static void
define_rasterizer_object(struct svga_context *svga,
struct svga_rasterizer_state *rast)
{
unsigned fill_mode = translate_fill_mode(rast->templ.fill_front);
unsigned cull_mode = translate_cull_mode(rast->templ.cull_face);
int depth_bias = rast->templ.offset_units;
float slope_scaled_depth_bias = rast->templ.offset_scale;
float depth_bias_clamp = 0.0; /* XXX fix me */
unsigned try;
const float line_width = rast->templ.line_width > 0.0f ?
rast->templ.line_width : 1.0f;
const uint8 line_factor = rast->templ.line_stipple_enable ?
rast->templ.line_stipple_factor : 0;
const uint16 line_pattern = rast->templ.line_stipple_enable ?
rast->templ.line_stipple_pattern : 0;
rast->id = util_bitmask_add(svga->rast_object_id_bm);
if (rast->templ.fill_front != rast->templ.fill_back) {
/* The VGPU10 device can't handle different front/back fill modes.
* We'll handle that with a swtnl/draw fallback. But we need to
* make sure we always fill triangles in that case.
*/
fill_mode = SVGA3D_FILLMODE_FILL;
}
for (try = 0; try < 2; try++) {
enum pipe_error ret =
SVGA3D_vgpu10_DefineRasterizerState(svga->swc,
rast->id,
fill_mode,
cull_mode,
rast->templ.front_ccw,
depth_bias,
depth_bias_clamp,
slope_scaled_depth_bias,
rast->templ.depth_clip,
rast->templ.scissor,
rast->templ.multisample,
rast->templ.line_smooth,
line_width,
rast->templ.line_stipple_enable,
line_factor,
line_pattern,
!rast->templ.flatshade_first);
if (ret == PIPE_OK)
return;
svga_context_flush(svga, NULL);
}
}
static void *
svga_create_rasterizer_state(struct pipe_context *pipe,
const struct pipe_rasterizer_state *templ)
{
struct svga_context *svga = svga_context(pipe);
struct svga_rasterizer_state *rast = CALLOC_STRUCT( svga_rasterizer_state );
struct svga_screen *screen = svga_screen(pipe->screen);
/* need this for draw module. */
rast->templ = *templ;
/* light_twoside - XXX: need fragment shader variant */
/* poly_smooth - XXX: no fallback available */
/* poly_stipple_enable - draw module */
/* sprite_coord_enable - ? */
/* point_quad_rasterization - ? */
/* point_size_per_vertex - ? */
/* sprite_coord_mode - ??? */
/* flatshade_first - handled by index translation */
/* half_pixel_center - XXX - viewport code */
/* line_width - draw module */
/* fill_cw, fill_ccw - draw module or index translation */
rast->shademode = svga_translate_flatshade( templ->flatshade );
rast->cullmode = svga_translate_cullmode( templ->cull_face,
templ->front_ccw );
rast->scissortestenable = templ->scissor;
rast->multisampleantialias = templ->multisample;
rast->antialiasedlineenable = templ->line_smooth;
rast->lastpixel = templ->line_last_pixel;
rast->pointsprite = templ->sprite_coord_enable != 0x0;
if (templ->point_smooth) {
/* For smooth points we need to generate fragments for at least
* a 2x2 region. Otherwise the quad we draw may be too small and
* we may generate no fragments at all.
*/
rast->pointsize = MAX2(2.0f, templ->point_size);
}
else {
rast->pointsize = templ->point_size;
}
rast->hw_fillmode = PIPE_POLYGON_MODE_FILL;
/* Use swtnl + decomposition implement these:
*/
if (templ->line_width <= screen->maxLineWidth) {
/* pass line width to device */
rast->linewidth = MAX2(1.0F, templ->line_width);
}
else if (svga->debug.no_line_width) {
/* nothing */
}
else {
/* use 'draw' pipeline for wide line */
rast->need_pipeline |= SVGA_PIPELINE_FLAG_LINES;
rast->need_pipeline_lines_str = "line width";
}
if (templ->line_stipple_enable) {
if (screen->haveLineStipple || svga->debug.force_hw_line_stipple) {
SVGA3dLinePattern lp;
lp.repeat = templ->line_stipple_factor + 1;
lp.pattern = templ->line_stipple_pattern;
rast->linepattern = lp.uintValue;
}
else {
/* use 'draw' module to decompose into short line segments */
rast->need_pipeline |= SVGA_PIPELINE_FLAG_LINES;
rast->need_pipeline_lines_str = "line stipple";
}
}
if (!svga_have_vgpu10(svga) && templ->point_smooth) {
rast->need_pipeline |= SVGA_PIPELINE_FLAG_POINTS;
rast->need_pipeline_points_str = "smooth points";
}
if (templ->line_smooth && !screen->haveLineSmooth) {
/*
* XXX: Enabling the pipeline slows down performance immensely, so ignore
* line smooth state, where there is very little visual improvement.
* Smooth lines will still be drawn for wide lines.
*/
#if 0
rast->need_pipeline |= SVGA_PIPELINE_FLAG_LINES;
rast->need_pipeline_lines_str = "smooth lines";
#endif
}
{
int fill_front = templ->fill_front;
int fill_back = templ->fill_back;
int fill = PIPE_POLYGON_MODE_FILL;
boolean offset_front = util_get_offset(templ, fill_front);
boolean offset_back = util_get_offset(templ, fill_back);
boolean offset = FALSE;
switch (templ->cull_face) {
case PIPE_FACE_FRONT_AND_BACK:
offset = FALSE;
fill = PIPE_POLYGON_MODE_FILL;
break;
case PIPE_FACE_FRONT:
offset = offset_front;
fill = fill_front;
break;
case PIPE_FACE_BACK:
offset = offset_back;
fill = fill_back;
break;
case PIPE_FACE_NONE:
if (fill_front != fill_back || offset_front != offset_back)
{
/* Always need the draw module to work out different
* front/back fill modes:
*/
rast->need_pipeline |= SVGA_PIPELINE_FLAG_TRIS;
rast->need_pipeline_tris_str = "different front/back fillmodes";
}
else {
offset = offset_front;
fill = fill_front;
}
break;
default:
assert(0);
break;
}
/* Unfilled primitive modes aren't implemented on all virtual
* hardware. We can do some unfilled processing with index
* translation, but otherwise need the draw module:
*/
if (fill != PIPE_POLYGON_MODE_FILL &&
(templ->flatshade ||
templ->light_twoside ||
offset ||
templ->cull_face != PIPE_FACE_NONE))
{
fill = PIPE_POLYGON_MODE_FILL;
rast->need_pipeline |= SVGA_PIPELINE_FLAG_TRIS;
rast->need_pipeline_tris_str = "unfilled primitives with no index manipulation";
}
/* If we are decomposing to lines, and lines need the pipeline,
* then we also need the pipeline for tris.
*/
if (fill == PIPE_POLYGON_MODE_LINE &&
(rast->need_pipeline & SVGA_PIPELINE_FLAG_LINES))
{
fill = PIPE_POLYGON_MODE_FILL;
rast->need_pipeline |= SVGA_PIPELINE_FLAG_TRIS;
rast->need_pipeline_tris_str = "decomposing lines";
}
/* Similarly for points:
*/
if (fill == PIPE_POLYGON_MODE_POINT &&
(rast->need_pipeline & SVGA_PIPELINE_FLAG_POINTS))
{
fill = PIPE_POLYGON_MODE_FILL;
rast->need_pipeline |= SVGA_PIPELINE_FLAG_TRIS;
rast->need_pipeline_tris_str = "decomposing points";
}
if (offset) {
rast->slopescaledepthbias = templ->offset_scale;
rast->depthbias = templ->offset_units;
}
rast->hw_fillmode = fill;
}
if (rast->need_pipeline & SVGA_PIPELINE_FLAG_TRIS) {
/* Turn off stuff which will get done in the draw module:
*/
rast->hw_fillmode = PIPE_POLYGON_MODE_FILL;
rast->slopescaledepthbias = 0;
rast->depthbias = 0;
}
if (0 && rast->need_pipeline) {
debug_printf("svga: rast need_pipeline = 0x%x\n", rast->need_pipeline);
debug_printf(" pnts: %s \n", rast->need_pipeline_points_str);
debug_printf(" lins: %s \n", rast->need_pipeline_lines_str);
debug_printf(" tris: %s \n", rast->need_pipeline_tris_str);
}
if (svga_have_vgpu10(svga)) {
define_rasterizer_object(svga, rast);
}
if (templ->poly_smooth) {
pipe_debug_message(&svga->debug.callback, CONFORMANCE,
"GL_POLYGON_SMOOTH not supported");
}
svga->hud.num_state_objects++;
return rast;
}
static void svga_bind_rasterizer_state( struct pipe_context *pipe,
void *state )
{
struct svga_context *svga = svga_context(pipe);
struct svga_rasterizer_state *raster = (struct svga_rasterizer_state *)state;
if (!raster ||
!svga->curr.rast ||
raster->templ.poly_stipple_enable !=
svga->curr.rast->templ.poly_stipple_enable) {
svga->dirty |= SVGA_NEW_STIPPLE;
}
svga->curr.rast = raster;
svga->dirty |= SVGA_NEW_RAST;
}
static void
svga_delete_rasterizer_state(struct pipe_context *pipe, void *state)
{
struct svga_context *svga = svga_context(pipe);
struct svga_rasterizer_state *raster =
(struct svga_rasterizer_state *) state;
if (svga_have_vgpu10(svga)) {
enum pipe_error ret =
SVGA3D_vgpu10_DestroyRasterizerState(svga->swc, raster->id);
if (ret != PIPE_OK) {
svga_context_flush(svga, NULL);
ret = SVGA3D_vgpu10_DestroyRasterizerState(svga->swc, raster->id);
}
if (raster->id == svga->state.hw_draw.rasterizer_id)
svga->state.hw_draw.rasterizer_id = SVGA3D_INVALID_ID;
util_bitmask_clear(svga->rast_object_id_bm, raster->id);
}
FREE(state);
svga->hud.num_state_objects--;
}
void svga_init_rasterizer_functions( struct svga_context *svga )
{
svga->pipe.create_rasterizer_state = svga_create_rasterizer_state;
svga->pipe.bind_rasterizer_state = svga_bind_rasterizer_state;
svga->pipe.delete_rasterizer_state = svga_delete_rasterizer_state;
}
static void *
svga_create_rasterizer_state(struct pipe_context *pipe,
const struct pipe_rasterizer_state *templ)
{
struct svga_context *svga = svga_context(pipe);
struct svga_rasterizer_state *rast = CALLOC_STRUCT( svga_rasterizer_state );
/* need this for draw module. */
rast->templ = *templ;
/* light_twoside - XXX: need fragment shader variant */
/* poly_smooth - XXX: no fallback available */
/* poly_stipple_enable - draw module */
/* sprite_coord_enable - ? */
/* point_quad_rasterization - ? */
/* point_size_per_vertex - ? */
/* sprite_coord_mode - ??? */
/* flatshade_first - handled by index translation */
/* gl_rasterization_rules - XXX - viewport code */
/* line_width - draw module */
/* fill_cw, fill_ccw - draw module or index translation */
rast->shademode = svga_translate_flatshade( templ->flatshade );
rast->cullmode = svga_translate_cullmode( templ->cull_face,
templ->front_ccw );
rast->scissortestenable = templ->scissor;
rast->multisampleantialias = templ->multisample;
rast->antialiasedlineenable = templ->line_smooth;
rast->lastpixel = templ->line_last_pixel;
rast->pointsprite = templ->sprite_coord_enable != 0x0;
rast->pointsize = templ->point_size;
rast->hw_unfilled = PIPE_POLYGON_MODE_FILL;
/* Use swtnl + decomposition implement these:
*/
if (templ->poly_stipple_enable) {
rast->need_pipeline |= SVGA_PIPELINE_FLAG_TRIS;
rast->need_pipeline_tris_str = "poly stipple";
}
if (templ->line_width >= 1.5f &&
!svga->debug.no_line_width) {
rast->need_pipeline |= SVGA_PIPELINE_FLAG_LINES;
rast->need_pipeline_lines_str = "line width";
}
if (templ->line_stipple_enable) {
/* XXX: LinePattern not implemented on all backends, and there is no
* mechanism to query it.
*/
if (!svga->debug.force_hw_line_stipple) {
SVGA3dLinePattern lp;
lp.repeat = templ->line_stipple_factor + 1;
lp.pattern = templ->line_stipple_pattern;
rast->linepattern = lp.uintValue;
}
else {
rast->need_pipeline |= SVGA_PIPELINE_FLAG_LINES;
rast->need_pipeline_lines_str = "line stipple";
}
}
if (templ->point_smooth) {
rast->need_pipeline |= SVGA_PIPELINE_FLAG_POINTS;
rast->need_pipeline_points_str = "smooth points";
}
if (templ->line_smooth) {
rast->need_pipeline |= SVGA_PIPELINE_FLAG_LINES;
rast->need_pipeline_lines_str = "smooth lines";
}
{
int fill_front = templ->fill_front;
int fill_back = templ->fill_back;
int fill = PIPE_POLYGON_MODE_FILL;
boolean offset_front = util_get_offset(templ, fill_front);
boolean offset_back = util_get_offset(templ, fill_back);
boolean offset = 0;
switch (templ->cull_face) {
case PIPE_FACE_FRONT_AND_BACK:
offset = 0;
fill = PIPE_POLYGON_MODE_FILL;
break;
case PIPE_FACE_FRONT:
offset = offset_front;
fill = fill_front;
break;
case PIPE_FACE_BACK:
offset = offset_back;
fill = fill_back;
break;
case PIPE_FACE_NONE:
if (fill_front != fill_back || offset_front != offset_back)
{
/* Always need the draw module to work out different
* front/back fill modes:
*/
rast->need_pipeline |= SVGA_PIPELINE_FLAG_TRIS;
rast->need_pipeline_tris_str = "different front/back fillmodes";
}
else {
offset = offset_front;
fill = fill_front;
}
break;
default:
assert(0);
break;
}
/* Unfilled primitive modes aren't implemented on all virtual
* hardware. We can do some unfilled processing with index
* translation, but otherwise need the draw module:
*/
if (fill != PIPE_POLYGON_MODE_FILL &&
(templ->flatshade ||
templ->light_twoside ||
offset ||
templ->cull_face != PIPE_FACE_NONE))
{
fill = PIPE_POLYGON_MODE_FILL;
rast->need_pipeline |= SVGA_PIPELINE_FLAG_TRIS;
rast->need_pipeline_tris_str = "unfilled primitives with no index manipulation";
}
/* If we are decomposing to lines, and lines need the pipeline,
* then we also need the pipeline for tris.
*/
if (fill == PIPE_POLYGON_MODE_LINE &&
(rast->need_pipeline & SVGA_PIPELINE_FLAG_LINES))
{
fill = PIPE_POLYGON_MODE_FILL;
rast->need_pipeline |= SVGA_PIPELINE_FLAG_TRIS;
rast->need_pipeline_tris_str = "decomposing lines";
}
/* Similarly for points:
*/
if (fill == PIPE_POLYGON_MODE_POINT &&
(rast->need_pipeline & SVGA_PIPELINE_FLAG_POINTS))
{
fill = PIPE_POLYGON_MODE_FILL;
rast->need_pipeline |= SVGA_PIPELINE_FLAG_TRIS;
rast->need_pipeline_tris_str = "decomposing points";
}
if (offset) {
rast->slopescaledepthbias = templ->offset_scale;
rast->depthbias = templ->offset_units;
}
rast->hw_unfilled = fill;
}
if (rast->need_pipeline & SVGA_PIPELINE_FLAG_TRIS) {
/* Turn off stuff which will get done in the draw module:
*/
rast->hw_unfilled = PIPE_POLYGON_MODE_FILL;
rast->slopescaledepthbias = 0;
rast->depthbias = 0;
}
return rast;
}
