void fillrect (float x1, float y1, float x2, float y2) {
/* (x1,y1) and (x2,y2) are diagonally opposed corners in world coords. */
unsigned int width, height;
int xw1, yw1, xw2, yw2, xl, yt;
if (rect_off_screen(x1,y1,x2,y2))
return;
if (disp_type == SCREEN) {
/* translate to X Windows calling convention. */
xw1 = xcoord(x1);
xw2 = xcoord(x2);
yw1 = ycoord(y1);
yw2 = ycoord(y2);
xl = min(xw1,xw2);
yt = min(yw1,yw2);
width = abs (xw1-xw2);
height = abs (yw1-yw2);
XFillRectangle(display, toplevel, gc, xl, yt, width, height);
}
else {
fprintf(ps,"%.2f %.2f %.2f %.2f fillrect\n",XPOST(x1),YPOST(y1),
XPOST(x2),YPOST(y2));
}
}
MSLPoint3d MSLPoint3d::reflect(const MSLPoint3d& a, const MSLPoint3d& b,
const MSLPoint3d& c) const
{
// reflect point across plane through a, b, and c
double x1 = b.xcoord() - a.xcoord();
double y1 = b.ycoord() - a.ycoord();
double z1 = b.zcoord() - a.zcoord();
double x2 = c.xcoord() - a.xcoord();
double y2 = c.ycoord() - a.ycoord();
double z2 = c.zcoord() - a.zcoord();
double x3 = xcoord() - a.xcoord();
double y3 = ycoord() - a.ycoord();
double z3 = zcoord() - a.zcoord();
double x = (z1*y2-y1*z2);
double y = (x1*z2-z1*x2);
double z = (y1*x2-x1*y2);
if (x == 0 && y == 0 && z == 0)
error_handler(1,"MSLPoint3d::reflect(a,b,c): a,b,c are coplanar");
double f = -2*(x*x3+y*y3+z*z3)/(x*x+y*y+z*z);
return translate(f*x,f*y,f*z);
}
void drawtext (float xc, float yc, char *text, float boundx) {
/* Draws text centered on xc,yc if it fits in boundx */
int len, width, xw_off, yw_off;
len = strlen(text);
width = XTextWidth(font_info[currentfontsize], text, len);
if (width > fabs(boundx*xmult)) return; /* Don't draw if it won't fit */
xw_off = width/(2.*xmult); /* NB: sign doesn't matter. */
/* NB: 2 * descent makes this slightly conservative but simplifies code. */
yw_off = (font_info[currentfontsize]->ascent +
2 * font_info[currentfontsize]->descent)/(2.*ymult);
/* Note: text can be clipped when a little bit of it would be visible *
* right now. Perhaps X doesn't return extremely accurate width and *
* ascent values, etc? Could remove this completely by multiplying *
* xw_off and yw_off by, 1.2 or 1.5. */
if (rect_off_screen(xc-xw_off, yc-yw_off, xc+xw_off, yc+yw_off))
return;
if (disp_type == SCREEN) {
XDrawString(display, toplevel, gc, xcoord(xc)-width/2, ycoord(yc) +
(font_info[currentfontsize]->ascent - font_info[currentfontsize]->descent)/2,
text, len);
}
else {
fprintf(ps,"(%s) %.2f %.2f censhow\n",text,XPOST(xc),YPOST(yc));
}
}
void drawline (float x1, float y1, float x2, float y2) {
/* Draw a line from (x1,y1) to (x2,y2) in the user-drawable area. *
* Coordinates are in world (user) space. */
if (rect_off_screen(x1,y1,x2,y2))
return;
if (disp_type == SCREEN) {
/* Xlib.h prototype has x2 and y1 mixed up. */
XDrawLine(display, toplevel, gc, xcoord(x1), ycoord(y1),
xcoord(x2), ycoord(y2));
}
else {
fprintf(ps,"%.2f %.2f %.2f %.2f drawline\n",XPOST(x1),YPOST(y1),
XPOST(x2),YPOST(y2));
}
}
static void buildMaze(int y, int x)
{
int numOffsets, offset, offsets[4];
while (1) {
numOffsets = 0;
maze[y][x].visited = true;
if (y > 0 && !maze[y - 1][x].visited)
offsets[numOffsets ++] = -width;
if (y < height - 1 && !maze[y + 1][x].visited)
offsets[numOffsets ++] = width;
if (x > 0 && !maze[y][x - 1].visited)
offsets[numOffsets ++] = -1;
if (x < width - 1 && !maze[y][x + 1].visited)
offsets[numOffsets ++] = 1;
if (numOffsets > 0) {
offset = offsets[rand() % numOffsets];
addFirst(dp, offset(x, y));
if (offset == -width) {
maze[y - 1][x].bottom = false;
buildMaze(y - 1, x);
} else if (offset == width) {
maze[y][x].bottom = false;
buildMaze(y + 1, x);
} else if (offset == -1) {
maze[y][x - 1].right = false;
buildMaze(y, x - 1);
} else if (offset == 1) {
maze[y][x].right = false;
buildMaze(y, x + 1);
} else
abort();
} else if (numItems(dp) > 0) {
offset = removeFirst(dp);
x = xcoord(offset);
y = ycoord(offset);
} else
break;
}
maze[height - 1][width - 1].right = false;
}
static void solveMaze(void)
{
int x, y, offset;
for (y = 0; y < height; y ++)
for (x = 0; x < width; x ++)
maze[y][x].visited = false;
y = 0;
x = 0;
while (y != height - 1 || x != width - 1) {
draw(x, y, true);
maze[y][x].visited = true;
if (!maze[y][x].right && !maze[y][x + 1].visited) {
addLast(dp, offset(x + 1, y));
maze[y][x + 1].from = 1;
}
if (!maze[y][x].bottom && !maze[y + 1][x].visited) {
addLast(dp, offset(x, y + 1));
maze[y + 1][x].from = width;
}
if (x > 0 && !maze[y][x - 1].right && !maze[y][x - 1].visited) {
addLast(dp, offset(x - 1, y));
maze[y][x - 1].from = -1;
}
if (y > 0 && !maze[y - 1][x].bottom && !maze[y - 1][x].visited) {
addLast(dp, offset(x, y - 1));
maze[y - 1][x].from = -width;
}
if (getLast(dp) == offset(x, y)) {
draw(x, y, false);
removeLast(dp);
}
offset = getLast(dp);
x = xcoord(offset);
y = ycoord(offset);
}
draw(width - 1, height - 1, true);
}
void fillpoly (t_point *points, int npoints) {
XPoint transpoints[MAXPTS];
int i;
float xmin, ymin, xmax, ymax;
if (npoints > MAXPTS) {
printf("Error in fillpoly: Only %d points allowed per polygon.\n",
MAXPTS);
printf("%d points were requested. Polygon is not drawn.\n",npoints);
return;
}
/* Conservative (but fast) clip test -- check containing rectangle of *
* polygon. */
xmin = xmax = points[0].x;
ymin = ymax = points[0].y;
for (i=1;i<npoints;i++) {
xmin = min (xmin,points[i].x);
xmax = max (xmax,points[i].x);
ymin = min (ymin,points[i].y);
ymax = max (ymax,points[i].y);
}
if (rect_off_screen(xmin,ymin,xmax,ymax))
return;
if (disp_type == SCREEN) {
for (i=0;i<npoints;i++) {
transpoints[i].x = (short) xcoord (points[i].x);
transpoints[i].y = (short) ycoord (points[i].y);
}
XFillPolygon(display, toplevel, gc, transpoints, npoints, Complex,
CoordModeOrigin);
}
else {
fprintf(ps,"\n");
for (i=npoints-1;i>=0;i--)
fprintf (ps, "%.2f %.2f\n", XPOST(points[i].x), YPOST(points[i].y));
fprintf (ps, "%d fillpoly\n", npoints);
}
}
void drawarc (float xc, float yc, float rad, float startang,
float angextent) {
/* Draws a circular arc. X11 can do elliptical arcs quite simply, and *
* PostScript could do them by scaling the coordinate axes. Too much *
* work for now, and probably too complex an object for users to draw *
* much, so I'm just doing circular arcs. Startang is relative to the *
* Window's positive x direction. Angles in degrees. */
int xl, yt;
unsigned int width, height;
/* Conservative (but fast) clip test -- check containing rectangle of *
* a circle. */
if (rect_off_screen (xc-rad,yc-rad,xc+rad,yc+rad))
return;
/* X Windows has trouble with very large angles. (Over 360). *
* Do following to prevent its inaccurate (overflow?) problems. */
if (fabs(angextent) > 360.)
angextent = 360.;
startang = angnorm (startang);
if (disp_type == SCREEN) {
xl = (int) (xcoord(xc) - fabs(xmult*rad));
yt = (int) (ycoord(yc) - fabs(ymult*rad));
width = (unsigned int) (2*fabs(xmult*rad));
height = width;
XDrawArc (display, toplevel, gc, xl, yt, width, height,
(int) (startang*64), (int) (angextent*64));
}
else {
fprintf(ps,"%.2f %.2f %.2f %.2f %.2f %s stroke\n", XPOST(xc),
YPOST(yc), fabs(rad*ps_xmult), startang, startang+angextent,
(angextent < 0) ? "drawarcn" : "drawarc") ;
}
}
void fillarc (float xc, float yc, float rad, float startang,
float angextent) {
/* Fills a circular arc. Startang is relative to the Window's positive x *
* direction. Angles in degrees. */
int xl, yt;
unsigned int width, height;
/* Conservative (but fast) clip test -- check containing rectangle of *
* a circle. */
if (rect_off_screen (xc-rad,yc-rad,xc+rad,yc+rad))
return;
/* X Windows has trouble with very large angles. (Over 360). *
* Do following to prevent its inaccurate (overflow?) problems. */
if (fabs(angextent) > 360.)
angextent = 360.;
startang = angnorm (startang);
if (disp_type == SCREEN) {
xl = (int) (xcoord(xc) - fabs(xmult*rad));
yt = (int) (ycoord(yc) - fabs(ymult*rad));
width = (unsigned int) (2*fabs(xmult*rad));
height = width;
XFillArc (display, toplevel, gc, xl, yt, width, height,
(int) (startang*64), (int) (angextent*64));
}
else {
fprintf(ps,"%.2f %.2f %.2f %.2f %.2f %s\n", fabs(rad*ps_xmult),
startang, startang+angextent, XPOST(xc), YPOST(yc),
(angextent < 0) ? "fillarcn" : "fillarc") ;
}
}
MSLPoint3d MSLPoint3d::reflect(const MSLPoint3d& q) const
{ // reflect point across point q
return MSLPoint3d(2*q.xcoord()-xcoord(), 2*q.ycoord()-ycoord(),
2*q.zcoord()-zcoord());
}
MSLPoint3d MSLPoint3d::translate(double dx, double dy, double dz) const
{ return MSLPoint3d(xcoord()+dx,ycoord()+dy,zcoord()+dz); }
void Viewport::updateYAxis(bool yAxisChanged)
{
// steps on the y-axis (number of labeled values)
const int amount = 10;
/* calculate raw numbers for y-axis */
std::vector<float> ycoord(amount);
float maximum = 0.f;
SharedDataLock ctxlock(ctx->mutex);
float plotmaxval = (*ctx)->maxval;
float plotminval = (*ctx)->minval;
float binscount = (qreal)((*ctx)->nbins);
ctxlock.unlock();
float maxvalue;
float range = 1/zoom;
if (yAxisChanged) {
QPointF bottom(0.f, boundaries.vp);
bottom = modelviewI.map(bottom);
qreal ratio = bottom.y()/binscount;
maxvalue = plotmaxval - (1.f-ratio) * (plotmaxval - plotminval);
if (maxvalue > plotmaxval)
maxvalue = plotmaxval;
} else {
maxvalue = plotmaxval;
}
for (int i = 0; i < amount; ++i) {
ycoord[i] = maxvalue - i*(1.f/(amount-1))*range*(plotmaxval - plotminval);
ycoord[i] = std::max(ycoord[i], plotminval);
maximum = std::max(maximum, std::abs(ycoord[i]));
}
if (maximum == 0.f)
return;
/* find order of magnitude of maximum value */
float roundAt = 0.001f; // we want 3 significant digits
if (maximum >= 1.f) {
do {
maximum *= 0.1f;
roundAt *= 10.f;
} while (maximum >= 1.f);
} else {
while (maximum < 1.f) {
maximum *= 10.f;
roundAt *= 0.1f;
};
}
/* set y-axis strings and find width of y-axis legend */
yaxis.resize(amount);
yaxisWidth = 0;
QFontMetrics fm(font());
for (int i = 0; i < amount; ++i) {
float value = roundAt * std::floor(ycoord[i]/roundAt + 0.5f);
yaxis[i] = QString().setNum(value, 'g', 3);
yaxisWidth = std::max(yaxisWidth, fm.width(yaxis[i]));
}
}
