/* * Function name: twa_attach * Description: Allocates pci resources; updates sc; adds a node to the * sysctl tree to expose the driver version; makes calls * (to the Common Layer) to initialize ctlr, and to * attach to CAM. * * Input: dev -- bus device corresponding to the ctlr * Output: None * Return value: 0 -- success * non-zero-- failure */ static TW_INT32 twa_attach(device_t dev) { struct twa_softc *sc = device_get_softc(dev); TW_UINT32 command; TW_INT32 bar_num; TW_INT32 bar0_offset; TW_INT32 bar_size; TW_INT32 error; tw_osli_dbg_dprintf(3, sc, "entered"); sc->ctlr_handle.osl_ctlr_ctxt = sc; /* Initialize the softc structure. */ sc->bus_dev = dev; sc->device_id = pci_get_device(dev); /* Initialize the mutexes right here. */ sc->io_lock = &(sc->io_lock_handle); mtx_init(sc->io_lock, "tw_osl_io_lock", NULL, MTX_SPIN); sc->q_lock = &(sc->q_lock_handle); mtx_init(sc->q_lock, "tw_osl_q_lock", NULL, MTX_SPIN); sc->sim_lock = &(sc->sim_lock_handle); mtx_init(sc->sim_lock, "tw_osl_sim_lock", NULL, MTX_DEF | MTX_RECURSE); sysctl_ctx_init(&sc->sysctl_ctxt); sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctxt, SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO, device_get_nameunit(dev), CTLFLAG_RD, 0, ""); if (sc->sysctl_tree == NULL) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2000, "Cannot add sysctl tree node", ENXIO); return(ENXIO); } SYSCTL_ADD_STRING(&sc->sysctl_ctxt, SYSCTL_CHILDREN(sc->sysctl_tree), OID_AUTO, "driver_version", CTLFLAG_RD, TW_OSL_DRIVER_VERSION_STRING, 0, "TWA driver version"); /* Make sure we are going to be able to talk to this board. */ command = pci_read_config(dev, PCIR_COMMAND, 2); if ((command & PCIM_CMD_PORTEN) == 0) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2001, "Register window not available", ENXIO); tw_osli_free_resources(sc); return(ENXIO); } /* Force the busmaster enable bit on, in case the BIOS forgot. */ command |= PCIM_CMD_BUSMASTEREN; pci_write_config(dev, PCIR_COMMAND, command, 2); /* Allocate the PCI register window. */ if ((error = tw_cl_get_pci_bar_info(sc->device_id, TW_CL_BAR_TYPE_MEM, &bar_num, &bar0_offset, &bar_size))) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x201F, "Can't get PCI BAR info", error); tw_osli_free_resources(sc); return(error); } sc->reg_res_id = PCIR_BARS + bar0_offset; if ((sc->reg_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &(sc->reg_res_id), 0, ~0, 1, RF_ACTIVE)) == NULL) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2002, "Can't allocate register window", ENXIO); tw_osli_free_resources(sc); return(ENXIO); } sc->bus_tag = rman_get_bustag(sc->reg_res); sc->bus_handle = rman_get_bushandle(sc->reg_res); /* Allocate and register our interrupt. */ sc->irq_res_id = 0; if ((sc->irq_res = bus_alloc_resource(sc->bus_dev, SYS_RES_IRQ, &(sc->irq_res_id), 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE)) == NULL) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2003, "Can't allocate interrupt", ENXIO); tw_osli_free_resources(sc); return(ENXIO); } if ((error = twa_setup_intr(sc))) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2004, "Can't set up interrupt", error); tw_osli_free_resources(sc); return(error); } if ((error = tw_osli_alloc_mem(sc))) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2005, "Memory allocation failure", error); tw_osli_free_resources(sc); return(error); } /* Initialize the Common Layer for this controller. */ if ((error = tw_cl_init_ctlr(&sc->ctlr_handle, sc->flags, sc->device_id, TW_OSLI_MAX_NUM_REQUESTS, TW_OSLI_MAX_NUM_AENS, sc->non_dma_mem, sc->dma_mem, sc->dma_mem_phys ))) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2006, "Failed to initialize Common Layer/controller", error); tw_osli_free_resources(sc); return(error); } /* Create the control device. */ sc->ctrl_dev = make_dev(&twa_cdevsw, device_get_unit(sc->bus_dev), UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR, "twa%d", device_get_unit(sc->bus_dev)); sc->ctrl_dev->si_drv1 = sc; if ((error = tw_osli_cam_attach(sc))) { tw_osli_free_resources(sc); tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2007, "Failed to initialize CAM", error); return(error); } sc->watchdog_index = 0; callout_init(&(sc->watchdog_callout[0]), CALLOUT_MPSAFE); callout_init(&(sc->watchdog_callout[1]), CALLOUT_MPSAFE); callout_reset(&(sc->watchdog_callout[0]), 5*hz, twa_watchdog, &sc->ctlr_handle); return(0); }
/* * Function name: twa_attach * Description: Allocates pci resources; updates sc; adds a node to the * sysctl tree to expose the driver version; makes calls * (to the Common Layer) to initialize ctlr, and to * attach to CAM. * * Input: dev -- bus device corresponding to the ctlr * Output: None * Return value: 0 -- success * non-zero-- failure */ static TW_INT32 twa_attach(device_t dev) { struct twa_softc *sc = device_get_softc(dev); TW_INT32 bar_num; TW_INT32 bar0_offset; TW_INT32 bar_size; TW_INT32 irq_flags; TW_INT32 error; sc->ctlr_handle.osl_ctlr_ctxt = sc; /* Initialize the softc structure. */ sc->bus_dev = dev; tw_osli_dbg_dprintf(3, sc, "entered"); sc->device_id = pci_get_device(dev); /* Initialize the mutexes right here. */ sc->io_lock = &(sc->io_lock_handle); spin_init(sc->io_lock, "twa_iolock"); sc->q_lock = &(sc->q_lock_handle); spin_init(sc->q_lock, "twa_qlock"); sc->sim_lock = &(sc->sim_lock_handle); lockinit(sc->sim_lock, "tw_osl_sim_lock", 0, LK_CANRECURSE); SYSCTL_ADD_STRING(device_get_sysctl_ctx(dev), SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, "driver_version", CTLFLAG_RD, TW_OSL_DRIVER_VERSION_STRING, 0, "TWA driver version"); /* Force the busmaster enable bit on, in case the BIOS forgot. */ pci_enable_busmaster(dev); /* Allocate the PCI register window. */ if ((error = tw_cl_get_pci_bar_info(sc->device_id, TW_CL_BAR_TYPE_MEM, &bar_num, &bar0_offset, &bar_size))) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x201F, "Can't get PCI BAR info", error); tw_osli_free_resources(sc); return(error); } sc->reg_res_id = PCIR_BARS + bar0_offset; if ((sc->reg_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &(sc->reg_res_id), 0, ~0, 1, RF_ACTIVE)) == NULL) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2002, "Can't allocate register window", ENXIO); tw_osli_free_resources(sc); return(ENXIO); } sc->bus_tag = rman_get_bustag(sc->reg_res); sc->bus_handle = rman_get_bushandle(sc->reg_res); /* Allocate and register our interrupt. */ sc->irq_res_id = 0; sc->irq_type = pci_alloc_1intr(sc->bus_dev, twa_msi_enable, &sc->irq_res_id, &irq_flags); if ((sc->irq_res = bus_alloc_resource(sc->bus_dev, SYS_RES_IRQ, &(sc->irq_res_id), 0, ~0, 1, irq_flags)) == NULL) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2003, "Can't allocate interrupt", ENXIO); tw_osli_free_resources(sc); return(ENXIO); } if ((error = twa_setup_intr(sc))) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2004, "Can't set up interrupt", error); tw_osli_free_resources(sc); return(error); } if ((error = tw_osli_alloc_mem(sc))) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2005, "Memory allocation failure", error); tw_osli_free_resources(sc); return(error); } /* Initialize the Common Layer for this controller. */ if ((error = tw_cl_init_ctlr(&sc->ctlr_handle, sc->flags, sc->device_id, TW_OSLI_MAX_NUM_REQUESTS, TW_OSLI_MAX_NUM_AENS, sc->non_dma_mem, sc->dma_mem, sc->dma_mem_phys ))) { tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2006, "Failed to initialize Common Layer/controller", error); tw_osli_free_resources(sc); return(error); } /* Create the control device. */ sc->ctrl_dev = make_dev(&twa_ops, device_get_unit(sc->bus_dev), UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR, "twa%d", device_get_unit(sc->bus_dev)); sc->ctrl_dev->si_drv1 = sc; if ((error = tw_osli_cam_attach(sc))) { tw_osli_free_resources(sc); tw_osli_printf(sc, "error = %d", TW_CL_SEVERITY_ERROR_STRING, TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER, 0x2007, "Failed to initialize CAM", error); return(error); } sc->watchdog_index = 0; callout_init_mp(&(sc->watchdog_callout[0])); callout_init_mp(&(sc->watchdog_callout[1])); callout_reset(&(sc->watchdog_callout[0]), 5*hz, twa_watchdog, &sc->ctlr_handle); return(0); }