Esempio n. 1
0
int main(int argc, char **argv)
{
    BlockDriverState *bs;
    off_t dev_offset = 0;
    off_t offset = 0;
    bool readonly = false;
    bool disconnect = false;
    const char *bindto = "0.0.0.0";
    int port = NBD_DEFAULT_PORT;
    struct sockaddr_in addr;
    socklen_t addr_len = sizeof(addr);
    off_t fd_size;
    char *device = NULL;
    char *socket = NULL;
    char sockpath[128];
    const char *sopt = "hVb:o:p:rsnP:c:dvk:e:t";
    struct option lopt[] = {
        { "help", 0, NULL, 'h' },
        { "version", 0, NULL, 'V' },
        { "bind", 1, NULL, 'b' },
        { "port", 1, NULL, 'p' },
        { "socket", 1, NULL, 'k' },
        { "offset", 1, NULL, 'o' },
        { "read-only", 0, NULL, 'r' },
        { "partition", 1, NULL, 'P' },
        { "connect", 1, NULL, 'c' },
        { "disconnect", 0, NULL, 'd' },
        { "snapshot", 0, NULL, 's' },
        { "nocache", 0, NULL, 'n' },
        { "shared", 1, NULL, 'e' },
        { "persistent", 0, NULL, 't' },
        { "verbose", 0, NULL, 'v' },
        { NULL, 0, NULL, 0 }
    };
    int ch;
    int opt_ind = 0;
    int li;
    char *end;
    int flags = BDRV_O_RDWR;
    int partition = -1;
    int ret;
    int shared = 1;
    uint8_t *data;
    fd_set fds;
    int *sharing_fds;
    int fd;
    int i;
    int nb_fds = 0;
    int max_fd;
    int persistent = 0;
    uint32_t nbdflags;

    while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
        switch (ch) {
        case 's':
            flags |= BDRV_O_SNAPSHOT;
            break;
        case 'n':
            flags |= BDRV_O_NOCACHE;
            break;
        case 'b':
            bindto = optarg;
            break;
        case 'p':
            li = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid port `%s'", optarg);
            }
            if (li < 1 || li > 65535) {
                errx(EXIT_FAILURE, "Port out of range `%s'", optarg);
            }
            port = (uint16_t)li;
            break;
        case 'o':
                dev_offset = strtoll (optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid offset `%s'", optarg);
            }
            if (dev_offset < 0) {
                errx(EXIT_FAILURE, "Offset must be positive `%s'", optarg);
            }
            break;
        case 'r':
            readonly = true;
            flags &= ~BDRV_O_RDWR;
            break;
        case 'P':
            partition = strtol(optarg, &end, 0);
            if (*end)
                errx(EXIT_FAILURE, "Invalid partition `%s'", optarg);
            if (partition < 1 || partition > 8)
                errx(EXIT_FAILURE, "Invalid partition %d", partition);
            break;
        case 'k':
            socket = optarg;
            if (socket[0] != '/')
                errx(EXIT_FAILURE, "socket path must be absolute\n");
            break;
        case 'd':
            disconnect = true;
            break;
        case 'c':
            device = optarg;
            break;
        case 'e':
            shared = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid shared device number '%s'", optarg);
            }
            if (shared < 1) {
                errx(EXIT_FAILURE, "Shared device number must be greater than 0\n");
            }
            break;
	case 't':
	    persistent = 1;
	    break;
        case 'v':
            verbose = 1;
            break;
        case 'V':
            version(argv[0]);
            exit(0);
            break;
        case 'h':
            usage(argv[0]);
            exit(0);
            break;
        case '?':
            errx(EXIT_FAILURE, "Try `%s --help' for more information.",
                 argv[0]);
        }
    }

    if ((argc - optind) != 1) {
        errx(EXIT_FAILURE, "Invalid number of argument.\n"
             "Try `%s --help' for more information.",
             argv[0]);
    }

    if (disconnect) {
        fd = open(argv[optind], O_RDWR);
        if (fd == -1)
            err(EXIT_FAILURE, "Cannot open %s", argv[optind]);

        nbd_disconnect(fd);

        close(fd);

        printf("%s disconnected\n", argv[optind]);

	return 0;
    }

    bdrv_init();

    bs = bdrv_new("hda");
    if (bs == NULL)
        return 1;

    if ((ret = bdrv_open(bs, argv[optind], flags, NULL)) < 0) {
        errno = -ret;
        err(EXIT_FAILURE, "Failed to bdrv_open '%s'", argv[optind]);
    }

    fd_size = bs->total_sectors * 512;

    if (partition != -1 &&
        find_partition(bs, partition, &dev_offset, &fd_size))
        err(EXIT_FAILURE, "Could not find partition %d", partition);

    if (device) {
        pid_t pid;
        int sock;

        /* want to fail before daemonizing */
        if (access(device, R_OK|W_OK) == -1) {
            err(EXIT_FAILURE, "Could not access '%s'", device);
        }

        if (!verbose) {
            /* detach client and server */
            if (daemon(0, 0) == -1) {
                err(EXIT_FAILURE, "Failed to daemonize");
            }
        }

        if (socket == NULL) {
            snprintf(sockpath, sizeof(sockpath), SOCKET_PATH,
                     basename(device));
            socket = sockpath;
        }

        pid = fork();
        if (pid < 0)
            return 1;
        if (pid != 0) {
            off_t size;
            size_t blocksize;

            ret = 0;
            bdrv_close(bs);

            do {
                sock = unix_socket_outgoing(socket);
                if (sock == -1) {
                    if (errno != ENOENT && errno != ECONNREFUSED) {
                        ret = 1;
                        goto out;
                    }
                    sleep(1);	/* wait children */
                }
            } while (sock == -1);

            fd = open(device, O_RDWR);
            if (fd == -1) {
                ret = 1;
                goto out;
            }

            ret = nbd_receive_negotiate(sock, NULL, &nbdflags,
					&size, &blocksize);
            if (ret == -1) {
                ret = 1;
                goto out;
            }

            ret = nbd_init(fd, sock, size, blocksize);
            if (ret == -1) {
                ret = 1;
                goto out;
            }

            printf("NBD device %s is now connected to file %s\n",
                    device, argv[optind]);

	    /* update partition table */

            show_parts(device);

            ret = nbd_client(fd);
            if (ret) {
                ret = 1;
            }
            close(fd);
 out:
            kill(pid, SIGTERM);
            unlink(socket);

            return ret;
        }
        /* children */
    }

    sharing_fds = qemu_malloc((shared + 1) * sizeof(int));

    if (socket) {
        sharing_fds[0] = unix_socket_incoming(socket);
    } else {
        sharing_fds[0] = tcp_socket_incoming(bindto, port);
    }

    if (sharing_fds[0] == -1)
        return 1;
    max_fd = sharing_fds[0];
    nb_fds++;

    data = qemu_blockalign(bs, NBD_BUFFER_SIZE);
    if (data == NULL)
        errx(EXIT_FAILURE, "Cannot allocate data buffer");

    do {

        FD_ZERO(&fds);
        for (i = 0; i < nb_fds; i++)
            FD_SET(sharing_fds[i], &fds);

        ret = select(max_fd + 1, &fds, NULL, NULL, NULL);
        if (ret == -1)
            break;

        if (FD_ISSET(sharing_fds[0], &fds))
            ret--;
        for (i = 1; i < nb_fds && ret; i++) {
            if (FD_ISSET(sharing_fds[i], &fds)) {
                if (nbd_trip(bs, sharing_fds[i], fd_size, dev_offset,
                    &offset, readonly, data, NBD_BUFFER_SIZE) != 0) {
                    close(sharing_fds[i]);
                    nb_fds--;
                    sharing_fds[i] = sharing_fds[nb_fds];
                    i--;
                }
                ret--;
            }
        }
        /* new connection ? */
        if (FD_ISSET(sharing_fds[0], &fds)) {
            if (nb_fds < shared + 1) {
                sharing_fds[nb_fds] = accept(sharing_fds[0],
                                             (struct sockaddr *)&addr,
                                             &addr_len);
                if (sharing_fds[nb_fds] != -1 &&
                    nbd_negotiate(sharing_fds[nb_fds], fd_size) != -1) {
                        if (sharing_fds[nb_fds] > max_fd)
                            max_fd = sharing_fds[nb_fds];
                        nb_fds++;
                }
            }
        }
    } while (persistent || nb_fds > 1);
    qemu_vfree(data);

    close(sharing_fds[0]);
    bdrv_close(bs);
    qemu_free(sharing_fds);
    if (socket)
        unlink(socket);

    return 0;
}
Esempio n. 2
0
int initNbd(char* filename)
{
    BlockDriverState *bs;
    off_t dev_offset = 0;
    uint32_t nbdflags = 0;
    bool disconnect = false;
    const char *bindto = "0.0.0.0";
    char *device = NULL;
    int port = NBD_DEFAULT_PORT;
    off_t fd_size;
    const char *sopt = "hVb:o:p:rsnP:c:dvk:e:t";
    struct option lopt[] = {
        { "help", 0, NULL, 'h' },
        { "version", 0, NULL, 'V' },
        { "bind", 1, NULL, 'b' },
        { "port", 1, NULL, 'p' },
        { "socket", 1, NULL, 'k' },
        { "offset", 1, NULL, 'o' },
        { "read-only", 0, NULL, 'r' },
        { "partition", 1, NULL, 'P' },
        { "connect", 1, NULL, 'c' },
        { "disconnect", 0, NULL, 'd' },
        { "snapshot", 0, NULL, 's' },
        { "nocache", 0, NULL, 'n' },
        { "shared", 1, NULL, 'e' },
        { "persistent", 0, NULL, 't' },
        { "verbose", 0, NULL, 'v' },
        { NULL, 0, NULL, 0 }
    };
    int ch;
    int opt_ind = 0;
    int li;
    char *end;
    int flags = BDRV_O_RDWR;
    int partition = -1;
    int ret;
    int fd;
    int persistent = 0;
    pthread_t client_thread;

    /* The client thread uses SIGTERM to interrupt the server.  A signal
     * handler ensures that "qemu-nbd -v -c" exits with a nice status code.
     */
    struct sigaction sa_sigterm;
    memset(&sa_sigterm, 0, sizeof(sa_sigterm));
    sa_sigterm.sa_handler = termsig_handler;
    sigaction(SIGTERM, &sa_sigterm, NULL);

//    while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
//        switch (ch) {
//        case 's':
//            flags |= BDRV_O_SNAPSHOT;
//            break;
//        case 'n':
//            flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
//            break;
//        case 'b':
//            bindto = optarg;
//            break;
//        case 'p':
//            li = strtol(optarg, &end, 0);
//            if (*end) {
//                errx(EXIT_FAILURE, "Invalid port `%s'", optarg);
//            }
//            if (li < 1 || li > 65535) {
//                errx(EXIT_FAILURE, "Port out of range `%s'", optarg);
//            }
//            port = (uint16_t)li;
//            break;
//        case 'o':
//                dev_offset = strtoll (optarg, &end, 0);
//            if (*end) {
//                errx(EXIT_FAILURE, "Invalid offset `%s'", optarg);
//            }
//            if (dev_offset < 0) {
//                errx(EXIT_FAILURE, "Offset must be positive `%s'", optarg);
//            }
//            break;
//        case 'r':
//            nbdflags |= NBD_FLAG_READ_ONLY;
//            flags &= ~BDRV_O_RDWR;
//            break;
//        case 'P':
//            partition = strtol(optarg, &end, 0);
//            if (*end)
//                errx(EXIT_FAILURE, "Invalid partition `%s'", optarg);
//            if (partition < 1 || partition > 8)
//                errx(EXIT_FAILURE, "Invalid partition %d", partition);
//            break;
//        case 'k':
//            sockpath = optarg;
//            if (sockpath[0] != '/')
//                errx(EXIT_FAILURE, "socket path must be absolute\n");
//            break;
//        case 'd':
//            disconnect = true;
//            break;
//        case 'c':
//            device = optarg;
//            break;
//        case 'e':
//            shared = strtol(optarg, &end, 0);
//            if (*end) {
//                errx(EXIT_FAILURE, "Invalid shared device number '%s'", optarg);
//            }
//            if (shared < 1) {
//                errx(EXIT_FAILURE, "Shared device number must be greater than 0\n");
//            }
//            break;
//	case 't':
//	    persistent = 1;
//	    break;
//        case 'v':
//            verbose = 1;
//            break;
//        case 'V':
//            version(argv[0]);
//            exit(0);
//            break;
//        case 'h':
//            usage(argv[0]);
//            exit(0);
//            break;
//        case '?':
//            errx(EXIT_FAILURE, "Try `%s --help' for more information.",
//                 argv[0]);
//        }
//    }

//    if ((argc - optind) != 1) {
//        errx(EXIT_FAILURE, "Invalid number of argument.\n"
//             "Try `%s --help' for more information.",
//             argv[0]);
//    }


    /*
       Start a daemon!
       Use client thread to start daemon and write errors;
       Use parent thread to wait for and write error messages.
    */


//    if (device && !verbose) {
//        int stderr_fd[2];
//        pid_t pid;
//        int ret;
//
//        //Setting up Pipe, close after succeeded.
//        if (qemu_pipe(stderr_fd) < 0) {
//            err(EXIT_FAILURE, "Error setting up communication pipe");
//        }
//
//        /* Now daemonize, but keep a communication channel open to
//         * print errors and exit with the proper status code.
//         */
//        //Fork returns 0 for child process and the pid of child process for the parent process
//        pid = fork();
//        if (pid == 0) {
//            close(stderr_fd[0]);
//            ret = qemu_daemon(1, 0);
//
//            /* Temporarily redirect stderr to the parent's pipe...  */
//            dup2(stderr_fd[1], STDERR_FILENO);
//            if (ret < 0) {
//                err(EXIT_FAILURE, "Failed to daemonize");
//            }
//
//            /* ... close the descriptor we inherited and go on.  */
//            close(stderr_fd[1]);
//        } else {
//            bool errors = false;
//            char *buf;
//
//            /* In the parent.  Print error messages from the child until
//             * it closes the pipe.
//             */
//            close(stderr_fd[1]);
//            buf = g_malloc(1024);
//            while ((ret = read(stderr_fd[0], buf, 1024)) > 0) {
//                errors = true;
//                ret = qemu_write_full(STDERR_FILENO, buf, ret);
//                if (ret < 0) {
//                    exit(EXIT_FAILURE);
//                }
//            }
//            if (ret < 0) {
//                err(EXIT_FAILURE, "Cannot read from daemon");
//            }
//
//            /* Usually the daemon should not print any message.
//             * Exit with zero status in that case.
//             */
//            exit(errors);
//        }
//    }
//
//    //Set sock path... But what is sock path???
//    if (device != NULL && sockpath == NULL) {
//        sockpath = g_malloc(128);
//        snprintf(sockpath, 128, SOCKET_PATH, basename(device));
//    }

    //Init a block device!
    bdrv_init();
    atexit(bdrv_close_all);

    //Malloc a new block device state
    bs = bdrv_new("hda");
    srcpath = filename;
    if ((ret = bdrv_open(bs, srcpath, flags, NULL)) < 0) {
        errno = -ret;
        err(EXIT_FAILURE, "Failed to bdrv_open '%s'", srcpath);
    }

    fd_size = bdrv_getlength(bs);

    if (partition != -1) {
        ret = find_partition(bs, partition, &dev_offset, &fd_size);
        if (ret < 0) {
            errno = -ret;
            err(EXIT_FAILURE, "Could not find partition %d", partition);
        }
    }

    exp = nbd_export_new(bs, dev_offset, fd_size, nbdflags);


    if (sockpath) {
        fd = unix_socket_incoming(sockpath);
        fprintf(stderr, "NBD device running on sock path :%s\n", sockpath);
    } else {
        fd = tcp_socket_incoming(bindto, port);
        fprintf(stderr, "NBD device running on port :%i\n", port);
    }

    if (fd < 0) {
        return 1;
    }

    if (device) {
        int ret;

        ret = pthread_create(&client_thread, NULL, nbd_client_thread, device);
        if (ret != 0) {
            errx(EXIT_FAILURE, "Failed to create client thread: %s",
                 strerror(ret));
        }
    } else {
        /* Shut up GCC warnings.  */
        memset(&client_thread, 0, sizeof(client_thread));
    }

    qemu_init_main_loop();
    qemu_set_fd_handler2(fd, nbd_can_accept, nbd_accept, NULL,
                         (void *)(uintptr_t)fd);

    /* now when the initialization is (almost) complete, chdir("/")
     * to free any busy filesystems */
    if (chdir("/") < 0) {
        err(EXIT_FAILURE, "Could not chdir to root directory");
    }


    do {
        main_loop_wait(false);
    } while (!sigterm_reported && (persistent || !nbd_started || nb_fds > 0));

    nbd_export_close(exp);
    if (sockpath) {
        unlink(sockpath);
    }


    if (device) {
        void *ret;
        pthread_join(client_thread, &ret);
        exit(ret != NULL);
    } else {
        exit(EXIT_SUCCESS);
    }
}
Esempio n. 3
0
int main(int argc, char **argv)
{
    BlockBackend *blk;
    BlockDriverState *bs;
    BlockDriver *drv;
    off_t dev_offset = 0;
    uint32_t nbdflags = 0;
    bool disconnect = false;
    const char *bindto = "0.0.0.0";
    char *device = NULL;
    int port = NBD_DEFAULT_PORT;
    off_t fd_size;
    QemuOpts *sn_opts = NULL;
    const char *sn_id_or_name = NULL;
    const char *sopt = "hVb:o:p:rsnP:c:dvk:e:f:tl:";
    struct option lopt[] = {
        { "help", 0, NULL, 'h' },
        { "version", 0, NULL, 'V' },
        { "bind", 1, NULL, 'b' },
        { "port", 1, NULL, 'p' },
        { "socket", 1, NULL, 'k' },
        { "offset", 1, NULL, 'o' },
        { "read-only", 0, NULL, 'r' },
        { "partition", 1, NULL, 'P' },
        { "connect", 1, NULL, 'c' },
        { "disconnect", 0, NULL, 'd' },
        { "snapshot", 0, NULL, 's' },
        { "load-snapshot", 1, NULL, 'l' },
        { "nocache", 0, NULL, 'n' },
        { "cache", 1, NULL, QEMU_NBD_OPT_CACHE },
#ifdef CONFIG_LINUX_AIO
        { "aio", 1, NULL, QEMU_NBD_OPT_AIO },
#endif
        { "discard", 1, NULL, QEMU_NBD_OPT_DISCARD },
        { "detect-zeroes", 1, NULL, QEMU_NBD_OPT_DETECT_ZEROES },
        { "shared", 1, NULL, 'e' },
        { "format", 1, NULL, 'f' },
        { "persistent", 0, NULL, 't' },
        { "verbose", 0, NULL, 'v' },
        { NULL, 0, NULL, 0 }
    };
    int ch;
    int opt_ind = 0;
    int li;
    char *end;
    int flags = BDRV_O_RDWR;
    int partition = -1;
    int ret;
    int fd;
    bool seen_cache = false;
    bool seen_discard = false;
#ifdef CONFIG_LINUX_AIO
    bool seen_aio = false;
#endif
    pthread_t client_thread;
    const char *fmt = NULL;
    Error *local_err = NULL;
    BlockdevDetectZeroesOptions detect_zeroes = BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF;

    /* The client thread uses SIGTERM to interrupt the server.  A signal
     * handler ensures that "qemu-nbd -v -c" exits with a nice status code.
     */
    struct sigaction sa_sigterm;
    memset(&sa_sigterm, 0, sizeof(sa_sigterm));
    sa_sigterm.sa_handler = termsig_handler;
    sigaction(SIGTERM, &sa_sigterm, NULL);
    qemu_init_exec_dir(argv[0]);

    while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
        switch (ch) {
        case 's':
            flags |= BDRV_O_SNAPSHOT;
            break;
        case 'n':
            optarg = (char *) "none";
            /* fallthrough */
        case QEMU_NBD_OPT_CACHE:
            if (seen_cache) {
                errx(EXIT_FAILURE, "-n and --cache can only be specified once");
            }
            seen_cache = true;
            if (bdrv_parse_cache_flags(optarg, &flags) == -1) {
                errx(EXIT_FAILURE, "Invalid cache mode `%s'", optarg);
            }
            break;
#ifdef CONFIG_LINUX_AIO
        case QEMU_NBD_OPT_AIO:
            if (seen_aio) {
                errx(EXIT_FAILURE, "--aio can only be specified once");
            }
            seen_aio = true;
            if (!strcmp(optarg, "native")) {
                flags |= BDRV_O_NATIVE_AIO;
            } else if (!strcmp(optarg, "threads")) {
                /* this is the default */
            } else {
               errx(EXIT_FAILURE, "invalid aio mode `%s'", optarg);
            }
            break;
#endif
        case QEMU_NBD_OPT_DISCARD:
            if (seen_discard) {
                errx(EXIT_FAILURE, "--discard can only be specified once");
            }
            seen_discard = true;
            if (bdrv_parse_discard_flags(optarg, &flags) == -1) {
                errx(EXIT_FAILURE, "Invalid discard mode `%s'", optarg);
            }
            break;
        case QEMU_NBD_OPT_DETECT_ZEROES:
            detect_zeroes =
                qapi_enum_parse(BlockdevDetectZeroesOptions_lookup,
                                optarg,
                                BLOCKDEV_DETECT_ZEROES_OPTIONS_MAX,
                                BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF,
                                &local_err);
            if (local_err) {
                errx(EXIT_FAILURE, "Failed to parse detect_zeroes mode: %s", 
                     error_get_pretty(local_err));
            }
            if (detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP &&
                !(flags & BDRV_O_UNMAP)) {
                errx(EXIT_FAILURE, "setting detect-zeroes to unmap is not allowed "
                                   "without setting discard operation to unmap"); 
            }
            break;
        case 'b':
            bindto = optarg;
            break;
        case 'p':
            li = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid port `%s'", optarg);
            }
            if (li < 1 || li > 65535) {
                errx(EXIT_FAILURE, "Port out of range `%s'", optarg);
            }
            port = (uint16_t)li;
            break;
        case 'o':
                dev_offset = strtoll (optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid offset `%s'", optarg);
            }
            if (dev_offset < 0) {
                errx(EXIT_FAILURE, "Offset must be positive `%s'", optarg);
            }
            break;
        case 'l':
            if (strstart(optarg, SNAPSHOT_OPT_BASE, NULL)) {
                sn_opts = qemu_opts_parse(&internal_snapshot_opts, optarg, 0);
                if (!sn_opts) {
                    errx(EXIT_FAILURE, "Failed in parsing snapshot param `%s'",
                         optarg);
                }
            } else {
                sn_id_or_name = optarg;
            }
            /* fall through */
        case 'r':
            nbdflags |= NBD_FLAG_READ_ONLY;
            flags &= ~BDRV_O_RDWR;
            break;
        case 'P':
            partition = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid partition `%s'", optarg);
            }
            if (partition < 1 || partition > 8) {
                errx(EXIT_FAILURE, "Invalid partition %d", partition);
            }
            break;
        case 'k':
            sockpath = optarg;
            if (sockpath[0] != '/') {
                errx(EXIT_FAILURE, "socket path must be absolute\n");
            }
            break;
        case 'd':
            disconnect = true;
            break;
        case 'c':
            device = optarg;
            break;
        case 'e':
            shared = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid shared device number '%s'", optarg);
            }
            if (shared < 1) {
                errx(EXIT_FAILURE, "Shared device number must be greater than 0\n");
            }
            break;
        case 'f':
            fmt = optarg;
            break;
        case 't':
            persistent = 1;
            break;
        case 'v':
            verbose = 1;
            break;
        case 'V':
            version(argv[0]);
            exit(0);
            break;
        case 'h':
            usage(argv[0]);
            exit(0);
            break;
        case '?':
            errx(EXIT_FAILURE, "Try `%s --help' for more information.",
                 argv[0]);
        }
    }

    if ((argc - optind) != 1) {
        errx(EXIT_FAILURE, "Invalid number of argument.\n"
             "Try `%s --help' for more information.",
             argv[0]);
    }

    if (disconnect) {
        fd = open(argv[optind], O_RDWR);
        if (fd < 0) {
            err(EXIT_FAILURE, "Cannot open %s", argv[optind]);
        }
        nbd_disconnect(fd);

        close(fd);

        printf("%s disconnected\n", argv[optind]);

        return 0;
    }

    if (device && !verbose) {
        int stderr_fd[2];
        pid_t pid;
        int ret;

        if (qemu_pipe(stderr_fd) < 0) {
            err(EXIT_FAILURE, "Error setting up communication pipe");
        }

        /* Now daemonize, but keep a communication channel open to
         * print errors and exit with the proper status code.
         */
        pid = fork();
        if (pid == 0) {
            close(stderr_fd[0]);
            ret = qemu_daemon(1, 0);

            /* Temporarily redirect stderr to the parent's pipe...  */
            dup2(stderr_fd[1], STDERR_FILENO);
            if (ret < 0) {
                err(EXIT_FAILURE, "Failed to daemonize");
            }

            /* ... close the descriptor we inherited and go on.  */
            close(stderr_fd[1]);
        } else {
            bool errors = false;
            char *buf;

            /* In the parent.  Print error messages from the child until
             * it closes the pipe.
             */
            close(stderr_fd[1]);
            buf = g_malloc(1024);
            while ((ret = read(stderr_fd[0], buf, 1024)) > 0) {
                errors = true;
                ret = qemu_write_full(STDERR_FILENO, buf, ret);
                if (ret < 0) {
                    exit(EXIT_FAILURE);
                }
            }
            if (ret < 0) {
                err(EXIT_FAILURE, "Cannot read from daemon");
            }

            /* Usually the daemon should not print any message.
             * Exit with zero status in that case.
             */
            exit(errors);
        }
    }

    if (device != NULL && sockpath == NULL) {
        sockpath = g_malloc(128);
        snprintf(sockpath, 128, SOCKET_PATH, basename(device));
    }

    if (qemu_init_main_loop(&local_err)) {
        error_report("%s", error_get_pretty(local_err));
        error_free(local_err);
        exit(EXIT_FAILURE);
    }
    bdrv_init();
    atexit(bdrv_close_all);

    if (fmt) {
        drv = bdrv_find_format(fmt);
        if (!drv) {
            errx(EXIT_FAILURE, "Unknown file format '%s'", fmt);
        }
    } else {
        drv = NULL;
    }

    blk = blk_new_with_bs("hda", &error_abort);
    bs = blk_bs(blk);

    srcpath = argv[optind];
    ret = bdrv_open(&bs, srcpath, NULL, NULL, flags, drv, &local_err);
    if (ret < 0) {
        errno = -ret;
        err(EXIT_FAILURE, "Failed to bdrv_open '%s': %s", argv[optind],
            error_get_pretty(local_err));
    }

    if (sn_opts) {
        ret = bdrv_snapshot_load_tmp(bs,
                                     qemu_opt_get(sn_opts, SNAPSHOT_OPT_ID),
                                     qemu_opt_get(sn_opts, SNAPSHOT_OPT_NAME),
                                     &local_err);
    } else if (sn_id_or_name) {
        ret = bdrv_snapshot_load_tmp_by_id_or_name(bs, sn_id_or_name,
                                                   &local_err);
    }
    if (ret < 0) {
        errno = -ret;
        err(EXIT_FAILURE,
            "Failed to load snapshot: %s",
            error_get_pretty(local_err));
    }

    bs->detect_zeroes = detect_zeroes;
    fd_size = blk_getlength(blk);

    if (partition != -1) {
        ret = find_partition(blk, partition, &dev_offset, &fd_size);
        if (ret < 0) {
            errno = -ret;
            err(EXIT_FAILURE, "Could not find partition %d", partition);
        }
    }

    exp = nbd_export_new(blk, dev_offset, fd_size, nbdflags, nbd_export_closed);

    if (sockpath) {
        fd = unix_socket_incoming(sockpath);
    } else {
        fd = tcp_socket_incoming(bindto, port);
    }

    if (fd < 0) {
        return 1;
    }

    if (device) {
        int ret;

        ret = pthread_create(&client_thread, NULL, nbd_client_thread, device);
        if (ret != 0) {
            errx(EXIT_FAILURE, "Failed to create client thread: %s",
                 strerror(ret));
        }
    } else {
        /* Shut up GCC warnings.  */
        memset(&client_thread, 0, sizeof(client_thread));
    }

    qemu_set_fd_handler2(fd, nbd_can_accept, nbd_accept, NULL,
                         (void *)(uintptr_t)fd);

    /* now when the initialization is (almost) complete, chdir("/")
     * to free any busy filesystems */
    if (chdir("/") < 0) {
        err(EXIT_FAILURE, "Could not chdir to root directory");
    }

    state = RUNNING;
    do {
        main_loop_wait(false);
        if (state == TERMINATE) {
            state = TERMINATING;
            nbd_export_close(exp);
            nbd_export_put(exp);
            exp = NULL;
        }
    } while (state != TERMINATED);

    blk_unref(blk);
    if (sockpath) {
        unlink(sockpath);
    }

    qemu_opts_del(sn_opts);

    if (device) {
        void *ret;
        pthread_join(client_thread, &ret);
        exit(ret != NULL);
    } else {
        exit(EXIT_SUCCESS);
    }
}
Esempio n. 4
0
int main(int argc, char **argv)
{
    BlockDriverState *bs;
    off_t dev_offset = 0;
    off_t offset = 0;
    uint32_t nbdflags = 0;
    bool disconnect = false;
    const char *bindto = "0.0.0.0";
    int port = NBD_DEFAULT_PORT;
    struct sockaddr_in addr;
    socklen_t addr_len = sizeof(addr);
    off_t fd_size;
    const char *sopt = "hVb:o:p:rsnP:c:dvk:e:t";
    struct option lopt[] = {
        { "help", 0, NULL, 'h' },
        { "version", 0, NULL, 'V' },
        { "bind", 1, NULL, 'b' },
        { "port", 1, NULL, 'p' },
        { "socket", 1, NULL, 'k' },
        { "offset", 1, NULL, 'o' },
        { "read-only", 0, NULL, 'r' },
        { "partition", 1, NULL, 'P' },
        { "connect", 1, NULL, 'c' },
        { "disconnect", 0, NULL, 'd' },
        { "snapshot", 0, NULL, 's' },
        { "nocache", 0, NULL, 'n' },
        { "shared", 1, NULL, 'e' },
        { "persistent", 0, NULL, 't' },
        { "verbose", 0, NULL, 'v' },
        { NULL, 0, NULL, 0 }
    };
    int ch;
    int opt_ind = 0;
    int li;
    char *end;
    int flags = BDRV_O_RDWR;
    int partition = -1;
    int ret;
    int shared = 1;
    uint8_t *data;
    fd_set fds;
    int *sharing_fds;
    int fd;
    int i;
    int nb_fds = 0;
    int max_fd;
    int persistent = 0;
    pthread_t client_thread;

    /* The client thread uses SIGTERM to interrupt the server.  A signal
     * handler ensures that "qemu-nbd -v -c" exits with a nice status code.
     */
    struct sigaction sa_sigterm;
    int sigterm_fd[2];
    if (qemu_pipe(sigterm_fd) == -1) {
        err(EXIT_FAILURE, "Error setting up communication pipe");
    }

    sigterm_wfd = sigterm_fd[1];
    memset(&sa_sigterm, 0, sizeof(sa_sigterm));
    sa_sigterm.sa_handler = termsig_handler;
    sigaction(SIGTERM, &sa_sigterm, NULL);

    while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
        switch (ch) {
        case 's':
            flags |= BDRV_O_SNAPSHOT;
            break;
        case 'n':
            flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
            break;
        case 'b':
            bindto = optarg;
            break;
        case 'p':
            li = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid port `%s'", optarg);
            }
            if (li < 1 || li > 65535) {
                errx(EXIT_FAILURE, "Port out of range `%s'", optarg);
            }
            port = (uint16_t)li;
            break;
        case 'o':
                dev_offset = strtoll (optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid offset `%s'", optarg);
            }
            if (dev_offset < 0) {
                errx(EXIT_FAILURE, "Offset must be positive `%s'", optarg);
            }
            break;
        case 'r':
            nbdflags |= NBD_FLAG_READ_ONLY;
            flags &= ~BDRV_O_RDWR;
            break;
        case 'P':
            partition = strtol(optarg, &end, 0);
            if (*end)
                errx(EXIT_FAILURE, "Invalid partition `%s'", optarg);
            if (partition < 1 || partition > 8)
                errx(EXIT_FAILURE, "Invalid partition %d", partition);
            break;
        case 'k':
            sockpath = optarg;
            if (sockpath[0] != '/')
                errx(EXIT_FAILURE, "socket path must be absolute\n");
            break;
        case 'd':
            disconnect = true;
            break;
        case 'c':
            device = optarg;
            break;
        case 'e':
            shared = strtol(optarg, &end, 0);
            if (*end) {
                errx(EXIT_FAILURE, "Invalid shared device number '%s'", optarg);
            }
            if (shared < 1) {
                errx(EXIT_FAILURE, "Shared device number must be greater than 0\n");
            }
            break;
	case 't':
	    persistent = 1;
	    break;
        case 'v':
            verbose = 1;
            break;
        case 'V':
            version(argv[0]);
            exit(0);
            break;
        case 'h':
            usage(argv[0]);
            exit(0);
            break;
        case '?':
            errx(EXIT_FAILURE, "Try `%s --help' for more information.",
                 argv[0]);
        }
    }

    if ((argc - optind) != 1) {
        errx(EXIT_FAILURE, "Invalid number of argument.\n"
             "Try `%s --help' for more information.",
             argv[0]);
    }

    if (disconnect) {
        fd = open(argv[optind], O_RDWR);
        if (fd == -1)
            err(EXIT_FAILURE, "Cannot open %s", argv[optind]);

        nbd_disconnect(fd);

        close(fd);

        printf("%s disconnected\n", argv[optind]);

	return 0;
    }

    if (device && !verbose) {
        int stderr_fd[2];
        pid_t pid;
        int ret;

        if (qemu_pipe(stderr_fd) == -1) {
            err(EXIT_FAILURE, "Error setting up communication pipe");
        }

        /* Now daemonize, but keep a communication channel open to
         * print errors and exit with the proper status code.
         */
        pid = fork();
        if (pid == 0) {
            close(stderr_fd[0]);
            ret = qemu_daemon(0, 0);

            /* Temporarily redirect stderr to the parent's pipe...  */
            dup2(stderr_fd[1], STDERR_FILENO);
            if (ret == -1) {
                err(EXIT_FAILURE, "Failed to daemonize");
            }

            /* ... close the descriptor we inherited and go on.  */
            close(stderr_fd[1]);
        } else {
            bool errors = false;
            char *buf;

            /* In the parent.  Print error messages from the child until
             * it closes the pipe.
             */
            close(stderr_fd[1]);
            buf = g_malloc(1024);
            while ((ret = read(stderr_fd[0], buf, 1024)) > 0) {
                errors = true;
                ret = qemu_write_full(STDERR_FILENO, buf, ret);
                if (ret == -1) {
                    exit(EXIT_FAILURE);
                }
            }
            if (ret == -1) {
                err(EXIT_FAILURE, "Cannot read from daemon");
            }

            /* Usually the daemon should not print any message.
             * Exit with zero status in that case.
             */
            exit(errors);
        }
    }

    if (device) {
        /* Open before spawning new threads.  In the future, we may
         * drop privileges after opening.
         */
        fd = open(device, O_RDWR);
        if (fd == -1) {
            err(EXIT_FAILURE, "Failed to open %s", device);
        }

        if (sockpath == NULL) {
            sockpath = g_malloc(128);
            snprintf(sockpath, 128, SOCKET_PATH, basename(device));
        }
    }

    bdrv_init();
    atexit(bdrv_close_all);

    bs = bdrv_new("hda");
    srcpath = argv[optind];
    if ((ret = bdrv_open(bs, srcpath, flags, NULL)) < 0) {
        errno = -ret;
        err(EXIT_FAILURE, "Failed to bdrv_open '%s'", argv[optind]);
    }

    fd_size = bs->total_sectors * 512;

    if (partition != -1 &&
        find_partition(bs, partition, &dev_offset, &fd_size)) {
        err(EXIT_FAILURE, "Could not find partition %d", partition);
    }

    sharing_fds = g_malloc((shared + 1) * sizeof(int));

    if (sockpath) {
        sharing_fds[0] = unix_socket_incoming(sockpath);
    } else {
        sharing_fds[0] = tcp_socket_incoming(bindto, port);
    }

    if (sharing_fds[0] == -1)
        return 1;

    if (device) {
        int ret;

        ret = pthread_create(&client_thread, NULL, nbd_client_thread, &fd);
        if (ret != 0) {
            errx(EXIT_FAILURE, "Failed to create client thread: %s",
                 strerror(ret));
        }
    } else {
        /* Shut up GCC warnings.  */
        memset(&client_thread, 0, sizeof(client_thread));
    }

    max_fd = sharing_fds[0];
    nb_fds++;

    data = qemu_blockalign(bs, NBD_BUFFER_SIZE);
    if (data == NULL) {
        errx(EXIT_FAILURE, "Cannot allocate data buffer");
    }

    do {
        FD_ZERO(&fds);
        FD_SET(sigterm_fd[0], &fds);
        for (i = 0; i < nb_fds; i++)
            FD_SET(sharing_fds[i], &fds);

        do {
            ret = select(max_fd + 1, &fds, NULL, NULL, NULL);
        } while (ret == -1 && errno == EINTR);
        if (ret == -1 || FD_ISSET(sigterm_fd[0], &fds)) {
            break;
        }

        if (FD_ISSET(sharing_fds[0], &fds))
            ret--;
        for (i = 1; i < nb_fds && ret; i++) {
            if (FD_ISSET(sharing_fds[i], &fds)) {
                if (nbd_trip(bs, sharing_fds[i], fd_size, dev_offset,
                    &offset, nbdflags, data, NBD_BUFFER_SIZE) != 0) {
                    close(sharing_fds[i]);
                    nb_fds--;
                    sharing_fds[i] = sharing_fds[nb_fds];
                    i--;
                }
                ret--;
            }
        }
        /* new connection ? */
        if (FD_ISSET(sharing_fds[0], &fds)) {
            if (nb_fds < shared + 1) {
                sharing_fds[nb_fds] = accept(sharing_fds[0],
                                             (struct sockaddr *)&addr,
                                             &addr_len);
                if (sharing_fds[nb_fds] != -1 &&
                    nbd_negotiate(sharing_fds[nb_fds], fd_size, nbdflags) != -1) {
                        if (sharing_fds[nb_fds] > max_fd)
                            max_fd = sharing_fds[nb_fds];
                        nb_fds++;
                }
            }
        }
    } while (persistent || nb_fds > 1);
    qemu_vfree(data);

    close(sharing_fds[0]);
    g_free(sharing_fds);
    if (sockpath) {
        unlink(sockpath);
    }

    if (device) {
        void *ret;
        pthread_join(client_thread, &ret);
        exit(ret != NULL);
    } else {
        exit(EXIT_SUCCESS);
    }
}