/*******************************************************************************
* wl_process_security_status()
*******************************************************************************
*
* DESCRIPTION:
*
* Process the security status message signaled by the device.
*
* PARAMETERS:
*
* lp - a pointer to the device's private structure
*
* RETURNS:
*
* N/A
*
******************************************************************************/
void wl_process_security_status( struct wl_private *lp )
{
SECURITY_STATUS_STRCT *sec_stat;
/*------------------------------------------------------------------------*/
DBG_FUNC( "wl_process_security_status" );
DBG_ENTER( DbgInfo );
if( lp != NULL ) {
sec_stat = (SECURITY_STATUS_STRCT *)&lp->sec_stat;
wl_endian_translate_event( (ltv_t *)sec_stat );
switch( sec_stat->securityStatus ) {
case 1:
DBG_TRACE( DbgInfo, "Security Status : Dissassociate [AP]\n" );
break;
case 2:
DBG_TRACE( DbgInfo, "Security Status : Deauthenticate [AP]\n" );
break;
case 3:
DBG_TRACE( DbgInfo, "Security Status : Authenticate Fail [STA] or [AP]\n" );
break;
case 4:
DBG_TRACE( DbgInfo, "Security Status : MIC Fail\n" );
break;
case 5:
DBG_TRACE( DbgInfo, "Security Status : Associate Fail\n" );
break;
default:
DBG_TRACE( DbgInfo, "Security Status : UNKNOWN (0x%04x)\n",
sec_stat->securityStatus );
break;
}
DBG_TRACE( DbgInfo, "STA Address : %s\n",
DbgHwAddr( sec_stat->staAddr ));
DBG_TRACE( DbgInfo, "Reason : 0x%04x \n", sec_stat->reason );
}
DBG_LEAVE( DbgInfo );
return;
} // wl_process_security_status
/*******************************************************************************
* wl_process_assoc_status()
*******************************************************************************
*
* DESCRIPTION:
*
* Process the association status event signaled by the device.
*
* PARAMETERS:
*
* lp - a pointer to the device's private structure
*
* RETURNS:
*
* N/A
*
******************************************************************************/
void wl_process_assoc_status( struct wl_private *lp )
{
ASSOC_STATUS_STRCT *assoc_stat;
/*------------------------------------------------------------------------*/
DBG_FUNC( "wl_process_assoc_status" );
DBG_ENTER( DbgInfo );
if( lp != NULL ) {
assoc_stat = (ASSOC_STATUS_STRCT *)&lp->assoc_stat;
wl_endian_translate_event( (ltv_t *)assoc_stat );
switch( assoc_stat->assocStatus ) {
case 1:
DBG_TRACE( DbgInfo, "Association Status : STA Associated\n" );
break;
case 2:
DBG_TRACE( DbgInfo, "Association Status : STA Reassociated\n" );
break;
case 3:
DBG_TRACE( DbgInfo, "Association Status : STA Disassociated\n" );
break;
default:
DBG_TRACE( DbgInfo, "Association Status : UNKNOWN (0x%04x)\n",
assoc_stat->assocStatus );
break;
}
DBG_TRACE( DbgInfo, "STA Address : %s\n",
DbgHwAddr( assoc_stat->staAddr ));
if(( assoc_stat->assocStatus == 2 ) && ( assoc_stat->len == 8 )) {
DBG_TRACE( DbgInfo, "Old AP Address : %s\n",
DbgHwAddr( assoc_stat->oldApAddr ));
}
}
DBG_LEAVE( DbgInfo );
return;
} // wl_process_assoc_status
/*******************************************************************************
* wl_process_probe_response()
*******************************************************************************
*
* DESCRIPTION:
*
* Process the probe responses retunred by the device as a result of an
* active scan.
*
* PARAMETERS:
*
* lp - a pointer to the device's private structure
*
* RETURNS:
*
* N/A
*
******************************************************************************/
void wl_process_probe_response( struct wl_private *lp )
{
PROBE_RESP *probe_rsp;
hcf_8 *wpa_ie = NULL;
hcf_16 wpa_ie_len = 0;
/*------------------------------------------------------------------------*/
DBG_FUNC( "wl_process_probe_response" );
DBG_ENTER( DbgInfo );
if( lp != NULL ) {
probe_rsp = (PROBE_RESP *)&lp->ProbeResp;
wl_endian_translate_event( (ltv_t *)probe_rsp );
DBG_TRACE( DbgInfo, "(%s) =========================\n", lp->dev->name );
DBG_TRACE( DbgInfo, "(%s) length : 0x%04x.\n", lp->dev->name,
probe_rsp->length );
if( probe_rsp->length > 1 ) {
DBG_TRACE( DbgInfo, "(%s) infoType : 0x%04x.\n", lp->dev->name,
probe_rsp->infoType );
DBG_TRACE( DbgInfo, "(%s) signal : 0x%02x.\n", lp->dev->name,
probe_rsp->signal );
DBG_TRACE( DbgInfo, "(%s) silence : 0x%02x.\n", lp->dev->name,
probe_rsp->silence );
DBG_TRACE( DbgInfo, "(%s) rxFlow : 0x%02x.\n", lp->dev->name,
probe_rsp->rxFlow );
DBG_TRACE( DbgInfo, "(%s) rate : 0x%02x.\n", lp->dev->name,
probe_rsp->rate );
DBG_TRACE( DbgInfo, "(%s) frame cntl : 0x%04x.\n", lp->dev->name,
probe_rsp->frameControl );
DBG_TRACE( DbgInfo, "(%s) durID : 0x%04x.\n", lp->dev->name,
probe_rsp->durID );
DBG_TRACE(DbgInfo, "(%s) address1 : %pM\n", lp->dev->name,
probe_rsp->address1);
DBG_TRACE(DbgInfo, "(%s) address2 : %pM\n", lp->dev->name,
probe_rsp->address2);
DBG_TRACE(DbgInfo, "(%s) BSSID : %pM\n", lp->dev->name,
probe_rsp->BSSID);
DBG_TRACE( DbgInfo, "(%s) sequence : 0x%04x.\n", lp->dev->name,
probe_rsp->sequence );
DBG_TRACE(DbgInfo, "(%s) address4 : %pM\n", lp->dev->name,
probe_rsp->address4);
DBG_TRACE( DbgInfo, "(%s) datalength : 0x%04x.\n", lp->dev->name,
probe_rsp->dataLength );
DBG_TRACE(DbgInfo, "(%s) DA : %pM\n", lp->dev->name,
probe_rsp->DA);
DBG_TRACE(DbgInfo, "(%s) SA : %pM\n", lp->dev->name,
probe_rsp->SA);
#ifdef WARP
DBG_TRACE( DbgInfo, "(%s) channel : %d\n", lp->dev->name,
probe_rsp->channel );
DBG_TRACE( DbgInfo, "(%s) band : %d\n", lp->dev->name,
probe_rsp->band );
#else
DBG_TRACE( DbgInfo, "(%s) lenType : 0x%04x.\n", lp->dev->name,
probe_rsp->lenType );
#endif // WARP
DBG_TRACE( DbgInfo, "(%s) timeStamp : %d.%d.%d.%d.%d.%d.%d.%d\n",
lp->dev->name,
probe_rsp->timeStamp[0],
probe_rsp->timeStamp[1],
probe_rsp->timeStamp[2],
probe_rsp->timeStamp[3],
probe_rsp->timeStamp[4],
probe_rsp->timeStamp[5],
probe_rsp->timeStamp[6],
probe_rsp->timeStamp[7]);
DBG_TRACE( DbgInfo, "(%s) beaconInt : 0x%04x.\n", lp->dev->name,
probe_rsp->beaconInterval );
DBG_TRACE( DbgInfo, "(%s) capability : 0x%04x.\n", lp->dev->name,
probe_rsp->capability );
DBG_TRACE( DbgInfo, "(%s) SSID len : 0x%04x.\n", lp->dev->name,
probe_rsp->rawData[1] );
if( probe_rsp->rawData[1] > 0 ) {
char ssid[HCF_MAX_NAME_LEN];
memset( ssid, 0, sizeof( ssid ));
strncpy( ssid, &probe_rsp->rawData[2],
probe_rsp->rawData[1] );
DBG_TRACE( DbgInfo, "(%s) SSID : %s\n",
lp->dev->name, ssid );
}
/* Parse out the WPA-IE, if one exists */
wpa_ie = wl_parse_wpa_ie( probe_rsp, &wpa_ie_len );
if( wpa_ie != NULL ) {
DBG_TRACE( DbgInfo, "(%s) WPA-IE : %s\n",
lp->dev->name, wl_print_wpa_ie( wpa_ie, wpa_ie_len ));
}
DBG_TRACE( DbgInfo, "(%s) flags : 0x%04x.\n",
lp->dev->name, probe_rsp->flags );
}
DBG_TRACE( DbgInfo, "\n" );
/* If probe response length is 1, then the scan is complete */
if( probe_rsp->length == 1 ) {
DBG_TRACE( DbgInfo, "SCAN COMPLETE\n" );
lp->probe_results.num_aps = lp->probe_num_aps;
lp->probe_results.scan_complete = TRUE;
/* Reset the counter for the next scan request */
lp->probe_num_aps = 0;
/* Send a wireless extensions event that the scan completed */
wl_wext_event_scan_complete( lp->dev );
} else {
/* Only copy to the table if the entry is unique; APs sometimes
respond more than once to a probe */
if( lp->probe_num_aps == 0 ) {
/* Copy the info to the ScanResult structure in the private
adapter struct */
memcpy( &( lp->probe_results.ProbeTable[lp->probe_num_aps] ),
probe_rsp, sizeof( PROBE_RESP ));
/* Increment the number of APs detected */
lp->probe_num_aps++;
} else {
int count;
int unique = 1;
for( count = 0; count < lp->probe_num_aps; count++ ) {
if( memcmp( &( probe_rsp->BSSID ),
lp->probe_results.ProbeTable[count].BSSID,
ETH_ALEN ) == 0 ) {
unique = 0;
}
}
if( unique ) {
/* Copy the info to the ScanResult structure in the
private adapter struct. Only copy if there's room in the
table */
if( lp->probe_num_aps < MAX_NAPS )
{
memcpy( &( lp->probe_results.ProbeTable[lp->probe_num_aps] ),
probe_rsp, sizeof( PROBE_RESP ));
}
else
{
DBG_WARNING( DbgInfo, "Num of scan results exceeds storage, truncating\n" );
}
/* Increment the number of APs detected. Note I do this
here even when I don't copy the probe response to the
buffer in order to detect the overflow condition */
lp->probe_num_aps++;
}
}
}
}
DBG_LEAVE( DbgInfo );
return;
} // wl_process_probe_response