/* mdio_bus_match
*
* description: Given a PHY device, and a PHY driver, return 1 if
* the driver supports the device. Otherwise, return 0
*/
static int mdio_bus_match(struct device *dev, struct device_driver *drv)
{
struct phy_device *phydev = to_phy_device(dev);
struct phy_driver *phydrv = to_phy_driver(drv);
return (phydrv->phy_id == (phydev->phy_id & phydrv->phy_id_mask));
}
static void mdio_bus_remove(struct device_d *_dev)
{
struct phy_device *dev = to_phy_device(_dev);
struct phy_driver *drv = to_phy_driver(_dev->driver);
if (drv->remove)
drv->remove(dev);
free(dev->cdev.name);
devfs_remove(&dev->cdev);
}
static int mdio_bus_probe(struct device_d *_dev)
{
struct phy_device *dev = to_phy_device(_dev);
struct phy_driver *drv = to_phy_driver(_dev->driver);
int ret;
if (drv->probe) {
ret = drv->probe(dev);
if (ret)
goto err;
}
if (dev->dev_flags) {
if (dev->dev_flags & PHYLIB_FORCE_10) {
dev->speed = SPEED_10;
dev->duplex = DUPLEX_FULL;
dev->autoneg = !AUTONEG_ENABLE;
dev->force = 1;
dev->link = 1;
} else if (dev->dev_flags & PHYLIB_FORCE_100) {
dev->speed = SPEED_100;
dev->duplex = DUPLEX_FULL;
dev->autoneg = !AUTONEG_ENABLE;
dev->force = 1;
dev->link = 1;
}
}
/* Start out supporting everything. Eventually,
* a controller will attach, and may modify one
* or both of these values */
dev->supported = drv->features;
dev->advertising = drv->features;
dev_add_param_int_ro(&dev->dev, "phy_addr", dev->addr, "%d");
dev_add_param_int_ro(&dev->dev, "phy_id", dev->phy_id, "0x%08x");
dev->cdev.name = asprintf("phy%d", _dev->id);
dev->cdev.size = 64;
dev->cdev.ops = &phydev_ops;
dev->cdev.priv = dev;
dev->cdev.dev = _dev;
devfs_create(&dev->cdev);
return 0;
err:
return ret;
}
/* phy_probe
*
* description: Take care of setting up the phy_device structure,
* set the state to READY (the driver's init function should
* set it to STARTING if needed).
*/
static int phy_probe(struct device *dev)
{
struct phy_device *phydev;
struct phy_driver *phydrv;
struct device_driver *drv;
int err = 0;
phydev = to_phy_device(dev);
/* Make sure the driver is held.
* XXX -- Is this correct? */
drv = get_driver(phydev->dev.driver);
phydrv = to_phy_driver(drv);
phydev->drv = phydrv;
/* Disable the interrupt if the PHY doesn't support it */
if (!(phydrv->flags & PHY_HAS_INTERRUPT))
phydev->irq = PHY_POLL;
spin_lock(&phydev->lock);
/* Start out supporting everything. Eventually,
* a controller will attach, and may modify one
* or both of these values */
phydev->supported = phydrv->features;
phydev->advertising = phydrv->features;
/* Set the state to READY by default */
phydev->state = PHY_READY;
if (phydev->drv->probe)
err = phydev->drv->probe(phydev);
spin_unlock(&phydev->lock);
if (err < 0)
return err;
if (phydev->drv->config_init)
err = phydev->drv->config_init(phydev);
return err;
}
static int mdio_bus_probe(struct device_d *_dev)
{
struct phy_device *dev = to_phy_device(_dev);
struct phy_driver *drv = to_phy_driver(_dev->driver);
int ret;
char str[16];
dev->attached_dev->phydev = dev;
if (drv->probe) {
ret = drv->probe(dev);
if (ret)
goto err;
}
if (dev->dev_flags) {
if (dev->dev_flags & PHYLIB_FORCE_10) {
dev->speed = SPEED_10;
dev->duplex = DUPLEX_FULL;
dev->autoneg = !AUTONEG_ENABLE;
dev->force = 1;
dev->link = 1;
} else if (dev->dev_flags & PHYLIB_FORCE_100) {
dev->speed = SPEED_100;
dev->duplex = DUPLEX_FULL;
dev->autoneg = !AUTONEG_ENABLE;
dev->force = 1;
dev->link = 1;
}
}
/* Start out supporting everything. Eventually,
* a controller will attach, and may modify one
* or both of these values */
dev->supported = drv->features;
dev->advertising = drv->features;
ret = phy_init_hw(dev);
if (ret)
goto err;
/* Sanitize settings based on PHY capabilities */
if ((dev->supported & SUPPORTED_Autoneg) == 0)
dev->autoneg = AUTONEG_DISABLE;
sprintf(str, "%d", dev->addr);
dev_add_param_fixed(&dev->dev, "phy_addr", str);
sprintf(str, "0x%08x", dev->phy_id);
dev_add_param_fixed(&dev->dev, "phy_id", str);
dev->cdev.name = asprintf("phy%d", _dev->id);
dev->cdev.size = 64;
dev->cdev.ops = &phydev_ops;
dev->cdev.priv = dev;
dev->cdev.dev = _dev;
devfs_create(&dev->cdev);
return 0;
err:
dev->attached_dev->phydev = NULL;
dev->attached_dev = NULL;
return ret;
}
