/*********************************************************************
* Function: void ConsolePut(BYTE c)
*
* PreCondition: none
*
* Input: c - character to be printed
*
* Output: none
*
* Side Effects: c is printed to the console
*
* Overview: This function will print the inputed character
*
* Note: Do not power down the microcontroller until
* the transmission is complete or the last
* transmission of the string can be corrupted.
********************************************************************/
void ConsolePut(BYTE c)
{
#if defined(ENABLE_CONSOLE)
usb_putchar(c);
USBCDCWait();
#endif
}
void WriteUART2(unsigned int data)
{
#ifndef USB_INTERRUPT
USBDeviceTasks(); // Interrupt or polling method. If using polling, must call
#endif
USBProcessIO();
usb_putchar((unsigned char)data);
}
/*
* write a single character to output queue, and enable Tx interrupts.
*/
int usb_putchar( char c, FILE *stream )
{
if( c == '\n' )
usb_putchar( '\r', stream );
while( (uint8_t) (usb_tx_head - usb_tx_tail) == USB_OUTBUF_LEN )
wdt_reset( );
usb_tx_buf[usb_tx_head++ % USB_OUTBUF_LEN] = c;
UCSR1B |= (1 << UDRIE1 );
return 0;
}
// USB/USART combined put char (handles printf)
void _user_putc(unsigned char c)
{
#ifdef USE_USART
putc1USART(c);
while(Busy1USART());
#endif
#if defined(DEBUG_USART2_TX) || defined(UART2_DATA_OUTPUT)
Write2USART(c);
while(Busy2USART());
#endif
usb_putchar(c);
}
result_e usb_cmd(uint8_t * req, uint8_t * ack, size_t ack_size, uint16_t delay)
{
result_e res;
uint8_t timer_id;
uint8_t idx;
if (!usb_on)
return RESULT_TIMEOUT;
for (idx = 0; req[idx] != '\n'; idx++)
usb_putchar(req[idx]);
usb_putchar('\n');
if (NULL == ack)
return RESULT_OK;
res = RESULT_TIMEOUT;
timer_id = start_timer(delay);
while (timer_value(timer_id))
{
usb_getmsg();
if (usb_msg_ready)
{
res = RESULT_OK;
usb_msg_ready = 0;
memcpy(ack, usb_inbuf, (ack_size < USB_INBUF_SIZE)?ack_size:USB_INBUF_SIZE);
stop_timer(timer_id);
break;
}
}
stop_timer(timer_id);
return res;
}
void
srvtx()
{
int i;
uint8 length;
char txcall_in_ascii[SPIMAX * 2];
int ascii_idx;
flag &= ~Ftxcall;
length = txcall[0];
for (ntx = 0; ntx < length; ntx++) {
to_hex8_ascii(&txcall_in_ascii[ntx * 2], txcall[ntx]);
}
for (ascii_idx = 0; ascii_idx < length * 2; ascii_idx++) {
usb_putchar(txcall_in_ascii[ascii_idx]);
}
usb_flush( );
flag |= Ftxcall;
}
void serial_tx_byte(uint8_t tx_byte) {
// return usb_putc(tx_byte);
usb_putchar( tx_byte);
usb_flush( );
}
void usb_puts(const char * buf)
{
while (*buf)
usb_putchar(*buf++);
}
int usb_putchar_printf(char var, FILE *stream) {
// translate \n to \r for br@y++ terminal
if (var == '\n') usb_putchar('\r');
usb_putchar(var);
return 0;
}
void usb_write_line(char * string)
{
while (*string != '\0')
usb_putchar(*string++);
}
void
srvrxpeek()
{
uint8_t length;
uint8_t in_byte;
char nibbles[2];
int bytes_to_read;
if (rxstate != Urxing){
return;
}
GREEN=1;
dprint("start of reading ---- ");
nibbles[0] = usb_getchar();
if(nibbles[0] == 1){
dprint("info request\n");
usb_putchar(1);
dprint("flush\n");
usb_flush();
rxstate = Uready;
GREEN = 0;
return;
}
GREEN=0;
dprint("%c ", nibbles[0]);
nibbles[1] = usb_getchar();
dprint("%c ", nibbles[1]);
in_byte = hex8(&nibbles[0]);
dprint("(%x) ", in_byte);
if (nrx == 0) {
if (in_byte == 0) {
dprint("getting 0 size. error\n");
while (1) {;}
rxstate = Uready;
flag &= ~Frxcall;
return;
}
if (in_byte == 0xff) {
dprint("radio reset\n");
rxstate = Uready;
flag &= ~Frxcall;
return;
}
// if the index is still at 0, here is the length
rxcall[nrx++] = in_byte;
}
length = rxcall[0];
while (nrx < length) {
nibbles[0] = usb_getchar();
dprint("%c ", nibbles[0]);
nibbles[1] = usb_getchar();
dprint("%c ", nibbles[1]);
in_byte = hex8(&nibbles[0]);
dprint("(%x) ", in_byte);
rxcall[nrx++] = in_byte;
if(nrx == sizeof rxcall)
panic("usb: rxcall overrun");
}
if (nrx == length) {
rxstate = Uidle;
flag |= Frxcall;
dprint(" ---- read %d\n", length);
} else {
// if we didn't read everything, let's let
// WD take over here
dprint(" ---- only read %d out of %d\n", nrx, length);
while (1) {;}
}
}