int wl1271_init_ap_rates(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
int i, ret;
struct conf_tx_rate_class rc;
u32 supported_rates;
wl1271_debug(DEBUG_AP, "AP basic rate set: 0x%x",
wlvif->basic_rate_set);
if (wlvif->basic_rate_set == 0)
return -EINVAL;
rc.enabled_rates = wlvif->basic_rate_set;
rc.long_retry_limit = 10;
rc.short_retry_limit = 10;
rc.aflags = 0;
ret = wl1271_acx_ap_rate_policy(wl, &rc, wlvif->ap.mgmt_rate_idx);
if (ret < 0)
return ret;
/* use the min basic rate for AP broadcast/multicast */
rc.enabled_rates = wl1271_tx_min_rate_get(wl, wlvif->basic_rate_set);
rc.short_retry_limit = 10;
rc.long_retry_limit = 10;
rc.aflags = 0;
ret = wl1271_acx_ap_rate_policy(wl, &rc, wlvif->ap.bcast_rate_idx);
if (ret < 0)
return ret;
/*
* If the basic rates contain OFDM rates, use OFDM only
* rates for unicast TX as well. Else use all supported rates.
*/
if ((wlvif->basic_rate_set & CONF_TX_OFDM_RATES))
supported_rates = CONF_TX_OFDM_RATES;
else
supported_rates = CONF_TX_ENABLED_RATES;
/* unconditionally enable HT rates */
supported_rates |= CONF_TX_MCS_RATES;
/* get extra MIMO or wide-chan rates where the HW supports it */
supported_rates |= wlcore_hw_ap_get_mimo_wide_rate_mask(wl, wlvif);
/* configure unicast TX rate classes */
for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
rc.enabled_rates = supported_rates;
rc.short_retry_limit = 10;
rc.long_retry_limit = 10;
rc.aflags = 0;
ret = wl1271_acx_ap_rate_policy(wl, &rc,
wlvif->ap.ucast_rate_idx[i]);
if (ret < 0)
return ret;
}
return 0;
}
int wl18xx_cmd_channel_switch(struct wl1271 *wl,
struct wl12xx_vif *wlvif,
struct ieee80211_channel_switch *ch_switch)
{
struct wl18xx_cmd_channel_switch *cmd;
u32 supported_rates;
int ret;
wl1271_debug(DEBUG_ACX, "cmd channel switch");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->role_id = wlvif->role_id;
cmd->channel = ch_switch->chandef.chan->hw_value;
cmd->switch_time = ch_switch->count;
cmd->stop_tx = ch_switch->block_tx;
switch (ch_switch->chandef.chan->band) {
case IEEE80211_BAND_2GHZ:
cmd->band = WLCORE_BAND_2_4GHZ;
break;
case IEEE80211_BAND_5GHZ:
cmd->band = WLCORE_BAND_5GHZ;
break;
default:
wl1271_error("invalid channel switch band: %d",
ch_switch->chandef.chan->band);
ret = -EINVAL;
goto out_free;
}
supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES;
if (wlvif->bss_type == BSS_TYPE_STA_BSS)
supported_rates |= wlcore_hw_sta_get_ap_rate_mask(wl, wlvif);
else
supported_rates |=
wlcore_hw_ap_get_mimo_wide_rate_mask(wl, wlvif);
if (wlvif->p2p)
supported_rates &= ~CONF_TX_CCK_RATES;
cmd->local_supported_rates = cpu_to_le32(supported_rates);
cmd->channel_type = wlvif->channel_type;
ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send channel switch command");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_role_start_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
struct wl12xx_cmd_role_start *cmd;
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
u32 supported_rates;
int ret;
wl1271_debug(DEBUG_CMD, "cmd role start ap %d", wlvif->role_id);
/* trying to use hidden SSID with an old hostapd version */
if (wlvif->ssid_len == 0 && !bss_conf->hidden_ssid) {
wl1271_error("got a null SSID from beacon/bss");
ret = -EINVAL;
goto out;
}
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
ret = wl12xx_allocate_link(wl, wlvif, &wlvif->ap.global_hlid);
if (ret < 0)
goto out_free;
ret = wl12xx_allocate_link(wl, wlvif, &wlvif->ap.bcast_hlid);
if (ret < 0)
goto out_free_global;
/* use the previous security seq, if this is a recovery/resume */
wl->links[wlvif->ap.bcast_hlid].total_freed_pkts =
wlvif->total_freed_pkts;
cmd->role_id = wlvif->role_id;
cmd->ap.aging_period = cpu_to_le16(wl->conf.tx.ap_aging_period);
cmd->ap.bss_index = WL1271_AP_BSS_INDEX;
cmd->ap.global_hlid = wlvif->ap.global_hlid;
cmd->ap.broadcast_hlid = wlvif->ap.bcast_hlid;
cmd->ap.global_session_id = wl->session_ids[wlvif->ap.global_hlid];
cmd->ap.bcast_session_id = wl->session_ids[wlvif->ap.bcast_hlid];
cmd->ap.basic_rate_set = cpu_to_le32(wlvif->basic_rate_set);
cmd->ap.beacon_interval = cpu_to_le16(wlvif->beacon_int);
cmd->ap.dtim_interval = bss_conf->dtim_period;
cmd->ap.beacon_expiry = WL1271_AP_DEF_BEACON_EXP;
/* FIXME: Change when adding DFS */
cmd->ap.reset_tsf = 1; /* By default reset AP TSF */
cmd->ap.wmm = wlvif->wmm_enabled;
cmd->channel = wlvif->channel;
cmd->channel_type = wlcore_get_native_channel_type(wlvif->channel_type);
if (!bss_conf->hidden_ssid) {
/* take the SSID from the beacon for backward compatibility */
cmd->ap.ssid_type = WL12XX_SSID_TYPE_PUBLIC;
cmd->ap.ssid_len = wlvif->ssid_len;
memcpy(cmd->ap.ssid, wlvif->ssid, wlvif->ssid_len);
} else {
cmd->ap.ssid_type = WL12XX_SSID_TYPE_HIDDEN;
cmd->ap.ssid_len = bss_conf->ssid_len;
memcpy(cmd->ap.ssid, bss_conf->ssid, bss_conf->ssid_len);
}
supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES |
wlcore_hw_ap_get_mimo_wide_rate_mask(wl, wlvif);
if (wlvif->p2p)
supported_rates &= ~CONF_TX_CCK_RATES;
wl1271_debug(DEBUG_CMD, "cmd role start ap with supported_rates 0x%08x",
supported_rates);
cmd->ap.local_rates = cpu_to_le32(supported_rates);
switch (wlvif->band) {
case IEEE80211_BAND_2GHZ:
cmd->band = WLCORE_BAND_2_4GHZ;
break;
case IEEE80211_BAND_5GHZ:
cmd->band = WLCORE_BAND_5GHZ;
break;
default:
wl1271_warning("ap start - unknown band: %d", (int)wlvif->band);
cmd->band = WLCORE_BAND_2_4GHZ;
break;
}
ret = wl1271_cmd_send(wl, CMD_ROLE_START, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd role start ap");
goto out_free_bcast;
}
goto out_free;
out_free_bcast:
wl12xx_free_link(wl, wlvif, &wlvif->ap.bcast_hlid);
out_free_global:
wl12xx_free_link(wl, wlvif, &wlvif->ap.global_hlid);
out_free:
kfree(cmd);
out:
return ret;
}
