int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_fh *fh,
struct v4l2_subdev_selection *sel)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *crop;
/* Cropping is implemented on the sink pad. */
if (sel->pad != RWPF_PAD_SINK)
return -EINVAL;
if (sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
/* Make sure the crop rectangle is entirely contained in the image. The
* WPF top and left offsets are limited to 255.
*/
format = vsp1_entity_get_pad_format(&rwpf->entity, fh, RWPF_PAD_SINK,
sel->which);
sel->r.left = min_t(unsigned int, sel->r.left, format->width - 2);
sel->r.top = min_t(unsigned int, sel->r.top, format->height - 2);
if (rwpf->entity.type == VSP1_ENTITY_WPF) {
sel->r.left = min_t(unsigned int, sel->r.left, 255);
sel->r.top = min_t(unsigned int, sel->r.top, 255);
}
int vsp1_rwpf_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_frame_size_enum *fse)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_mbus_framefmt *format;
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg, fse->pad,
fse->which);
if (fse->index || fse->code != format->code)
return -EINVAL;
if (fse->pad == RWPF_PAD_SINK) {
fse->min_width = RWPF_MIN_WIDTH;
fse->max_width = rwpf->max_width;
fse->min_height = RWPF_MIN_HEIGHT;
fse->max_height = rwpf->max_height;
} else {
/* The size on the source pad are fixed and always identical to
* the size on the sink pad.
*/
fse->min_width = format->width;
fse->max_width = format->width;
fse->min_height = format->height;
fse->max_height = format->height;
}
return 0;
}
int vsp1_rwpf_get_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_mbus_framefmt *format;
/* Cropping is implemented on the sink pad. */
if (sel->pad != RWPF_PAD_SINK)
return -EINVAL;
switch (sel->target) {
case V4L2_SEL_TGT_CROP:
sel->r = *vsp1_rwpf_get_crop(rwpf, cfg, sel->which);
break;
case V4L2_SEL_TGT_CROP_BOUNDS:
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg,
RWPF_PAD_SINK, sel->which);
sel->r.left = 0;
sel->r.top = 0;
sel->r.width = format->width;
sel->r.height = format->height;
break;
default:
return -EINVAL;
}
return 0;
}
int vsp1_rwpf_get_format(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
fmt->format = *vsp1_entity_get_pad_format(&rwpf->entity, cfg, fmt->pad,
fmt->which);
return 0;
}
static void rpf_configure_frame(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl,
struct vsp1_dl_body *dlb)
{
struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev);
vsp1_rpf_write(rpf, dlb, VI6_RPF_VRTCOL_SET,
rpf->alpha << VI6_RPF_VRTCOL_SET_LAYA_SHIFT);
vsp1_rpf_write(rpf, dlb, VI6_RPF_MULT_ALPHA, rpf->mult_alpha |
(rpf->alpha << VI6_RPF_MULT_ALPHA_RATIO_SHIFT));
vsp1_pipeline_propagate_alpha(pipe, dlb, rpf->alpha);
}
int vsp1_rwpf_set_format(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *crop;
/* Default to YUV if the requested format is not supported. */
if (fmt->format.code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
fmt->format.code != MEDIA_BUS_FMT_AYUV8_1X32)
fmt->format.code = MEDIA_BUS_FMT_AYUV8_1X32;
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg, fmt->pad,
fmt->which);
if (fmt->pad == RWPF_PAD_SOURCE) {
/* The RWPF performs format conversion but can't scale, only the
* format code can be changed on the source pad.
*/
format->code = fmt->format.code;
fmt->format = *format;
return 0;
}
format->code = fmt->format.code;
format->width = clamp_t(unsigned int, fmt->format.width,
RWPF_MIN_WIDTH, rwpf->max_width);
format->height = clamp_t(unsigned int, fmt->format.height,
RWPF_MIN_HEIGHT, rwpf->max_height);
format->field = V4L2_FIELD_NONE;
format->colorspace = V4L2_COLORSPACE_SRGB;
fmt->format = *format;
/* Update the sink crop rectangle. */
crop = vsp1_rwpf_get_crop(rwpf, cfg, fmt->which);
crop->left = 0;
crop->top = 0;
crop->width = fmt->format.width;
crop->height = fmt->format.height;
/* Propagate the format to the source pad. */
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg, RWPF_PAD_SOURCE,
fmt->which);
*format = fmt->format;
return 0;
}
static int wpf_s_stream(struct v4l2_subdev *subdev, int enable)
{
struct vsp1_rwpf *wpf = to_rwpf(subdev);
struct vsp1_device *vsp1 = wpf->entity.vsp1;
if (enable)
return 0;
/* Write to registers directly when stopping the stream as there will be
* no pipeline run to apply the display list.
*/
vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), 0);
vsp1_write(vsp1, wpf->entity.index * VI6_WPF_OFFSET +
VI6_WPF_SRCRPF, 0);
return 0;
}
int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{
struct vsp1_rwpf *rwpf = to_rwpf(subdev);
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *crop;
/* Cropping is implemented on the sink pad. */
if (sel->pad != RWPF_PAD_SINK)
return -EINVAL;
if (sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
/* Make sure the crop rectangle is entirely contained in the image. The
* WPF top and left offsets are limited to 255.
*/
format = vsp1_entity_get_pad_format(&rwpf->entity, cfg, RWPF_PAD_SINK,
sel->which);
/* Restrict the crop rectangle coordinates to multiples of 2 to avoid
* shifting the color plane.
*/
if (format->code == MEDIA_BUS_FMT_AYUV8_1X32) {
sel->r.left = ALIGN(sel->r.left, 2);
sel->r.top = ALIGN(sel->r.top, 2);
sel->r.width = round_down(sel->r.width, 2);
sel->r.height = round_down(sel->r.height, 2);
}
sel->r.left = min_t(unsigned int, sel->r.left, format->width - 2);
sel->r.top = min_t(unsigned int, sel->r.top, format->height - 2);
if (rwpf->entity.type == VSP1_ENTITY_WPF) {
sel->r.left = min_t(unsigned int, sel->r.left, 255);
sel->r.top = min_t(unsigned int, sel->r.top, 255);
}
static void wpf_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl)
{
struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev);
struct vsp1_device *vsp1 = wpf->entity.vsp1;
const struct v4l2_mbus_framefmt *source_format;
const struct v4l2_mbus_framefmt *sink_format;
const struct v4l2_rect *crop;
unsigned int i;
u32 outfmt = 0;
u32 srcrpf = 0;
/* Cropping */
crop = vsp1_rwpf_get_crop(wpf, wpf->entity.config);
vsp1_wpf_write(wpf, dl, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN |
(crop->left << VI6_WPF_SZCLIP_OFST_SHIFT) |
(crop->width << VI6_WPF_SZCLIP_SIZE_SHIFT));
vsp1_wpf_write(wpf, dl, VI6_WPF_VSZCLIP, VI6_WPF_SZCLIP_EN |
(crop->top << VI6_WPF_SZCLIP_OFST_SHIFT) |
(crop->height << VI6_WPF_SZCLIP_SIZE_SHIFT));
/* Format */
sink_format = vsp1_entity_get_pad_format(&wpf->entity,
wpf->entity.config,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&wpf->entity,
wpf->entity.config,
RWPF_PAD_SOURCE);
if (!pipe->lif) {
const struct v4l2_pix_format_mplane *format = &wpf->format;
const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT;
if (fmtinfo->alpha)
outfmt |= VI6_WPF_OUTFMT_PXA;
if (fmtinfo->swap_yc)
outfmt |= VI6_WPF_OUTFMT_SPYCS;
if (fmtinfo->swap_uv)
outfmt |= VI6_WPF_OUTFMT_SPUVS;
/* Destination stride and byte swapping. */
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_STRIDE_Y,
format->plane_fmt[0].bytesperline);
if (format->num_planes > 1)
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_STRIDE_C,
format->plane_fmt[1].bytesperline);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSWAP, fmtinfo->swap);
}
if (sink_format->code != source_format->code)
outfmt |= VI6_WPF_OUTFMT_CSC;
outfmt |= wpf->alpha << VI6_WPF_OUTFMT_PDV_SHIFT;
vsp1_wpf_write(wpf, dl, VI6_WPF_OUTFMT, outfmt);
vsp1_dl_list_write(dl, VI6_DPR_WPF_FPORCH(wpf->entity.index),
VI6_DPR_WPF_FPORCH_FP_WPFN);
vsp1_dl_list_write(dl, VI6_WPF_WRBCK_CTRL, 0);
/* Sources. If the pipeline has a single input and BRU is not used,
* configure it as the master layer. Otherwise configure all
* inputs as sub-layers and select the virtual RPF as the master
* layer.
*/
for (i = 0; i < vsp1->info->rpf_count; ++i) {
struct vsp1_rwpf *input = pipe->inputs[i];
if (!input)
continue;
srcrpf |= (!pipe->bru && pipe->num_inputs == 1)
? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index)
: VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index);
}
if (pipe->bru || pipe->num_inputs > 1)
srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST;
vsp1_wpf_write(wpf, dl, VI6_WPF_SRCRPF, srcrpf);
/* Enable interrupts */
vsp1_dl_list_write(dl, VI6_WPF_IRQ_STA(wpf->entity.index), 0);
vsp1_dl_list_write(dl, VI6_WPF_IRQ_ENB(wpf->entity.index),
VI6_WFP_IRQ_ENB_FREE);
}
static int rpf_s_stream(struct v4l2_subdev *subdev, int enable)
{
struct vsp1_pipeline *pipe = to_vsp1_pipeline(&subdev->entity);
struct vsp1_rwpf *rpf = to_rwpf(subdev);
struct vsp1_device *vsp1 = rpf->entity.vsp1;
const struct vsp1_format_info *fmtinfo = rpf->fmtinfo;
const struct v4l2_pix_format_mplane *format = &rpf->format;
const struct v4l2_rect *crop = &rpf->crop;
u32 pstride;
u32 infmt;
int ret;
ret = vsp1_entity_set_streaming(&rpf->entity, enable);
if (ret < 0)
return ret;
if (!enable)
return 0;
/* Source size, stride and crop offsets.
*
* The crop offsets correspond to the location of the crop rectangle top
* left corner in the plane buffer. Only two offsets are needed, as
* planes 2 and 3 always have identical strides.
*/
vsp1_rpf_write(rpf, VI6_RPF_SRC_BSIZE,
(crop->width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
(crop->height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
vsp1_rpf_write(rpf, VI6_RPF_SRC_ESIZE,
(crop->width << VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT) |
(crop->height << VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT));
rpf->offsets[0] = crop->top * format->plane_fmt[0].bytesperline
+ crop->left * fmtinfo->bpp[0] / 8;
pstride = format->plane_fmt[0].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_Y_SHIFT;
vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_Y,
rpf->buf_addr[0] + rpf->offsets[0]);
if (format->num_planes > 1) {
rpf->offsets[1] = crop->top * format->plane_fmt[1].bytesperline
+ crop->left * fmtinfo->bpp[1] / 8;
pstride |= format->plane_fmt[1].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C0,
rpf->buf_addr[1] + rpf->offsets[1]);
if (format->num_planes > 2)
vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C1,
rpf->buf_addr[2] + rpf->offsets[1]);
}
vsp1_rpf_write(rpf, VI6_RPF_SRCM_PSTRIDE, pstride);
/* Format */
infmt = VI6_RPF_INFMT_CIPM
| (fmtinfo->hwfmt << VI6_RPF_INFMT_RDFMT_SHIFT);
if (fmtinfo->swap_yc)
infmt |= VI6_RPF_INFMT_SPYCS;
if (fmtinfo->swap_uv)
infmt |= VI6_RPF_INFMT_SPUVS;
if (rpf->entity.formats[RWPF_PAD_SINK].code !=
rpf->entity.formats[RWPF_PAD_SOURCE].code)
infmt |= VI6_RPF_INFMT_CSC;
vsp1_rpf_write(rpf, VI6_RPF_INFMT, infmt);
vsp1_rpf_write(rpf, VI6_RPF_DSWAP, fmtinfo->swap);
/* Output location */
vsp1_rpf_write(rpf, VI6_RPF_LOC,
(rpf->location.left << VI6_RPF_LOC_HCOORD_SHIFT) |
(rpf->location.top << VI6_RPF_LOC_VCOORD_SHIFT));
/* Use the alpha channel (extended to 8 bits) when available or an
* alpha value set through the V4L2_CID_ALPHA_COMPONENT control
* otherwise. Disable color keying.
*/
vsp1_rpf_write(rpf, VI6_RPF_ALPH_SEL, VI6_RPF_ALPH_SEL_AEXT_EXT |
(fmtinfo->alpha ? VI6_RPF_ALPH_SEL_ASEL_PACKED
: VI6_RPF_ALPH_SEL_ASEL_FIXED));
if (vsp1->info->uapi)
mutex_lock(rpf->ctrls.lock);
vsp1_rpf_write(rpf, VI6_RPF_VRTCOL_SET,
rpf->alpha->cur.val << VI6_RPF_VRTCOL_SET_LAYA_SHIFT);
vsp1_pipeline_propagate_alpha(pipe, &rpf->entity, rpf->alpha->cur.val);
if (vsp1->info->uapi)
mutex_unlock(rpf->ctrls.lock);
vsp1_rpf_write(rpf, VI6_RPF_MSK_CTRL, 0);
vsp1_rpf_write(rpf, VI6_RPF_CKEY_CTRL, 0);
return 0;
}
static int wpf_s_stream(struct v4l2_subdev *subdev, int enable)
{
struct vsp1_pipeline *pipe = to_vsp1_pipeline(&subdev->entity);
struct vsp1_rwpf *wpf = to_rwpf(subdev);
struct vsp1_device *vsp1 = wpf->entity.vsp1;
const struct v4l2_rect *crop = &wpf->crop;
unsigned int i;
u32 srcrpf = 0;
u32 outfmt = 0;
int ret;
ret = vsp1_entity_set_streaming(&wpf->entity, enable);
if (ret < 0)
return ret;
if (!enable) {
vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), 0);
vsp1_wpf_write(wpf, VI6_WPF_SRCRPF, 0);
return 0;
}
/* Sources. If the pipeline has a single input and BRU is not used,
* configure it as the master layer. Otherwise configure all
* inputs as sub-layers and select the virtual RPF as the master
* layer.
*/
for (i = 0; i < pipe->num_inputs; ++i) {
struct vsp1_rwpf *input = pipe->inputs[i];
srcrpf |= (!pipe->bru && pipe->num_inputs == 1)
? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index)
: VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index);
}
if (pipe->bru || pipe->num_inputs > 1)
srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST;
vsp1_wpf_write(wpf, VI6_WPF_SRCRPF, srcrpf);
/* Destination stride. */
if (!pipe->lif) {
struct v4l2_pix_format_mplane *format = &wpf->video.format;
vsp1_wpf_write(wpf, VI6_WPF_DSTM_STRIDE_Y,
format->plane_fmt[0].bytesperline);
if (format->num_planes > 1)
vsp1_wpf_write(wpf, VI6_WPF_DSTM_STRIDE_C,
format->plane_fmt[1].bytesperline);
}
vsp1_wpf_write(wpf, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN |
(crop->left << VI6_WPF_SZCLIP_OFST_SHIFT) |
(crop->width << VI6_WPF_SZCLIP_SIZE_SHIFT));
vsp1_wpf_write(wpf, VI6_WPF_VSZCLIP, VI6_WPF_SZCLIP_EN |
(crop->top << VI6_WPF_SZCLIP_OFST_SHIFT) |
(crop->height << VI6_WPF_SZCLIP_SIZE_SHIFT));
/* Format */
if (!pipe->lif) {
const struct vsp1_format_info *fmtinfo = wpf->video.fmtinfo;
outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT;
if (fmtinfo->alpha)
outfmt |= VI6_WPF_OUTFMT_PXA;
if (fmtinfo->swap_yc)
outfmt |= VI6_WPF_OUTFMT_SPYCS;
if (fmtinfo->swap_uv)
outfmt |= VI6_WPF_OUTFMT_SPUVS;
vsp1_wpf_write(wpf, VI6_WPF_DSWAP, fmtinfo->swap);
}
if (wpf->entity.formats[RWPF_PAD_SINK].code !=
wpf->entity.formats[RWPF_PAD_SOURCE].code)
outfmt |= VI6_WPF_OUTFMT_CSC;
/* Take the control handler lock to ensure that the PDV value won't be
* changed behind our back by a set control operation.
*/
mutex_lock(wpf->ctrls.lock);
outfmt |= vsp1_wpf_read(wpf, VI6_WPF_OUTFMT) & VI6_WPF_OUTFMT_PDV_MASK;
vsp1_wpf_write(wpf, VI6_WPF_OUTFMT, outfmt);
mutex_unlock(wpf->ctrls.lock);
vsp1_write(vsp1, VI6_DPR_WPF_FPORCH(wpf->entity.index),
VI6_DPR_WPF_FPORCH_FP_WPFN);
vsp1_write(vsp1, VI6_WPF_WRBCK_CTRL, 0);
/* Enable interrupts */
vsp1_write(vsp1, VI6_WPF_IRQ_STA(wpf->entity.index), 0);
vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index),
VI6_WFP_IRQ_ENB_FREE);
return 0;
}
static int wpf_s_stream(struct v4l2_subdev *subdev, int enable)
{
struct vsp1_rwpf *wpf = to_rwpf(subdev);
struct vsp1_pipeline *pipe =
to_vsp1_pipeline(&wpf->entity.subdev.entity);
struct vsp1_device *vsp1 = wpf->entity.vsp1;
const struct v4l2_rect *crop = &wpf->crop;
unsigned int i;
u32 srcrpf = 0;
u32 outfmt = 0;
if (!enable) {
vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), 0);
return 0;
}
/* Sources. If the pipeline has a single input configure it as the
* master layer. Otherwise configure all inputs as sub-layers and
* select the virtual RPF as the master layer.
*/
for (i = 0; i < pipe->num_inputs; ++i) {
struct vsp1_rwpf *input = pipe->inputs[i];
srcrpf |= pipe->num_inputs == 1
? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index)
: VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index);
}
if (pipe->num_inputs > 1)
srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST;
vsp1_wpf_write(wpf, VI6_WPF_SRCRPF, srcrpf);
/* Destination stride. */
if (!pipe->lif) {
struct v4l2_pix_format_mplane *format = &wpf->video.format;
vsp1_wpf_write(wpf, VI6_WPF_DSTM_STRIDE_Y,
format->plane_fmt[0].bytesperline);
if (format->num_planes > 1)
vsp1_wpf_write(wpf, VI6_WPF_DSTM_STRIDE_C,
format->plane_fmt[1].bytesperline);
}
vsp1_wpf_write(wpf, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN |
(crop->left << VI6_WPF_SZCLIP_OFST_SHIFT) |
(crop->width << VI6_WPF_SZCLIP_SIZE_SHIFT));
vsp1_wpf_write(wpf, VI6_WPF_VSZCLIP, VI6_WPF_SZCLIP_EN |
(crop->top << VI6_WPF_SZCLIP_OFST_SHIFT) |
(crop->height << VI6_WPF_SZCLIP_SIZE_SHIFT));
/* Format */
if (!pipe->lif) {
const struct vsp1_format_info *fmtinfo = wpf->video.fmtinfo;
outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT;
if (fmtinfo->swap_yc)
outfmt |= VI6_WPF_OUTFMT_SPYCS;
if (fmtinfo->swap_uv)
outfmt |= VI6_WPF_OUTFMT_SPUVS;
vsp1_wpf_write(wpf, VI6_WPF_DSWAP, fmtinfo->swap);
}
if (wpf->entity.formats[RWPF_PAD_SINK].code !=
wpf->entity.formats[RWPF_PAD_SOURCE].code)
outfmt |= VI6_WPF_OUTFMT_CSC;
vsp1_wpf_write(wpf, VI6_WPF_OUTFMT, outfmt);
vsp1_write(vsp1, VI6_DPR_WPF_FPORCH(wpf->entity.index),
VI6_DPR_WPF_FPORCH_FP_WPFN);
vsp1_write(vsp1, VI6_WPF_WRBCK_CTRL, 0);
/* Enable interrupts */
vsp1_write(vsp1, VI6_WPF_IRQ_STA(wpf->entity.index), 0);
vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index),
VI6_WFP_IRQ_ENB_FREE);
return 0;
}
static int wpf_s_stream(struct v4l2_subdev *subdev, int enable)
{
struct vsp1_rwpf *wpf = to_rwpf(subdev);
struct vsp1_pipeline *pipe =
to_vsp1_pipeline(&wpf->entity.subdev.entity);
struct vsp1_device *vsp1 = wpf->entity.vsp1;
const struct v4l2_mbus_framefmt *format =
&wpf->entity.formats[RWPF_PAD_SOURCE];
unsigned int i;
u32 srcrpf = 0;
u32 outfmt = 0;
if (!enable) {
vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), 0);
return 0;
}
/* Sources */
for (i = 0; i < pipe->num_inputs; ++i) {
struct vsp1_rwpf *input = pipe->inputs[i];
srcrpf |= VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index);
}
vsp1_wpf_write(wpf, VI6_WPF_SRCRPF, srcrpf);
/* Destination stride. Cropping isn't supported yet. */
if (!pipe->lif) {
struct v4l2_pix_format_mplane *format = &wpf->video.format;
vsp1_wpf_write(wpf, VI6_WPF_DSTM_STRIDE_Y,
format->plane_fmt[0].bytesperline);
if (format->num_planes > 1)
vsp1_wpf_write(wpf, VI6_WPF_DSTM_STRIDE_C,
format->plane_fmt[1].bytesperline);
}
vsp1_wpf_write(wpf, VI6_WPF_HSZCLIP,
format->width << VI6_WPF_SZCLIP_SIZE_SHIFT);
vsp1_wpf_write(wpf, VI6_WPF_VSZCLIP,
format->height << VI6_WPF_SZCLIP_SIZE_SHIFT);
/* Format */
if (!pipe->lif) {
const struct vsp1_format_info *fmtinfo = wpf->video.fmtinfo;
outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT;
if (fmtinfo->swap_yc)
outfmt |= VI6_WPF_OUTFMT_SPYCS;
if (fmtinfo->swap_uv)
outfmt |= VI6_WPF_OUTFMT_SPUVS;
vsp1_wpf_write(wpf, VI6_WPF_DSWAP, fmtinfo->swap);
}
if (wpf->entity.formats[RWPF_PAD_SINK].code !=
wpf->entity.formats[RWPF_PAD_SOURCE].code)
outfmt |= VI6_WPF_OUTFMT_CSC;
vsp1_wpf_write(wpf, VI6_WPF_OUTFMT, outfmt);
vsp1_write(vsp1, VI6_DPR_WPF_FPORCH(wpf->entity.index),
VI6_DPR_WPF_FPORCH_FP_WPFN);
vsp1_write(vsp1, VI6_WPF_WRBCK_CTRL, 0);
/* Enable interrupts */
vsp1_write(vsp1, VI6_WPF_IRQ_STA(wpf->entity.index), 0);
vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index),
VI6_WFP_IRQ_ENB_FREE);
return 0;
}
static void rpf_configure_stream(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_body *dlb)
{
struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev);
const struct vsp1_format_info *fmtinfo = rpf->fmtinfo;
const struct v4l2_pix_format_mplane *format = &rpf->format;
const struct v4l2_mbus_framefmt *source_format;
const struct v4l2_mbus_framefmt *sink_format;
unsigned int left = 0;
unsigned int top = 0;
u32 pstride;
u32 infmt;
/* Stride */
pstride = format->plane_fmt[0].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_Y_SHIFT;
if (format->num_planes > 1)
pstride |= format->plane_fmt[1].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
/*
* pstride has both STRIDE_Y and STRIDE_C, but multiplying the whole
* of pstride by 2 is conveniently OK here as we are multiplying both
* values.
*/
if (pipe->interlaced)
pstride *= 2;
vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_PSTRIDE, pstride);
/* Format */
sink_format = vsp1_entity_get_pad_format(&rpf->entity,
rpf->entity.config,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&rpf->entity,
rpf->entity.config,
RWPF_PAD_SOURCE);
infmt = VI6_RPF_INFMT_CIPM
| (fmtinfo->hwfmt << VI6_RPF_INFMT_RDFMT_SHIFT);
if (fmtinfo->swap_yc)
infmt |= VI6_RPF_INFMT_SPYCS;
if (fmtinfo->swap_uv)
infmt |= VI6_RPF_INFMT_SPUVS;
if (sink_format->code != source_format->code)
infmt |= VI6_RPF_INFMT_CSC;
vsp1_rpf_write(rpf, dlb, VI6_RPF_INFMT, infmt);
vsp1_rpf_write(rpf, dlb, VI6_RPF_DSWAP, fmtinfo->swap);
/* Output location. */
if (pipe->brx) {
const struct v4l2_rect *compose;
compose = vsp1_entity_get_pad_selection(pipe->brx,
pipe->brx->config,
rpf->brx_input,
V4L2_SEL_TGT_COMPOSE);
left = compose->left;
top = compose->top;
}
if (pipe->interlaced)
top /= 2;
vsp1_rpf_write(rpf, dlb, VI6_RPF_LOC,
(left << VI6_RPF_LOC_HCOORD_SHIFT) |
(top << VI6_RPF_LOC_VCOORD_SHIFT));
/*
* On Gen2 use the alpha channel (extended to 8 bits) when available or
* a fixed alpha value set through the V4L2_CID_ALPHA_COMPONENT control
* otherwise.
*
* The Gen3 RPF has extended alpha capability and can both multiply the
* alpha channel by a fixed global alpha value, and multiply the pixel
* components to convert the input to premultiplied alpha.
*
* As alpha premultiplication is available in the BRx for both Gen2 and
* Gen3 we handle it there and use the Gen3 alpha multiplier for global
* alpha multiplication only. This however prevents conversion to
* premultiplied alpha if no BRx is present in the pipeline. If that use
* case turns out to be useful we will revisit the implementation (for
* Gen3 only).
*
* We enable alpha multiplication on Gen3 using the fixed alpha value
* set through the V4L2_CID_ALPHA_COMPONENT control when the input
* contains an alpha channel. On Gen2 the global alpha is ignored in
* that case.
*
* In all cases, disable color keying.
*/
vsp1_rpf_write(rpf, dlb, VI6_RPF_ALPH_SEL, VI6_RPF_ALPH_SEL_AEXT_EXT |
(fmtinfo->alpha ? VI6_RPF_ALPH_SEL_ASEL_PACKED
: VI6_RPF_ALPH_SEL_ASEL_FIXED));
if (entity->vsp1->info->gen == 3) {
u32 mult;
if (fmtinfo->alpha) {
/*
* When the input contains an alpha channel enable the
* alpha multiplier. If the input is premultiplied we
* need to multiply both the alpha channel and the pixel
* components by the global alpha value to keep them
* premultiplied. Otherwise multiply the alpha channel
* only.
*/
bool premultiplied = format->flags
& V4L2_PIX_FMT_FLAG_PREMUL_ALPHA;
mult = VI6_RPF_MULT_ALPHA_A_MMD_RATIO
| (premultiplied ?
VI6_RPF_MULT_ALPHA_P_MMD_RATIO :
VI6_RPF_MULT_ALPHA_P_MMD_NONE);
} else {
/*
* When the input doesn't contain an alpha channel the
* global alpha value is applied in the unpacking unit,
* the alpha multiplier isn't needed and must be
* disabled.
*/
mult = VI6_RPF_MULT_ALPHA_A_MMD_NONE
| VI6_RPF_MULT_ALPHA_P_MMD_NONE;
}
rpf->mult_alpha = mult;
}
vsp1_rpf_write(rpf, dlb, VI6_RPF_MSK_CTRL, 0);
vsp1_rpf_write(rpf, dlb, VI6_RPF_CKEY_CTRL, 0);
}
static void rpf_configure_partition(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl,
struct vsp1_dl_body *dlb)
{
struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev);
struct vsp1_rwpf_memory mem = rpf->mem;
struct vsp1_device *vsp1 = rpf->entity.vsp1;
const struct vsp1_format_info *fmtinfo = rpf->fmtinfo;
const struct v4l2_pix_format_mplane *format = &rpf->format;
struct v4l2_rect crop;
/*
* Source size and crop offsets.
*
* The crop offsets correspond to the location of the crop
* rectangle top left corner in the plane buffer. Only two
* offsets are needed, as planes 2 and 3 always have identical
* strides.
*/
crop = *vsp1_rwpf_get_crop(rpf, rpf->entity.config);
/*
* Partition Algorithm Control
*
* The partition algorithm can split this frame into multiple
* slices. We must scale our partition window based on the pipe
* configuration to match the destination partition window.
* To achieve this, we adjust our crop to provide a 'sub-crop'
* matching the expected partition window. Only 'left' and
* 'width' need to be adjusted.
*/
if (pipe->partitions > 1) {
crop.width = pipe->partition->rpf.width;
crop.left += pipe->partition->rpf.left;
}
if (pipe->interlaced) {
crop.height = round_down(crop.height / 2, fmtinfo->vsub);
crop.top = round_down(crop.top / 2, fmtinfo->vsub);
}
vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_BSIZE,
(crop.width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
(crop.height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_ESIZE,
(crop.width << VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT) |
(crop.height << VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT));
mem.addr[0] += crop.top * format->plane_fmt[0].bytesperline
+ crop.left * fmtinfo->bpp[0] / 8;
if (format->num_planes > 1) {
unsigned int offset;
offset = crop.top * format->plane_fmt[1].bytesperline
+ crop.left / fmtinfo->hsub
* fmtinfo->bpp[1] / 8;
mem.addr[1] += offset;
mem.addr[2] += offset;
}
/*
* On Gen3 hardware the SPUVS bit has no effect on 3-planar
* formats. Swap the U and V planes manually in that case.
*/
if (vsp1->info->gen == 3 && format->num_planes == 3 &&
fmtinfo->swap_uv)
swap(mem.addr[1], mem.addr[2]);
/*
* Interlaced pipelines will use the extended pre-cmd to process
* SRCM_ADDR_{Y,C0,C1}.
*/
if (pipe->interlaced) {
vsp1_rpf_configure_autofld(rpf, dl);
} else {
vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
}
}
static int rpf_s_stream(struct v4l2_subdev *subdev, int enable)
{
struct vsp1_rwpf *rpf = to_rwpf(subdev);
const struct vsp1_format_info *fmtinfo = rpf->video.fmtinfo;
const struct v4l2_pix_format_mplane *format = &rpf->video.format;
const struct v4l2_rect *crop = &rpf->crop;
u32 pstride;
u32 infmt;
if (!enable)
return 0;
/* Source size, stride and crop offsets.
*
* The crop offsets correspond to the location of the crop rectangle top
* left corner in the plane buffer. Only two offsets are needed, as
* planes 2 and 3 always have identical strides.
*/
vsp1_rpf_write(rpf, VI6_RPF_SRC_BSIZE,
(crop->width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
(crop->height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
vsp1_rpf_write(rpf, VI6_RPF_SRC_ESIZE,
(crop->width << VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT) |
(crop->height << VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT));
rpf->offsets[0] = crop->top * format->plane_fmt[0].bytesperline
+ crop->left * fmtinfo->bpp[0] / 8;
pstride = format->plane_fmt[0].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_Y_SHIFT;
if (format->num_planes > 1) {
rpf->offsets[1] = crop->top * format->plane_fmt[1].bytesperline
+ crop->left * fmtinfo->bpp[1] / 8;
pstride |= format->plane_fmt[1].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
}
vsp1_rpf_write(rpf, VI6_RPF_SRCM_PSTRIDE, pstride);
/* Format */
infmt = VI6_RPF_INFMT_CIPM
| (fmtinfo->hwfmt << VI6_RPF_INFMT_RDFMT_SHIFT);
if (fmtinfo->swap_yc)
infmt |= VI6_RPF_INFMT_SPYCS;
if (fmtinfo->swap_uv)
infmt |= VI6_RPF_INFMT_SPUVS;
if (rpf->entity.formats[RWPF_PAD_SINK].code !=
rpf->entity.formats[RWPF_PAD_SOURCE].code)
infmt |= VI6_RPF_INFMT_CSC;
vsp1_rpf_write(rpf, VI6_RPF_INFMT, infmt);
vsp1_rpf_write(rpf, VI6_RPF_DSWAP, fmtinfo->swap);
/* Output location */
vsp1_rpf_write(rpf, VI6_RPF_LOC,
(rpf->location.left << VI6_RPF_LOC_HCOORD_SHIFT) |
(rpf->location.top << VI6_RPF_LOC_VCOORD_SHIFT));
/* Disable alpha, mask and color key. Set the alpha channel to a fixed
* value of 255.
*/
vsp1_rpf_write(rpf, VI6_RPF_ALPH_SEL, VI6_RPF_ALPH_SEL_ASEL_FIXED);
vsp1_rpf_write(rpf, VI6_RPF_VRTCOL_SET,
255 << VI6_RPF_VRTCOL_SET_LAYA_SHIFT);
vsp1_rpf_write(rpf, VI6_RPF_MSK_CTRL, 0);
vsp1_rpf_write(rpf, VI6_RPF_CKEY_CTRL, 0);
return 0;
}
static void wpf_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev);
struct vsp1_device *vsp1 = wpf->entity.vsp1;
const struct v4l2_mbus_framefmt *source_format;
const struct v4l2_mbus_framefmt *sink_format;
unsigned int i;
u32 outfmt = 0;
u32 srcrpf = 0;
if (params == VSP1_ENTITY_PARAMS_RUNTIME) {
const unsigned int mask = BIT(WPF_CTRL_VFLIP)
| BIT(WPF_CTRL_HFLIP);
unsigned long flags;
spin_lock_irqsave(&wpf->flip.lock, flags);
wpf->flip.active = (wpf->flip.active & ~mask)
| (wpf->flip.pending & mask);
spin_unlock_irqrestore(&wpf->flip.lock, flags);
outfmt = (wpf->alpha << VI6_WPF_OUTFMT_PDV_SHIFT) | wpf->outfmt;
if (wpf->flip.active & BIT(WPF_CTRL_VFLIP))
outfmt |= VI6_WPF_OUTFMT_FLP;
if (wpf->flip.active & BIT(WPF_CTRL_HFLIP))
outfmt |= VI6_WPF_OUTFMT_HFLP;
vsp1_wpf_write(wpf, dl, VI6_WPF_OUTFMT, outfmt);
return;
}
sink_format = vsp1_entity_get_pad_format(&wpf->entity,
wpf->entity.config,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&wpf->entity,
wpf->entity.config,
RWPF_PAD_SOURCE);
if (params == VSP1_ENTITY_PARAMS_PARTITION) {
const struct v4l2_pix_format_mplane *format = &wpf->format;
struct vsp1_rwpf_memory mem = wpf->mem;
unsigned int flip = wpf->flip.active;
unsigned int width = source_format->width;
unsigned int height = source_format->height;
unsigned int offset;
/*
* Cropping. The partition algorithm can split the image into
* multiple slices.
*/
if (pipe->partitions > 1)
width = pipe->partition.width;
vsp1_wpf_write(wpf, dl, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN |
(0 << VI6_WPF_SZCLIP_OFST_SHIFT) |
(width << VI6_WPF_SZCLIP_SIZE_SHIFT));
vsp1_wpf_write(wpf, dl, VI6_WPF_VSZCLIP, VI6_WPF_SZCLIP_EN |
(0 << VI6_WPF_SZCLIP_OFST_SHIFT) |
(height << VI6_WPF_SZCLIP_SIZE_SHIFT));
if (pipe->lif)
return;
/*
* Update the memory offsets based on flipping configuration.
* The destination addresses point to the locations where the
* VSP starts writing to memory, which can be different corners
* of the image depending on vertical flipping.
*/
if (pipe->partitions > 1) {
const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
/*
* Horizontal flipping is handled through a line buffer
* and doesn't modify the start address, but still needs
* to be handled when image partitioning is in effect to
* order the partitions correctly.
*/
if (flip & BIT(WPF_CTRL_HFLIP))
offset = format->width - pipe->partition.left
- pipe->partition.width;
else
offset = pipe->partition.left;
mem.addr[0] += offset * fmtinfo->bpp[0] / 8;
if (format->num_planes > 1) {
mem.addr[1] += offset / fmtinfo->hsub
* fmtinfo->bpp[1] / 8;
mem.addr[2] += offset / fmtinfo->hsub
* fmtinfo->bpp[2] / 8;
}
}
if (flip & BIT(WPF_CTRL_VFLIP)) {
mem.addr[0] += (format->height - 1)
* format->plane_fmt[0].bytesperline;
if (format->num_planes > 1) {
offset = (format->height / wpf->fmtinfo->vsub - 1)
* format->plane_fmt[1].bytesperline;
mem.addr[1] += offset;
mem.addr[2] += offset;
}
}
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_Y, mem.addr[0]);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C0, mem.addr[1]);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C1, mem.addr[2]);
return;
}
/* Format */
if (!pipe->lif) {
const struct v4l2_pix_format_mplane *format = &wpf->format;
const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT;
if (fmtinfo->alpha)
outfmt |= VI6_WPF_OUTFMT_PXA;
if (fmtinfo->swap_yc)
outfmt |= VI6_WPF_OUTFMT_SPYCS;
if (fmtinfo->swap_uv)
outfmt |= VI6_WPF_OUTFMT_SPUVS;
/* Destination stride and byte swapping. */
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_STRIDE_Y,
format->plane_fmt[0].bytesperline);
if (format->num_planes > 1)
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_STRIDE_C,
format->plane_fmt[1].bytesperline);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSWAP, fmtinfo->swap);
if (vsp1->info->features & VSP1_HAS_WPF_HFLIP &&
wpf->entity.index == 0)
vsp1_wpf_write(wpf, dl, VI6_WPF_ROT_CTRL,
VI6_WPF_ROT_CTRL_LN16 |
(256 << VI6_WPF_ROT_CTRL_LMEM_WD_SHIFT));
}
if (sink_format->code != source_format->code)
outfmt |= VI6_WPF_OUTFMT_CSC;
wpf->outfmt = outfmt;
vsp1_dl_list_write(dl, VI6_DPR_WPF_FPORCH(wpf->entity.index),
VI6_DPR_WPF_FPORCH_FP_WPFN);
vsp1_dl_list_write(dl, VI6_WPF_WRBCK_CTRL, 0);
/* Sources. If the pipeline has a single input and BRU is not used,
* configure it as the master layer. Otherwise configure all
* inputs as sub-layers and select the virtual RPF as the master
* layer.
*/
for (i = 0; i < vsp1->info->rpf_count; ++i) {
struct vsp1_rwpf *input = pipe->inputs[i];
if (!input)
continue;
srcrpf |= (!pipe->bru && pipe->num_inputs == 1)
? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index)
: VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index);
}
if (pipe->bru || pipe->num_inputs > 1)
srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST;
vsp1_wpf_write(wpf, dl, VI6_WPF_SRCRPF, srcrpf);
/* Enable interrupts */
vsp1_dl_list_write(dl, VI6_WPF_IRQ_STA(wpf->entity.index), 0);
vsp1_dl_list_write(dl, VI6_WPF_IRQ_ENB(wpf->entity.index),
VI6_WFP_IRQ_ENB_DFEE);
}