Esempi in C++ (Cpp) per track_paint_util_right_quarter_turn_5_tiles_paint

Esempio n. 1

File: monorail_cycles.c Progetto: LucaRed/OpenRCT2

/** rct2: 0x0088ADB8 */
static void paint_monorail_cycles_track_right_quarter_turn_5_tiles(uint8 rideIndex, uint8 trackSequence, uint8 direction, sint32 height, rct_map_element * mapElement)
{
	track_paint_util_right_quarter_turn_5_tiles_paint(1, height, direction, trackSequence, gTrackColours[SCHEME_TRACK], monorail_cycles_track_pieces_flat_quarter_turn_5_tiles, NULL, defaultRightQuarterTurn5TilesBoundLengths, defaultRightQuarterTurn5TilesBoundOffsets, get_current_rotation());

	sint32 supportHeight = height + monorail_cycles_track_right_quarter_turn_5_tiles_support_height_offset[direction][trackSequence];
	sint32 supportSpecial = monorail_cycles_track_right_quarter_turn_5_tiles_support_special[direction][trackSequence];
	switch (trackSequence) {
		case 0:
			metal_a_supports_paint_setup((direction & 1) ? METAL_SUPPORTS_STICK_ALT : METAL_SUPPORTS_STICK, 4, supportSpecial, supportHeight, gTrackColours[SCHEME_SUPPORTS]);
			break;
		case 2:
			if (direction == 0) metal_a_supports_paint_setup((direction & 1) ? METAL_SUPPORTS_STICK_ALT : METAL_SUPPORTS_STICK, 8, supportSpecial, supportHeight, gTrackColours[SCHEME_SUPPORTS]);
			if (direction == 1) metal_a_supports_paint_setup((direction & 1) ? METAL_SUPPORTS_STICK_ALT : METAL_SUPPORTS_STICK, 7, supportSpecial, supportHeight, gTrackColours[SCHEME_SUPPORTS]);
			if (direction == 2) metal_a_supports_paint_setup((direction & 1) ? METAL_SUPPORTS_STICK_ALT : METAL_SUPPORTS_STICK, 5, supportSpecial, supportHeight, gTrackColours[SCHEME_SUPPORTS]);
			if (direction == 3) metal_a_supports_paint_setup((direction & 1) ? METAL_SUPPORTS_STICK_ALT : METAL_SUPPORTS_STICK, 6, supportSpecial, supportHeight, gTrackColours[SCHEME_SUPPORTS]);
			break;
		case 5:
			if (direction == 0) metal_a_supports_paint_setup((direction & 1) ? METAL_SUPPORTS_STICK : METAL_SUPPORTS_STICK_ALT, 7, supportSpecial, supportHeight, gTrackColours[SCHEME_SUPPORTS]);
			if (direction == 1) metal_a_supports_paint_setup((direction & 1) ? METAL_SUPPORTS_STICK : METAL_SUPPORTS_STICK_ALT, 5, supportSpecial, supportHeight, gTrackColours[SCHEME_SUPPORTS]);
			if (direction == 2) metal_a_supports_paint_setup((direction & 1) ? METAL_SUPPORTS_STICK : METAL_SUPPORTS_STICK_ALT, 6, supportSpecial, supportHeight, gTrackColours[SCHEME_SUPPORTS]);
			if (direction == 3) metal_a_supports_paint_setup((direction & 1) ? METAL_SUPPORTS_STICK : METAL_SUPPORTS_STICK_ALT, 8, supportSpecial, supportHeight, gTrackColours[SCHEME_SUPPORTS]);
			break;
		case 6:
			metal_a_supports_paint_setup((direction & 1) ? METAL_SUPPORTS_STICK : METAL_SUPPORTS_STICK_ALT, 4, supportSpecial, supportHeight, gTrackColours[SCHEME_SUPPORTS]);
			break;
	}

	if (direction == 0 && trackSequence == 0) {
		paint_util_push_tunnel_left(height, TUNNEL_0);
	}

	if (direction == 0 && trackSequence == 6) {
		paint_util_push_tunnel_right(height, TUNNEL_0);
	}

	if (direction == 1 && trackSequence == 6) {
		paint_util_push_tunnel_left(height, TUNNEL_0);
	}

	if (direction == 3 && trackSequence == 0) {
		paint_util_push_tunnel_right(height, TUNNEL_0);
	}

	switch (trackSequence) {
		case 0: paint_util_set_segment_support_height(paint_util_rotate_segments(SEGMENT_D0 | SEGMENT_C4 | SEGMENT_CC | SEGMENT_BC, direction), 0xFFFF, 0); break;
		case 2: paint_util_set_segment_support_height(paint_util_rotate_segments(SEGMENT_D0 | SEGMENT_C4 | SEGMENT_D4 | SEGMENT_BC | SEGMENT_C0 | SEGMENT_CC, direction), 0xFFFF, 0); break;
		case 3: paint_util_set_segment_support_height(paint_util_rotate_segments(SEGMENT_B4 | SEGMENT_C8 | SEGMENT_CC | SEGMENT_C4, direction), 0xFFFF, 0); break;
		case 5: paint_util_set_segment_support_height(paint_util_rotate_segments(SEGMENT_D4 | SEGMENT_C4 | SEGMENT_D0 | SEGMENT_B8 | SEGMENT_C0 | SEGMENT_C8, direction), 0xFFFF, 0); break;
		case 6: paint_util_set_segment_support_height(paint_util_rotate_segments(SEGMENT_D4 | SEGMENT_C4 | SEGMENT_C8 | SEGMENT_B8, direction), 0xFFFF, 0); break;
	}

	paint_util_set_general_support_height(height + 32, 0x20);
}

Esempio n. 2

File: monorail.c Progetto: trigger-death/OpenRCT2

/** rct2: 0x008AE22C */
static void paint_monorail_track_right_quarter_turn_5_tiles(uint8 rideIndex, uint8 trackSequence, uint8 direction, sint32 height, rct_map_element * mapElement)
{
    track_paint_util_right_quarter_turn_5_tiles_paint(3, height, direction, trackSequence, gTrackColours[SCHEME_TRACK], monorail_track_pieces_flat_quarter_turn_5_tiles, defaultRightQuarterTurn5TilesOffsets, defaultRightQuarterTurn5TilesBoundLengths, NULL, get_current_rotation());

    switch (trackSequence) {
        case 0:
        case 6:
            metal_a_supports_paint_setup(METAL_SUPPORTS_BOXED, 4, 0, height, gTrackColours[SCHEME_SUPPORTS]);
            break;
    }

    if (direction == 0 && trackSequence == 0) {
        paint_util_push_tunnel_left(height, TUNNEL_6);
    }

    if (direction == 0 && trackSequence == 6) {
        paint_util_push_tunnel_right(height, TUNNEL_6);
    }

    if (direction == 1 && trackSequence == 6) {
        paint_util_push_tunnel_left(height, TUNNEL_6);
    }

    if (direction == 3 && trackSequence == 0) {
        paint_util_push_tunnel_right(height, TUNNEL_6);
    }

    sint32 blockedSegments = 0;
    switch (trackSequence) {
        case 0: blockedSegments = SEGMENT_D0 | SEGMENT_C4 | SEGMENT_CC | SEGMENT_BC; break;
        case 2: blockedSegments = SEGMENT_D0 | SEGMENT_C4 | SEGMENT_D4 | SEGMENT_BC | SEGMENT_C0 | SEGMENT_CC; break;
        case 3: blockedSegments = SEGMENT_B4 | SEGMENT_C8 | SEGMENT_CC | SEGMENT_C4; break;
        case 5: blockedSegments = SEGMENT_D4 | SEGMENT_C4 | SEGMENT_D0 | SEGMENT_B8 | SEGMENT_C0 | SEGMENT_C8; break;
        case 6: blockedSegments = SEGMENT_D4 | SEGMENT_C4 | SEGMENT_C8 | SEGMENT_B8; break;
    }

    paint_util_set_segment_support_height(paint_util_rotate_segments(blockedSegments, direction), 0xFFFF, 0);


    paint_util_set_general_support_height(height + 32, 0x20);
}