static void __init omap_3430sdp_init(void)
{
int gpio_pendown;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_hsmmc_init(mmc);
omap3430_i2c_init();
omap_display_init(&sdp3430_dss_data);
platform_device_register(&sdp3430_lcd_device);
platform_device_register(&sdp3430_tfp410_device);
platform_device_register(&sdp3430_dvi_connector_device);
platform_device_register(&sdp3430_tv_connector_device);
if (omap_rev() > OMAP3430_REV_ES1_0)
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
else
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
omap_ads7846_init(1, gpio_pendown, 310, NULL);
omap_serial_init();
omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
sdp3430_display_init();
enable_board_wakeup_source();
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
static void __init omap3pandora_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_hsmmc_init(omap3pandora_mmc);
omap3pandora_i2c_init();
pandora_wl1251_init();
platform_add_devices(omap3pandora_devices,
ARRAY_SIZE(omap3pandora_devices));
omap_display_init(&pandora_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
gpmc_nand_init(&pandora_nand_data, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init am3517_evm_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
am3517_evm_i2c_init();
omap_display_init(&am3517_evm_dss_data);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
/* RTC - S35390A */
am3517_evm_rtc_init();
i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
ARRAY_SIZE(am3517evm_i2c1_boardinfo));
/*Ethernet*/
am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
/* MUSB */
am3517_evm_musb_init();
/* McBSP1 */
am3517_evm_mcbsp1_init();
/* MMC init function */
omap_hsmmc_init(mmc);
}
static void __init omap3_stalker_init(void)
{
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);
omap3_stalker_i2c_init();
platform_add_devices(omap3_stalker_devices,
ARRAY_SIZE(omap3_stalker_devices));
omap_display_init(&omap3_stalker_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP);
omap3stalker_init_eth();
omap3_stalker_display_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
}
static void __init overo_init(void)
{
int ret;
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
overo_i2c_init();
omap_hsmmc_init(mmc);
omap_display_init(&overo_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
board_nand_init(overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
overo_spi_init();
overo_init_smsc911x();
overo_init_led();
overo_init_keys();
omap_twl4030_audio_init("overo", NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
"OVERO_GPIO_W2W_NRESET");
if (ret == 0) {
gpio_export(OVERO_GPIO_W2W_NRESET, 0);
gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
udelay(10);
gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
} else {
pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
}
ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
if (ret) {
pr_err("%s: could not obtain BT gpios\n", __func__);
} else {
gpio_export(OVERO_GPIO_BT_XGATE, 0);
gpio_export(OVERO_GPIO_BT_NRESET, 0);
gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
mdelay(6);
gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
}
ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
"OVERO_GPIO_USBH_CPEN");
if (ret == 0)
gpio_export(OVERO_GPIO_USBH_CPEN, 0);
else
pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
}
static void __init omap3_devkit8500_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_hsmmc_init(mmc); //HS MMC
omap3_devkit8500_i2c_init(); //require recheck for omap3_devkit8500_i2c_init()
/*[OMAP_DISPLAY DISABLED]*/
omap_display_init(&devkit8500_dss_data);
/*
* Platform Devices Registeration
* Leds, Keys, ....
*/
platform_add_devices(omap3_devkit8500_devices,
ARRAY_SIZE(omap3_devkit8500_devices));
/* [TOUCH SCREEN CONTROLLER] */
//omap_ads7846_init(2, OMAP3_DEVKIT8500_TS_GPIO, 0xA, NULL); /* in datasheet SPI2_CS0 */
/* [SERIAL PORTS] */
omap_serial_init();
/* [RAM Initialization] */
omap_sdrc_init(mt46h32m32lf6_sdrc_params,mt46h32m32lf6_sdrc_params);
/* [NAND Init] */
board_nand_init(devkit8500_nand_partitions,
ARRAY_SIZE(devkit8500_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3devkit8500", NULL);
/* [USB HOST] */
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
/* [USB OTG] */
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
/* [ETHERNET] */
omap_dm9000_init();
}
static void __init omap4_ehci_init(void)
{
int ret;
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL);
if (ret)
pr_err("Failed to add main_clk alias to auxclk3_ck\n");
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
int r;
mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap_hsmmc_late_init(mmc);
/*
* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
* high / others active low)
* DVI reset GPIO is different between beagle revisions
*/
/* Valid for all -xM revisions */
if (cpu_is_omap3630()) {
/*
* gpio + 1 on Xm controls the TFP410's enable line (active low)
* gpio + 2 control varies depending on the board rev as below:
* P7/P8 revisions(prototype): Camera EN
* A2+ revisions (production): LDO (DVI, serial, led blocks)
*/
r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW,
"nDVI_PWR_EN");
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
beagle_config.dvi_pd_gpio = gpio + 2;
} else {
/*
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio;
platform_device_register(&beagle_tfp410_device);
platform_device_register(&beagle_dvi_connector_device);
platform_device_register(&beagle_tv_connector_device);
/* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
phy_data[0].vcc_polarity = beagle_config.usb_pwr_level;
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
return 0;
}
static void __init igep_init(void)
{
regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
/* Get IGEP2 hardware revision */
igep2_get_revision();
omap_hsmmc_init(mmc);
/* Register I2C busses and drivers */
igep_i2c_init();
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
omap_serial_init();
omap_sdrc_init(m65kxxxxam_sdrc_params,
m65kxxxxam_sdrc_params);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
igep_flash_init();
igep_leds_init();
omap_twl4030_audio_init("igep2", NULL);
/*
* WLAN-BT combo module from MuRata which has a Marvell WLAN
* (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
*/
igep_wlan_bt_init();
if (machine_is_igep0020()) {
omap_display_init(&igep2_dss_data);
igep2_init_smsc911x();
usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
usbhs_init(&igep2_usbhs_bdata);
} else {
usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
usbhs_init(&igep3_usbhs_bdata);
}
}
static void __init cm_t35_init_usbh(void)
{
int err;
err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO,
GPIOF_OUT_INIT_LOW, "usb hub rst");
if (err) {
pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err);
} else {
udelay(10);
gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
msleep(1);
}
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
static int __init cm_t3517_init_usbh(void)
{
int err;
err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW,
"usb hub rst");
if (err) {
pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err);
} else {
udelay(10);
gpio_set_value(USB_HUB_RESET_GPIO, 1);
msleep(1);
}
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&cm_t3517_ehci_pdata);
return 0;
}
static void __init omap3_touchbook_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
pm_power_off = omap3_touchbook_poweroff;
if (system_rev >= 0x20 && system_rev <= 0x34301000) {
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_wp = 23;
} else {
omap_mux_init_gpio(29, OMAP_PIN_INPUT);
}
omap_hsmmc_init(mmc);
omap3_touchbook_i2c_init();
platform_add_devices(omap3_touchbook_devices,
ARRAY_SIZE(omap3_touchbook_devices));
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
/* Touchscreen and accelerometer */
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3touchbook_nand_partitions,
ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init omap3_evm_init(void)
{
struct omap_board_mux *obm;
omap3_evm_get_revision();
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
omap3_mux_init(obm, OMAP_PACKAGE_CBB);
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
omap3evm_twldata.vaux2 = &omap3evm_vaux2;
omap3_evm_i2c_init();
omap_display_init(&omap3_evm_dss_data);
platform_device_register(&omap3_evm_lcd_device);
platform_device_register(&omap3_evm_tfp410_device);
platform_device_register(&omap3_evm_dvi_connector_device);
platform_device_register(&omap3_evm_tv_connector_device);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP);
/* Select EHCI port on main board */
omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT,
OMAP_PIN_INPUT_PULLUP);
gpio_request_array(omap3_evm_ehci_gpios,
ARRAY_SIZE(omap3_evm_ehci_gpios));
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
phy_data[0].reset_gpio = 21;
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
musb_board_data.power = 500;
musb_board_data.extvbus = 1;
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
phy_data[0].reset_gpio = 135;
}
usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3evm_nand_partitions,
ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
#ifdef CONFIG_BROKEN
omap3_evm_display_init();
#endif
omap3_evm_wl12xx_init();
omap_twl4030_audio_init("omap3evm", NULL);
}
