//
// Method: visitAllocaInst()
//
// Description:
// This method instruments an alloca instruction so that it is zero'ed out
// before any data is loaded from it.
//
void
InitAllocas::visitAllocaInst (AllocaInst & AI) {
//
// Scan for a place to insert the instruction to initialize the
// allocated memory.
//
Instruction * InsertPt = getInsertionPoint (AI);
//
// Zero the alloca with a memset. If this is done more efficiently with stores
// SelectionDAG will lower it appropriately based on target information.
//
TargetData & TD = getAnalysis<TargetData>();
//
// Get various types that we'll need.
//
Type * Int1Type = IntegerType::getInt1Ty(AI.getContext());
Type * Int8Type = IntegerType::getInt8Ty(AI.getContext());
Type * Int32Type = IntegerType::getInt32Ty(AI.getContext());
Type * VoidPtrType = getVoidPtrType (AI.getContext());
Type * AllocType = AI.getAllocatedType();
//
// Create a call to memset.
//
Module * M = AI.getParent()->getParent()->getParent();
Function * Memset = cast<Function>(M->getFunction ("llvm.memset.p0i8.i32"));
std::vector<Value *> args;
args.push_back (castTo (&AI, VoidPtrType, AI.getName().str(), InsertPt));
args.push_back (ConstantInt::get(Int8Type, 0));
args.push_back (ConstantInt::get(Int32Type,TD.getTypeAllocSize(AllocType)));
args.push_back (ConstantInt::get(Int32Type,
TD.getABITypeAlignment(AllocType)));
args.push_back (ConstantInt::get(Int1Type, 0));
CallInst::Create (Memset, args, "", InsertPt);
//
// Update statistics.
//
++InitedAllocas;
return;
}
/// InlineFunction - This function inlines the called function into the basic
/// block of the caller. This returns false if it is not possible to inline
/// this call. The program is still in a well defined state if this occurs
/// though.
///
/// Note that this only does one level of inlining. For example, if the
/// instruction 'call B' is inlined, and 'B' calls 'C', then the call to 'C' now
/// exists in the instruction stream. Similarly this will inline a recursive
/// function by one level.
bool llvm::InlineFunction(CallSite CS, InlineFunctionInfo &IFI,
bool InsertLifetime) {
Instruction *TheCall = CS.getInstruction();
assert(TheCall->getParent() && TheCall->getParent()->getParent() &&
"Instruction not in function!");
// If IFI has any state in it, zap it before we fill it in.
IFI.reset();
const Function *CalledFunc = CS.getCalledFunction();
if (CalledFunc == 0 || // Can't inline external function or indirect
CalledFunc->isDeclaration() || // call, or call to a vararg function!
CalledFunc->getFunctionType()->isVarArg()) return false;
// If the call to the callee is not a tail call, we must clear the 'tail'
// flags on any calls that we inline.
bool MustClearTailCallFlags =
!(isa<CallInst>(TheCall) && cast<CallInst>(TheCall)->isTailCall());
// If the call to the callee cannot throw, set the 'nounwind' flag on any
// calls that we inline.
bool MarkNoUnwind = CS.doesNotThrow();
BasicBlock *OrigBB = TheCall->getParent();
Function *Caller = OrigBB->getParent();
// GC poses two hazards to inlining, which only occur when the callee has GC:
// 1. If the caller has no GC, then the callee's GC must be propagated to the
// caller.
// 2. If the caller has a differing GC, it is invalid to inline.
if (CalledFunc->hasGC()) {
if (!Caller->hasGC())
Caller->setGC(CalledFunc->getGC());
else if (CalledFunc->getGC() != Caller->getGC())
return false;
}
// Get the personality function from the callee if it contains a landing pad.
Value *CalleePersonality = 0;
for (Function::const_iterator I = CalledFunc->begin(), E = CalledFunc->end();
I != E; ++I)
if (const InvokeInst *II = dyn_cast<InvokeInst>(I->getTerminator())) {
const BasicBlock *BB = II->getUnwindDest();
const LandingPadInst *LP = BB->getLandingPadInst();
CalleePersonality = LP->getPersonalityFn();
break;
}
// Find the personality function used by the landing pads of the caller. If it
// exists, then check to see that it matches the personality function used in
// the callee.
if (CalleePersonality) {
for (Function::const_iterator I = Caller->begin(), E = Caller->end();
I != E; ++I)
if (const InvokeInst *II = dyn_cast<InvokeInst>(I->getTerminator())) {
const BasicBlock *BB = II->getUnwindDest();
const LandingPadInst *LP = BB->getLandingPadInst();
// If the personality functions match, then we can perform the
// inlining. Otherwise, we can't inline.
// TODO: This isn't 100% true. Some personality functions are proper
// supersets of others and can be used in place of the other.
if (LP->getPersonalityFn() != CalleePersonality)
return false;
break;
}
}
// Get an iterator to the last basic block in the function, which will have
// the new function inlined after it.
Function::iterator LastBlock = &Caller->back();
// Make sure to capture all of the return instructions from the cloned
// function.
SmallVector<ReturnInst*, 8> Returns;
ClonedCodeInfo InlinedFunctionInfo;
Function::iterator FirstNewBlock;
{ // Scope to destroy VMap after cloning.
ValueToValueMapTy VMap;
assert(CalledFunc->arg_size() == CS.arg_size() &&
"No varargs calls can be inlined!");
// Calculate the vector of arguments to pass into the function cloner, which
// matches up the formal to the actual argument values.
CallSite::arg_iterator AI = CS.arg_begin();
unsigned ArgNo = 0;
for (Function::const_arg_iterator I = CalledFunc->arg_begin(),
E = CalledFunc->arg_end(); I != E; ++I, ++AI, ++ArgNo) {
Value *ActualArg = *AI;
const Argument *Arg = I;
// When byval arguments actually inlined, we need to make the copy implied
// by them explicit. However, we don't do this if the callee is readonly
// or readnone, because the copy would be unneeded: the callee doesn't
// modify the struct.
if (CS.isByValArgument(ArgNo)) {
ActualArg = HandleByValArgument(ActualArg, Arg, TheCall, CalledFunc, IFI,
CalledFunc->getParamAlignment(ArgNo+1));
// Calls that we inline may use the new alloca, so we need to clear
// their 'tail' flags if HandleByValArgument introduced a new alloca and
// the callee has calls.
MustClearTailCallFlags |= ActualArg != *AI;
}
VMap[I] = ActualArg;
}
// We want the inliner to prune the code as it copies. We would LOVE to
// have no dead or constant instructions leftover after inlining occurs
// (which can happen, e.g., because an argument was constant), but we'll be
// happy with whatever the cloner can do.
CloneAndPruneFunctionInto(Caller, CalledFunc, VMap,
/*ModuleLevelChanges=*/false, Returns, ".i",
&InlinedFunctionInfo, IFI.TD, TheCall);
// Remember the first block that is newly cloned over.
FirstNewBlock = LastBlock; ++FirstNewBlock;
// Update the callgraph if requested.
if (IFI.CG)
UpdateCallGraphAfterInlining(CS, FirstNewBlock, VMap, IFI);
// Update inlined instructions' line number information.
fixupLineNumbers(Caller, FirstNewBlock, TheCall);
}
// If there are any alloca instructions in the block that used to be the entry
// block for the callee, move them to the entry block of the caller. First
// calculate which instruction they should be inserted before. We insert the
// instructions at the end of the current alloca list.
{
BasicBlock::iterator InsertPoint = Caller->begin()->begin();
for (BasicBlock::iterator I = FirstNewBlock->begin(),
E = FirstNewBlock->end(); I != E; ) {
AllocaInst *AI = dyn_cast<AllocaInst>(I++);
if (AI == 0) continue;
// If the alloca is now dead, remove it. This often occurs due to code
// specialization.
if (AI->use_empty()) {
AI->eraseFromParent();
continue;
}
if (!isa<Constant>(AI->getArraySize()))
continue;
// Keep track of the static allocas that we inline into the caller.
IFI.StaticAllocas.push_back(AI);
// Scan for the block of allocas that we can move over, and move them
// all at once.
while (isa<AllocaInst>(I) &&
isa<Constant>(cast<AllocaInst>(I)->getArraySize())) {
IFI.StaticAllocas.push_back(cast<AllocaInst>(I));
++I;
}
// Transfer all of the allocas over in a block. Using splice means
// that the instructions aren't removed from the symbol table, then
// reinserted.
Caller->getEntryBlock().getInstList().splice(InsertPoint,
FirstNewBlock->getInstList(),
AI, I);
}
}
// Leave lifetime markers for the static alloca's, scoping them to the
// function we just inlined.
if (InsertLifetime && !IFI.StaticAllocas.empty()) {
IRBuilder<> builder(FirstNewBlock->begin());
for (unsigned ai = 0, ae = IFI.StaticAllocas.size(); ai != ae; ++ai) {
AllocaInst *AI = IFI.StaticAllocas[ai];
// If the alloca is already scoped to something smaller than the whole
// function then there's no need to add redundant, less accurate markers.
if (hasLifetimeMarkers(AI))
continue;
// Try to determine the size of the allocation.
ConstantInt *AllocaSize = 0;
if (ConstantInt *AIArraySize =
dyn_cast<ConstantInt>(AI->getArraySize())) {
if (IFI.TD) {
Type *AllocaType = AI->getAllocatedType();
uint64_t AllocaTypeSize = IFI.TD->getTypeAllocSize(AllocaType);
uint64_t AllocaArraySize = AIArraySize->getLimitedValue();
assert(AllocaArraySize > 0 && "array size of AllocaInst is zero");
// Check that array size doesn't saturate uint64_t and doesn't
// overflow when it's multiplied by type size.
if (AllocaArraySize != ~0ULL &&
UINT64_MAX / AllocaArraySize >= AllocaTypeSize) {
AllocaSize = ConstantInt::get(Type::getInt64Ty(AI->getContext()),
AllocaArraySize * AllocaTypeSize);
}
}
}
builder.CreateLifetimeStart(AI, AllocaSize);
for (unsigned ri = 0, re = Returns.size(); ri != re; ++ri) {
IRBuilder<> builder(Returns[ri]);
builder.CreateLifetimeEnd(AI, AllocaSize);
}
}
}
// If the inlined code contained dynamic alloca instructions, wrap the inlined
// code with llvm.stacksave/llvm.stackrestore intrinsics.
if (InlinedFunctionInfo.ContainsDynamicAllocas) {
Module *M = Caller->getParent();
// Get the two intrinsics we care about.
Function *StackSave = Intrinsic::getDeclaration(M, Intrinsic::stacksave);
Function *StackRestore=Intrinsic::getDeclaration(M,Intrinsic::stackrestore);
// Insert the llvm.stacksave.
CallInst *SavedPtr = IRBuilder<>(FirstNewBlock, FirstNewBlock->begin())
.CreateCall(StackSave, "savedstack");
// Insert a call to llvm.stackrestore before any return instructions in the
// inlined function.
for (unsigned i = 0, e = Returns.size(); i != e; ++i) {
IRBuilder<>(Returns[i]).CreateCall(StackRestore, SavedPtr);
}
}
// If we are inlining tail call instruction through a call site that isn't
// marked 'tail', we must remove the tail marker for any calls in the inlined
// code. Also, calls inlined through a 'nounwind' call site should be marked
// 'nounwind'.
if (InlinedFunctionInfo.ContainsCalls &&
(MustClearTailCallFlags || MarkNoUnwind)) {
for (Function::iterator BB = FirstNewBlock, E = Caller->end();
BB != E; ++BB)
for (BasicBlock::iterator I = BB->begin(), E = BB->end(); I != E; ++I)
if (CallInst *CI = dyn_cast<CallInst>(I)) {
if (MustClearTailCallFlags)
CI->setTailCall(false);
if (MarkNoUnwind)
CI->setDoesNotThrow();
}
}
// If we are inlining for an invoke instruction, we must make sure to rewrite
// any call instructions into invoke instructions.
if (InvokeInst *II = dyn_cast<InvokeInst>(TheCall))
HandleInlinedInvoke(II, FirstNewBlock, InlinedFunctionInfo);
// If we cloned in _exactly one_ basic block, and if that block ends in a
// return instruction, we splice the body of the inlined callee directly into
// the calling basic block.
if (Returns.size() == 1 && std::distance(FirstNewBlock, Caller->end()) == 1) {
// Move all of the instructions right before the call.
OrigBB->getInstList().splice(TheCall, FirstNewBlock->getInstList(),
FirstNewBlock->begin(), FirstNewBlock->end());
// Remove the cloned basic block.
Caller->getBasicBlockList().pop_back();
// If the call site was an invoke instruction, add a branch to the normal
// destination.
if (InvokeInst *II = dyn_cast<InvokeInst>(TheCall)) {
BranchInst *NewBr = BranchInst::Create(II->getNormalDest(), TheCall);
NewBr->setDebugLoc(Returns[0]->getDebugLoc());
}
// If the return instruction returned a value, replace uses of the call with
// uses of the returned value.
if (!TheCall->use_empty()) {
ReturnInst *R = Returns[0];
if (TheCall == R->getReturnValue())
TheCall->replaceAllUsesWith(UndefValue::get(TheCall->getType()));
else
TheCall->replaceAllUsesWith(R->getReturnValue());
}
// Since we are now done with the Call/Invoke, we can delete it.
TheCall->eraseFromParent();
// Since we are now done with the return instruction, delete it also.
Returns[0]->eraseFromParent();
// We are now done with the inlining.
return true;
}
// Otherwise, we have the normal case, of more than one block to inline or
// multiple return sites.
// We want to clone the entire callee function into the hole between the
// "starter" and "ender" blocks. How we accomplish this depends on whether
// this is an invoke instruction or a call instruction.
BasicBlock *AfterCallBB;
BranchInst *CreatedBranchToNormalDest = NULL;
if (InvokeInst *II = dyn_cast<InvokeInst>(TheCall)) {
// Add an unconditional branch to make this look like the CallInst case...
CreatedBranchToNormalDest = BranchInst::Create(II->getNormalDest(), TheCall);
// Split the basic block. This guarantees that no PHI nodes will have to be
// updated due to new incoming edges, and make the invoke case more
// symmetric to the call case.
AfterCallBB = OrigBB->splitBasicBlock(CreatedBranchToNormalDest,
CalledFunc->getName()+".exit");
} else { // It's a call
// If this is a call instruction, we need to split the basic block that
// the call lives in.
//
AfterCallBB = OrigBB->splitBasicBlock(TheCall,
CalledFunc->getName()+".exit");
}
// Change the branch that used to go to AfterCallBB to branch to the first
// basic block of the inlined function.
//
TerminatorInst *Br = OrigBB->getTerminator();
assert(Br && Br->getOpcode() == Instruction::Br &&
"splitBasicBlock broken!");
Br->setOperand(0, FirstNewBlock);
// Now that the function is correct, make it a little bit nicer. In
// particular, move the basic blocks inserted from the end of the function
// into the space made by splitting the source basic block.
Caller->getBasicBlockList().splice(AfterCallBB, Caller->getBasicBlockList(),
FirstNewBlock, Caller->end());
// Handle all of the return instructions that we just cloned in, and eliminate
// any users of the original call/invoke instruction.
Type *RTy = CalledFunc->getReturnType();
PHINode *PHI = 0;
if (Returns.size() > 1) {
// The PHI node should go at the front of the new basic block to merge all
// possible incoming values.
if (!TheCall->use_empty()) {
PHI = PHINode::Create(RTy, Returns.size(), TheCall->getName(),
AfterCallBB->begin());
// Anything that used the result of the function call should now use the
// PHI node as their operand.
TheCall->replaceAllUsesWith(PHI);
}
// Loop over all of the return instructions adding entries to the PHI node
// as appropriate.
if (PHI) {
for (unsigned i = 0, e = Returns.size(); i != e; ++i) {
ReturnInst *RI = Returns[i];
assert(RI->getReturnValue()->getType() == PHI->getType() &&
"Ret value not consistent in function!");
PHI->addIncoming(RI->getReturnValue(), RI->getParent());
}
}
// Add a branch to the merge points and remove return instructions.
DebugLoc Loc;
for (unsigned i = 0, e = Returns.size(); i != e; ++i) {
ReturnInst *RI = Returns[i];
BranchInst* BI = BranchInst::Create(AfterCallBB, RI);
Loc = RI->getDebugLoc();
BI->setDebugLoc(Loc);
RI->eraseFromParent();
}
// We need to set the debug location to *somewhere* inside the
// inlined function. The line number may be nonsensical, but the
// instruction will at least be associated with the right
// function.
if (CreatedBranchToNormalDest)
CreatedBranchToNormalDest->setDebugLoc(Loc);
} else if (!Returns.empty()) {
// Otherwise, if there is exactly one return value, just replace anything
// using the return value of the call with the computed value.
if (!TheCall->use_empty()) {
if (TheCall == Returns[0]->getReturnValue())
TheCall->replaceAllUsesWith(UndefValue::get(TheCall->getType()));
else
TheCall->replaceAllUsesWith(Returns[0]->getReturnValue());
}
// Update PHI nodes that use the ReturnBB to use the AfterCallBB.
BasicBlock *ReturnBB = Returns[0]->getParent();
ReturnBB->replaceAllUsesWith(AfterCallBB);
// Splice the code from the return block into the block that it will return
// to, which contains the code that was after the call.
AfterCallBB->getInstList().splice(AfterCallBB->begin(),
ReturnBB->getInstList());
if (CreatedBranchToNormalDest)
CreatedBranchToNormalDest->setDebugLoc(Returns[0]->getDebugLoc());
// Delete the return instruction now and empty ReturnBB now.
Returns[0]->eraseFromParent();
ReturnBB->eraseFromParent();
} else if (!TheCall->use_empty()) {
// No returns, but something is using the return value of the call. Just
// nuke the result.
TheCall->replaceAllUsesWith(UndefValue::get(TheCall->getType()));
}
// Since we are now done with the Call/Invoke, we can delete it.
TheCall->eraseFromParent();
// We should always be able to fold the entry block of the function into the
// single predecessor of the block...
assert(cast<BranchInst>(Br)->isUnconditional() && "splitBasicBlock broken!");
BasicBlock *CalleeEntry = cast<BranchInst>(Br)->getSuccessor(0);
// Splice the code entry block into calling block, right before the
// unconditional branch.
CalleeEntry->replaceAllUsesWith(OrigBB); // Update PHI nodes
OrigBB->getInstList().splice(Br, CalleeEntry->getInstList());
// Remove the unconditional branch.
OrigBB->getInstList().erase(Br);
// Now we can remove the CalleeEntry block, which is now empty.
Caller->getBasicBlockList().erase(CalleeEntry);
// If we inserted a phi node, check to see if it has a single value (e.g. all
// the entries are the same or undef). If so, remove the PHI so it doesn't
// block other optimizations.
if (PHI) {
if (Value *V = SimplifyInstruction(PHI, IFI.TD)) {
PHI->replaceAllUsesWith(V);
PHI->eraseFromParent();
}
}
return true;
}
/// If it is possible to inline the specified call site,
/// do so and update the CallGraph for this operation.
///
/// This function also does some basic book-keeping to update the IR. The
/// InlinedArrayAllocas map keeps track of any allocas that are already
/// available from other functions inlined into the caller. If we are able to
/// inline this call site we attempt to reuse already available allocas or add
/// any new allocas to the set if not possible.
static bool InlineCallIfPossible(Pass &P, CallSite CS, InlineFunctionInfo &IFI,
InlinedArrayAllocasTy &InlinedArrayAllocas,
int InlineHistory, bool InsertLifetime) {
Function *Callee = CS.getCalledFunction();
Function *Caller = CS.getCaller();
// We need to manually construct BasicAA directly in order to disable
// its use of other function analyses.
BasicAAResult BAR(createLegacyPMBasicAAResult(P, *Callee));
// Construct our own AA results for this function. We do this manually to
// work around the limitations of the legacy pass manager.
AAResults AAR(createLegacyPMAAResults(P, *Callee, BAR));
// Try to inline the function. Get the list of static allocas that were
// inlined.
if (!InlineFunction(CS, IFI, &AAR, InsertLifetime))
return false;
AttributeFuncs::mergeAttributesForInlining(*Caller, *Callee);
// Look at all of the allocas that we inlined through this call site. If we
// have already inlined other allocas through other calls into this function,
// then we know that they have disjoint lifetimes and that we can merge them.
//
// There are many heuristics possible for merging these allocas, and the
// different options have different tradeoffs. One thing that we *really*
// don't want to hurt is SRoA: once inlining happens, often allocas are no
// longer address taken and so they can be promoted.
//
// Our "solution" for that is to only merge allocas whose outermost type is an
// array type. These are usually not promoted because someone is using a
// variable index into them. These are also often the most important ones to
// merge.
//
// A better solution would be to have real memory lifetime markers in the IR
// and not have the inliner do any merging of allocas at all. This would
// allow the backend to do proper stack slot coloring of all allocas that
// *actually make it to the backend*, which is really what we want.
//
// Because we don't have this information, we do this simple and useful hack.
//
SmallPtrSet<AllocaInst*, 16> UsedAllocas;
// When processing our SCC, check to see if CS was inlined from some other
// call site. For example, if we're processing "A" in this code:
// A() { B() }
// B() { x = alloca ... C() }
// C() { y = alloca ... }
// Assume that C was not inlined into B initially, and so we're processing A
// and decide to inline B into A. Doing this makes an alloca available for
// reuse and makes a callsite (C) available for inlining. When we process
// the C call site we don't want to do any alloca merging between X and Y
// because their scopes are not disjoint. We could make this smarter by
// keeping track of the inline history for each alloca in the
// InlinedArrayAllocas but this isn't likely to be a significant win.
if (InlineHistory != -1) // Only do merging for top-level call sites in SCC.
return true;
// Loop over all the allocas we have so far and see if they can be merged with
// a previously inlined alloca. If not, remember that we had it.
for (unsigned AllocaNo = 0, e = IFI.StaticAllocas.size();
AllocaNo != e; ++AllocaNo) {
AllocaInst *AI = IFI.StaticAllocas[AllocaNo];
// Don't bother trying to merge array allocations (they will usually be
// canonicalized to be an allocation *of* an array), or allocations whose
// type is not itself an array (because we're afraid of pessimizing SRoA).
ArrayType *ATy = dyn_cast<ArrayType>(AI->getAllocatedType());
if (!ATy || AI->isArrayAllocation())
continue;
// Get the list of all available allocas for this array type.
std::vector<AllocaInst*> &AllocasForType = InlinedArrayAllocas[ATy];
// Loop over the allocas in AllocasForType to see if we can reuse one. Note
// that we have to be careful not to reuse the same "available" alloca for
// multiple different allocas that we just inlined, we use the 'UsedAllocas'
// set to keep track of which "available" allocas are being used by this
// function. Also, AllocasForType can be empty of course!
bool MergedAwayAlloca = false;
for (AllocaInst *AvailableAlloca : AllocasForType) {
unsigned Align1 = AI->getAlignment(),
Align2 = AvailableAlloca->getAlignment();
// The available alloca has to be in the right function, not in some other
// function in this SCC.
if (AvailableAlloca->getParent() != AI->getParent())
continue;
// If the inlined function already uses this alloca then we can't reuse
// it.
if (!UsedAllocas.insert(AvailableAlloca).second)
continue;
// Otherwise, we *can* reuse it, RAUW AI into AvailableAlloca and declare
// success!
DEBUG(dbgs() << " ***MERGED ALLOCA: " << *AI << "\n\t\tINTO: "
<< *AvailableAlloca << '\n');
// Move affected dbg.declare calls immediately after the new alloca to
// avoid the situation when a dbg.declare preceeds its alloca.
if (auto *L = LocalAsMetadata::getIfExists(AI))
if (auto *MDV = MetadataAsValue::getIfExists(AI->getContext(), L))
for (User *U : MDV->users())
if (DbgDeclareInst *DDI = dyn_cast<DbgDeclareInst>(U))
DDI->moveBefore(AvailableAlloca->getNextNode());
AI->replaceAllUsesWith(AvailableAlloca);
if (Align1 != Align2) {
if (!Align1 || !Align2) {
const DataLayout &DL = Caller->getParent()->getDataLayout();
unsigned TypeAlign = DL.getABITypeAlignment(AI->getAllocatedType());
Align1 = Align1 ? Align1 : TypeAlign;
Align2 = Align2 ? Align2 : TypeAlign;
}
if (Align1 > Align2)
AvailableAlloca->setAlignment(AI->getAlignment());
}
AI->eraseFromParent();
MergedAwayAlloca = true;
++NumMergedAllocas;
IFI.StaticAllocas[AllocaNo] = nullptr;
break;
}
// If we already nuked the alloca, we're done with it.
if (MergedAwayAlloca)
continue;
// If we were unable to merge away the alloca either because there are no
// allocas of the right type available or because we reused them all
// already, remember that this alloca came from an inlined function and mark
// it used so we don't reuse it for other allocas from this inline
// operation.
AllocasForType.push_back(AI);
UsedAllocas.insert(AI);
}
return true;
}
/// Look at all of the allocas that we inlined through this call site. If we
/// have already inlined other allocas through other calls into this function,
/// then we know that they have disjoint lifetimes and that we can merge them.
///
/// There are many heuristics possible for merging these allocas, and the
/// different options have different tradeoffs. One thing that we *really*
/// don't want to hurt is SRoA: once inlining happens, often allocas are no
/// longer address taken and so they can be promoted.
///
/// Our "solution" for that is to only merge allocas whose outermost type is an
/// array type. These are usually not promoted because someone is using a
/// variable index into them. These are also often the most important ones to
/// merge.
///
/// A better solution would be to have real memory lifetime markers in the IR
/// and not have the inliner do any merging of allocas at all. This would
/// allow the backend to do proper stack slot coloring of all allocas that
/// *actually make it to the backend*, which is really what we want.
///
/// Because we don't have this information, we do this simple and useful hack.
static void mergeInlinedArrayAllocas(
Function *Caller, InlineFunctionInfo &IFI,
InlinedArrayAllocasTy &InlinedArrayAllocas, int InlineHistory) {
SmallPtrSet<AllocaInst *, 16> UsedAllocas;
// When processing our SCC, check to see if CS was inlined from some other
// call site. For example, if we're processing "A" in this code:
// A() { B() }
// B() { x = alloca ... C() }
// C() { y = alloca ... }
// Assume that C was not inlined into B initially, and so we're processing A
// and decide to inline B into A. Doing this makes an alloca available for
// reuse and makes a callsite (C) available for inlining. When we process
// the C call site we don't want to do any alloca merging between X and Y
// because their scopes are not disjoint. We could make this smarter by
// keeping track of the inline history for each alloca in the
// InlinedArrayAllocas but this isn't likely to be a significant win.
if (InlineHistory != -1) // Only do merging for top-level call sites in SCC.
return;
// Loop over all the allocas we have so far and see if they can be merged with
// a previously inlined alloca. If not, remember that we had it.
for (unsigned AllocaNo = 0, e = IFI.StaticAllocas.size(); AllocaNo != e;
++AllocaNo) {
AllocaInst *AI = IFI.StaticAllocas[AllocaNo];
// Don't bother trying to merge array allocations (they will usually be
// canonicalized to be an allocation *of* an array), or allocations whose
// type is not itself an array (because we're afraid of pessimizing SRoA).
ArrayType *ATy = dyn_cast<ArrayType>(AI->getAllocatedType());
if (!ATy || AI->isArrayAllocation())
continue;
// Get the list of all available allocas for this array type.
std::vector<AllocaInst *> &AllocasForType = InlinedArrayAllocas[ATy];
// Loop over the allocas in AllocasForType to see if we can reuse one. Note
// that we have to be careful not to reuse the same "available" alloca for
// multiple different allocas that we just inlined, we use the 'UsedAllocas'
// set to keep track of which "available" allocas are being used by this
// function. Also, AllocasForType can be empty of course!
bool MergedAwayAlloca = false;
for (AllocaInst *AvailableAlloca : AllocasForType) {
unsigned Align1 = AI->getAlignment(),
Align2 = AvailableAlloca->getAlignment();
// The available alloca has to be in the right function, not in some other
// function in this SCC.
if (AvailableAlloca->getParent() != AI->getParent())
continue;
// If the inlined function already uses this alloca then we can't reuse
// it.
if (!UsedAllocas.insert(AvailableAlloca).second)
continue;
// Otherwise, we *can* reuse it, RAUW AI into AvailableAlloca and declare
// success!
LLVM_DEBUG(dbgs() << " ***MERGED ALLOCA: " << *AI
<< "\n\t\tINTO: " << *AvailableAlloca << '\n');
// Move affected dbg.declare calls immediately after the new alloca to
// avoid the situation when a dbg.declare precedes its alloca.
if (auto *L = LocalAsMetadata::getIfExists(AI))
if (auto *MDV = MetadataAsValue::getIfExists(AI->getContext(), L))
for (User *U : MDV->users())
if (DbgDeclareInst *DDI = dyn_cast<DbgDeclareInst>(U))
DDI->moveBefore(AvailableAlloca->getNextNode());
AI->replaceAllUsesWith(AvailableAlloca);
if (Align1 != Align2) {
if (!Align1 || !Align2) {
const DataLayout &DL = Caller->getParent()->getDataLayout();
unsigned TypeAlign = DL.getABITypeAlignment(AI->getAllocatedType());
Align1 = Align1 ? Align1 : TypeAlign;
Align2 = Align2 ? Align2 : TypeAlign;
}
if (Align1 > Align2)
AvailableAlloca->setAlignment(AI->getAlignment());
}
AI->eraseFromParent();
MergedAwayAlloca = true;
++NumMergedAllocas;
IFI.StaticAllocas[AllocaNo] = nullptr;
break;
}
// If we already nuked the alloca, we're done with it.
if (MergedAwayAlloca)
continue;
// If we were unable to merge away the alloca either because there are no
// allocas of the right type available or because we reused them all
// already, remember that this alloca came from an inlined function and mark
// it used so we don't reuse it for other allocas from this inline
// operation.
AllocasForType.push_back(AI);
UsedAllocas.insert(AI);
}
}
