Esempio n. 1
0
static boolean rFind(struct bptFile *bpt, bits64 blockStart, void *key, void *val)
/* Find value corresponding to key.  If found copy value to memory pointed to by val and return 
 * true. Otherwise return false. */
{
/* Seek to start of block. */
udcSeek(bpt->udc, blockStart);

/* Read block header. */
UBYTE isLeaf;
UBYTE reserved;
bits16 i, childCount;
udcMustReadOne(bpt->udc, isLeaf);
udcMustReadOne(bpt->udc, reserved);
boolean isSwapped = bpt->isSwapped;
childCount = udcReadBits16(bpt->udc, isSwapped);

UBYTE keyBuf[bpt->keySize];   /* Place to put a key, buffered on stack. */

if (isLeaf)
    {
    for (i=0; i<childCount; ++i)
        {
	udcMustRead(bpt->udc, keyBuf, bpt->keySize);
	udcMustRead(bpt->udc, val, bpt->valSize);
	if (memcmp(key, keyBuf, bpt->keySize) == 0)
	    return TRUE;
	}
    return FALSE;
    }
else
    {
    /* Read and discard first key. */
    udcMustRead(bpt->udc, keyBuf, bpt->keySize);

    /* Scan info for first file offset. */
    bits64 fileOffset = udcReadBits64(bpt->udc, isSwapped);

    /* Loop through remainder. */
    for (i=1; i<childCount; ++i)
	{
	udcMustRead(bpt->udc, keyBuf, bpt->keySize);
	if (memcmp(key, keyBuf, bpt->keySize) < 0)
	    break;
	fileOffset = udcReadBits64(bpt->udc, isSwapped);
	}
    return rFind(bpt, fileOffset, key, val);
    }
}
Esempio n. 2
0
static bits64 bptDataStart(struct bptFile *bpt)
/* Return offset of first bit of data (as opposed to index) in file.  In hind sight I wish
 * this were stored in the header, but fortunately it's not that hard to compute. */
{
bits64 offset = bpt->rootOffset;
for (;;)
    {
    /* Seek to block start */
    udcSeek(bpt->udc, offset);

    /* Read block header,  break if we are leaf. */
    UBYTE isLeaf;
    UBYTE reserved;
    bits16 childCount;
    udcMustReadOne(bpt->udc, isLeaf);
    if (isLeaf)
         break;
    udcMustReadOne(bpt->udc, reserved);
    boolean isSwapped = bpt->isSwapped;
    childCount = udcReadBits16(bpt->udc, isSwapped);

    /* Read and discard first key. */
    char keyBuf[bpt->keySize];
    udcMustRead(bpt->udc, keyBuf, bpt->keySize);

    /* Get file offset of sub-block. */
    offset = udcReadBits64(bpt->udc, isSwapped);
    }
return offset;
}
Esempio n. 3
0
enum metaBigFileType isBigWigOrBed(char* filename)
/* Peak at a file to see if it's bigWig */
{
    enum metaBigFileType ret = isNotBig;
    bits32 magic;
    struct udcFile* udc;
    udc = udcFileOpen(filename, udcDefaultDir());
    /* Read magic number at head of file and use it to see if we are proper file type, and
     * see if we are byte-swapped. */
    udcMustRead(udc, &magic, sizeof(magic));
    if (magic == bigWigSig)
        ret = isaBigWig;
    else if (magic == bigBedSig)
        ret = isaBigBed;
    if (ret != isNotBig) {
        udcFileClose(&udc);
        return ret;
    }
    magic = byteSwap32(magic);
    if (magic == bigWigSig)
        ret = isaBigWig;
    else if (magic == bigBedSig)
        ret = isaBigBed;
    udcFileClose(&udc);
    return ret;
}
Esempio n. 4
0
void bptKeyAtPos(struct bptFile *bpt, bits64 itemPos, void *result)
/* Fill in result with the key at given itemPos.  For first piece of data itemPos is 0 
 * Result must be at least bpt->keySize.  If result is a string it won't be zero terminated
 * by this routine.  Use bptStringKeyAtPos instead. */
{
bits64 offset = bptDataOffset(bpt, itemPos);
udcSeek(bpt->udc, offset);
udcMustRead(bpt->udc, result, bpt->keySize);
}
Esempio n. 5
0
static void rTraverse(struct bptFile *bpt, bits64 blockStart, void *context, 
    void (*callback)(void *context, void *key, int keySize, void *val, int valSize) )
/* Recursively go across tree, calling callback at leaves. */
{
/* Seek to start of block. */
udcSeek(bpt->udc, blockStart);

/* Read block header. */
UBYTE isLeaf;
UBYTE reserved;
bits16 i, childCount;
udcMustReadOne(bpt->udc, isLeaf);
udcMustReadOne(bpt->udc, reserved);
boolean isSwapped = bpt->isSwapped;
childCount = udcReadBits16(bpt->udc, isSwapped);

char keyBuf[bpt->keySize], valBuf[bpt->valSize];
if (isLeaf)
    {
    for (i=0; i<childCount; ++i)
        {
	udcMustRead(bpt->udc, keyBuf, bpt->keySize);
	udcMustRead(bpt->udc, valBuf, bpt->valSize);
	callback(context, keyBuf, bpt->keySize, valBuf, bpt->valSize);
	}
    }
else
    {
    bits64 fileOffsets[childCount];
    /* Loop through to get file offsets of children. */
    for (i=0; i<childCount; ++i)
	{
	udcMustRead(bpt->udc, keyBuf, bpt->keySize);
	fileOffsets[i] = udcReadBits64(bpt->udc, isSwapped);
	}
    /* Loop through recursing on child offsets. */
    for (i=0; i<childCount; ++i)
	rTraverse(bpt, fileOffsets[i], context, callback);
    }
}
Esempio n. 6
0
static bool downloadBlockRun(BigFileReaderData * data, char * chrom, struct fileOffsetSize * firstBlock, struct fileOffsetSize * afterBlock, bits64 mergedSize) {
	char * mergedBuf, *blockBuf;
	struct fileOffsetSize * block;

	udcSeek(data->udc, firstBlock->offset);
	blockBuf = mergedBuf = (char *) needLargeMem(mergedSize);
	udcMustRead(data->udc, mergedBuf, mergedSize);

	for (block = firstBlock; block != afterBlock; block = block->next) {
		if (openBlock(data, block, blockBuf)) {
			freeMem(mergedBuf);
			return true;
		}
		blockBuf += block->size;
	}

	freeMem(mergedBuf);
	return false;
}
Esempio n. 7
0
static void rFindMulti(struct bptFile *bpt, bits64 blockStart, void *key, struct slRef **pList)
/* Find values corresponding to key and add them to pList.  You'll need to 
 * Do a slRefFreeListAndVals() on the list when done. */
{
/* Seek to start of block. */
udcSeek(bpt->udc, blockStart);

/* Read block header. */
UBYTE isLeaf;
UBYTE reserved;
bits16 i, childCount;
udcMustReadOne(bpt->udc, isLeaf);
udcMustReadOne(bpt->udc, reserved);
boolean isSwapped = bpt->isSwapped;
childCount = udcReadBits16(bpt->udc, isSwapped);

int keySize = bpt->keySize;
UBYTE keyBuf[keySize];   /* Place to put a key, buffered on stack. */
UBYTE valBuf[bpt->valSize];   /* Place to put a value, buffered on stack. */

if (isLeaf)
    {
    for (i=0; i<childCount; ++i)
        {
	udcMustRead(bpt->udc, keyBuf, keySize);
	udcMustRead(bpt->udc, valBuf, bpt->valSize);
	if (memcmp(key, keyBuf, keySize) == 0)
	    {
	    void *val = cloneMem(valBuf, bpt->valSize);
	    refAdd(pList, val);
	    }
	}
    }
else
    {
    /* Read first key and first file offset. */
    udcMustRead(bpt->udc, keyBuf, keySize);
    bits64 lastFileOffset = udcReadBits64(bpt->udc, isSwapped);
    bits64 fileOffset = lastFileOffset;
    int lastCmp = memcmp(key, keyBuf, keySize);

    /* Loop through remainder. */
    for (i=1; i<childCount; ++i)
	{
	udcMustRead(bpt->udc, keyBuf, keySize);
	fileOffset = udcReadBits64(bpt->udc, isSwapped);
	int cmp = memcmp(key, keyBuf, keySize);
	if (lastCmp >= 0 && cmp <= 0)
	    {
	    bits64 curPos = udcTell(bpt->udc);
	    rFindMulti(bpt, lastFileOffset, key, pList);
	    udcSeek(bpt->udc, curPos);
	    }
	if (cmp < 0)
	    return;
	lastCmp = cmp;
	lastFileOffset = fileOffset;
	}
    /* If made it all the way to end, do last one too. */
    rFindMulti(bpt, fileOffset, key, pList);
    }
}
int bigWigIntervalDump(struct bbiFile *bwf, char *chrom, bits32 start, bits32 end, int maxCount,
	FILE *out)
/* Print out info on bigWig parts that intersect chrom:start-end.   Set maxCount to 0 if you 
 * don't care how many are printed.  Returns number printed. */
{
if (bwf->typeSig != bigWigSig)
   errAbort("Trying to do bigWigIntervalDump on a non big-wig file.");
bbiAttachUnzoomedCir(bwf);
struct fileOffsetSize *blockList = bbiOverlappingBlocks(bwf, bwf->unzoomedCir, 
	chrom, start, end, NULL);
struct fileOffsetSize *block, *beforeGap, *afterGap;
struct udcFile *udc = bwf->udc;
int printCount = 0;

/* Set up for uncompression optionally. */
char *uncompressBuf = NULL;
if (bwf->uncompressBufSize > 0)
    uncompressBuf = needLargeMem(bwf->uncompressBufSize);

/* This loop is a little complicated because we merge the read requests for efficiency, but we 
 * have to then go back through the data one unmerged block at a time. */
for (block = blockList; block != NULL; )
    {
    /* Find contigious blocks and read them into mergedBuf. */
    fileOffsetSizeFindGap(block, &beforeGap, &afterGap);
    bits64 mergedOffset = block->offset;
    bits64 mergedSize = beforeGap->offset + beforeGap->size - mergedOffset;
    udcSeek(udc, mergedOffset);
    char *mergedBuf = needLargeMem(mergedSize);
    udcMustRead(udc, mergedBuf, mergedSize);
    char *blockBuf = mergedBuf;

    /* Loop through individual blocks within merged section. */
    for (;block != afterGap; block = block->next)
        {
	/* Uncompress if necessary. */
	char *blockPt, *blockEnd;
	if (uncompressBuf)
	    {
	    blockPt = uncompressBuf;
	    int uncSize = zUncompress(blockBuf, block->size, uncompressBuf, bwf->uncompressBufSize);
	    blockEnd = blockPt + uncSize;
	    }
	else
	    {
	    blockPt = blockBuf;
	    blockEnd = blockPt + block->size;
	    }

	/* Do the actual dump. */
	int oneCount = bigWigBlockDumpIntersectingRange(bwf->isSwapped, blockPt, blockEnd, 
		chrom, start, end, maxCount, out);

	/* Keep track of how many dumped, not exceeding maximum. */
	printCount += oneCount;
	if (maxCount != 0)
	    {
	    if (oneCount >= maxCount)
		break;
	    maxCount -= oneCount;
	    }
	blockBuf += block->size;
	}
    freeMem(mergedBuf);
    }
freeMem(uncompressBuf);

slFreeList(&blockList);
return printCount;
}
struct bbiInterval *bigWigIntervalQuery(struct bbiFile *bwf, char *chrom, bits32 start, bits32 end,
	struct lm *lm)
/* Get data for interval.  Return list allocated out of lm. */
{
if (bwf->typeSig != bigWigSig)
   errAbort("Trying to do bigWigIntervalQuery on a non big-wig file.");
bbiAttachUnzoomedCir(bwf);
struct bbiInterval *el, *list = NULL;
struct fileOffsetSize *blockList = bbiOverlappingBlocks(bwf, bwf->unzoomedCir, 
	chrom, start, end, NULL);
struct fileOffsetSize *block, *beforeGap, *afterGap;
struct udcFile *udc = bwf->udc;
boolean isSwapped = bwf->isSwapped;
float val;
int i;

/* Set up for uncompression optionally. */
char *uncompressBuf = NULL;
if (bwf->uncompressBufSize > 0)
    uncompressBuf = needLargeMem(bwf->uncompressBufSize);

/* This loop is a little complicated because we merge the read requests for efficiency, but we 
 * have to then go back through the data one unmerged block at a time. */
for (block = blockList; block != NULL; )
    {
    /* Find contigious blocks and read them into mergedBuf. */
    fileOffsetSizeFindGap(block, &beforeGap, &afterGap);
    bits64 mergedOffset = block->offset;
    bits64 mergedSize = beforeGap->offset + beforeGap->size - mergedOffset;
    udcSeek(udc, mergedOffset);
    char *mergedBuf = needLargeMem(mergedSize);
    udcMustRead(udc, mergedBuf, mergedSize);
    char *blockBuf = mergedBuf;

    /* Loop through individual blocks within merged section. */
    for (;block != afterGap; block = block->next)
        {
	/* Uncompress if necessary. */
	char *blockPt, *blockEnd;
	if (uncompressBuf)
	    {
	    blockPt = uncompressBuf;
	    int uncSize = zUncompress(blockBuf, block->size, uncompressBuf, bwf->uncompressBufSize);
	    blockEnd = blockPt + uncSize;
	    }
	else
	    {
	    blockPt = blockBuf;
	    blockEnd = blockPt + block->size;
	    }

	/* Deal with insides of block. */
	struct bwgSectionHead head;
	bwgSectionHeadFromMem(&blockPt, &head, isSwapped);
	switch (head.type)
	    {
	    case bwgTypeBedGraph:
		{
		for (i=0; i<head.itemCount; ++i)
		    {
		    bits32 s = memReadBits32(&blockPt, isSwapped);
		    bits32 e = memReadBits32(&blockPt, isSwapped);
		    val = memReadFloat(&blockPt, isSwapped);
		    if (s < start) s = start;
		    if (e > end) e = end;
		    if (s < e)
			{
			lmAllocVar(lm, el);
			el->start = s;
			el->end = e;
			el->val = val;
			slAddHead(&list, el);
			}
		    }
		break;
		}
	    case bwgTypeVariableStep:
		{
		for (i=0; i<head.itemCount; ++i)
		    {
		    bits32 s = memReadBits32(&blockPt, isSwapped);
		    bits32 e = s + head.itemSpan;
		    val = memReadFloat(&blockPt, isSwapped);
		    if (s < start) s = start;
		    if (e > end) e = end;
		    if (s < e)
			{
			lmAllocVar(lm, el);
			el->start = s;
			el->end = e;
			el->val = val;
			slAddHead(&list, el);
			}
		    }
		break;
		}
	    case bwgTypeFixedStep:
		{
		bits32 s = head.start;
		bits32 e = s + head.itemSpan;
		for (i=0; i<head.itemCount; ++i)
		    {
		    val = memReadFloat(&blockPt, isSwapped);
		    bits32 clippedS = s, clippedE = e;
		    if (clippedS < start) clippedS = start;
		    if (clippedE > end) clippedE = end;
		    if (clippedS < clippedE)
			{
			lmAllocVar(lm, el);
			el->start = clippedS;
			el->end = clippedE;
			el->val = val;
			slAddHead(&list, el);
			}
		    s += head.itemStep;
		    e += head.itemStep;
		    }
		break;
		}
	    default:
		internalErr();
		break;
	    }
	assert(blockPt == blockEnd);
	blockBuf += block->size;
	}
    freeMem(mergedBuf);
    }
freeMem(uncompressBuf);
slFreeList(&blockList);
slReverse(&list);
return list;
}
Esempio n. 10
0
static void fetchIntoBuf(struct bbiFile *bwf, char *chrom, bits32 start, bits32 end,
	struct bigWigValsOnChrom *chromVals)
/* Get data for interval.  Return list allocated out of lm. */
{
/* A lot of code duplicated with bigWigIntervalQuery, but here the clipping
 * is simplified since always working across full chromosome, and the output is
 * different.  Since both of these are in inner loops and speed critical, it's hard
 * to factor out without perhaps making it worse than the bit of duplication. */
if (bwf->typeSig != bigWigSig)
   errAbort("Trying to do fetchIntoBuf on a non big-wig file.");
bbiAttachUnzoomedCir(bwf);
struct fileOffsetSize *blockList = bbiOverlappingBlocks(bwf, bwf->unzoomedCir, 
	chrom, start, end, NULL);
struct fileOffsetSize *block, *beforeGap, *afterGap;
struct udcFile *udc = bwf->udc;
boolean isSwapped = bwf->isSwapped;
float val;
int i;
Bits *covBuf = chromVals->covBuf;
double *valBuf = chromVals->valBuf;

/* Set up for uncompression optionally. */
char *uncompressBuf = NULL;
if (bwf->uncompressBufSize > 0)
    uncompressBuf = needLargeMem(bwf->uncompressBufSize);

/* This loop is a little complicated because we merge the read requests for efficiency, but we 
 * have to then go back through the data one unmerged block at a time. */
for (block = blockList; block != NULL; )
    {
    /* Find contigious blocks and read them into mergedBuf. */
    fileOffsetSizeFindGap(block, &beforeGap, &afterGap);
    bits64 mergedOffset = block->offset;
    bits64 mergedSize = beforeGap->offset + beforeGap->size - mergedOffset;
    udcSeek(udc, mergedOffset);
    char *mergedBuf = needLargeMem(mergedSize);
    udcMustRead(udc, mergedBuf, mergedSize);
    char *blockBuf = mergedBuf;

    /* Loop through individual blocks within merged section. */
    for (;block != afterGap; block = block->next)
        {
	/* Uncompress if necessary. */
	char *blockPt, *blockEnd;
	if (uncompressBuf)
	    {
	    blockPt = uncompressBuf;
	    int uncSize = zUncompress(blockBuf, block->size, uncompressBuf, bwf->uncompressBufSize);
	    blockEnd = blockPt + uncSize;
	    }
	else
	    {
	    blockPt = blockBuf;
	    blockEnd = blockPt + block->size;
	    }

	/* Deal with insides of block. */
	struct bwgSectionHead head;
	bwgSectionHeadFromMem(&blockPt, &head, isSwapped);
	switch (head.type)
	    {
	    case bwgTypeBedGraph:
		{
		for (i=0; i<head.itemCount; ++i)
		    {
		    bits32 s = memReadBits32(&blockPt, isSwapped);
		    bits32 e = memReadBits32(&blockPt, isSwapped);
		    bitSetRange(covBuf, s, e-s);
		    val = memReadFloat(&blockPt, isSwapped);
		    bits32 j;
		    for (j=s; j<e; ++j)
		        valBuf[j] = val;
		    }
		break;
		}
	    case bwgTypeVariableStep:
		{
		for (i=0; i<head.itemCount; ++i)
		    {
		    bits32 s = memReadBits32(&blockPt, isSwapped);
		    val = memReadFloat(&blockPt, isSwapped);
		    bitSetRange(covBuf, s, head.itemSpan);
		    bits32 e = s + head.itemSpan;
		    bits32 j;
		    for (j=s; j<e; ++j)
		        valBuf[j] = val;
		    }
		break;
		}
	    case bwgTypeFixedStep:
		{
		/* Do a little optimization for the most common and worst case - step1/span1 */
		if (head.itemStep == 1 && head.itemSpan == 1)
		    {
		    bits32 s = head.start;
		    bits32 e = head.end;
		    bitSetRange(covBuf, s, e-s);
		    bits32 j;
		    for (j=s; j<e; ++j)
		        valBuf[j] = memReadFloat(&blockPt, isSwapped);
		    }
		else
		    {
		    bits32 s = head.start;
		    bits32 e = s + head.itemSpan;
		    for (i=0; i<head.itemCount; ++i)
			{
			bitSetRange(covBuf, s, head.itemSpan);
			val = memReadFloat(&blockPt, isSwapped);
			bits32 j;
			for (j=s; j<e; ++j)
			    valBuf[j] = val;
			s += head.itemStep;
			e += head.itemStep;
			}
		    }
		break;
		}
	    default:
		internalErr();
		break;
	    }
	assert(blockPt == blockEnd);
	blockBuf += block->size;
	}
    freeMem(mergedBuf);
    }
freeMem(uncompressBuf);
slFreeList(&blockList);
}
Esempio n. 11
0
struct bbiFile *bbiFileOpenWithDir(char *fileName, bits32 sig, char *typeName, char *udcDir)
/* same (mostly) as bbiFileOpen in bbiFile.c, but allows setting the temporary dir */
{
    struct bbiFile *bbi;
    AllocVar(bbi);
    bbi->fileName = cloneString(fileName);
    struct udcFile *udc = bbi->udc = udcFileOpen(fileName, udcDir);
    /* Read magic number at head of file and use it to see if we are proper file type, and
     * see if we are byte-swapped. */
    bits32 magic;
    boolean isSwapped = FALSE;
    udcMustRead(udc, &magic, sizeof(magic));
    if (magic != sig)
    {
	magic = byteSwap32(magic);
	isSwapped = TRUE;
	if (magic != sig)
	    errAbort("%s is not a %s file", fileName, typeName);
    }
    bbi->typeSig = sig;
    bbi->isSwapped = isSwapped;

/* Read rest of defined bits of header, byte swapping as needed. */
    bbi->version = udcReadBits16(udc, isSwapped);
    bbi->zoomLevels = udcReadBits16(udc, isSwapped);
    bbi->chromTreeOffset = udcReadBits64(udc, isSwapped);
    bbi->unzoomedDataOffset = udcReadBits64(udc, isSwapped);
    bbi->unzoomedIndexOffset = udcReadBits64(udc, isSwapped);
    bbi->fieldCount = udcReadBits16(udc, isSwapped);
    bbi->definedFieldCount = udcReadBits16(udc, isSwapped);
    bbi->asOffset = udcReadBits64(udc, isSwapped);
    bbi->totalSummaryOffset = udcReadBits64(udc, isSwapped);
    bbi->uncompressBufSize = udcReadBits32(udc, isSwapped);
    bbi->extensionOffset = udcReadBits64(udc, isSwapped);

/* Read zoom headers. */
    int i;
    struct bbiZoomLevel *level, *levelList = NULL;
    for (i=0; i<bbi->zoomLevels; ++i)
    {
	AllocVar(level);
	level->reductionLevel = udcReadBits32(udc, isSwapped);
	level->reserved = udcReadBits32(udc, isSwapped);
	level->dataOffset = udcReadBits64(udc, isSwapped);
	level->indexOffset = udcReadBits64(udc, isSwapped);
	slAddHead(&levelList, level);
    }
    slReverse(&levelList);
    bbi->levelList = levelList;

/* Deal with header extension if any. */
    if (bbi->extensionOffset != 0)
    {
	udcSeek(udc, bbi->extensionOffset);
	bbi->extensionSize = udcReadBits16(udc, isSwapped);
	bbi->extraIndexCount = udcReadBits16(udc, isSwapped);
	bbi->extraIndexListOffset = udcReadBits64(udc, isSwapped);
    }

/* Attach B+ tree of chromosome names and ids. */
    udcSeek(udc, bbi->chromTreeOffset);
    bbi->chromBpt =  bptFileAttach(fileName, udc);

    return bbi;
}
Esempio n. 12
0
struct bigBedInterval *bigBedIntervalQuery(struct bbiFile *bbi, char *chrom,
	bits32 start, bits32 end, int maxItems, struct lm *lm)
/* Get data for interval.  Return list allocated out of lm.  Set maxItems to maximum
 * number of items to return, or to 0 for all items. */
{
struct bigBedInterval *el, *list = NULL;
int itemCount = 0;
bbiAttachUnzoomedCir(bbi);
bits32 chromId;
struct fileOffsetSize *blockList = bbiOverlappingBlocks(bbi, bbi->unzoomedCir,
	chrom, start, end, &chromId);
struct fileOffsetSize *block, *beforeGap, *afterGap;
struct udcFile *udc = bbi->udc;
boolean isSwapped = bbi->isSwapped;
struct dyString *dy = dyStringNew(32);

/* Set up for uncompression optionally. */
char *uncompressBuf = NULL;
if (bbi->uncompressBufSize > 0)
    uncompressBuf = needLargeMem(bbi->uncompressBufSize);

for (block = blockList; block != NULL; )
    {
    /* Find contigious blocks and read them into mergedBuf. */
    fileOffsetSizeFindGap(block, &beforeGap, &afterGap);
    bits64 mergedOffset = block->offset;
    bits64 mergedSize = beforeGap->offset + beforeGap->size - mergedOffset;
    udcSeek(udc, mergedOffset);
    char *mergedBuf = needLargeMem(mergedSize);
    udcMustRead(udc, mergedBuf, mergedSize);
    char *blockBuf = mergedBuf;

    /* Loop through individual blocks within merged section. */
    for (;block != afterGap; block = block->next)
        {
	/* Uncompress if necessary. */
	char *blockPt, *blockEnd;
	if (uncompressBuf)
	    {
	    blockPt = uncompressBuf;
	    int uncSize = zUncompress(blockBuf, block->size, uncompressBuf, bbi->uncompressBufSize);
	    blockEnd = blockPt + uncSize;
	    }
	else
	    {
	    blockPt = blockBuf;
	    blockEnd = blockPt + block->size;
	    }

	while (blockPt < blockEnd)
	    {
	    /* Read next record into local variables. */
	    bits32 chr = memReadBits32(&blockPt, isSwapped);	// Read and discard chromId
	    bits32 s = memReadBits32(&blockPt, isSwapped);
	    bits32 e = memReadBits32(&blockPt, isSwapped);
	    int c;
	    dyStringClear(dy);
	    // TODO - can simplify this probably just to for (;;) {if ((c = *blockPt++) == 0) ...
	    while ((c = *blockPt++) >= 0)
		{
		if (c == 0)
		    break;
		dyStringAppendC(dy, c);
		}

	    /* If we're actually in range then copy it into a new  element and add to list. */
	    if (chr == chromId && s < end && e > start)
		{
		++itemCount;
		if (maxItems > 0 && itemCount > maxItems)
		    break;

		lmAllocVar(lm, el);
		el->start = s;
		el->end = e;
		if (dy->stringSize > 0)
		    el->rest = lmCloneString(lm, dy->string);
		el->chromId = chromId;
		slAddHead(&list, el);
		}
	    }
	if (maxItems > 0 && itemCount > maxItems)
	    break;
	blockBuf += block->size;
        }
    if (maxItems > 0 && itemCount > maxItems)
        break;
    freez(&mergedBuf);
    }
freeMem(uncompressBuf);
dyStringFree(&dy);
slFreeList(&blockList);
slReverse(&list);
return list;
}
struct bbiFile *bbiFileOpen(char *fileName, bits32 sig, char *typeName)
/* Open up big wig or big bed file. */
{
/* This code needs to agree with code in two other places currently - bigBedFileCreate,
 * and bigWigFileCreate.  I'm thinking of refactoring to share at least between
 * bigBedFileCreate and bigWigFileCreate.  It'd be great so it could be structured
 * so that it could send the input in one chromosome at a time, and send in the zoom
 * stuff only after all the chromosomes are done.  This'd potentially reduce the memory
 * footprint by a factor of 2 or 4.  Still, for now it works. -JK */
struct bbiFile *bbi;
AllocVar(bbi);
bbi->fileName = cloneString(fileName);
struct udcFile *udc = bbi->udc = udcFileOpen(fileName, udcDefaultDir());

/* Read magic number at head of file and use it to see if we are proper file type, and
 * see if we are byte-swapped. */
bits32 magic;
boolean isSwapped = FALSE;
udcMustRead(udc, &magic, sizeof(magic));
if (magic != sig)
    {
    magic = byteSwap32(magic);
    isSwapped = TRUE;
    if (magic != sig)
       errAbort("%s is not a %s file", fileName, typeName);
    }
bbi->typeSig = sig;
bbi->isSwapped = isSwapped;

/* Read rest of defined bits of header, byte swapping as needed. */
bbi->version = udcReadBits16(udc, isSwapped);
bbi->zoomLevels = udcReadBits16(udc, isSwapped);
bbi->chromTreeOffset = udcReadBits64(udc, isSwapped);
bbi->unzoomedDataOffset = udcReadBits64(udc, isSwapped);
bbi->unzoomedIndexOffset = udcReadBits64(udc, isSwapped);
bbi->fieldCount = udcReadBits16(udc, isSwapped);
bbi->definedFieldCount = udcReadBits16(udc, isSwapped);
bbi->asOffset = udcReadBits64(udc, isSwapped);
bbi->totalSummaryOffset = udcReadBits64(udc, isSwapped);
bbi->uncompressBufSize = udcReadBits32(udc, isSwapped);

/* Skip over reserved area. */
udcSeek(udc, 64);

/* Read zoom headers. */
int i;
struct bbiZoomLevel *level, *levelList = NULL;
for (i=0; i<bbi->zoomLevels; ++i)
    {
    AllocVar(level);
    level->reductionLevel = udcReadBits32(udc, isSwapped);
    level->reserved = udcReadBits32(udc, isSwapped);
    level->dataOffset = udcReadBits64(udc, isSwapped);
    level->indexOffset = udcReadBits64(udc, isSwapped);
    slAddHead(&levelList, level);
    }
slReverse(&levelList);
bbi->levelList = levelList;

/* Attach B+ tree of chromosome names and ids. */
udcSeek(udc, bbi->chromTreeOffset);
bbi->chromBpt =  bptFileAttach(fileName, udc);

return bbi;
}
static struct bbiSummary *bbiSummariesInRegion(struct bbiZoomLevel *zoom, struct bbiFile *bbi, 
	int chromId, bits32 start, bits32 end)
/* Return list of all summaries in region at given zoom level of bbiFile. */
{
struct bbiSummary *sumList = NULL, *sum;
struct udcFile *udc = bbi->udc;
udcSeek(udc, zoom->indexOffset);
struct cirTreeFile *ctf = cirTreeFileAttach(bbi->fileName, bbi->udc);
struct fileOffsetSize *blockList = cirTreeFindOverlappingBlocks(ctf, chromId, start, end);
struct fileOffsetSize *block, *beforeGap, *afterGap;

/* Set up for uncompression optionally. */
char *uncompressBuf = NULL;
if (bbi->uncompressBufSize > 0)
    uncompressBuf = needLargeMem(bbi->uncompressBufSize);


/* This loop is a little complicated because we merge the read requests for efficiency, but we 
 * have to then go back through the data one unmerged block at a time. */
for (block = blockList; block != NULL; )
    {
    /* Find contigious blocks and read them into mergedBuf. */
    fileOffsetSizeFindGap(block, &beforeGap, &afterGap);
    bits64 mergedOffset = block->offset;
    bits64 mergedSize = beforeGap->offset + beforeGap->size - mergedOffset;
    udcSeek(udc, mergedOffset);
    char *mergedBuf = needLargeMem(mergedSize);
    udcMustRead(udc, mergedBuf, mergedSize);
    char *blockBuf = mergedBuf;

    /* Loop through individual blocks within merged section. */
    for (;block != afterGap; block = block->next)
        {
	/* Uncompress if necessary. */
	char *blockPt, *blockEnd;
	if (uncompressBuf)
	    {
	    blockPt = uncompressBuf;
	    int uncSize = zUncompress(blockBuf, block->size, uncompressBuf, bbi->uncompressBufSize);
	    blockEnd = blockPt + uncSize;
	    }
	else
	    {
	    blockPt = blockBuf;
	    blockEnd = blockPt + block->size;
	    }

	/* Figure out bounds and number of items in block. */
	int blockSize = blockEnd - blockPt;
	struct bbiSummaryOnDisk *dSum;
	int itemSize = sizeof(*dSum);
	assert(blockSize % itemSize == 0);
	int itemCount = blockSize / itemSize;

	/* Read in items and convert to memory list format. */
	int i;
	for (i=0; i<itemCount; ++i)
	    {
	    dSum = (void *)blockPt;
	    blockPt += sizeof(*dSum);
	    if (dSum->chromId == chromId)
		{
		int s = max(dSum->start, start);
		int e = min(dSum->end, end);
		if (s < e)
		    {
		    sum = bbiSummaryFromOnDisk(dSum);
		    slAddHead(&sumList, sum);
		    }
		}
	    }
	assert(blockPt == blockEnd);
	blockBuf += block->size;
        }
    freeMem(mergedBuf);
    }
freeMem(uncompressBuf);
slFreeList(&blockList);
cirTreeFileDetach(&ctf);
slReverse(&sumList);
return sumList;
}