:StatLon);
printf("\n");
printf(" ECPU ");
printf("%4.1f%% cmds %d/%d", ecpu_use(), ecpu_cmds, ecpu_tcmds);
ecpu_cmds = ecpu_tcmds = 0;
printf("\n");
int offset = (int)(adc_clock - adc_clock_nom);
printf(" DECIM: %d FFT: %d -> %d CCF: %5.3fs MIN_SIG: %d ADC_CLK: %.6f %s%d (%d) ACQ: %d",
decim, FFT_LEN, FFT_LEN/decim, fft_msec, min_sig,
adc_clock/1000000.0, (offset >= 0)? "+":"", offset, gps.adc_clk_corr, gps.acquiring);
printf("\n");
printf("\n");
NextTask("stat2");
TaskDump();
}
}
bool change_settings_ui(menu_e *menu, u1_t key, bool *skip_first, cfg_t *cfg)
{
int i;
bool save_cfg = FALSE;
s1_t ki;
// scroll the menu list forward
if (key == KEY(TI)) {
if (*skip_first) {
*skip_first = FALSE;
} else {
*menu = *menu+1;
if (*menu == M_LAST) *menu = 0;
}
menu_up_down:
dsp_7seg_str(DSP_LEFT, menu_str[*menu], DSP_CLEAR);
if (((*menu == M_IP) || (*menu == M_NM) || (*menu == M_GW))) {
display_ipaddr(cfg->if_ipinfo[*menu-M_IP]);
}
wait_key_release();
} else
// scroll the menu list backward
if (key == KEY(FREQ)) {
if (*skip_first) {
*skip_first = FALSE;
} else {
if (*menu == 0) *menu = M_LAST;
*menu = *menu-1;
}
goto menu_up_down;
}
// inc/dec a byte of the ip/nm/gw address
// hold key down for auto-repeat
ki = 0;
for (i=0; settings_keys[i].key; i++) {
if (key == KEY(settings_keys[i].key)) {
ki = settings_keys[i].key_idx;
break;
}
}
if (ki) {
bool first_time = TRUE;
u4_t td, tref = timer_ms(), tcmp = 256, tinc = 32;
do {
td = time_diff(timer_ms(), tref);
if (((*menu == M_IP) || (*menu == M_NM) || (*menu == M_GW)) && (first_time || (td >= tcmp))) {
if (ki > 0) {
cfg->if_ipinfo[*menu-M_IP][ki-1]++;
} else {
cfg->if_ipinfo[*menu-M_IP][-ki-1]--;
}
display_ipaddr(cfg->if_ipinfo[*menu-M_IP]);
first_time = FALSE;
tcmp += tinc;
}
} while (key_down());
save_cfg = TRUE; // change has been made
}
return save_cfg;
}
// return zero if command processed locally
char *sim_input()
{
int i, n=0, k, key;
char *cp = ibuf;
char key_name[16];
if (!boot_time) boot_time = timer_ms();
// check for 5370 power loss (we may still be running via USB power)
if (!(bus_read(RREG_LDACSR) & DSR_VOK)) {
lprintf("5370 power loss\n");
usleep(1000000);
while (!(bus_read(RREG_LDACSR) & DSR_VOK)) {
sched_yield();
usleep(250000);
}
lprintf("5370 power on\n");
usleep(1000000);
sys_reset = TRUE;
return 0;
}
// can't recall any keys until self-test is finished
if (self_test && boot_time && (time_diff(timer_ms(), boot_time) > SELF_TEST_DELAY)) {
self_test = FALSE;
}
if (!self_test && !need_recall_file && !recall_active) {
config_file_update();
}
if (!self_test && need_recall_file) {
sprintf(dbuf, "%s/.5370.%s.keys", ROOT_DIR, conf_profile);
if ((kfp = fopen(dbuf, "r")) != NULL) {
key_epoch = timer_ms(); key_threshold = rcl_key = 0;
recall_active = TRUE;
} else {
printf("no key profile named \"%s\", will create one\n", conf_profile);
}
need_recall_file = FALSE;
}
if (recall_active && kfp && !self_test && kdelay(rcl_key * 256)) {
if (fgets(dbuf, N_DBUF, kfp)) {
if (sscanf(dbuf, "rcl key 0x%02x %16s", &key, key_name) == 2) {
cp = "k-\n"; n=3; // virtual command to get key press thru code below
rcl_key++;
}
} else {
fclose(kfp);
kfp = 0;
recall_active = FALSE;
}
}
#ifdef DEBUG
#ifdef HPIB_SIM
if (bug_stdev) {
if (kdelay(0)) hpib_input("tr\n", 0);
if (kdelay(500)) hpib_input("ta+0.05\n", 0);
if (kdelay(1000)) find_bug();
}
#endif
if (bug_freq) {
if (kdelay(0)) { cp = "k fn3\n"; n=6; }
if (kdelay(500) && gate1) { cp = "k gt1\n"; n=6; }
if (kdelay(500) && gate2) { cp = "k gt2\n"; n=6; }
if (kdelay(500) && gate3) { cp = "k gt3\n"; n=6; }
if (kdelay(500) && gate4) { cp = "k gt4\n"; n=6; }
//if (kdelay(1000)) { cp = "t\n"; n=2; }
//if (kdelay(1500)) { cp = "z\n"; n=2; }
}
#endif
#ifdef HPIB_SIM
// handle HPIB data over the network
char *nb;
i = net_poll(NET_HPIB, &nb);
if (i) {
if (strncmp(nb, "GET ", 4) == 0) {
nb = dbuf;
sprintf(nb, "attempted web connection on port %d, you want port %s instead\n",
HPIB_TCP_PORT, WEBSERVER_PORT);
printf("%s", nb);
// nothing we tried could get message to show up in browser, unlike below
//net_send(NET_HPIB, nb, strlen(nb), NO_COPY(TRUE), FLUSH(TRUE));
net_disconnect(NET_HPIB);
} else {
hpib_input(nb, i);
}
}
#endif
// handle keyboard commands over the network
if (!n) {
n = net_poll(NET_TELNET, &cp);
if (n) {
cp[n] = 0;
if (strncmp(cp, "GET ", 4) == 0) {
// this message will show up in browser due to net_send(NET_TELNET, ...) in lprintf()
lprintf("attempted web connection on port %d, you want port %s instead\n",
TELNET_TCP_PORT, WEBSERVER_PORT);
net_disconnect(NET_TELNET);
n = 0;
}
}
}
if (!n) {
n = webserver_to_app(cp, N_IBUF-2); // N_IBUF-2: leave room for \n\0
if (n) {
cp[n] = 0;
if (cp[n-1] != '\n') {
strcat(cp, "\n"); // make sure there is a trailing \n
n++;
}
}
}
if (!n) {
if (background_mode)
return 0;
n = read(tty, cp, N_IBUF);
if (n >= 1) cp[n] = 0;
}
if (n >= 1) {
if ((n == 1) || (*cp == '?') || (strcmp(cp, "help\n") == 0) || ((*cp == 'h') && (n == 2))) {
printf("commands:\n"
"d\t\tshow instrument display including unit and key LEDs\n"
"h <HPIB cmd>\temulate HPIB command input, e.g. \"h md2\"\n"
"h?\t\tprints reminder list of HPIB commands\n"
"k <fn1 .. fn4>\temulate function key 1-4 press, e.g. \"k fn1\" is TI key\n"
"k <gt1 .. gt4>\temulate gate time key 1-4 press\n"
"k <st1 .. st8>\temulate statistics key 1-8 press\n"
"k <ss1 .. ss5>\temulate sample size key 1-5 press\n"
"k <m1 .. m6>\temulate \"misc\" key 1-6 press\n"
"\t\t1 TI only, 2 +/- TI, 3 ext h.off, 4 per compl, 5 ext arm, 6 man rate\n"
"m\t\trun measurement extension example code\n"
"s\t\tshow measurement statistics\n"
"rc\t\tshow values of count-chain registers (one sample)\n"
"rcl|recall [name] load key settings from current or named profile\n"
"sto|store name save key settings to named profile\n"
"r\t\treset instrument\n"
"q\t\tquit\n"
"\n");
return 0;
}
if ((*cp == 'r') && (n == 2)) {
dsp_7seg_str(DSP_LEFT, "reset", DSP_CLEAR);
sys_reset = TRUE;
return 0;
}
if (*cp == 'q') {
printf("quit\n");
delay(1000); // let webserver show message
exit(0);
}
// process command starting with '-' as args
if (*cp == '-') {
#define NARGS 16
int argc; char *argv[NARGS];
argc = 1 + split(cp, &argc, &argv[1], NARGS);
sim_args(FALSE, argc, argv);
hpib_args(FALSE, argc, argv);
return 0;
}
if (*cp == 'm') {
meas_extend_example(0);
return 0;
}
// show what's on the 7 segment display, units display and key LEDs
if (*cp == 'd') {
dsp_7seg_translate(dbuf, 0);
printf("display: %s\n", dbuf);
dsp_key_leds_translate(dbuf); // which keys have their LEDs lit
printf("keys: %s\n", dbuf);
return 0;
}
// emulate a key press by causing an interrupt and returning the correct
// scan code for the subsequent read of the RREG_KEY_SCAN register
if (*cp == 'k') {
k = 0;
if (*(cp+1) == '-') { // key press from recall above
k = -1;
} else
if (sscanf(cp, "k fn%d", &n) == 1) { // function keys 1..4
if (n >= 1 && n <= 4)
k = skey_func[n-1];
} else
if (sscanf(cp, "k gt%d", &n) == 1) { // gate time keys 1..4
if (n >= 1 && n <= 4)
k = skey_gate[n-1];
} else
if (sscanf(cp, "k st%d", &n) == 1) { // statistics keys 1..8
if (n >= 1 && n <= 8)
k = skey_stat[n-1];
} else
if (sscanf(cp, "k ss%d", &n) == 1) { // sample size keys 1..5
if (n >= 1 && n <= 5)
k = skey_samp[n-1];
} else
if (sscanf(cp, "k m%d", &n) == 1) { // misc keys 1..6
if (n >= 1 && n <= 6)
k = skey_misc[n-1];
} else
#if defined(DEBUG) || defined(NET_PRINTF)
// for remote debugging of menu mode
if (strcmp(cp, "k r\n") == 0) {
k = RESET;
} else
if (strcmp(cp, "k rd\n") == 0) {
k = RESET;
reset_key_down = timer_ms();
} else
if (strcmp(cp, "k d\n") == 0) {
k = TI;
} else
if (strcmp(cp, "k u\n") == 0) {
k = FREQ;
} else
#endif
;
if (k > 0) {
sim_key = KEY(k);
sim_key_intr = 1;
printf("key press: %s (%d 0x%02x)\n", front_pnl_led[k].name, n, sim_key);
} else
if (k == -1) {
sim_key = key;
sim_key_intr = 1;
printf("recall: key 0x%02x %s\n", key, key_name);
} else {
cp[strlen(cp)-1] = 0;
printf("bad key command: \"%s\"\n", cp);
}
num_meas = 0;
return 0;
}
if (strcmp(cp, "rcl\n")==0 || strcmp(cp, "recall\n")==0) {
printf("recall key settings from current profile \"%s\"\n", conf_profile);
need_recall_file = TRUE;
return 0;
}
if (sscanf(cp, "rcl %16s", conf_profile)==1 || sscanf(cp, "recall %16s", conf_profile)==1) {
printf("recall key settings from profile \"%s\"\n", conf_profile);
need_recall_file = TRUE;
return 0;
}
if (strcmp(cp, "sto\n")==0 || strcmp(cp, "store\n")==0) {
printf("usage: sto|store name\n");
return 0;
}
if (sscanf(cp, "store %16s", conf_profile)==1 || sscanf(cp, "sto %16s", conf_profile)==1) {
printf("store key settings to profile \"%s\"\n", conf_profile);
return 0;
}
// measure number of measurements-per-second
if (*cp == 's' && n==2) {
if (num_meas) {
printf("%.1f meas/s\n", (float)num_meas / ((float)(timer_ms()-meas_time)/1000.0));
num_meas = meas_time = 0;
}
return 0;
}
#ifdef DEBUG
if (*cp == 'r' && cp[1] == 'c' && n==3) {
dump_regs = BIT_AREG(N0ST) | BIT_AREG(N1N2H) | BIT_AREG(N1N2L) | BIT_AREG(N0H) | BIT_AREG(N0L);
return 0;
}
if (*cp == 'z') {
//trace_regs ^= 1;
//trace_iDump(1);
hps ^= 1;
return 0;
}
#endif
#ifdef HPIB_SIM
// emulate input of an HPIB command
// e.g. "h md2" "h mr" "h md1" "h tb1" "h tb0"
if (*cp == 'h' && cp[1] == ' ') {
hpib_input(cp+2, 0); // presumes that hpib input is processed before another sim input
num_meas = 0;
return 0;
}
#endif
if (*cp == 'h' && cp[1] == '?') {
printf("HPIB command reminder list: (shown uppercase but may be typed as lowercase)\n"
"function: FN1 TI, FN2 trig lvl, FN3 freq, FN4 period\n"
"gate: GT1 single period, GT2 0.01s, GT3 0.1s, GT4 1s\n"
"statistics: ST1 mean, ST2 std dev, ST3 min, ST4 max, ST5 dsp ref, ST6 clr ref, ST7 dsp evts, ST8 set ref, ST9 dsp all\n"
"sample sizes: SS1 1, SS2 100, SS3 1k, SS4 10k, SS5 100k, SB <4 bytes> (set size for binary xfer)\n"
"mode: MD1 front pnl, MD2 hold until \"MR\" cmd, MD3 fast (only if addressed), MD4 fast (wait until addressed)\n"
"input: IN1 start+stop, IN2 stop only, IN3 start only, IN4 start+stop swap\n"
"slope: SA1 start+, SA2 start-, S01 stop+, S02 stop-, SL slope local, SR slope remote\n"
"arm select: AR1 +TI only, AR2 +/-TI\n"
"ext arming: EA0 dis, EA1 ena, SE1 slope+, SE2 slope-, EH0 hold-off dis, EH1 hold-off ena\n"
"int arming: IA1 auto, IA2 start ch arm, IA3 stop ch arm\n"
"trigger: TL trig local, TR trig remote, TA <volts> start lvl, TO <volts> stop lvl\n"
"binary mode: TB0 disable, TB1 enable, TB2 fast-mode enable (virtual cmd)\n"
"other: MR man rate, MI man input, PC period compl, TE teach (store), LN learn (recall)\n"
"\n");
return 0;
}
return cp; // pass to caller
} else {
return 0;
}
}
char *rx_server_request(struct mg_connection *mc, char *buf, size_t *size)
{
int i, j, n;
const char *s;
stream_t *st;
char *op = NULL, *oc, *lc;
int badp;
int rem = NREQ_BUF;
for (st=streams; st->uri; st++) {
if (strcmp(mc->uri, st->uri) == 0)
break;
}
if (!st->uri) return NULL;
if (down && (st->type != STREAM_PWD)) return NULL;
buf[0]=0;
switch (st->type) {
case STREAM_OTHERS:
conn_t *c;
op = buf;
oc = op;
for (c=conns; c<&conns[RX_CHANS*2]; c++) {
if (c->type == STREAM_SOUND) {
if (c->arrived) {
n = snprintf(oc, rem, "user(%d,\"%s\",\"%s\",%d);",
c->rx_channel, c->user, c->geo, c->freqHz);
} else {
n = snprintf(oc, rem, "user(%d,\"\",\"\",0);", c->rx_channel);
}
if (!rem || rem < n) { *oc = 0; break; } else { oc += n; rem -= n; }
}
}
// statistics
int stats;
stats=0;
n = sscanf(mc->query_string, "stats=%d", &stats);
//printf("%d %d <%s>\n", n, stats, mc->query_string);
lc = oc; // skip entire response if we run out of room
for (; stats; ) { // hack so we can use 'break' statements below
n = snprintf(oc, rem, "wrx_cpu_stats(");
if (!rem || rem < n) { oc = lc; *oc = 0; break; } else { oc += n; rem -= n; }
int user, sys, idle;
static int last_user, last_sys, last_idle;
user = sys = 0;
u4_t now = timer_ms();
static u4_t last_now;
float secs = (float)(now - last_now) / 1000;
last_now = now;
float del_user = 0;
float del_sys = 0;
float del_idle = 0;
FILE *pf = popen("cat /proc/stat", "r");
if (pf) {
char pfbuf[128];
pfbuf[0]=0;
n = fscanf(pf, "cpu %d %*d %d %d", &user, &sys, &idle);
//long clk_tick = sysconf(_SC_CLK_TCK);
del_user = (float)(user - last_user) / secs;
del_sys = (float)(sys - last_sys) / secs;
del_idle = (float)(idle - last_idle) / secs;
//printf("CPU %.1fs u=%.1f%% s=%.1f%% i=%.1f%%\n", secs, del_user, del_sys, del_idle);
pclose(pf);
n = snprintf(oc, rem,
"\"Beagle CPU %.0f%% usr / %.0f%% sys / %.0f%% idle, \"+",
del_user, del_sys, del_idle);
if (!rem || rem < n) { oc = lc; *oc = 0; break; } else { oc += n; rem -= n; }
last_user = user;
last_sys = sys;
last_idle = idle;
}
n = snprintf(oc, rem, "\"FPGA eCPU %.1f%%\");", ecpu_use());
if (!rem || rem < n) { oc = lc; *oc = 0; break; } else { oc += n; rem -= n; }
float sum_kbps = audio_kbps + waterfall_kbps + http_kbps;
n = snprintf(oc, rem,
"wrx_audio_stats(\"audio %.1f kB/s, waterfall %.1f kB/s (%.1f fps), http %.1f kB/s, total %.1f kB/s (%.1f kb/s)\");",
audio_kbps, waterfall_kbps, waterfall_fps, http_kbps, sum_kbps, sum_kbps*8);
if (!rem || rem < n) { *lc = 0; break; } else { oc += n; rem -= n; }
n = snprintf(oc, rem, "wrx_config(\"%d receiver channels, %d GPS channels\");", RX_CHANS, GPS_CHANS);
if (!rem || rem < n) { oc = lc; *oc = 0; break; } else { oc += n; rem -= n; }
stats = 0; // only run loop once
}
*size = oc-op;
if (*size == 0) {
buf[0] = ';';
*size = 1;
}
return buf;
break;
#define DX_SPACING_ZOOM_THRESHOLD 5
#define DX_SPACING_THRESHOLD_PX 5
case STREAM_DX:
float min, max;
int zoom, width;
n = sscanf(mc->query_string, "min=%f&max=%f&zoom=%d&width=%d", &min, &max, &zoom, &width);
if (n != 4) break;
float bw;
bw = max - min;
op = buf;
oc = op;
static bool first = true;
static int dx_lastx;
dx_lastx = 0;
for (i=0, j=0; i < ARRAY_LEN(dx); i++) {
dx_t *dp;
dp = &dx[i];
float freq;
freq = dp->freq;
if (freq < min || freq > max) continue;
// reduce dx label clutter
if (zoom <= DX_SPACING_ZOOM_THRESHOLD) {
int x = ((dp->freq - min) / bw) * width;
int diff = x - dx_lastx;
//printf("DX spacing %d %d %d %s\n", dx_lastx, x, diff, dp->text);
if (!first && diff < DX_SPACING_THRESHOLD_PX) continue;
dx_lastx = x;
first = false;
}
n = snprintf(oc, rem, "dx(%.3f,\"%s\",\'%s\');", dp->freq, dp->mode, dp->text);
if (!rem || rem < n) {
*oc = 0;
printf("STREAM_DX: buffer overflow %d/%d min=%f max=%f z=%d w=%d\n", i, ARRAY_LEN(dx), min, max, zoom, width);
break;
} else {
oc += n; rem -= n; j++;
}
}
//printf("STREAM_DX: %d <%s>\n", j, op);
*size = oc-op;
if (*size == 0) {
buf[0] = ';';
*size = 1;
}
return buf;
break;
case STREAM_PWD:
char pwd[32];
pwd[0]=0;
//printf("STREAM_PWD: <%s>\n", mc->query_string);
sscanf(mc->query_string, "pwd=%31s", pwd);
badp = strcmp(pwd, "kiwi");
if (badp) badp = strcmp(pwd, "Kiwi");
if (badp) lprintf("bad pwd from %s\n", mc->remote_ip);
op = buf;
oc = op;
n = snprintf(oc, rem, "wrx_setpwd(\"%s\",\"%s\");", badp? "bad":pwd, badp? "bad":WRX_KEY);
if (!rem || rem < n) { *oc = 0; } else { oc += n; rem -= n; }
*size = oc-op;
return buf;
break;
default:
break;
}
return NULL;
}
void _NextTaskL()
#endif
{
int i;
TASK *t, *tn;
u4_t now, quanta;
t = cur_task;
// don't switch until quanta expired (if any)
if (t->quanta && ((timer_ms() - start_ms) < t->quanta))
return;
ev(EV_NEXTTASK, "NextTask", "");
now = timer_us();
quanta = now - start_us;
t->usec += quanta;
if (slice) {
TSLICE *ts = &slices[slice-1];
ts->id = t->id;
ts->usec = quanta;
ts->wakeup = rx0_wakeup;
ts->twoke = now - rx0_twoke;
#ifdef DEBUG
ts->s = s;
#endif
slice++;
if (slice == NSLICES) {
u4_t maxv=0; int maxi=0;
for (i=0; i<NSLICES; i++) {
ts = &slices[i];
if (ts->usec > maxv) { maxv = ts->usec; maxi = i; }
}
for (i=0; i<NSLICES; i++) {
ts = &slices[i];
printf("%4d T%02d %7.3f %7.3f w%d %s %s %s %s\n",
i, ts->id, ((float) ts->usec) / 1e3, ((float) ts->twoke) / 1e3,
ts->wakeup, Tasks[ts->id].name,
ts->s? ts->s : "", ts->msg,
(i==maxi)? "############################################": (
(ts->usec>=2000.0)? "------------------------------------------":"") );
}
xit(0);
slice = 0;
}
}
if (setjmp(t->jb)) {
return;
}
//printf("P%d-%s %.3f ms pc %p\n", t->id, t->name, ((float) quanta) / 1e3, (void *) t->pc); fflush(stdout);
for (i=0; i<MAX_TASKS; i++) {
TASK *tp = Tasks + i;
if (tp->valid && tp->deadline && (tp->deadline < now)) {
tp->deadline = 0;
tp->stopped = FALSE;
tp->wakeup = TRUE;
//printf("wake T%02d\n", tp->id);
}
}
if (t->priority == HIGH_PRIORITY) {
do { // after a high priority finishes run next high priority
t = t->next;
} while (t && t->stopped);
if (!t) { // no other high priority, so run next low priority
t = cur_low;
do {
t = t->next;
if (!t) t = prio_low;
} while (t->stopped);
}
} else {
// run _all_ high priority after each low priority finishes
for (t = prio_high; t && t->stopped; t = t->next)
;
if (!t) { // no high priority so run next low priority
t = cur_task;
do {
t = t->next;
if (!t) t = prio_low;
} while (t->stopped);
}
}
cur_task = t;
if (t->priority == LOW_PRIORITY) cur_low = t;
t->run++;
//printf("N%d-%s pc %p\n", t->id, t->name, (void *) t->pc); fflush(stdout);
start_us = now;
if (t->quanta) start_ms = timer_ms();
longjmp(t->jb, 1);
}
void w2a_admin(void *param)
{
int n, i, j;
conn_t *conn = (conn_t *) param;
static char json_buf[16384];
u4_t ka_time = timer_sec();
// send initial values
send_msg(conn, SM_NO_DEBUG, "ADM init=%d", RX_CHANS);
nbuf_t *nb = NULL;
while (TRUE) {
if (nb) web_to_app_done(conn, nb);
n = web_to_app(conn, &nb);
if (n) {
char *cmd = nb->buf;
cmd[n] = 0; // okay to do this -- see nbuf.c:nbuf_allocq()
ka_time = timer_sec();
if (rx_common_cmd("W/F", conn, cmd))
continue;
//printf("ADMIN: %d <%s>\n", strlen(cmd), cmd);
i = strcmp(cmd, "SET init");
if (i == 0) {
continue;
}
i = strcmp(cmd, "SET gps_update");
if (i == 0) {
gps_stats_t::gps_chan_t *c;
char *cp = json_buf;
n = sprintf(cp, "{ \"FFTch\":%d, \"ch\":[ ", gps.FFTch); cp += n;
for (i=0; i < gps_chans; i++) {
c = &gps.ch[i];
int un = c->ca_unlocked;
n = sprintf(cp, "%s{ \"ch\":%d, \"prn\":%d, \"snr\":%d, \"rssi\":%d, \"gain\":%d, \"hold\":%d, \"wdog\":%d"
", \"unlock\":%d, \"parity\":%d, \"sub\":%d, \"sub_renew\":%d, \"novfl\":%d }",
i? ", ":"", i, c->prn, c->snr, c->rssi, c->gain, c->hold, c->wdog,
un, c->parity, c->sub, c->sub_renew, c->novfl); cp += n;
c->parity = 0;
for (j = 0; j < SUBFRAMES; j++) {
if (c->sub_renew & (1<<j)) {
c->sub |= 1<<j;
c->sub_renew &= ~(1<<j);
}
}
}
n = sprintf(cp, " ]"); cp += n;
UMS hms(gps.StatSec/60/60);
unsigned r = (timer_ms() - gps.start)/1000;
if (r >= 3600) {
n = sprintf(cp, ", \"run\":\"%d:%02d:%02d\"", r / 3600, (r / 60) % 60, r % 60); cp += n;
} else {
n = sprintf(cp, ", \"run\":\"%d:%02d\"", (r / 60) % 60, r % 60); cp += n;
}
if (gps.ttff) {
n = sprintf(cp, ", \"ttff\":\"%d:%02d\"", gps.ttff / 60, gps.ttff % 60); cp += n;
} else {
n = sprintf(cp, ", \"ttff\":null"); cp += n;
}
if (gps.StatDay != -1) {
n = sprintf(cp, ", \"gpstime\":\"%s %02d:%02d:%02.0f\"", Week[gps.StatDay], hms.u, hms.m, hms.s); cp += n;
} else {
n = sprintf(cp, ", \"gpstime\":null"); cp += n;
}
if (gps.StatLat) {
n = sprintf(cp, ", \"lat\":\"%8.6f %c\"", gps.StatLat, gps.StatNS); cp += n;
n = sprintf(cp, ", \"lon\":\"%8.6f %c\"", gps.StatLon, gps.StatEW); cp += n;
n = sprintf(cp, ", \"alt\":\"%1.0f m\"", gps.StatAlt); cp += n;
n = sprintf(cp, ", \"map\":\"<a href='http://wikimapia.org/#lang=en&lat=%8.6f&lon=%8.6f&z=18&m=b' target='_blank'>wikimapia.org</a>\"",
gps.sgnLat, gps.sgnLon); cp += n;
} else {
n = sprintf(cp, ", \"lat\":null"); cp += n;
}
n = sprintf(cp, ", \"acq\":%d, \"track\":%d, \"good\":%d, \"fixes\":%d, \"adc_clk\":%.6f, \"adc_corr\":%d",
gps.acquiring? 1:0, gps.tracking, gps.good, gps.fixes, (adc_clock - adc_clock_offset)/1e6, gps.adc_clk_corr); cp += n;
n = sprintf(cp, " }"); cp += n;
send_encoded_msg_mc(conn->mc, "ADM", "gps_update", "%s", json_buf);
continue;
}
i = strcmp(cmd, "SET sdr_hu_update");
if (i == 0) {
gps_stats_t::gps_chan_t *c;
char *cp = json_buf;
n = sprintf(cp, "{ "); cp += n;
if (gps.StatLat) {
n = sprintf(cp, "\"lat\":\"%8.6f\", \"lon\":\"%8.6f\"",
gps.sgnLat, gps.sgnLon); cp += n;
}
n = sprintf(cp, " }"); cp += n;
send_encoded_msg_mc(conn->mc, "ADM", "sdr_hu_update", "%s", json_buf);
continue;
}
int force_check;
i = sscanf(cmd, "SET force_check=%d force_build=%d", &force_check, &force_build);
if (i == 2) {
check_for_update(force_check);
continue;
}
i = strcmp(cmd, "SET reload_index_params");
if (i == 0) {
reload_index_params();
continue;
}
i = strcmp(cmd, "SET extint_load_extension_configs");
if (i == 0) {
extint_load_extension_configs(conn);
continue;
}
i = strcmp(cmd, "SET restart");
if (i == 0) {
lprintf("ADMIN: restart requested by admin..\n");
exit(0);
}
i = strcmp(cmd, "SET reboot");
if (i == 0) {
lprintf("ADMIN: reboot requested by admin..\n");
system("reboot");
while (true)
usleep(100000);
}
i = strcmp(cmd, "SET power_off");
if (i == 0) {
lprintf("ADMIN: power off requested by admin..\n");
system("poweroff");
while (true)
usleep(100000);
}
printf("ADMIN: unknown command: <%s>\n", cmd);
continue;
}
conn->keep_alive = timer_sec() - ka_time;
bool keepalive_expired = (conn->keep_alive > KEEPALIVE_SEC);
if (keepalive_expired) {
printf("ADMIN KEEP-ALIVE EXPIRED\n");
rx_server_remove(conn);
return;
}
TaskSleep(250000);
}
}
int main(int argn, char ** argv) {
if(argn < 4) {
usage("Wrong argument count", *argv);
}
// read width and height
const int w = atoi(argv[1]);
const int h = atoi(argv[2]);
if(w < 1 || h < 1) {
usage("Both width and height must be positive integers", *argv);
}
const int pix_count = w * h;
// read sigma and prepare normalized kernel (sum = 1)
const float sigma = atof(argv[3]);
float kernel[MAX_KERNEL_RADIUS + 1];
float kernel_sum = 0.0f;
for(int k = 0; k <= MAX_KERNEL_RADIUS; k++) {
kernel_sum += kernel[k] = gaussian(sigma, k);
}
kernel_sum = 2.0 * kernel_sum - kernel[0];
for(int k = 0; k <= MAX_KERNEL_RADIUS; k++) {
kernel[k] /= kernel_sum;
}
// dump the kernel
printf("Convolution kernel:");
for(int k = -MAX_KERNEL_RADIUS; k <= MAX_KERNEL_RADIUS; k++) {
printf(" %f", kernel[k < 0 ? -k : k]);
}
printf("\n");
// prepare buffers
uint8_t * const data_ptr = (uint8_t*)malloc(pix_count);
uint8_t * const temp_ptr = (uint8_t*)malloc(pix_count);
// measure time of processing of all images
const double begin = timer_ms();
for(int i = 4; i < argn; i++) {
// read input data
printf("Processing '%s'\n", argv[i]);
FILE * const src_file = fopen(argv[i], "rb");
if(NULL == src_file || 1 != fread(data_ptr, pix_count, 1, src_file)) {
error(argv[i]);
}
fclose(src_file);
// vertical pass: for each pixel
uint8_t * out_pix_ptr = temp_ptr;
for(int y = 0; y < h; y++) {
for(int x = 0; x < w; x++) {
// sum up all weighted neighbors and the pixel itself
float result = kernel[0] * get_pix(data_ptr, w, h, x, y);
for(int k = 1; k <= MAX_KERNEL_RADIUS; k++) {
result += kernel[k] * (get_pix(data_ptr, w, h, x, y + k)
+ get_pix(data_ptr, w, h, x, y - k));
}
*(out_pix_ptr++) = saturate((int)result, 256);
}
}
// horizontal pass: for each pixel
out_pix_ptr = data_ptr;
for(int y = 0; y < h; y++) {
for(int x = 0; x < w; x++) {
// sum up all weighted neighbors and the pixel itself
float result = kernel[0] * get_pix(temp_ptr, w, h, x, y);
for(int k = 1; k <= MAX_KERNEL_RADIUS; k++) {
result += kernel[k] * (get_pix(temp_ptr, w, h, x + k, y)
+ get_pix(temp_ptr, w, h, x - k, y));
}
*(out_pix_ptr++) = saturate((int)result, 256);
}
}
// compose output filename
char out_path[MAX_PATH_LEN + 1];
snprintf(out_path, MAX_PATH_LEN, "%s.out.gray", argv[i]);
// write data to output file
FILE * const out_file = fopen(out_path, "wb");
if(NULL == out_file || 1 != fwrite(data_ptr, pix_count, 1, out_file)) {
error(out_path);
}
fclose(out_file);
}
const double end = timer_ms();
// print total time
printf("time: %f ms, %d images => %f ms/image\n",
end - begin, argn - 4, (end - begin) / (argn - 4));
// cleanup
free(temp_ptr);
free(data_ptr);
return 0;
}
