int rk30_lcdc_pan_display(struct rk_lcdc_device_driver * dev_drv,int layer_id)
{
struct rk30_lcdc_device *lcdc_dev = container_of(dev_drv,struct rk30_lcdc_device,driver);
struct layer_par *par = NULL;
rk_screen *screen = dev_drv->cur_screen;
unsigned long flags;
int timeout;
if(!screen)
{
printk(KERN_ERR "screen is null!\n");
return -ENOENT;
}
if(layer_id==0)
{
par = dev_drv->layer_par[0];
win0_display(lcdc_dev,par);
}
else if(layer_id==1)
{
par = dev_drv->layer_par[1];
win1_display(lcdc_dev,par);
}
else if(layer_id == 2)
{
par = dev_drv->layer_par[2];
win2_display(lcdc_dev,par);
}
if((dev_drv->first_frame)) //this is the first frame of the system ,enable frame start interrupt
{
dev_drv->first_frame = 0;
lcdc_msk_reg(lcdc_dev,INT_STATUS,m_FRM_START_INT_CLEAR |m_FRM_START_INT_EN ,
v_FRM_START_INT_CLEAR(1) | v_FRM_START_INT_EN(1));
lcdc_cfg_done(lcdc_dev); // write any value to REG_CFG_DONE let config become effective
}
if(dev_drv->num_buf < 3) //3buffer ,no need to wait for sysn
{
spin_lock_irqsave(&dev_drv->cpl_lock,flags);
init_completion(&dev_drv->frame_done);
spin_unlock_irqrestore(&dev_drv->cpl_lock,flags);
timeout = wait_for_completion_timeout(&dev_drv->frame_done,msecs_to_jiffies(dev_drv->cur_screen->ft+5));
if(!timeout&&(!dev_drv->frame_done.done))
{
printk(KERN_ERR "wait for new frame start time out!\n");
return -ETIMEDOUT;
}
}
return 0;
}
int rk3066b_lcdc_pan_display(struct rk_lcdc_device_driver * dev_drv,int layer_id)
{
struct rk3066b_lcdc_device *lcdc_dev = container_of(dev_drv,struct rk3066b_lcdc_device,driver);
struct layer_par *par = NULL;
rk_screen *screen = dev_drv->cur_screen;
unsigned long flags;
int timeout;
if(!screen)
{
printk(KERN_ERR "screen is null!\n");
return -ENOENT;
}
if(layer_id==0)
{
par = dev_drv->layer_par[0];
win0_display(lcdc_dev,par);
}
else if(layer_id==1)
{
par = dev_drv->layer_par[1];
win1_display(lcdc_dev,par);
}
if((dev_drv->first_frame)) //this is the first frame of the system ,enable frame start interrupt
{
dev_drv->first_frame = 0;
LcdMskReg(lcdc_dev,INT_STATUS,m_HOR_STARTMASK | m_FRM_STARTMASK | m_SCANNING_MASK |
m_HOR_STARTCLEAR | m_FRM_STARTCLEAR |m_SCANNING_CLEAR | m_SCAN_LINE_NUM,
v_HOR_STARTMASK(1) | v_FRM_STARTMASK(0) | v_SCANNING_MASK(0) |
v_HOR_STARTCLEAR(1) | v_FRM_STARTCLEAR(1) | v_SCANNING_CLEAR(1) |
//v_SCANNING_CLEAR(screen->vsync_len + screen->upper_margin+screen->y_res -1));
v_SCAN_LINE_NUM(screen->vsync_len + screen->upper_margin+screen->y_res -1));
LCDC_REG_CFG_DONE(); // write any value to REG_CFG_DONE let config become effective
}
#if 0
if(dev_drv->num_buf < 3) //3buffer ,no need to wait for sysn
{
spin_lock_irqsave(&dev_drv->cpl_lock,flags);
init_completion(&dev_drv->frame_done);
spin_unlock_irqrestore(&dev_drv->cpl_lock,flags);
timeout = wait_for_completion_timeout(&dev_drv->frame_done,msecs_to_jiffies(dev_drv->cur_screen->ft+5));
if(!timeout&&(!dev_drv->frame_done.done))
{
printk(KERN_ERR "wait for new frame start time out!\n");
return -ETIMEDOUT;
}
}
#endif
return 0;
}
