void stepperSim::setEndstops(int minEndstopPinNr, int maxEndstopPinNr)
{
minEndstopPin = minEndstopPinNr;
maxEndstopPin = maxEndstopPinNr;
writeInput(minEndstopPin, stepValue != minStepValue);
writeInput(maxEndstopPin, stepValue != maxStepValue);
}
void stepperSim::stepPinUpdate(int pinNr, bool high)
{
if (high)//Only step on high->low transition.
return;
if (readOutput(enablePin))
return;
if (readOutput(dirPin) == invertDir)
stepValue --;
else
stepValue ++;
if (minStepValue == -1)
return;
if (stepValue < minStepValue)
stepValue = minStepValue;
if (stepValue > maxStepValue)
stepValue = maxStepValue;
if (minEndstopPin > -1)
writeInput(minEndstopPin, stepValue != minStepValue);
if (maxEndstopPin > -1)
writeInput(maxEndstopPin, stepValue != maxStepValue);
}
void sim_setup_main()
{
setupGui();
sim_setup(guiUpdate);
adcSim* adc = new adcSim();
arduinoIOSim* arduinoIO = new arduinoIOSim();
stepperSim* xStep = new stepperSim(arduinoIO, X_ENABLE_PIN, X_STEP_PIN, X_DIR_PIN, INVERT_X_DIR);
stepperSim* yStep = new stepperSim(arduinoIO, Y_ENABLE_PIN, Y_STEP_PIN, Y_DIR_PIN, INVERT_Y_DIR);
stepperSim* zStep = new stepperSim(arduinoIO, Z_ENABLE_PIN, Z_STEP_PIN, Z_DIR_PIN, INVERT_Z_DIR);
stepperSim* e0Step = new stepperSim(arduinoIO, E0_ENABLE_PIN, E0_STEP_PIN, E0_DIR_PIN, INVERT_E0_DIR);
stepperSim* e1Step = new stepperSim(arduinoIO, E1_ENABLE_PIN, E1_STEP_PIN, E1_DIR_PIN, INVERT_E1_DIR);
float stepsPerUnit[4] = DEFAULT_AXIS_STEPS_PER_UNIT;
xStep->setRange(0, X_MAX_POS * stepsPerUnit[X_AXIS]);
yStep->setRange(0, Y_MAX_POS * stepsPerUnit[Y_AXIS]);
zStep->setRange(0, Z_MAX_POS * stepsPerUnit[Z_AXIS]);
xStep->setEndstops(X_MIN_PIN, X_MAX_PIN);
yStep->setEndstops(Y_MIN_PIN, Y_MAX_PIN);
zStep->setEndstops(Z_MIN_PIN, Z_MAX_PIN);
(new printerSim(xStep, yStep, zStep, e0Step, e1Step))->setDrawPosition(5, 70);
e0Step->setDrawPosition(130, 100);
e1Step->setDrawPosition(130, 110);
(new heaterSim(HEATER_0_PIN, adc, TEMP_0_PIN))->setDrawPosition(130, 70);
(new heaterSim(HEATER_1_PIN, adc, TEMP_1_PIN))->setDrawPosition(130, 80);
(new heaterSim(HEATER_BED_PIN, adc, TEMP_BED_PIN, 0.2))->setDrawPosition(130, 90);
// new sdcardSimulation("c:/models/", 5000);
new sdcardSimulation("./models/", 5000);
(new serialSim())->setDrawPosition(150, 0);
#if defined(ULTIBOARD_V2_CONTROLLER) || defined(ENABLE_ULTILCD2)
i2cSim* i2c = new i2cSim();
(new displaySDD1309Sim(i2c))->setDrawPosition(0, 0);
(new ledPCA9632Sim(i2c))->setDrawPosition(1, 66);
#endif
#if defined(ULTIPANEL) && !defined(ULTIBOARD_V2_CONTROLLER)
(new displayHD44780Sim(arduinoIO, LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7))->setDrawPosition(0, 0);
#endif
// Initialize sd card detect signal
writeInput(SDCARDDETECT, !cardInserted);
}
void Tutorial2::on_n_valueChanged( int value )
{
writeInput( "n", value );
}
void guiUpdate()
{
for(unsigned int n=0; n<simComponentList.size(); n++)
simComponentList[n]->tick();
if (SDL_GetTicks() - lastUpdate < 25)
return;
lastUpdate = SDL_GetTicks();
int clickX = -1, clickY = -1;
SDL_Event event;
while (SDL_PollEvent(&event))
{
switch (event.type)
{
case SDL_KEYDOWN:
key_delay = 0;
break;
case SDL_KEYUP:
// If escape is pressed, quit
if (event.key.keysym.sym == SDLK_ESCAPE)
{
FILE* f = fopen("eeprom.save", "wb");
fwrite(__eeprom__storage, sizeof(__eeprom__storage), 1, f);
fclose(f);
exit(0);
}
if (event.key.keysym.sym == SDLK_p)
{
SDL_Surface* tmpSurface = SDL_CreateRGBSurface(SDL_SWSURFACE, 128*SCALE,64*SCALE,32, 0, 0, 0, 0);
SDL_Rect src = {SCALE, SCALE, 128*SCALE,64*SCALE};
SDL_Rect dst = {0, 0, 128*SCALE,64*SCALE};
SDL_BlitSurface(screen, &src, tmpSurface, &dst);
char filename[128];
static int screenshotNr = 0;
sprintf(filename, "screen%i.bmp", screenshotNr);
screenshotNr++;
SDL_SaveBMP(tmpSurface, filename);
SDL_FreeSurface(tmpSurface);
}
break;
case SDL_MOUSEMOTION:
if (event.motion.state)
{
#ifdef ENABLE_ULTILCD2
lcd_lib_encoder_pos_interrupt += event.motion.xrel / 2;
#endif
}
break;
case SDL_MOUSEBUTTONDOWN:
clickX = event.button.x;
clickY = event.button.y;
break;
case SDL_QUIT:
{
FILE* f = fopen("eeprom.save", "wb");
fwrite(__eeprom__storage, sizeof(__eeprom__storage), 1, f);
fclose(f);
exit(0);
}
}
}
Uint8* keys = SDL_GetKeyState(NULL);
writeInput(BTN_ENC, !keys[SDLK_RETURN]);
if (keys[SDLK_RIGHT])
{
if (key_delay == 0)
{
#ifdef ENABLE_ULTILCD2
lcd_lib_encoder_pos_interrupt+=2;
#endif
#ifdef ULTIPANEL
encoderDiff+=2;
#endif
key_delay = KEY_REPEAT_DELAY;
}else
key_delay--;
}
if (keys[SDLK_LEFT])
{
if (key_delay == 0)
{
#ifdef ENABLE_ULTILCD2
lcd_lib_encoder_pos_interrupt-=2;
#endif
#ifdef ULTIPANEL
encoderDiff-=2;
#endif
key_delay = KEY_REPEAT_DELAY;
}else
key_delay--;
}
SDL_FillRect(screen, NULL, 0x000000);
for(unsigned int n=0; n<simComponentList.size(); n++)
simComponentList[n]->doDraw();
SDL_Rect rect;
rect.w = 32;
rect.h = 32;
rect.x = 128 * SCALE + 32;
rect.y = 32;
if (clickX >= rect.x && clickX <= rect.x + rect.w && clickY >= rect.y && clickY <= rect.y + rect.h)
cardInserted = !cardInserted;
SDL_FillRect(screen, &rect, cardInserted ? 0x00FF00 : 0xFF0000);
rect.y += 48;
writeInput(SDCARDDETECT, !cardInserted);
if (clickX >= rect.x && clickX <= rect.x + rect.w && clickY >= rect.y && clickY <= rect.y + rect.h)
stoppedValue = !stoppedValue;
writeInput(SAFETY_TRIGGERED_PIN, stoppedValue);
SDL_FillRect(screen, &rect, stoppedValue ? 0x00FF00 : 0xFF0000);
rect.y += 48;
SDL_Flip(screen);
}
int main(int argc, char *argv[])
{
bool_t analyze_output, equilibria_only;
int niter, nact;
Atom *atom;
Molecule *molecule;
/* --- Read input data and initialize -- -------------- */
setOptions(argc, argv);
getCPU(0, TIME_START, NULL);
SetFPEtraps();
readInput();
spectrum.updateJ = TRUE;
getCPU(1, TIME_START, NULL);
readAtmos(&atmos, &geometry);
if (atmos.Stokes) Bproject();
fillMesh(&geometry);
readAtomicModels();
readMolecularModels();
SortLambda();
getBoundary(&atmos, &geometry);
Background(analyze_output=TRUE, equilibria_only=FALSE);
getProfiles();
initSolution();
initScatter();
getCPU(1, TIME_POLL, "Total initialize");
/* --- Solve radiative transfer for active ingredients -- --------- */
Iterate(input.NmaxIter, input.iterLimit);
adjustStokesMode(atom);
niter = 0;
while (niter < input.NmaxScatter) {
if (solveSpectrum(FALSE, FALSE) <= input.iterLimit) break;
niter++;
}
/* --- Write output files -- ------------------ */
getCPU(1, TIME_START, NULL);
writeInput();
writeAtmos(&atmos);
writeGeometry(&geometry);
writeSpectrum(&spectrum);
writeFlux(FLUX_DOT_OUT);
for (nact = 0; nact < atmos.Nactiveatom; nact++) {
atom = atmos.activeatoms[nact];
writeAtom(atom);
writePopulations(atom);
writeRadRate(atom);
writeCollisionRate(atom);
writeDamping(atom);
}
for (nact = 0; nact < atmos.Nactivemol; nact++) {
molecule = atmos.activemols[nact];
writeMolPops(molecule);
}
writeOpacity();
getCPU(1, TIME_POLL, "Write output");
printTotalCPU();
}
