void SetActiveView::update() {
unsigned char newInstrument = 0;
bool wasInstrumentSelected = instrumentButtons_.getSelectedButton(newInstrument);
panButtons_.update();
instrumentButtons_.update();
stepButtons_.update();
bool isInstrumentSelected = instrumentButtons_.getSelectedButton(newInstrument);
if ((isInstrumentSelected != wasInstrumentSelected) ||
(isInstrumentSelected && (currentInstrumentIndex_ != newInstrument))) {
currentInstrumentIndex_ = isInstrumentSelected ? newInstrument : currentInstrumentIndex_;
currentPanIndex_ = 0;
panButtons_.setSelectedButton(0);
updateConfiguration();
return;
}
bool shift = LEDsAndButtonsHWWrapper::isButtonDown(SekvojModulePool::buttonMap_->getFunctionButtonIndex());
if (shift) {
//We take the highest currently pressed pan
//to increase number of active steps up to that pan
for (unsigned char pan = 0; pan < 4; pan++) {
if (LEDsAndButtonsHWWrapper::isButtonDown(SekvojModulePool::buttonMap_getSubStepButtonIndex(pan))) {
setActiveUpTo(((pan + 1) * 16) - 1, isInstrumentSelected);
updateConfiguration();
break;
}
}
//Change back selected pan since in shift mode changes are not allowed
panButtons_.setSelectedButton(currentPanIndex_);
} else {
unsigned char newPan = 0;
if (panButtons_.getSelectedButton(newPan) && currentPanIndex_ != newPan) {
currentPanIndex_ = newPan;
updateConfiguration();
return;
}
}
for (unsigned char i = 0; i < 16; i++) {
// Check whether the status of the step button has been changed
bool lastState = GETBIT(currentStatuses_, i);
bool newState = LEDsAndButtonsHWWrapper::hw_->getButtonState(SekvojModulePool::buttonMap_->getStepButtonIndex(i));
bool stateChanged = newState != lastState;
setBit(currentStatuses_, i, newState);
unsigned char pressedStep = (currentPanIndex_ * 16) + i;
if (stateChanged) {
//Update
setActiveUpTo(pressedStep, isInstrumentSelected);
updateConfiguration();
}
}
}
DigitalPin::DigitalPin(Port port,
uint8_t pinNo,
Direction direction,
Speed speed,
OutputType outputType,
PullSetting pullSetting
) : pinNo(pinNo), config() {
config.port = port;
config.pins = getPinByNo(pinNo);
if(direction == IN) {
config.mode = Modes::DIGITAL_IN;
} else if (direction == OUT){
config.mode = Modes::DIGITAL_OUT;
} else {
Reporter::reportError("DigitalPin()","bad direction");
}
config.speed = speed;
config.outputType = outputType;
config.pullSetting = pullSetting;
enablePeriphClock(port);
updateConfiguration();
clear(); // initialize output in off mode
}
static void
atConfigChangedCallback(SCDynamicStoreRef store, CFArrayRef changedKeys, void *arg)
{
boolean_t configChanged;
int newState;
configChanged = updateConfiguration(&newState);
if (configChanged && (execCommand == 0)) {
// if the configuration has changed and we're not already transitioning
if (newState > 0) {
if (curState > 0) {
// already running, restart [with new configuration]
stopAppleTalk(NULL, (void *)newState);
} else {
startAppleTalk(NULL, (void *)newState);
}
} else {
if (curState > 0) {
stopAppleTalk(NULL, (void *)newState);
}
}
}
curState = newState;
return;
}
void glueDrawable(Display *dpy, GLXDrawable drawable)
{
if (hotkeyPressed && engine == NULL) {
hotkeyPressed = 0;
/* reload configuration in case it changed */
updateConfiguration();
Window root;
unsigned int width, height, unused;
XGetGeometry(dpy, drawable, &root, (int *)&unused, (int *)&unused, &width, &height, &unused, &unused);
unsigned long size[2] = { width, height };
/* create the main engine */
engine = yukonEngineCreate(yukonGlobal.output, yukonGlobal.scale, size);
if (engine) {
logMessage(4, "Yukon engine is active now\n");
} else {
logMessage(4, "Failed to create the yukon engine\n");
}
}
if (engine)
yukonEngineCapture(engine);
}
int NavigationView::qt_metacall(QMetaObject::Call _c, int _id, void **_a)
{
_id = QGraphicsView::qt_metacall(_c, _id, _a);
if (_id < 0)
return _id;
if (_c == QMetaObject::InvokeMetaMethod) {
switch (_id) {
case 0: mouseAtGeoPos((*reinterpret_cast< const QPointF(*)>(_a[1]))); break;
case 1: newPointAdded((*reinterpret_cast< const QPointF(*)>(_a[1]))); break;
case 2: newLineAdded((*reinterpret_cast< QPointF(*)>(_a[1])),(*reinterpret_cast< QPointF(*)>(_a[2]))); break;
case 3: newLandmarkAdded((*reinterpret_cast< const QPointF(*)>(_a[1]))); break;
case 4: setRoverPosAndHeading((*reinterpret_cast< const QPointF(*)>(_a[1])),(*reinterpret_cast< qreal(*)>(_a[2]))); break;
case 5: setRoverPosition((*reinterpret_cast< const QPointF(*)>(_a[1]))); break;
case 6: setRoverHeading((*reinterpret_cast< qreal(*)>(_a[1]))); break;
case 7: updateConfiguration(); break;
case 8: plotLineForSelected(); break;
case 9: plotLineForPoints((*reinterpret_cast< QPointF(*)>(_a[1])),(*reinterpret_cast< QPointF(*)>(_a[2]))); break;
case 10: plotLineIntersection(); break;
case 11: selectPoint((*reinterpret_cast< QPointF(*)>(_a[1])),(*reinterpret_cast< bool(*)>(_a[2]))); break;
case 12: selectPoint((*reinterpret_cast< QPointF(*)>(_a[1]))); break;
case 13: clearSelectedPoints(); break;
case 14: selectLines((*reinterpret_cast< QList<QPair<QPointF,QPointF> >(*)>(_a[1]))); break;
case 15: clearSelectedLines(); break;
case 16: deleteSelectedPoints(); break;
case 17: deleteSelectedLines(); break;
default: ;
}
_id -= 18;
}
return _id;
}
Configuration& Configuration::operator = (const Configuration& info)
{
m_hspPath = info.m_hspPath;
m_hspCommonPath = info.m_hspCommonPath;
m_compilerPath = info.m_compilerPath;
m_editorTabWidth = info.m_editorTabWidth;
m_editorLineNumberVisibled = info.m_editorLineNumberVisibled;
m_editorLineNumberFontName = info.m_editorLineNumberFontName;
m_editorLineNumberFontSize = info.m_editorLineNumberFontSize;
m_editorFontName = info.m_editorFontName;
m_editorFontSize = info.m_editorFontSize;
for(int i = 0; i < ColorMetricsNum; i++) {
m_colorMetrics[i] = info.m_colorMetrics[i];
}
m_keyAssignInfo = info.m_keyAssignInfo;
m_toolbarInfo = info.m_toolbarInfo;
m_tools = info.m_tools;
emit updateConfiguration(this);
return *this;
}
MiniWeb::MiniWeb(QWidget *parent)
: KWebView(parent)
{
load(QUrl("about:blank"));
connect(page(), SIGNAL(linkHovered(QString, QString, QString)),
this, SIGNAL(statusBarMessage(QString)));
updateConfiguration();
m_vi_mode = true;
m_loading = false;
connect(this, SIGNAL(loadStarted()),
this, SLOT(setLoading()));
connect(this, SIGNAL(loadFinished(bool)),
this, SLOT(setNotLoading(bool)));
connect(this, SIGNAL(loadFinished(bool)),
this, SLOT(setStatusLoaded(bool)));
connect(this, SIGNAL(urlChanged(QUrl)),
this, SLOT(setPageChanged()));
connect(this, SIGNAL(linkMiddleOrCtrlClicked(KUrl)),
this, SLOT(openInNewWindow(KUrl)));
connect(page(), SIGNAL(downloadRequested(QNetworkRequest)),
this, SLOT(download(QNetworkRequest)));
}
Renderer::Renderer(Context *context, Conventions conventions, bool exactColorRounding) : VertexProcessor(context), PixelProcessor(context), SetupProcessor(context), context(context), viewport()
{
setGlobalRenderingSettings(conventions, exactColorRounding);
setRenderTarget(0, nullptr);
clipper = new Clipper;
blitter = new Blitter;
#if PERF_HUD
resetTimers();
#endif
for(int i = 0; i < 16; i++)
{
vertexTask[i] = nullptr;
worker[i] = nullptr;
resume[i] = nullptr;
suspend[i] = nullptr;
}
threadsAwake = 0;
resumeApp = new Event();
currentDraw = 0;
nextDraw = 0;
qHead = 0;
qSize = 0;
for(int i = 0; i < 16; i++)
{
triangleBatch[i] = nullptr;
primitiveBatch[i] = nullptr;
}
for(int draw = 0; draw < DRAW_COUNT; draw++)
{
drawCall[draw] = new DrawCall();
drawList[draw] = drawCall[draw];
}
for(int unit = 0; unit < 16; unit++)
{
primitiveProgress[unit].init();
}
for(int cluster = 0; cluster < 16; cluster++)
{
pixelProgress[cluster].init();
}
clipFlags = 0;
swiftConfig = new SwiftConfig(disableServer);
updateConfiguration(true);
sync = new Resource(0);
}
void CBasicAuthentication::onConfigurationUpdated(boost::shared_ptr<database::entities::CConfiguration> newConfiguration)
{
if (newConfiguration && boost::iequals(newConfiguration->Section(), m_configurationSection) && boost::iequals(newConfiguration->Name(), m_configurationName))
{
YADOMS_LOG(information) << "Authentication settings have changes, reload them";
updateConfiguration();
}
}
void ViewportConfiguration::setContentsSize(const IntSize& contentSize)
{
if (m_contentSize == contentSize)
return;
m_contentSize = contentSize;
updateConfiguration();
}
void ViewportConfiguration::setMinimumLayoutSize(const FloatSize& minimumLayoutSize)
{
if (m_minimumLayoutSize == minimumLayoutSize)
return;
m_minimumLayoutSize = minimumLayoutSize;
updateConfiguration();
}
void ViewportConfiguration::setViewportArguments(const ViewportArguments& viewportArguments)
{
if (m_viewportArguments == viewportArguments)
return;
m_viewportArguments = viewportArguments;
updateConfiguration();
}
bool ViewportConfiguration::setCanIgnoreScalingConstraints(bool canIgnoreScalingConstraints)
{
if (canIgnoreScalingConstraints == m_canIgnoreScalingConstraints)
return false;
m_canIgnoreScalingConstraints = canIgnoreScalingConstraints;
updateConfiguration();
return true;
}
bool ViewportConfiguration::setMinimumLayoutSize(const FloatSize& minimumLayoutSize)
{
if (m_minimumLayoutSize == minimumLayoutSize)
return false;
m_minimumLayoutSize = minimumLayoutSize;
updateConfiguration();
return true;
}
static void sigHandle (int sig, siginfo_t *siginfo, void *context)
{
logger.info("Handled signal: %d",sig);
updateConfiguration();
server.shutdown();
heater.shutdown();
sensor.shutdown();
state.run = FALSE;
}
void KJotsMain::configure()
{
if( confdiag )
return;
confdiag = new ConfDialog;
connect( confdiag, SIGNAL(confHide()), this, SLOT(configureHide()) );
connect( confdiag, SIGNAL(commitChanges()), this, SLOT(updateConfiguration()) );
confdiag->show();
}
bool ViewportConfiguration::setContentsSize(const IntSize& contentSize)
{
if (m_contentSize == contentSize)
return false;
m_contentSize = contentSize;
updateConfiguration();
return true;
}
bool ViewportConfiguration::setViewportArguments(const ViewportArguments& viewportArguments)
{
if (m_viewportArguments == viewportArguments)
return false;
m_viewportArguments = viewportArguments;
updateConfiguration();
return true;
}
void SetActiveView::init(unsigned char currentInstrumentIndex, unsigned char currentPanIndex) {
currentInstrumentIndex_ = currentInstrumentIndex;
currentPanIndex_ = currentPanIndex;
panButtons_ .init(SekvojModulePool::buttonMap_getSubStepButtonArray(), 4);
instrumentButtons_.init(SekvojModulePool::buttonMap_getInstrumentButtonArray(), 6);
instrumentButtons_.setSelectedButton(currentInstrumentIndex);
stepButtons_.init(SekvojModulePool::buttonMap_->getStepButtonArray(), 16);
updateConfiguration();
}
void ViewportConfiguration::setDefaultConfiguration(const ViewportConfiguration::Parameters& defaultConfiguration)
{
ASSERT(!constraintsAreAllRelative(m_configuration));
ASSERT(!defaultConfiguration.initialScaleIsSet || defaultConfiguration.initialScale > 0);
ASSERT(defaultConfiguration.minimumScale > 0);
ASSERT(defaultConfiguration.maximumScale >= defaultConfiguration.minimumScale);
m_defaultConfiguration = defaultConfiguration;
updateConfiguration();
}
ViewportConfiguration::ViewportConfiguration()
: m_minimumLayoutSize(1024, 768)
, m_canIgnoreScalingConstraints(false)
, m_forceAlwaysUserScalable(false)
{
// Setup a reasonable default configuration to avoid computing infinite scale/sizes.
// Those are the original iPhone configuration.
m_defaultConfiguration = ViewportConfiguration::webpageParameters();
updateConfiguration();
}
NetctlHelper::NetctlHelper(QObject *parent, QVariantMap args)
: QObject(parent),
configPath(args[QString("config")].toString()),
debug(args[QString("debug")].toBool()),
session(args[QString("session")].toBool()),
system(args[QString("system")].toBool())
{
updateConfiguration();
if (!args[QString("nodaemon")].toBool()) daemon(0, 0);
}
__private_extern__
void
prime_PreferencesMonitor()
{
SCLog(_verbose, LOG_DEBUG, CFSTR("prime() called"));
/* load the initial configuration from the database */
updateConfiguration(prefs, kSCPreferencesNotificationApply, (void *)store);
return;
}
CBasicAuthentication::CBasicAuthentication(boost::shared_ptr<dataAccessLayer::IConfigurationManager> configurationManager, bool skipPasswordCheck)
:m_configurationManager(configurationManager), m_skipPasswordCheck(skipPasswordCheck)
{
if (!m_skipPasswordCheck)
{
//read configuration from database
updateConfiguration();
m_observer = notification::CHelpers::subscribeBasicObserver<database::entities::CConfiguration>(boost::bind(&CBasicAuthentication::onConfigurationUpdated, this, _1));
}
}
void UIActionPool::prepare()
{
/* Prepare pool: */
preparePool();
/* Prepare connections: */
prepareConnections();
/* Update configuration: */
updateConfiguration();
/* Update shortcuts: */
updateShortcuts();
}
void Netctl::readConfiguration()
{
if (debug) qDebug() << "[DE]" << "[readConfiguration]";
// default configuration
QMap<QString, QString> rawConfig;
rawConfig[QString("CMD")] = QString("/usr/bin/netctl");
rawConfig[QString("EXTIP")] = QString("false");
rawConfig[QString("EXTIPCMD")] = QString("wget -qO- http://ifconfig.me/ip");
rawConfig[QString("IPCMD")] = QString("/usr/bin/ip");
rawConfig[QString("NETDIR")] = QString("/sys/class/net/");
rawConfig[QString("NETCTLAUTOCMD")] = QString("/usr/bin/netctl-auto");
QString fileName = KGlobal::dirs()->findResource("config", "netctl.conf");
if (debug) qDebug() << "[DE]" << "[readConfiguration]" << ":" << "Configuration file" << fileName;
QFile configFile(fileName);
if (!configFile.open(QIODevice::ReadOnly)) {
configuration = updateConfiguration(rawConfig);
return;
}
QString fileStr;
QStringList value;
while (true) {
fileStr = QString(configFile.readLine()).trimmed();
if ((fileStr.isEmpty()) && (!configFile.atEnd())) continue;
if ((fileStr[0] == QChar('#')) && (!configFile.atEnd())) continue;
if ((fileStr[0] == QChar(';')) && (!configFile.atEnd())) continue;
if (fileStr.contains(QChar('='))) {
value.clear();
for (int i=1; i<fileStr.split(QChar('=')).count(); i++)
value.append(fileStr.split(QChar('='))[i]);
rawConfig[fileStr.split(QChar('='))[0]] = value.join(QChar('='));
}
if (configFile.atEnd()) break;
}
configFile.close();
configuration = updateConfiguration(rawConfig);
return;
}
CDebugger::CDebugger(QObject *parent, QLocalSocket* socket)
: QObject(parent)
, m_clientConnection(socket)
, m_targetItem(NULL)
{
connect(m_clientConnection, SIGNAL(readyRead()), this, SLOT(recvCommand()));
connect(m_clientConnection, SIGNAL(destroyed()), this, SLOT(deleteLater()));
// 設定の変更通史の登録と設定からの初期化処理
connect(theConf, SIGNAL(updateConfiguration(const Configuration*)),
this, SLOT(updateConfiguration(const Configuration*)));
updateConfiguration(theConf);
}
void ConfigureDialog::onButtonsClicked( QAbstractButton *button )
{
QDialogButtonBox::ButtonRole br = buttons->buttonRole( button );
if ( br == QDialogButtonBox::AcceptRole ) { // OK
savePageConfigurations();
accept();
} else if ( br == QDialogButtonBox::RejectRole ) { // Cancel
reject();
} else if ( br == QDialogButtonBox::ApplyRole ) { // Apply
savePageConfigurations();
emit updateConfiguration();
}
}
void ConfigurationManager::loadConfiguration()
{
if (storage_) {
if (state_->isSDKPropertiesUpdated()) {
KAA_LOG_INFO("Ignore loading configuration from storage: configuration version updated");
storage_->clearConfiguration();
} else {
auto data = storage_->loadConfiguration();
if (!data.empty()) {
updateConfiguration(data.data(), data.size());
isConfigurationLoaded_ = true;
KAA_LOG_INFO("Loaded configuration from storage");
}
}
}
if (!isConfigurationLoaded_) {
const Botan::SecureVector<std::uint8_t>& config = getDefaultConfigData();
updateConfiguration(config.begin(), config.size());
isConfigurationLoaded_ = true;
KAA_LOG_INFO("Loaded default configuration");
}
}
void connected_ap_info(apinfo_adv_t *ap_info, char *key, int key_len) //callback, return connected AP info
{
/*Update fastlink record*/
int result, result1;
result = memcmp(&(device_info->conf.fastLinkConf.ap_info), ap_info, sizeof(ApList_adv_t));
result1 = memcmp(&(device_info->conf.fastLinkConf.key), key, key_len);
if(device_info->conf.fastLinkConf.availableRecord == 0||result||result1){
device_info->conf.fastLinkConf.availableRecord = 1;
memcpy(&(device_info->conf.fastLinkConf.ap_info), ap_info, sizeof(ApList_adv_t));
memcpy(device_info->conf.fastLinkConf.key, key, key_len);
device_info->conf.fastLinkConf.key_len = key_len;
updateConfiguration(device_info);
}
}
