void init_board()
{
int x,y,z;
memset(register_cube, 0, sizeof(register_cube));
write_led(0, 0,0,0);
/* only flushes one block if unitialized fix */
}
//------------------------------------------------------------------------------
// @fn main
//!
//! Core of "main_can_sensor_node_example.c".
//!
//! This program performs a response to an remote frame of a master.
//! The response is a data frame that contents (in the order) the local
//! temperature, the local luminosity and the local VCC values.
//!
//! @warning - Use DVK90CAN1 board,
//! - Define CAN_BAUDRATE in "config.h".
//!
//! @param none
//!
//! @return Integer 0
//!
//------------------------------------------------------------------------------
int main (void)
{
CLKPR = 0x80; CLKPR = 0x00; //-- Clock prescaler Reset
MCUSR = 0; //-- Clear all reset flags - needed by IAP
audio_init();
led_init(); write_led(MY_ID_TAG); //-- Display MY_ID_TAG on LEDs
can_init(0);
send_sensor_values();
while(1);
return 0;
}
static INT32 pan_ch455_mode_set(struct pan_device *dev)
{
struct pan_ch455_private *tp = (struct pan_ch455_private *)dev->priv;
UINT32 re;
if(re=write_led(tp, SETING_ADDR, tp->mode))
{
PAN_CH455_PRINTF("Mode Set failed! re = %d cnt = %d\n",__FUNCTION__, re);
return re;
}
}
static void
handle_led(hfcusb_data * hfc, int event)
{
hfcsusb_vdata *driver_info =
(hfcsusb_vdata *) hfcusb_idtab[hfc->vend_idx].driver_info;
/* if no scheme -> no LED action */
if (driver_info->led_scheme == LED_OFF)
return;
switch (event) {
case LED_POWER_ON:
set_led_bit(hfc, driver_info->led_bits[0],
0);
set_led_bit(hfc, driver_info->led_bits[1],
1);
set_led_bit(hfc, driver_info->led_bits[2],
1);
set_led_bit(hfc, driver_info->led_bits[3],
1);
break;
case LED_POWER_OFF: /* no Power off handling */
break;
case LED_S0_ON:
set_led_bit(hfc, driver_info->led_bits[1],
0);
break;
case LED_S0_OFF:
set_led_bit(hfc, driver_info->led_bits[1],
1);
break;
case LED_B1_ON:
set_led_bit(hfc, driver_info->led_bits[2],
0);
break;
case LED_B1_OFF:
set_led_bit(hfc, driver_info->led_bits[2],
1);
break;
case LED_B2_ON:
set_led_bit(hfc, driver_info->led_bits[3],
0);
break;
case LED_B2_OFF:
set_led_bit(hfc, driver_info->led_bits[3],
1);
break;
}
write_led(hfc, hfc->led_state);
}
//------------------------------------------------------------------------------
// @fn main
//!
//! Core of "main_interrupt_example.c".
//!
//! Display in decimal on DVK90CAN1 board the seconds, minutes, hours & days
//! given by the Unit declared as RTC.
//! - NO key = seconds
//! - NORTH key = minutes
//! - CENTER key = hours
//! - SOUTH key = days
//!
//! @warning Care on "#define"'s in "config.h".
//!
//! @param none.
//!
//! @return Integer 0
//!
//------------------------------------------------------------------------------
int main (void)
{
U8 temp1, temp2;
asm("cli");
//--- I N I T
// --- Clock prescaler Reset
CLKPR = 0x80; CLKPR = 0x00;
// --- Init LED's & Keys
led_init(); key_init();
// --- Init "SECOND COUNTER"
rtc_int_init();
//--- C O R E O F T H E M A I N
while(1)
{
//- Get display order
switch (get_key_code())
{
case BUTTON_S_CODE: // South for days display
temp1 = rtc_days;
break;
case BUTTON_C_CODE: // Center for hours display
temp1 = rtc_hours;
break;
case BUTTON_N_CODE: // North for minutes display
temp1 = rtc_minutes;
break;
default: // Nothing for seconds display
temp1 = rtc_seconds;
break;
}
//- Display in decimal
temp2 = temp1 % 10;
temp2 |= (temp1/10)<<4;
write_led(temp2);
}
return 0;
}
void put_character(uint8_t c) {
if (c == 'A' || c == 'a') {
write_led(A,LENGTHA);
} else if (c == 'B' || c == 'b') {
write_led(B,LENGTHB);
} else if (c == 'C' || c == 'c') {
write_led(C,LENGTHC);
} else if (c == 'D' || c == 'd') {
write_led(D,LENGTHD);
} else if (c == 'E' || c == 'e') {
write_led(E,LENGTHE);
} else if (c == 'F' || c == 'f') {
write_led(F,LENGTHF);
} else if (c == 'G' || c == 'g') {
write_led(G,LENGTHG);
} else if (c == 'H' || c == 'h') {
write_led(H,LENGTHH);
} else if (c == 'I' || c == 'i') {
write_led(I,LENGTHI);
} else if (c == 'J' || c == 'j') {
write_led(J,LENGTHJ);
} else if (c == 'K' || c == 'k') {
write_led(K,LENGTHK);
} else if (c == 'L' || c == 'l') {
write_led(L,LENGTHL);
} else if (c == 'M' || c == 'm') {
write_led(M,LENGTHM);
} else if (c == 'N' || c == 'n') {
write_led(N,LENGTHN);
} else if (c == 'O' || c == 'o') {
write_led(O,LENGTHO);
} else if (c == 'P' || c == 'p') {
write_led(P,LENGTHP);
} else if (c == 'Q' || c == 'q') {
write_led(Q,LENGTHQ);
} else if (c == 'R' || c == 'r') {
write_led(R,LENGTHR);
} else if (c == 'S' || c == 's') {
write_led(S,LENGTHS);
} else if (c == 'T' || c == 't') {
write_led(T,LENGTHT);
} else if (c == 'U' || c == 'u') {
write_led(U,LENGTHU);
} else if (c == 'V' || c == 'v') {
write_led(V,LENGTHV);
} else if (c == 'W' || c == 'w') {
write_led(W,LENGTHW);
} else if (c == 'X' || c == 'x') {
write_led(X,LENGTHX);
} else if (c == 'Y' || c == 'y') {
write_led(Y,LENGTHY);
} else if (c == 'Z' || c == 'z') {
write_led(Z,LENGTHZ);
} else if (c == ' ') {
write_led(sp,LENGTHSP);
} else if (c == '!') {
write_led(esm,LENGTHESM);
} else if (c == '.') {
write_led(pnt,LENGTHPNT);
} else if (c == '-') {
write_led(min,LENGTHMIN);
} else if (c == '+') {
write_led(plu,LENGTHPLU);
} else if (c == 0x27) {
write_led(apo,LENGTHAPO);
}
write_led(sp,LENGTHSP);
}
void tlc5916_write_led(int led, int on_off){
write_led(led, on_off);
}
