void RGBLed::next() {
mode++;
if (ANIMATE < mode) mode = OFF;
switch(mode) {
case RED:
red();
break;
case GREEN:
green();
break;
case BLUE:
blue();
break;
case YELLOW:
yellow();
break;
case PURPLE:
purple();
break;
case TURQUOISE:
turquoise();
break;
case OFF:
off();
break;
}
}
int main(int argc, char* argv[])
{
// Build your scene and setup your camera here, by calling
// functions from Raytracer. The code here sets up an example
// scene and renders it from two different view points, DO NOT
// change this if you're just implementing part one of the
// assignment.
Raytracer raytracer;
int width = 320;
int height = 240;
int aa = 2;
int sceneNum = 0;
double toRadian = 2*M_PI/360.0;
fprintf(stderr, "Using options:\n");
#ifdef USE_EXTENDEDLIGHTS
fprintf(stderr, "\tExtended light sources\n");
#else
fprintf(stderr, "\tPoint light sources\n");
#endif
#ifdef USE_REFRACTIONS
fprintf(stderr, "\tRefractions\n");
#else
fprintf(stderr, "\tNo refractions\n");
#endif
#ifdef USE_REFLECTIONS
fprintf(stderr, "\tReflections\n");
#else
fprintf(stderr, "\tNo reflections\n");
#endif
#ifdef IGNORE_SHADOWS
fprintf(stderr, "\tNo shadows\n");
#else
{
#ifdef USE_TRANSMISSIONSHADOWS
fprintf(stderr, "\tTransmission-based shadows\n");
#else
fprintf(stderr, "\tSimple shadows\n");
#endif
}
#endif
#ifdef USE_FINERFLUX
fprintf(stderr, "\tFiner numerical flux intergrations\n");
#else
fprintf(stderr, "\tCoarser numerical flux intergrations\n");
#endif
if (argc == 3) {
width = atoi(argv[1]);
height = atoi(argv[2]);
} else if (argc == 4) {
width = atoi(argv[1]);
height = atoi(argv[2]);
aa = atoi(argv[3]);
} else if (argc == 5) {
width = atoi(argv[1]);
height = atoi(argv[2]);
aa = atoi(argv[3]);
sceneNum = atoi(argv[4]);
}
// SceneNum should not exceed total scenes
if ((sceneNum > 3)|| (sceneNum <0)) {
sceneNum = 0;
}
// Camera parameters.
Point3D eye(0, 0, 1);
Vector3D view(0, 0, -1);
Vector3D up(0, 1, 0);
double fov = 60;
// Defines materials for shading.
Material gold( Colour(0.3, 0.3, 0.3), Colour(0.75164, 0.60648, 0.22648),
Colour(0.628281, 0.555802, 0.366065),
51.2, 0.001, 0.0, 1/2.4 );
Material jade( Colour(0.22, 0.38, 0.33), Colour(0.52, 0.73, 0.57),
Colour(0.316228, 0.316228, 0.316228),
12.8, 0.2 , 0.0, 0.0 );
Material polishedGold( Colour(0.24725, 0.2245, 0.0645), Colour(0.34615, 0.3143, 0.0903),
Colour(0.797357, 0.723991, 0.208006), 83.2, 0.01,0.0,0.0);
Material glass( Colour(0.15, 0.15, 0.15), Colour(0.08, 0.08, 0.08),
Colour(0.2, 0.2, 0.2), 50.1,0.08,0.9,0.6667 );
Material glass1( Colour(0.2, 0.2, 0.2), Colour(0.2, 0.2, 0.2),
Colour(0.7, 0.7, 0.7), 10.1,0.03,0.9,0.6667 );
Material steel( Colour(0.1, 0.1, 0.1), Colour(0.1, 0.1, 0.1),
Colour(0.8, 0.8, 0.8), 80, 0.03, 0.0, 1.0 );
Material blueSolid( Colour(0, 0, 1), Colour(0, 0, 1),
Colour(0, 0, 0), 0, 0.0, 0.0, 1.0 );
Material redSolid( Colour(1, 0, 0), Colour(1, 0, 0),
Colour(0, 0, 0), 0, 0.0, 0.0, 1.0 );
Material chrome( Colour(0.25, 0.25, 0.25), Colour(0.4,0.4,0.4),
Colour(0.7746, 0.7746, 0.7746), 77, 0.42, 0.0, 1.0);
Material ruby( Colour(0.1745, 0.01175, 0.01175), Colour(0.61424, 0.04136, 0.04136),
Colour(0.727811, 0.626959, 0.626959) , 76.8, 0.01, 0.0, 0.565);
Material pearl( Colour(0.25, 0.20725, 0.20725), Colour(1, 0.829, 0.829),
Colour(0.296648, 0.296648, 0.296648), 11.264, 0.1,0.0,1.0 );
Material silver(Colour(0.23125, 0.23125, 0.23125), Colour(0.2775, 0.2775, 0.2775),
Colour(0.773911, 0.773911, 0.773911), 89.6, 0.4,0.0, 1.0);
Material emerald(Colour(0.0215, 0.1745, 0.0215),Colour(0.07568, 0.61424, 0.07568),
Colour(0.633, 0.727811, 0.633), 76.8, 0.1, 0.25, 0.637);
Material brass(Colour(0.329412, 0.223529, 0.027451),Colour(0.780392, 0.568627, 0.113725),
Colour(0.992157, 0.941176, 0.807843),27.8974, 0.3, 0.0, 1.0 );
Material bronze(Colour(0.2125, 0.1275, 0.054), Colour(0.714, 0.4284, 0.18144),
Colour(0.393548, 0.271906, 0.166721), 25.6, 0.1, 0.0, 1.0 );
Material bronzeShiny(Colour(0.25, 0.148, 0.06475), Colour(0.4, 0.2368, 0.1036),
Colour(0.774597, 0.458561, 0.200621), 76.86, 0.15, 0.0, 1.0 );
Material turquoise(Colour(0.1, 0.18725, 0.1745), Colour(0.396, 0.74151, 0.69102),
Colour(0.297254, 0.30829, 0.306678), 12.8, 0.01, 0.2, 0.9);
Material obsidian(Colour(0.05375, 0.05, 0.06625), Colour(0.18275, 0.17, 0.22525),
Colour(0.332741, 0.328634, 0.346435), 38.4, 0.05, 0.18, 0.413);
Material copper(Colour(0.19125, 0.0735, 0.0225), Colour(0.7038, 0.27048, 0.0828),
Colour(0.256777, 0.137622, 0.086014), 12.8, 0.1, 0.0, 1.0 );
Material copperPolished(Colour(0.2295, 0.08825, 0.0275), Colour(0.5508, 0.2118, 0.066),
Colour(0.580594, 0.223257, 0.0695701), 51.2, 0.15, 0.0, 1.0 );
Material pewter(Colour(0.105882, 0.058824, 0.113725), Colour(0.427451, 0.470588, 0.541176),
Colour(0.333333, 0.333333, 0.521569), 9.84615, 0.0, 0.0, 1.0 );
// Light Sources
//=====================
//raytracer.addLightSource( new PointLight(Point3D(1, 1, 2),Colour(0.5, 0.5, 0.5)) );
#ifdef USE_EXTENDEDLIGHTS
// Defines a ball light source
raytracer.addLightSource( new BallLight(Point3D(-1, 1, 1),
2.0, Colour(0.9, 0.9, 0.9), 4) );
#else
// Defines a point light source.
raytracer.addLightSource( new PointLight(Point3D(0, 0, 5),
Colour(0.9, 0.9,0.9) ) );
#endif
if (sceneNum==0) {
// Defines a point light source.
//raytracer.addLightSource( new PointLight(Point3D(0, 0, 5),
// Colour(0.9, 0.9, 0.9) ) );
// Add a unit square into the scene with material mat.
SceneDagNode* sphere = raytracer.addObject( new UnitSphere(), &gold);
SceneDagNode* plane = raytracer.addObject( new UnitSquare(), &jade );
// Apply some transformations to the unit square.
double factor1[3] = { 1.0, 2.0, 1.0 };
double factor2[3] = { 6.0, 6.0, 1.0 };
double factor3[3] = { 4.0, 4.0, 4.0 };
double factor4[3] = { 3.7, 3.7, 3.7 };
raytracer.translate(sphere, Vector3D(0, 0, -5));
raytracer.rotate(sphere, 'x', -45);
raytracer.rotate(sphere, 'z', 45);
raytracer.scale(sphere, Point3D(0, 0, 0), factor1);
raytracer.translate(plane, Vector3D(0, 0, -7));
raytracer.rotate(plane, 'z', 45);
raytracer.scale(plane, Point3D(0, 0, 0), factor2);
/*
SceneDagNode* bigSphere = raytracer.addObject( new UnitSphere(), &glass1);
raytracer.scale(bigSphere, Point3D(0, 0, 0), factor3);
raytracer.translate(bigSphere, Vector3D(0, 0, -7));
SceneDagNode* bigSphere2 = raytracer.addObject( new UnitSphere(), &glass1);
raytracer.scale(bigSphere2, Point3D(0, 0, 0), factor4);
raytracer.translate(bigSphere2, Vector3D(0, 0, -7));
*/
}// end of scene 0
if (sceneNum==1) {
/*
raytracer.addLightSource( new BallLight(Point3D(-1, 1, 1),
5.0, Colour(0.9, 0.9, 0.9), 0.888) );
raytracer.addLightSource( new PointLight(Point3D(0, 0, 2),Colour(0.5, 0.5, 0.5)) );
*/
// Add a unit square into the scene with material mat.
SceneDagNode* sphere = raytracer.addObject( new UnitSphere(), &glass);
SceneDagNode* sphere1 = raytracer.addObject( new UnitSphere(), &brass);
SceneDagNode* plane = raytracer.addObject( new UnitSquare(), &jade);
SceneDagNode* cylinder = raytracer.addObject( new UnitCylinder(), &brass);
// Apply some transformations to the unit square.
double factor1[3] = { 1.0, 2.0, 1.0 };
double factor2[3] = { 6.0, 6.0, 1.0 };
double factor3[3] = { 0.5, 0.5, 2.0 };
raytracer.translate(sphere, Vector3D(0, 0, -5));
raytracer.rotate(sphere, 'x', -45);
raytracer.rotate(sphere, 'z', 45);
raytracer.scale(sphere, Point3D(0, 0, 0), factor1);
raytracer.translate(sphere1, Vector3D(-2.5, 0, -5));
raytracer.translate(plane, Vector3D(0, 0, -7));
raytracer.rotate(plane, 'z', 45);
raytracer.scale(plane, Point3D(0, 0, 0), factor2);
raytracer.translate(cylinder, Vector3D(3, 0, -5));
//raytracer.rotate(cylinder, 'y', -20);
raytracer.rotate(cylinder, 'z', 45);
raytracer.rotate(cylinder, 'x', -75);
raytracer.scale(cylinder, Point3D(0, 0, 0), factor3);
}// end of scene1
//=============== Scene 2 ==============================
//=====================================================
if(sceneNum == 2) {
/*
raytracer.addLightSource( new BallLight(Point3D(-1, 1, 1),
5.0, Colour(0.9, 0.9, 0.9), 0.888) );*/
//raytracer.addLightSource( new PointLight(Point3D(0, 0, 2),Colour(0.5, 0.5, 0.5)) );
//Set up walls
//========================================================
SceneDagNode* planeBack = raytracer.addObject( new UnitSquare(), &brass);
SceneDagNode* planeBottom = raytracer.addObject( new UnitSquare(), &chrome);
SceneDagNode* planeTop = raytracer.addObject( new UnitSquare(), &copperPolished);
SceneDagNode* planeLeft = raytracer.addObject( new UnitSquare(), &bronzeShiny);
SceneDagNode* planeRight = raytracer.addObject( new UnitSquare(), &brass);
SceneDagNode* planeRear = raytracer.addObject( new UnitSquare(), &brass);
double scaleFactor[3] = {8.0,8.0,1.0};
double scaleFactor1[3] = {20.01,20.01,1.0};
raytracer.translate(planeBottom, Vector3D(0, -10, 0));
raytracer.translate(planeTop, Vector3D(0, 10, 0));
raytracer.translate(planeLeft, Vector3D(-10, 0, 0));
raytracer.translate(planeRight, Vector3D(10, 0, 0));
raytracer.translate(planeBack, Vector3D(0, 0, -19.9));
raytracer.translate(planeBottom, Vector3D(0, 0, -10));
raytracer.translate(planeTop, Vector3D(0, 0, -10));
raytracer.translate(planeLeft, Vector3D(0, 0, -10));
raytracer.translate(planeRight, Vector3D(0, 0, -10));
raytracer.translate(planeRear, Vector3D(0, 0, 20));
raytracer.rotate(planeTop, 'x', 90);
raytracer.rotate(planeBottom, 'x',-90);
raytracer.rotate(planeLeft, 'y', -90);
raytracer.rotate(planeRight, 'y', 90);
raytracer.rotate(planeRear, 'x', 180);
raytracer.scale(planeBack, Point3D(0, 0, 0), scaleFactor1);
raytracer.scale(planeBottom, Point3D(0, 0, 0), scaleFactor1);
raytracer.scale(planeTop, Point3D(0, 0, 0), scaleFactor1);
raytracer.scale(planeLeft, Point3D(0, 0, 0), scaleFactor1);
raytracer.scale(planeRight, Point3D(0, 0, 0), scaleFactor1);
raytracer.scale(planeRear, Point3D(0, 0, 0), scaleFactor1);
//===========================================================
double scaleEgg[3] = { 1.0, 1.5, 1.0 };
double scaleBall[3] = {2,2,2};
SceneDagNode* sphere = raytracer.addObject( new UnitSphere(), &glass1);
SceneDagNode* sphere1 = raytracer.addObject( new UnitSphere(), &ruby);
SceneDagNode* sphere2 = raytracer.addObject( new UnitSphere(), &chrome);
//SceneDagNode* cone = raytracer.addObject(sphere, new UnitCone(), &emerald);
//raytracer.translate(cone, Vector3D(0,0,-2));
raytracer.translate(sphere, Vector3D(-1,-1,-11));
raytracer.scale(sphere, Point3D(0,0,0), scaleBall);
raytracer.translate(sphere1, Vector3D(2.5,-1,-11));
raytracer.translate(sphere2, Vector3D(2,3,-11));
//raytracer.translate(cone, Vector3D(-1,-1,-12));
raytracer.rotate(sphere1, 'z', -45);
raytracer.scale(sphere1, Point3D(0,0,0), scaleEgg);
//raytracer.rotate(cone, 'x', 90);
}//end of scene 2
//==================== Scene 3 =================
//===============================================
if(sceneNum == 3) {
#ifdef USE_EXTENDEDLIGHTS
raytracer.addLightSource( new BallLight(Point3D(-5, 5, -3),
2.0, Colour(0.4, 0.4, 0.4), 2) );
raytracer.addLightSource( new BallLight(Point3D(5, 5, -3),
2.0, Colour(0.4, 0.4, 0.4), 2) );
#else
raytracer.addLightSource( new PointLight(Point3D(-5, 5, 0),
Colour(0.5, 0.0, 0.0) ) );
raytracer.addLightSource( new PointLight(Point3D(5, 5, 0),
Colour(0.0, 0.5, 0.0) ) );
raytracer.addLightSource( new PointLight(Point3D(0, -5, 0),
Colour(0.0, 0.0, 0.5) ) );
#endif
double planeScale[3] = {10.0, 10.0, 1.0};
double sphereScale[3]= {1.5,1.5,1.5};
double coneScale[3] = {1.5,1.5,5};
SceneDagNode* plane = raytracer.addObject( new UnitSquare(), &pearl);
SceneDagNode* sphere1 = raytracer.addObject( new UnitSphere(), &chrome);
SceneDagNode* sphere2 = raytracer.addObject( new UnitSphere(), &brass);
//SceneDagNode* cone = raytracer.addObject( new UnitCone(), &turquoise);
raytracer.translate(sphere1, Vector3D(1, 1.5, -6.5));
raytracer.translate(sphere2, Vector3D(-1, -1.5, -6.5));
raytracer.scale(sphere2, Point3D(0,0,0), sphereScale);
raytracer.scale(sphere1, Point3D(0,0,0), sphereScale);
raytracer.rotate(plane, 'z', 45);
raytracer.scale(plane, Point3D(0,0,0), planeScale);
raytracer.translate(plane, Vector3D(0, 0, -8));
/*
raytracer.translate(cone, Vector3D(2.0,-1.0,-3));
raytracer.rotate(cone, 'x', 180);
raytracer.scale(cone, Point3D(0,0,0), coneScale); */
}
// Render the scene, feel free to make the image smaller for
// testing purposes.
raytracer.render(width, height, eye, view, up, fov, aa, "sig1.bmp", 's');
//raytracer.render(width, height, eye, view, up, fov, aa, "diffuse1.bmp",'d');
//raytracer.render(width, height, eye, view, up, fov, aa, "view1.bmp",'p');
// Render it from a different point of view.
Point3D eye2(4, 2, 1);
Vector3D view2(-4, -2, -6);
raytracer.render(width, height, eye2, view2, up, fov, aa, "sig2.bmp", 's');
//raytracer.render(width, height, eye2, view2, up, fov, aa, "diffuse2.bmp",'d');
//raytracer.render(width, height, eye2, view2, up, fov, aa, "view2.bmp",'p');
Point3D eye3(-4, -2, 1);
Vector3D view3(4, 2, -6);
raytracer.render(width, height, eye3, view3, up, fov, aa, "sig3.bmp", 's');
//raytracer.render(width, height, eye3, view3, up, fov, aa, "diffuse3.bmp",'d');
raytracer.render(width, height, eye3, view3, up, fov, aa, "view3.bmp",'p');
return 0;
}
