int PCB_EDIT_FRAME::OnHotkeyCopyItem()
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return 0;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return 0;
SetCurItem( item );
int eventId = 0;
switch( item->Type() )
{
case PCB_TEXT_T:
eventId = ID_POPUP_PCB_COPY_TEXTEPCB;
break;
default:
eventId = 0;
break;
}
return eventId;
}
bool PCB_EDIT_FRAME::OnHotkeyPlaceItem( wxDC* aDC )
{
BOARD_ITEM* item = GetCurItem();
bool no_tool = GetToolId() == ID_NO_TOOL_SELECTED;
bool itemCurrentlyEdited = item && item->GetFlags();
m_canvas->SetAutoPanRequest( false );
if( itemCurrentlyEdited )
{
m_canvas->SetIgnoreMouseEvents( true );
m_canvas->CrossHairOff( aDC );
switch( item->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( item->IsDragging() )
PlaceDraggedOrMovedTrackSegment( static_cast<TRACK*>( item ), aDC );
break;
case PCB_TEXT_T:
Place_Texte_Pcb( static_cast<TEXTE_PCB*>( item ), aDC );
break;
case PCB_MODULE_TEXT_T:
PlaceTexteModule( static_cast<TEXTE_MODULE*>( item ), aDC );
break;
case PCB_PAD_T:
PlacePad( static_cast<D_PAD*>( item ), aDC );
break;
case PCB_MODULE_T:
PlaceModule( static_cast<MODULE*>( item ), aDC );
break;
case PCB_TARGET_T:
PlaceTarget( static_cast<PCB_TARGET*>( item ), aDC );
break;
case PCB_LINE_T:
if( no_tool ) // when no tools: existing item moving.
Place_DrawItem( static_cast<DRAWSEGMENT*>( item ), aDC );
break;
default:
break;
}
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->CrossHairOn( aDC );
return true;
}
return false;
}
bool FOOTPRINT_EDIT_FRAME::OnHotkeyEditItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
bool blockActive = GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE;
if( itemCurrentlyEdited || blockActive )
return false;
item = ModeditLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; // Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case PCB_MODULE_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MODULE_PRMS;
break;
case PCB_PAD_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_PAD;
break;
case PCB_MODULE_TEXT_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTMODULE;
break;
case PCB_MODULE_EDGE_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_MODEDIT_EDIT_BODY_ITEM;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
wxPostEvent( this, evt );
return true;
}
return false;
}
bool PCB_EDIT_FRAME::OnHotkeyRotateItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
int evt_type = 0; // Used to post a wxCommandEvent on demand
wxASSERT( aIdCommand == HK_ROTATE_ITEM );
// Allows block rotate operation on hot key.
if( GetScreen()->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
evt_type = ID_POPUP_ROTATE_BLOCK;
}
else
{
if( !itemCurrentlyEdited )
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
switch( item->Type() )
{
case PCB_MODULE_T:
evt_type = ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE;
break;
case PCB_TEXT_T:
evt_type = ID_POPUP_PCB_ROTATE_TEXTEPCB;
break;
case PCB_MODULE_TEXT_T:
evt_type = ID_POPUP_PCB_ROTATE_TEXTMODULE;
break;
default:
break;
}
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
return true;
}
return false;
}
/*
* Called on a mouse left button double click
*/
void FOOTPRINT_EDIT_FRAME::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = ModeditLocateAndDisplay();
}
if( ( item == NULL ) || ( item->GetFlags() != 0 ) )
break;
// Item found
SetCurItem( item );
OnEditItemRequest( DC, item );
break; // end case 0
case ID_PCB_ADD_LINE_BUTT:
{
if( item && item->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
}
default:
break;
}
}
int EDIT_TOOL::Properties( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
// Shall the selection be cleared at the end?
bool unselect = selection.Empty();
if( !hoverSelection( false ) )
return 0;
// Tracks & vias are treated in a special way:
if( ( SELECTION_CONDITIONS::OnlyTypes( GENERAL_COLLECTOR::Tracks ) )( selection ) )
{
DIALOG_TRACK_VIA_PROPERTIES dlg( editFrame, selection );
if( dlg.ShowModal() )
{
dlg.Apply( *m_commit );
m_commit->Push( _( "Edit track/via properties" ) );
}
}
else if( selection.Size() == 1 ) // Properties are displayed when there is only one item selected
{
// Display properties dialog
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 );
// Some of properties dialogs alter pointers, so we should deselect them
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
// Store flags, so they can be restored later
STATUS_FLAGS flags = item->GetFlags();
item->ClearFlags();
// Do not handle undo buffer, it is done by the properties dialogs @todo LEGACY
// Display properties dialog provided by the legacy canvas frame
editFrame->OnEditItemRequest( NULL, item );
m_toolMgr->RunAction( COMMON_ACTIONS::editModifiedSelection, true );
item->SetFlags( flags );
}
if( unselect )
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
return 0;
}
int EDIT_TOOL::Properties( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
if( !hoverSelection( selection, false ) )
return 0;
// Properties are displayed when there is only one item selected
if( selection.Size() == 1 )
{
// Display properties dialog
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 );
std::vector<PICKED_ITEMS_LIST*>& undoList = editFrame->GetScreen()->m_UndoList.m_CommandsList;
// Some of properties dialogs alter pointers, so we should deselect them
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
STATUS_FLAGS flags = item->GetFlags();
item->ClearFlags();
// It is necessary to determine if anything has changed
PICKED_ITEMS_LIST* lastChange = undoList.empty() ? NULL : undoList.back();
// Display properties dialog
editFrame->OnEditItemRequest( NULL, item );
PICKED_ITEMS_LIST* currentChange = undoList.empty() ? NULL : undoList.back();
if( lastChange != currentChange ) // Something has changed
{
processChanges( currentChange );
updateRatsnest( true );
getModel<BOARD>()->GetRatsnest()->Recalculate();
item->ViewUpdate();
m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true );
}
item->SetFlags( flags );
}
return 0;
}
bool PCB_EDIT_FRAME::OnHotkeyMoveItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; // Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TRACK_NODE;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_TRACK_SEGMENT;
if( aIdCommand == HK_DRAG_TRACK_KEEP_SLOPE )
evt_type = ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE;
break;
case PCB_MODULE_T:
{
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MODULE_REQUEST;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_MODULE_REQUEST;
}
break;
case PCB_PAD_T:
// Post MODULE_REQUEST events here to prevent pads
// from being moved or dragged by hotkeys.
// Process_Special_Functions takes care of finding
// the parent.
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MODULE_REQUEST;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_MODULE_REQUEST;
break;
case PCB_TEXT_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST;
break;
case PCB_TARGET_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_PCB_TARGET_REQUEST;
break;
case PCB_ZONE_AREA_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_ZONE_OUTLINES;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT;
break;
case PCB_MODULE_TEXT_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST;
break;
case PCB_LINE_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_DRAWING_REQUEST;
break;
case PCB_DIMENSION_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
return true;
}
return false;
}
/* handle the double click on the mouse left button
*/
void PCB_EDIT_FRAME::OnLeftDClick( wxDC* aDC, const wxPoint& aPosition )
{
BOARD_ITEM* DrawStruct = GetCurItem();
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() != 0) )
break;
SendMessageToEESCHEMA( DrawStruct );
// An item is found
SetCurItem( DrawStruct );
switch( DrawStruct->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( DrawStruct->IsNew() )
{
if( End_Route( (TRACK*) DrawStruct, aDC ) )
m_canvas->SetAutoPanRequest( false );
}
else if( DrawStruct->GetFlags() == 0 )
{
Edit_TrackSegm_Width( aDC, (TRACK*) DrawStruct );
}
break;
case PCB_TEXT_T:
case PCB_PAD_T:
case PCB_MODULE_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
case PCB_MODULE_TEXT_T:
OnEditItemRequest( aDC, DrawStruct );
m_canvas->MoveCursorToCrossHair();
break;
case PCB_LINE_T:
OnEditItemRequest( aDC, DrawStruct );
break;
case PCB_ZONE_AREA_T:
if( DrawStruct->GetFlags() )
break;
OnEditItemRequest( aDC, DrawStruct );
break;
default:
break;
}
break; // end case 0
case ID_TRACK_BUTT:
if( DrawStruct && DrawStruct->IsNew() )
{
if( End_Route( (TRACK*) DrawStruct, aDC ) )
m_canvas->SetAutoPanRequest( false );
}
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
if( End_Zone( aDC ) )
{
m_canvas->SetAutoPanRequest( false );
SetCurItem( NULL );
}
break;
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_CIRCLE_BUTT:
if( DrawStruct == NULL )
break;
if( DrawStruct->Type() != PCB_LINE_T )
{
DisplayError( this, wxT( "DrawStruct Type error" ) );
m_canvas->SetAutoPanRequest( false );
break;
}
if( DrawStruct->IsNew() )
{
End_Edge( (DRAWSEGMENT*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
SetCurItem( NULL );
}
break;
}
}
bool PCB_EDIT_FRAME::OnHotkeyEditItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; //Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( aIdCommand == HK_EDIT_ITEM )
{
// Be sure the corresponding netclass is selected before edit:
SetCurrentNetClass( ( (BOARD_CONNECTED_ITEM*)item )->GetNetClassName() );
evt_type = ID_POPUP_PCB_EDIT_TRACKSEG;
}
break;
case PCB_TEXT_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTEPCB;
break;
case PCB_MODULE_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MODULE_PRMS;
else if( aIdCommand == HK_EDIT_MODULE_WITH_MODEDIT )
evt_type = ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT;
break;
case PCB_PAD_T:
// Until dec 2012 a EDIT_MODULE event is posted here to prevent pads
// from being edited by hotkeys.
// Process_Special_Functions takes care of finding the parent.
// After dec 2012 a EDIT_PAD event is posted, because there is no
// reason to not allow pad edit by hotkey
// (pad coordinates are no more modified by rounding, in nanometer version
// when using inches or mm in dialog)
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_PAD;
break;
case PCB_TARGET_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_PCB_TARGET;
break;
case PCB_DIMENSION_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_DIMENSION;
break;
case PCB_MODULE_TEXT_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTMODULE;
break;
case PCB_LINE_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_DRAWING;
break;
case PCB_ZONE_AREA_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_ZONE_PARAMS;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
return true;
}
return false;
}
bool PCB_EDIT_FRAME::OnHotkeyDeleteItem( wxDC* aDC )
{
BOARD_ITEM* item = GetCurItem();
bool ItemFree = (item == NULL) || (item->GetFlags() == 0);
switch( GetToolId() )
{
case ID_TRACK_BUTT:
if( !IsCopperLayer ( GetActiveLayer() ) )
return false;
if( ItemFree )
{
item = PcbGeneralLocateAndDisplay();
if( item && !item->IsTrack() )
return false;
Delete_Track( aDC, (TRACK*) item );
}
else if( item->IsTrack( ) )
{
// simple lines for debugger:
TRACK* track = (TRACK*) item;
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
return true;
}
break;
case ID_PCB_MODULE_BUTT:
if( ItemFree )
{
wxPoint pos = RefPos( false );
MODULE* module = GetBoard()->GetFootprint( pos, UNDEFINED_LAYER, false );
if( module == NULL || module->IsLocked() )
return false;
RemoveStruct( module, aDC );
}
else
return false;
break;
default:
if( ItemFree )
{
item = PcbGeneralLocateAndDisplay();
// Shouldn't there be a check for locked tracks and vias here?
if( item == NULL || (item->Type() == PCB_MODULE_T && (MODULE*)item->IsLocked()) )
return false;
RemoveStruct( item, aDC );
}
else
return false;
}
OnModify();
SetCurItem( NULL );
return true;
}
bool PCB_EDIT_FRAME::OnHotkeyDuplicateOrArrayItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; // Used to post a wxCommandEvent on demand
bool canDuplicate = true;
switch( item->Type() )
{
// Only handle items we know we can handle
case PCB_PAD_T:
canDuplicate = false;
// no break
case PCB_MODULE_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TRACE_T:
case PCB_ZONE_AREA_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
switch( aIdCommand )
{
case HK_CREATE_ARRAY:
if( canDuplicate )
evt_type = ID_POPUP_PCB_CREATE_ARRAY;
break;
case HK_DUPLICATE_ITEM_AND_INCREMENT:
if( canDuplicate )
evt_type = ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT;
break;
case HK_DUPLICATE_ITEM:
if( canDuplicate )
evt_type = ID_POPUP_PCB_DUPLICATE_ITEM;
break;
case HK_MOVE_ITEM_EXACT:
evt_type = ID_POPUP_PCB_MOVE_EXACT;
break;
default:
// We don't handle other commands here
break;
}
break;
default:
evt_type = 0;
break;
}
return PostCommandMenuEvent( evt_type );
}
int EDIT_TOOL::Properties( const TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
// Shall the selection be cleared at the end?
bool unselect = selection.Empty();
if( !hoverSelection( selection, false ) )
return 0;
// Tracks & vias are treated in a special way:
if( ( SELECTION_CONDITIONS::OnlyTypes( m_tracksViasType ) )( selection ) )
{
DIALOG_TRACK_VIA_PROPERTIES dlg( editFrame, selection );
if( dlg.ShowModal() )
{
RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest();
editFrame->OnModify();
editFrame->SaveCopyInUndoList( selection.items, UR_CHANGED );
dlg.Apply();
selection.ForAll<KIGFX::VIEW_ITEM>( boost::bind( &KIGFX::VIEW_ITEM::ViewUpdate, _1,
KIGFX::VIEW_ITEM::ALL ) );
selection.ForAll<BOARD_ITEM>( boost::bind( &RN_DATA::Update, ratsnest, _1 ) );
ratsnest->Recalculate();
}
}
else if( selection.Size() == 1 ) // Properties are displayed when there is only one item selected
{
// Display properties dialog
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 );
// Store the head of the undo list to compare if anything has changed
std::vector<PICKED_ITEMS_LIST*>& undoList = editFrame->GetScreen()->m_UndoList.m_CommandsList;
// Some of properties dialogs alter pointers, so we should deselect them
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
STATUS_FLAGS flags = item->GetFlags();
item->ClearFlags();
// It is necessary to determine if anything has changed, so store the current undo save point
PICKED_ITEMS_LIST* undoSavePoint = undoList.empty() ? NULL : undoList.back();
// Display properties dialog provided by the legacy canvas frame
editFrame->OnEditItemRequest( NULL, item );
if( !undoList.empty() && undoList.back() != undoSavePoint ) // Undo buffer has changed
{
// Process changes stored after undoSavePoint
processUndoBuffer( undoSavePoint );
// Update the modified item
item->ViewUpdate();
RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest();
ratsnest->Recalculate();
// TODO OBSERVER! I miss you so much..
m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true );
}
item->SetFlags( flags );
}
if( unselect )
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
return 0;
}
/*
* Called on a mouse left button double click
*/
void FOOTPRINT_EDIT_FRAME::OnLeftDClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = ModeditLocateAndDisplay();
}
if( ( item == NULL ) || ( item->GetFlags() != 0 ) )
break;
// Item found
SetCurItem( item );
switch( item->Type() )
{
case PCB_PAD_T:
InstallPadOptionsFrame( (D_PAD*) item );
m_canvas->MoveCursorToCrossHair();
break;
case PCB_MODULE_T:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) item );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case PCB_MODULE_TEXT_T:
InstallTextModOptionsFrame( (TEXTE_MODULE*) item, DC );
m_canvas->MoveCursorToCrossHair();
break;
case PCB_MODULE_EDGE_T :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) item );
m_canvas->Refresh();
break;
default:
break;
}
break; // end case 0
case ID_PCB_ADD_LINE_BUTT:
{
if( item && item->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
}
default:
break;
}
}
bool FOOTPRINT_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotKey, const wxPoint& aPosition,
EDA_ITEM* aItem )
{
if( aHotKey == 0 )
return false;
bool blockActive = GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE;
BOARD_ITEM* item = GetCurItem();
bool ItemFree = (item == 0) || (item->GetFlags() == 0);
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
/* Convert lower to upper case (the usual toupper function has problem with non ascii
* codes like function keys */
if( (aHotKey >= 'a') && (aHotKey <= 'z') )
aHotKey += 'A' - 'a';
EDA_HOTKEY* HK_Descr = GetDescriptorFromHotkey( aHotKey, common_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotKey, module_edit_Hotkey_List );
if( HK_Descr == NULL )
return false;
switch( HK_Descr->m_Idcommand )
{
default:
case HK_NOT_FOUND:
return false;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Module_Editor_Hokeys_Descr );
break;
case HK_RESET_LOCAL_COORD: // set local (relative) coordinate origin
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_SET_GRID_ORIGIN:
SetGridOrigin( GetCrossHairPosition() );
m_canvas->Refresh();
break;
case HK_RESET_GRID_ORIGIN:
SetGridOrigin( wxPoint(0,0) );
m_canvas->Refresh();
break;
case HK_SWITCH_UNITS:
cmd.SetId( (g_UserUnit == INCHES) ?
ID_TB_OPTIONS_SELECT_UNIT_MM : ID_TB_OPTIONS_SELECT_UNIT_INCH );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_IN:
cmd.SetId( ID_POPUP_ZOOM_IN );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_OUT:
cmd.SetId( ID_POPUP_ZOOM_OUT );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_REDRAW:
cmd.SetId( ID_ZOOM_REDRAW );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_ZOOM_CENTER:
cmd.SetId( ID_POPUP_ZOOM_CENTER );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_UNDO:
case HK_REDO:
if( ItemFree && !blockActive )
{
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED, HK_Descr->m_IdMenuEvent );
wxPostEvent( this, event );
}
break;
case HK_ZOOM_AUTO:
cmd.SetId( ID_ZOOM_PAGE );
GetEventHandler()->ProcessEvent( cmd );
break;
case HK_EDIT_ITEM:
OnHotkeyEditItem( HK_EDIT_ITEM );
break;
case HK_DELETE:
OnHotkeyDeleteItem( HK_DELETE );
break;
case HK_MOVE_ITEM:
OnHotkeyMoveItem( HK_MOVE_ITEM );
break;
case HK_ROTATE_ITEM:
OnHotkeyRotateItem( HK_ROTATE_ITEM );
break;
}
return true;
}
bool PCB_EDIT_FRAME::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu )
{
wxString msg;
STATUS_FLAGS flags = 0;
bool trackFound = false; // Flag set to true,
// if a track is being the cursor, to avoid
// to display menus relative to tracks twice
bool blockActive = !GetScreen()->m_BlockLocate.IsIdle();
BOARD_ITEM* item = GetCurItem();
m_canvas->SetCanStartBlock( -1 ); // Avoid to start a block command when clicking on menu
// If a command or a block is in progress:
// Put the Cancel command (if needed) and the End command
if( blockActive )
{
createPopUpBlockMenu( aPopMenu );
aPopMenu->AppendSeparator();
return true;
}
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
}
else
{
AddMenuItem( aPopMenu, ID_POPUP_CLOSE_CURRENT_TOOL,
_( "End Tool" ), KiBitmap( cursor_xpm ) );
}
aPopMenu->AppendSeparator();
}
else
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), KiBitmap( cancel_xpm ) );
aPopMenu->AppendSeparator();
}
}
// Select a proper item
wxPoint cursorPos = GetCrossHairPosition();
wxPoint selectPos = m_Collector->GetRefPos();
selectPos = GetNearestGridPosition( selectPos );
/* We can reselect another item only if there are no item being edited
* because ALL moving functions use GetCurItem(), therefore GetCurItem()
* must return the same item during moving. We know an item is moving
* if( item && (item->m_Flags != 0)) is true and after calling
* PcbGeneralLocateAndDisplay(), GetCurItem() is any arbitrary BOARD_ITEM,
* not the current item being edited. In such case we cannot call
* PcbGeneralLocateAndDisplay().
*/
if( !item || (item->GetFlags() == 0) )
{
// show the "item selector" menu if no item selected or
// if there is a selected item but the mouse has moved
// (therefore a new item is perhaps under the cursor)
if( !item || cursorPos != selectPos )
{
m_canvas->SetAbortRequest( false );
PcbGeneralLocateAndDisplay();
if( m_canvas->GetAbortRequest() )
{
return false;
}
}
}
item = GetCurItem();
flags = item ? item->GetFlags() : 0;
// Add the context menu, which depends on the picked item:
if( item )
{
switch( item->Type() )
{
case PCB_MODULE_T:
createPopUpMenuForFootprints( (MODULE*) item, aPopMenu );
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
aPopMenu->AppendSeparator();
if( !( (MODULE*) item )->IsLocked() )
{
msg = AddHotkeyName( _("Lock Footprint" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, msg,
KiBitmap( locked_xpm ) );
}
else
{
msg = AddHotkeyName( _( "Unlock Footprint" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, msg,
KiBitmap( unlocked_xpm ) );
}
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE,
_( "Automatically Place Footprint" ) );
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE,
_( "Automatically Route Footprint" ) );
}
break;
case PCB_PAD_T:
createPopUpMenuForFpPads( static_cast<D_PAD*>( item ), aPopMenu );
break;
case PCB_MODULE_TEXT_T:
createPopUpMenuForFpTexts( static_cast<TEXTE_MODULE*>( item ), aPopMenu );
break;
case PCB_LINE_T: // Some graphic items on technical layers
if( (flags & IS_NEW) )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING,
_( "End Drawing" ), KiBitmap( checked_ok_xpm ) );
}
if( !flags )
{
msg = AddHotkeyName( _( "Move Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST,
msg, KiBitmap( move_xpm ) );
msg = AddHotkeyName( _( "Duplicate Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_line_xpm ) );
msg = AddHotkeyName( _("Move Drawing Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_line_xpm ) );
msg = AddHotkeyName( _("Create Drawing Array" ), g_Board_Editor_Hokeys_Descr,
HK_CREATE_ARRAY );
AddMenuItem( aPopMenu, ID_POPUP_PCB_CREATE_ARRAY,
msg, KiBitmap( array_line_xpm ) );
msg = AddHotkeyName( _( "Edit Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DRAWING,
msg, KiBitmap( edit_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING,
_( "Delete Drawing" ), KiBitmap( delete_xpm ) );
if( !IsCopperLayer( item->GetLayer() ) )
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING_LAYER,
_( "Delete All Drawings on Layer" ), KiBitmap( delete_xpm ) );
}
break;
case PCB_ZONE_T: // Item used to fill a zone
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE,
_( "Delete Zone Filling" ), KiBitmap( delete_xpm ) );
break;
case PCB_ZONE_AREA_T: // Item used to handle a zone area (outlines, holes ...)
if( flags & IS_NEW )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_( "Close Zone Outline" ), KiBitmap( checked_ok_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER,
_( "Delete Last Corner" ), KiBitmap( delete_xpm ) );
}
else
{
createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu );
}
break;
case PCB_TEXT_T:
createPopUpMenuForTexts( (TEXTE_PCB*) item, aPopMenu );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
trackFound = true;
createPopupMenuForTracks( (TRACK*) item, aPopMenu );
break;
case PCB_MARKER_T:
createPopUpMenuForMarkers( (MARKER_PCB*) item, aPopMenu );
break;
case PCB_DIMENSION_T:
if( !flags )
{
msg = AddHotkeyName( _( "Edit Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DIMENSION, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Move Dimension Text" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Duplicate Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_text_xpm ) );
msg = AddHotkeyName( _("Move Dimension Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Delete Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DIMENSION,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_TARGET_T:
if( !flags )
{
msg = AddHotkeyName( _( "Move Target" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST,
msg, KiBitmap( move_target_xpm ) );
msg = AddHotkeyName( _("Move Target Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_target_xpm ) );
msg = AddHotkeyName( _( "Duplicate Target" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_target_xpm ) );
msg = AddHotkeyName( _("Create Target Array" ), g_Board_Editor_Hokeys_Descr,
HK_CREATE_ARRAY );
AddMenuItem( aPopMenu, ID_POPUP_PCB_CREATE_ARRAY,
msg, KiBitmap( array_target_xpm ) );
msg = AddHotkeyName( _( "Edit Target" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_MIRE, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Delete Target" ), g_Board_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_MIRE,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_MODULE_EDGE_T:
case SCREEN_T:
case TYPE_NOT_INIT:
case PCB_T:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unexpected DrawType %d" ),
item->Type() );
wxMessageBox( msg );
SetCurItem( NULL );
break;
default:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unknown DrawType %d" ),
item->Type() );
wxMessageBox( msg );
// Attempt to clear error (but should no occurs )
if( item->Type() >= MAX_STRUCT_TYPE_ID )
SetCurItem( NULL );
break;
}
aPopMenu->AppendSeparator();
}
if( !flags )
{
msg = AddHotkeyName( _( "Get and Move Footprint" ),
g_Board_Editor_Hokeys_Descr, HK_GET_AND_MOVE_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST,
msg, KiBitmap( move_module_xpm ) );
}
// Display context sensitive commands:
switch( GetToolId() )
{
case ID_PCB_ZONES_BUTT:
if( GetBoard()->m_ZoneDescriptorList.size() > 0 )
{
aPopMenu->AppendSeparator();
msg = AddHotkeyName( _( "Fill or Refill All Zones" ),
g_Board_Editor_Hokeys_Descr, HK_ZONE_FILL_OR_REFILL );
AddMenuItem( aPopMenu, ID_POPUP_PCB_FILL_ALL_ZONES,
msg, KiBitmap( fill_zone_xpm ) );
msg = AddHotkeyName( _( "Remove Filled Areas in All Zones" ),
g_Board_Editor_Hokeys_Descr, HK_ZONE_REMOVE_FILLED );
AddMenuItem( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES,
msg, KiBitmap( zone_unfill_xpm ) );
aPopMenu->AppendSeparator();
}
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_KEEPOUT_AREA_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_TRACK_BUTT:
if ( ! trackFound ) // This menu is already added when a track is located
{
aPopMenu->AppendSeparator();
msg = AddHotkeyName( _( "Begin Track" ),
g_Board_Editor_Hokeys_Descr, HK_ADD_NEW_TRACK );
AddMenuItem( aPopMenu, ID_POPUP_PCB_BEGIN_TRACK,
msg, KiBitmap( add_tracks_xpm ) );
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair for Vias" ), KiBitmap( select_layer_pair_xpm ) );
aPopMenu->AppendSeparator();
}
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_TEXT_BUTT:
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_DIMENSION_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_MODULE_BUTT:
if( !flags )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC,
_( "Footprint Documentation" ), KiBitmap( book_xpm ) );
aPopMenu->AppendSeparator();
}
break;
case ID_NO_TOOL_SELECTED:
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
wxMenu* commands = new wxMenu;
AddMenuItem( aPopMenu, commands, ID_POPUP_PCB_AUTOPLACE_COMMANDS,
_( "Global Spread and Place" ), KiBitmap( move_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES,
_( "Unlock All Footprints" ), KiBitmap( unlocked_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES,
_( "Lock All Footprints" ), KiBitmap( locked_xpm ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_SPREAD_ALL_MODULES,
_( "Spread out All Footprints" ), KiBitmap( move_xpm ) );
commands->Append( ID_POPUP_PCB_SPREAD_NEW_MODULES,
_( "Spread out Footprints not Already on Board" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES,
_( "Automatically Place All Footprints" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES,
_( "Automatically Place New Footprints" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE,
_( "Automatically Place Next Footprints" ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_REORIENT_ALL_MODULES,
_( "Orient All Footprints" ), KiBitmap( rotate_module_cw_xpm ) );
aPopMenu->AppendSeparator();
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
wxMenu* commands = new wxMenu;
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_COMMANDS, _( "Autoroute" ), commands );
AddMenuItem( commands, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair" ), KiBitmap( select_layer_pair_xpm ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES,
_( "Automatically Route All Footprints" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _( "Reset Unrouted" ) );
aPopMenu->AppendSeparator();
}
if( !trackFound )
{
msg = AddHotkeyName( _( "Begin Track" ), g_Board_Editor_Hokeys_Descr, HK_ADD_NEW_TRACK );
AddMenuItem( aPopMenu, ID_POPUP_PCB_BEGIN_TRACK, msg, KiBitmap( add_tracks_xpm ) );
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
}
break;
}
return true;
}
/**
* Function Magnetize
* tests to see if there are any magnetic items within near reach of the given
* "curpos". If yes, then curpos is adjusted appropriately according to that
* near magnetic item and true is returned.
* @param frame = the current frame
* @param aCurrentTool = the current tool id (from vertical right toolbar)
* @param aGridSize = the current grid size
* @param on_grid = the on grid position near initial position ( often on_grid = curpos)
* @param curpos The initial position, and what to adjust if a change is needed.
* @return bool - true if the position was adjusted magnetically, else false.
*/
bool Magnetize( PCB_EDIT_FRAME* frame, int aCurrentTool, wxSize aGridSize,
wxPoint on_grid, wxPoint* curpos )
{
bool doCheckNet = g_MagneticPadOption != capture_always && g_Drc_On;
bool doTrack = false;
bool doPad = false;
bool amMovingVia = false;
BOARD* m_Pcb = frame->GetBoard();
TRACK* currTrack = g_CurrentTrackSegment;
BOARD_ITEM* currItem = frame->GetCurItem();
PCB_SCREEN* screen = frame->GetScreen();
wxPoint pos = frame->RefPos( true );
// D( printf( "currTrack=%p currItem=%p currTrack->Type()=%d currItem->Type()=%d\n", currTrack, currItem, currTrack ? currTrack->Type() : 0, currItem ? currItem->Type() : 0 ); )
if( !currTrack && currItem && currItem->Type()==PCB_VIA_T && currItem->GetFlags() )
{
// moving a VIA
currTrack = (TRACK*) currItem;
amMovingVia = true;
return false; // comment this return out and play with it.
}
else if( currItem != currTrack )
{
currTrack = NULL;
}
if( g_MagneticPadOption == capture_always )
doPad = true;
if( g_MagneticTrackOption == capture_always )
doTrack = true;
if( aCurrentTool == ID_TRACK_BUTT || amMovingVia )
{
int q = capture_cursor_in_track_tool;
if( g_MagneticPadOption == q )
doPad = true;
if( g_MagneticTrackOption == q )
doTrack = true;
}
// D(printf("doPad=%d doTrack=%d aCurrentTool=%d amMovingVia=%d\n", doPad, doTrack, aCurrentTool, amMovingVia );)
// The search precedence order is pads, then tracks/vias
if( doPad )
{
LSET layer_mask( screen->m_Active_Layer );
D_PAD* pad = m_Pcb->GetPad( pos, layer_mask );
if( pad )
{
if( doCheckNet && currTrack && currTrack->GetNetCode() != pad->GetNetCode() )
return false;
*curpos = pad->GetPosition();
return true;
}
}
// after pads, only track & via tests remain, skip them if not desired
if( doTrack )
{
LAYER_ID layer = screen->m_Active_Layer;
for( TRACK* via = m_Pcb->m_Track;
via && (via = via->GetVia( *curpos, layer )) != NULL;
via = via->Next() )
{
if( via != currTrack ) // a via cannot influence itself
{
if( !doCheckNet || !currTrack || currTrack->GetNetCode() == via->GetNetCode() )
{
*curpos = via->GetStart();
// D(printf("via hit\n");)
return true;
}
}
}
if( !currTrack )
{
LSET layers( layer );
TRACK* track = m_Pcb->GetVisibleTrack( m_Pcb->m_Track, pos, layers );
if( !track || track->Type() != PCB_TRACE_T )
{
// D(printf("!currTrack and track=%p not found, layer_mask=0x%X\n", track, layer_mask );)
return false;
}
// D( printf( "Project\n" ); )
return Project( curpos, on_grid, track );
}
/*
* In two segment mode, ignore the final segment if it's inside a grid square.
*/
if( !amMovingVia && currTrack && g_TwoSegmentTrackBuild && currTrack->Back()
&& currTrack->GetStart().x - aGridSize.x < currTrack->GetEnd().x
&& currTrack->GetStart().x + aGridSize.x > currTrack->GetEnd().x
&& currTrack->GetStart().y - aGridSize.y < currTrack->GetEnd().y
&& currTrack->GetStart().y + aGridSize.y > currTrack->GetEnd().y )
{
currTrack = currTrack->Back();
}
for( TRACK* track = m_Pcb->m_Track; track; track = track->Next() )
{
if( track->Type() != PCB_TRACE_T )
continue;
if( doCheckNet && currTrack && currTrack->GetNetCode() != track->GetNetCode() )
continue;
if( m_Pcb->IsLayerVisible( track->GetLayer() ) == false )
continue;
// omit the layer check if moving a via
if( !amMovingVia && !track->IsOnLayer( layer ) )
continue;
if( !track->HitTest( *curpos ) )
continue;
// D(printf( "have track prospect\n");)
if( Join( curpos, track->GetStart(), track->GetEnd(), currTrack->GetStart(), currTrack->GetEnd() ) )
{
// D(printf( "join currTrack->Type()=%d\n", currTrack->Type() );)
return true;
}
if( aCurrentTool == ID_TRACK_BUTT || amMovingVia )
{
// At this point we have a drawing mouse on a track, we are drawing
// a new track and that new track is parallel to the track the
// mouse is on. Find the nearest end point of the track under mouse
// to the mouse and return that.
double distStart = GetLineLength( *curpos, track->GetStart() );
double distEnd = GetLineLength( *curpos, track->GetEnd() );
// if track not via, or if its a via dragging but not with its adjacent track
if( currTrack->Type() != PCB_VIA_T ||
( currTrack->GetStart() != track->GetStart() && currTrack->GetStart() != track->GetEnd() ))
{
double max_dist = currTrack->GetWidth() / 2.0f;
if( distStart <= max_dist )
{
// D(printf("nearest end is start\n");)
*curpos = track->GetStart();
return true;
}
if( distEnd <= max_dist )
{
// D(printf("nearest end is end\n");)
*curpos = track->GetEnd();
return true;
}
// @todo otherwise confine curpos such that it stays centered within "track"
}
}
}
}
return false;
}
void FOOTPRINT_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
m_canvas->CrossHairOff( DC );
if( GetToolId() == ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() ) // Move item command in progress
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
PlaceTexteModule( static_cast<TEXTE_MODULE*>( item ), DC );
break;
case PCB_MODULE_EDGE_T:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Place_EdgeMod( static_cast<EDGE_MODULE*>( item ) );
break;
case PCB_PAD_T:
PlacePad( static_cast<D_PAD*>( item ), DC );
break;
default:
{
wxString msg;
msg.Printf( wxT( "WinEDA_ModEditFrame::OnLeftClick err:Struct %d, m_Flag %X" ),
item->Type(), item->GetFlags() );
DisplayError( this, msg );
item->ClearFlags();
break;
}
}
}
else
{
if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT )
&& !wxGetKeyState( WXK_CONTROL ) )
item = ModeditLocateAndDisplay();
SetCurItem( item );
}
}
item = GetCurItem();
bool no_item_edited = item == NULL || item->GetFlags() == 0;
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_MODEDIT_CIRCLE_TOOL:
case ID_MODEDIT_ARC_TOOL:
case ID_MODEDIT_LINE_TOOL:
if( no_item_edited )
{
STROKE_T shape = S_SEGMENT;
if( GetToolId() == ID_MODEDIT_CIRCLE_TOOL )
shape = S_CIRCLE;
if( GetToolId() == ID_MODEDIT_ARC_TOOL )
shape = S_ARC;
SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) NULL, DC, shape ) );
}
else if( item->IsNew() )
{
if( ( (EDGE_MODULE*) item )->GetShape() == S_CIRCLE )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_ARC )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_SEGMENT )
{
SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) item, DC, S_SEGMENT ) );
}
else
{
wxMessageBox( wxT( "ProcessCommand error: unknown shape" ) );
}
}
break;
case ID_MODEDIT_DELETE_TOOL:
if( ! no_item_edited ) // Item in edit, cannot delete it
break;
item = ModeditLocateAndDisplay();
if( item && item->Type() != PCB_MODULE_T ) // Cannot delete the module itself
{
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
RemoveStruct( item );
SetCurItem( NULL );
}
break;
case ID_MODEDIT_ANCHOR_TOOL:
{
MODULE* module = GetBoard()->m_Modules;
if( module == NULL // No module loaded
|| (module->GetFlags() != 0) )
break;
SaveCopyInUndoList( module, UR_MODEDIT );
// set the new relative internal local coordinates of footprint items
wxPoint moveVector = module->GetPosition() - GetCrossHairPosition();
module->MoveAnchorPosition( moveVector );
// Usually, we do not need to change twice the anchor position,
// so deselect the active tool
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
case ID_MODEDIT_PLACE_GRID_COORD:
m_canvas->DrawGridAxis( DC, GR_XOR, GetBoard()->GetGridOrigin() );
SetGridOrigin( GetCrossHairPosition() );
m_canvas->DrawGridAxis( DC, GR_COPY, GetBoard()->GetGridOrigin() );
GetScreen()->SetModify();
break;
case ID_MODEDIT_TEXT_TOOL:
if( GetBoard()->m_Modules == NULL )
break;
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
CreateTextModule( GetBoard()->m_Modules, DC );
break;
case ID_MODEDIT_PAD_TOOL:
if( GetBoard()->m_Modules )
{
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
AddPad( GetBoard()->m_Modules, true );
}
break;
default:
DisplayError( this, wxT( "FOOTPRINT_EDIT_FRAME::ProcessCommand error" ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
m_canvas->CrossHairOn( DC );
}
bool FOOTPRINT_EDIT_FRAME::OnRightClick( const wxPoint& MousePos, wxMenu* PopMenu )
{
BOARD_ITEM* item = GetCurItem();
wxString msg;
bool blockActive = !GetScreen()->m_BlockLocate.IsIdle();
// Simple location of elements where possible.
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
SetCurItem( item = ModeditLocateAndDisplay() );
}
// End command in progress.
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
AddMenuItem( PopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
else
AddMenuItem( PopMenu, ID_POPUP_CLOSE_CURRENT_TOOL, _( "End Tool" ),
KiBitmap( cursor_xpm ) );
PopMenu->AppendSeparator();
}
else
{
if( (item && item->GetFlags()) || blockActive )
{
if( blockActive ) // Put block commands in list
{
AddMenuItem( PopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel Block" ), KiBitmap( cancel_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_ZOOM_BLOCK,
_( "Zoom Block (drag middle mouse)" ),
KiBitmap( zoom_area_xpm ) );
PopMenu->AppendSeparator();
AddMenuItem( PopMenu, ID_POPUP_PLACE_BLOCK,
_( "Place Block" ), KiBitmap( checked_ok_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_COPY_BLOCK,
_( "Copy Block (shift + drag mouse)" ),
KiBitmap( copyblock_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_MIRROR_X_BLOCK,
_( "Mirror Block (alt + drag mouse)" ),
KiBitmap( mirror_h_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_ROTATE_BLOCK,
_( "Rotate Block (ctrl + drag mouse)" ),
KiBitmap( rotate_ccw_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_DELETE_BLOCK,
_( "Delete Block (shift+ctrl + drag mouse)" ),
KiBitmap( delete_xpm ) );
}
else
{
AddMenuItem( PopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), KiBitmap( cancel_xpm ) );
}
PopMenu->AppendSeparator();
}
}
if( blockActive )
return true;
if( item )
{
STATUS_FLAGS flags = item->GetFlags();
switch( item->Type() )
{
case PCB_MODULE_T:
{
wxMenu* transform_choice = new wxMenu;
AddMenuItem( transform_choice, ID_MODEDIT_MODULE_ROTATE, _( "Rotate" ),
KiBitmap( rotate_module_ccw_xpm ) );
AddMenuItem( transform_choice, ID_MODEDIT_MODULE_MIRROR, _( "Mirror" ),
KiBitmap( mirror_footprint_axisY_xpm ) );
msg = AddHotkeyName( _( "Edit Module" ), g_Module_Editor_Hokeys_Descr, HK_EDIT_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_EDIT_MODULE_PRMS, msg, KiBitmap( edit_module_xpm ) );
AddMenuItem( PopMenu, transform_choice, ID_MODEDIT_TRANSFORM_MODULE,
_( "Transform Module" ), KiBitmap( edit_xpm ) );
break;
}
case PCB_PAD_T:
if( !flags )
{
msg = AddHotkeyName( _("Move Pad" ), g_Module_Editor_Hokeys_Descr, HK_MOVE_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_MOVE_PAD_REQUEST, msg, KiBitmap( move_pad_xpm ) );
}
msg = AddHotkeyName( _("Edit Pad" ), g_Module_Editor_Hokeys_Descr, HK_EDIT_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_EDIT_PAD, msg, KiBitmap( options_pad_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_PCB_IMPORT_PAD_SETTINGS,
_( "New Pad Settings" ), KiBitmap( options_new_pad_xpm ) );
AddMenuItem( PopMenu, ID_POPUP_PCB_EXPORT_PAD_SETTINGS,
_( "Export Pad Settings" ), KiBitmap( export_options_pad_xpm ) );
msg = AddHotkeyName( _("Delete Pad" ), g_Module_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( PopMenu, ID_POPUP_PCB_DELETE_PAD, msg, KiBitmap( delete_pad_xpm ) );
if( !flags )
{
PopMenu->AppendSeparator();
AddMenuItem( PopMenu, ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS,
_( "Global Pad Settings" ), KiBitmap( global_options_pad_xpm ) );
}
break;
case PCB_MODULE_TEXT_T:
if( !flags )
{
msg = AddHotkeyName( _("Move Text Mod." ), g_Module_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST, msg,
KiBitmap( move_field_xpm ) );
}
msg = AddHotkeyName( _("Rotate Text Mod." ), g_Module_Editor_Hokeys_Descr,
HK_ROTATE_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_ROTATE_TEXTMODULE, msg, KiBitmap( rotate_field_xpm ) );
if( !flags )
{
msg = AddHotkeyName( _("Edit Text Mod." ), g_Module_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_EDIT_TEXTMODULE, msg, KiBitmap( edit_text_xpm ) );
if( ( static_cast<TEXTE_MODULE*>( item ) )->GetType() == TEXTE_MODULE::TEXT_is_DIVERS )
{
msg = AddHotkeyName( _("Delete Text Mod." ), g_Module_Editor_Hokeys_Descr,
HK_DELETE );
AddMenuItem( PopMenu, ID_POPUP_PCB_DELETE_TEXTMODULE, msg,
KiBitmap( delete_text_xpm ) );
}
}
break;
case PCB_MODULE_EDGE_T:
{
if( (flags & IS_NEW) )
AddMenuItem( PopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING, _( "End edge" ),
KiBitmap( checked_ok_xpm ) );
if( !flags )
{
msg = AddHotkeyName( _("Move Edge" ), g_Module_Editor_Hokeys_Descr, HK_MOVE_ITEM );
AddMenuItem( PopMenu, ID_POPUP_PCB_MOVE_EDGE, msg, KiBitmap( move_line_xpm ) );
}
if( ( flags & (IS_NEW | IS_MOVED) ) == IS_MOVED )
AddMenuItem( PopMenu, ID_POPUP_PCB_PLACE_EDGE, _( "Place edge" ),
KiBitmap( checked_ok_xpm ) );
msg = AddHotkeyName( _("Edit" ), g_Module_Editor_Hokeys_Descr, HK_EDIT_ITEM );
AddMenuItem( PopMenu, ID_POPUP_MODEDIT_EDIT_BODY_ITEM,
msg, KiBitmap( options_segment_xpm ) );
msg = AddHotkeyName( _("Delete Edge" ), g_Module_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( PopMenu, ID_POPUP_PCB_DELETE_EDGE, msg, KiBitmap( delete_xpm ) );
wxMenu* edit_global_mnu = new wxMenu;
AddMenuItem( PopMenu, edit_global_mnu, ID_POPUP_MODEDIT_GLOBAL_EDIT_EDGE,
_( "Global Changes" ), KiBitmap( edit_xpm ) );
AddMenuItem( edit_global_mnu, ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE,
_( "Change Body Items Width" ), KiBitmap( width_segment_xpm ) );
AddMenuItem( edit_global_mnu, ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE,
_( "Change Body Items Layer" ), KiBitmap( select_layer_pair_xpm ) );
}
break;
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_VIA_T:
case PCB_TRACE_T:
case PCB_ZONE_T:
case PCB_MARKER_T:
case PCB_DIMENSION_T:
case PCB_TARGET_T:
msg.Printf( wxT( "FOOTPRINT_EDIT_FRAME::OnRightClick Error: Unexpected DrawType %d" ),
item->Type() );
DisplayError( this, msg );
break;
case SCREEN_T:
case TYPE_NOT_INIT:
case PCB_T:
msg.Printf( wxT( "FOOTPRINT_EDIT_FRAME::OnRightClick Error: illegal DrawType %d" ),
item->Type() );
DisplayError( this, msg );
break;
default:
msg.Printf( wxT( "FOOTPRINT_EDIT_FRAME::OnRightClick Error: unknown DrawType %d" ),
item->Type() );
DisplayError( this, msg );
break;
}
PopMenu->AppendSeparator();
}
if( ( GetToolId() == ID_MODEDIT_LINE_TOOL ) ||
( GetToolId() == ID_MODEDIT_CIRCLE_TOOL ) ||
( GetToolId() == ID_MODEDIT_ARC_TOOL ) )
{
AddMenuItem( PopMenu, ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH, _("Set Line Width" ),
KiBitmap( width_segment_xpm ) );
PopMenu->AppendSeparator();
}
return true;
}
bool PCB_EDIT_FRAME::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu )
{
wxString msg;
int flags = 0;
bool locate_track = false;
bool blockActive = (GetScreen()->m_BlockLocate.m_Command != BLOCK_IDLE);
wxClientDC dc( m_canvas );
BOARD_ITEM* item = GetCurItem();
m_canvas->SetCanStartBlock( -1 ); // Avoid to start a block coomand when clicking on menu
// If a command or a block is in progress:
// Put the Cancel command (if needed) and the End command
if( blockActive )
{
createPopUpBlockMenu( aPopMenu );
aPopMenu->AppendSeparator();
return true;
}
m_canvas->CrossHairOff( &dc );
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
}
else
{
AddMenuItem( aPopMenu, ID_POPUP_CLOSE_CURRENT_TOOL,
_( "End Tool" ), KiBitmap( cursor_xpm ) );
}
aPopMenu->AppendSeparator();
}
else
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), KiBitmap( cancel_xpm ) );
aPopMenu->AppendSeparator();
}
}
/* Select a proper item */
wxPoint cursorPos = GetScreen()->GetCrossHairPosition();
wxPoint selectPos = m_Collector->GetRefPos();
selectPos = GetScreen()->GetNearestGridPosition( selectPos );
/* We can reselect another item only if there are no item being edited
* because ALL moving functions use GetCurItem(), therefore GetCurItem()
* must return the same item during moving. We know an item is moving
* if( item && (item->m_Flags != 0)) is true and after calling
* PcbGeneralLocateAndDisplay(), GetCurItem() is any arbitrary BOARD_ITEM,
* not the current item being edited. In such case we cannot call
* PcbGeneralLocateAndDisplay().
*/
if( !item || (item->GetFlags() == 0) )
{
// show "item selector" menu only if no item now or selected item was not
// previously picked at this position
if( !item || cursorPos != selectPos )
{
m_canvas->SetAbortRequest( false );
item = PcbGeneralLocateAndDisplay();
if( m_canvas->GetAbortRequest() )
{
m_canvas->CrossHairOn( &dc );
return false;
}
}
}
item = GetCurItem();
if( item )
flags = item->GetFlags();
else
flags = 0;
if( item )
{
switch( item->Type() )
{
case PCB_MODULE_T:
createPopUpMenuForFootprints( (MODULE*) item, aPopMenu );
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
aPopMenu->AppendSeparator();
if( !( (MODULE*) item )->IsLocked() )
{
msg = AddHotkeyName( _("Lock Module" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, msg,
KiBitmap( locked_xpm ) );
}
else
{
msg = AddHotkeyName( _( "Unlock Module" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, msg,
KiBitmap( unlocked_xpm ) );
}
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE,
_( "Auto Place Module" ) );
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE, _( "Autoroute Module" ) );
}
break;
case PCB_PAD_T:
createPopUpMenuForFpPads( (D_PAD*) item, aPopMenu );
break;
case PCB_MODULE_TEXT_T:
createPopUpMenuForFpTexts( (TEXTE_MODULE*) item, aPopMenu );
break;
case PCB_LINE_T: // Some graphic items on technical layers
if( (flags & IS_NEW) )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING,
_( "End Drawing" ), KiBitmap( apply_xpm ) );
}
if( !flags )
{
msg = AddHotkeyName( _( "Move Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST,
msg, KiBitmap( move_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DRAWING, _( "Edit Drawing" ),
KiBitmap( edit_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING,
_( "Delete Drawing" ), KiBitmap( delete_xpm ) );
if( item->GetLayer() > LAST_COPPER_LAYER )
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING_LAYER,
_( "Delete All Drawing on Layer" ), KiBitmap( delete_xpm ) );
}
break;
case PCB_ZONE_T: // Item used to fill a zone
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE,
_( "Delete Zone Filling" ), KiBitmap( delete_xpm ) );
break;
case PCB_ZONE_AREA_T: // Item used to handle a zone area (outlines, holes ...)
if( flags & IS_NEW )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_( "Close Zone Outline" ), KiBitmap( apply_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER,
_( "Delete Last Corner" ), KiBitmap( delete_xpm ) );
}
else
{
createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu );
}
break;
case PCB_TEXT_T:
createPopUpMenuForTexts( (TEXTE_PCB*) item, aPopMenu );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
locate_track = true;
createPopupMenuForTracks( (TRACK*) item, aPopMenu );
break;
case PCB_MARKER_T:
createPopUpMenuForMarkers( (MARKER_PCB*) item, aPopMenu );
break;
case PCB_DIMENSION_T:
if( !flags )
{
msg = AddHotkeyName( _( "Edit Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DIMENSION, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Move Dimension Text" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Delete Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DIMENSION,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_TARGET_T:
if( !flags )
{
msg = AddHotkeyName( _( "Move Target" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST, msg, KiBitmap( move_xpm ) );
msg = AddHotkeyName( _( "Edit Target" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_MIRE, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Delete Target" ), g_Board_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_MIRE,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_MODULE_EDGE_T:
case SCREEN_T:
case TYPE_NOT_INIT:
case PCB_T:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unexpected DrawType %d" ),
item->Type() );
wxMessageBox( msg );
SetCurItem( NULL );
break;
default:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unknown DrawType %d" ),
item->Type() );
wxMessageBox( msg );
// Attempt to clear error (but should no occurs )
if( item->Type() >= MAX_STRUCT_TYPE_ID )
SetCurItem( NULL );
break;
}
aPopMenu->AppendSeparator();
}
if( !flags )
{
msg = AddHotkeyName( _( "Get and Move Footprint" ),
g_Board_Editor_Hokeys_Descr, HK_GET_AND_MOVE_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST,
msg, KiBitmap( move_module_xpm ) );
}
/* Display context sensitive commands: */
switch( GetToolId() )
{
case ID_PCB_ZONES_BUTT:
if( GetBoard()->m_ZoneDescriptorList.size() > 0 )
{
aPopMenu->AppendSeparator();
AddMenuItem( aPopMenu, ID_POPUP_PCB_FILL_ALL_ZONES,
_( "Fill or Refill All Zones" ), KiBitmap( fill_zone_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES,
_( "Remove Filled Areas in All Zones" ), KiBitmap( zone_unfill_xpm ) );
aPopMenu->AppendSeparator();
}
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_TRACK_BUTT:
if ( ! locate_track ) // This menu is already added when a track is located
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair for Vias" ), KiBitmap( select_layer_pair_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_TEXT_BUTT:
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_DIMENSION_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_MODULE_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC,
_( "Footprint Documentation" ), KiBitmap( book_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_NO_TOOL_SELECTED:
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
wxMenu* commands = new wxMenu;
AddMenuItem( aPopMenu, commands, ID_POPUP_PCB_AUTOPLACE_COMMANDS,
_( "Glob Move and Place" ), KiBitmap( move_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES,
_( "Unlock All Modules" ), KiBitmap( unlocked_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES,
_( "Lock All Modules" ), KiBitmap( locked_xpm ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_AUTOMOVE_ALL_MODULES,
_( "Move All Modules" ), KiBitmap( move_xpm ) );
commands->Append( ID_POPUP_PCB_AUTOMOVE_NEW_MODULES, _( "Move New Modules" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES, _( "Autoplace All Modules" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES, _( "Autoplace New Modules" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE, _( "Autoplace Next Module" ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_REORIENT_ALL_MODULES,
_( "Orient All Modules" ), KiBitmap( rotate_module_pos_xpm ) );
aPopMenu->AppendSeparator();
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
wxMenu* commands = new wxMenu;
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_COMMANDS, _( "Autoroute" ), commands );
AddMenuItem( commands, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair" ), KiBitmap( select_layer_pair_xpm ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES, _( "Autoroute All Modules" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _( "Reset Unrouted" ) );
aPopMenu->AppendSeparator();
}
if( locate_track )
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
}
m_canvas->CrossHairOn( &dc );
return true;
}
int EDIT_TOOL::Properties( TOOL_EVENT& aEvent )
{
const SELECTION& selection = m_selectionTool->GetSelection();
PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>();
if( !makeSelection( selection ) )
{
setTransitions();
return 0;
}
// Properties are displayed when there is only one item selected
if( selection.Size() == 1 )
{
// Display properties dialog
BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 );
// Check if user wants to edit pad or module properties
if( item->Type() == PCB_MODULE_T )
{
VECTOR2D cursor = getViewControls()->GetCursorPosition();
for( D_PAD* pad = static_cast<MODULE*>( item )->Pads(); pad; pad = pad->Next() )
{
if( pad->ViewBBox().Contains( cursor ) )
{
// Turns out that user wants to edit a pad properties
item = pad;
break;
}
}
}
std::vector<PICKED_ITEMS_LIST*>& undoList = editFrame->GetScreen()->m_UndoList.m_CommandsList;
// Some of properties dialogs alter pointers, so we should deselect them
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
STATUS_FLAGS flags = item->GetFlags();
item->ClearFlags();
// It is necessary to determine if anything has changed
PICKED_ITEMS_LIST* lastChange = undoList.empty() ? NULL : undoList.back();
// Display properties dialog
editFrame->OnEditItemRequest( NULL, item );
PICKED_ITEMS_LIST* currentChange = undoList.empty() ? NULL : undoList.back();
if( lastChange != currentChange ) // Something has changed
{
processChanges( currentChange );
updateRatsnest( true );
getModel<BOARD>()->GetRatsnest()->Recalculate();
item->ViewUpdate();
m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true );
}
item->SetFlags( flags );
}
setTransitions();
return 0;
}
/* Handle the left button mouse click, when a tool is active
*/
void PCB_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
BOARD_ITEM* DrawStruct = GetCurItem();
bool exit = false;
bool no_tool = GetToolId() == ID_NO_TOOL_SELECTED;
if( no_tool || ( DrawStruct && DrawStruct->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
if( DrawStruct && DrawStruct->GetFlags() ) // Command in progress
{
m_canvas->SetIgnoreMouseEvents( true );
m_canvas->CrossHairOff( aDC );
switch( DrawStruct->Type() )
{
case PCB_ZONE_AREA_T:
if( DrawStruct->IsNew() )
{
m_canvas->SetAutoPanRequest( true );
Begin_Zone( aDC );
}
else
{
End_Move_Zone_Corner_Or_Outlines( aDC, (ZONE_CONTAINER*) DrawStruct );
}
exit = true;
break;
case PCB_TRACE_T:
case PCB_VIA_T:
if( DrawStruct->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) DrawStruct, aDC );
exit = true;
}
break;
case PCB_TEXT_T:
Place_Texte_Pcb( (TEXTE_PCB*) DrawStruct, aDC );
exit = true;
break;
case PCB_MODULE_TEXT_T:
PlaceTexteModule( (TEXTE_MODULE*) DrawStruct, aDC );
exit = true;
break;
case PCB_PAD_T:
PlacePad( (D_PAD*) DrawStruct, aDC );
exit = true;
break;
case PCB_MODULE_T:
PlaceModule( (MODULE*) DrawStruct, aDC );
exit = true;
break;
case PCB_TARGET_T:
PlaceTarget( (PCB_TARGET*) DrawStruct, aDC );
exit = true;
break;
case PCB_LINE_T:
if( no_tool ) // when no tools: existing item moving.
{
Place_DrawItem( (DRAWSEGMENT*) DrawStruct, aDC );
exit = true;
}
break;
case PCB_DIMENSION_T:
if( ! DrawStruct->IsNew() )
{ // We are moving the text of an existing dimension. Place it
PlaceDimensionText( (DIMENSION*) DrawStruct, aDC );
exit = true;
}
break;
default:
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnLeftClick() err: DrawType %d m_Flags != 0" ),
DrawStruct->Type() );
exit = true;
break;
}
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->CrossHairOn( aDC );
if( exit )
return;
}
else if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT )
&& !wxGetKeyState( WXK_CONTROL ) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if( DrawStruct )
SendMessageToEESCHEMA( DrawStruct );
}
}
if( DrawStruct ) // display netclass info for zones, tracks and pads
{
switch( DrawStruct->Type() )
{
case PCB_ZONE_AREA_T:
case PCB_TRACE_T:
case PCB_VIA_T:
case PCB_PAD_T:
GetDesignSettings().SetCurrentNetClass(
((BOARD_CONNECTED_ITEM*)DrawStruct)->GetNetClassName() );
updateTraceWidthSelectBox();
updateViaSizeSelectBox();
break;
default:
break;
}
}
switch( GetToolId() )
{
case ID_MAIN_MENUBAR:
case ID_NO_TOOL_SELECTED:
break;
case ID_PCB_MUWAVE_TOOL_SELF_CMD:
case ID_PCB_MUWAVE_TOOL_GAP_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_ARC_CMD:
case ID_PCB_MUWAVE_TOOL_FUNCTION_SHAPE_CMD:
MuWaveCommand( aDC, aPosition );
break;
case ID_PCB_HIGHLIGHT_BUTT:
{
int netcode = SelectHighLight( aDC );
if( netcode < 0 )
SetMsgPanel( GetBoard() );
else
{
NETINFO_ITEM* net = GetBoard()->FindNet( netcode );
if( net )
{
MSG_PANEL_ITEMS items;
net->GetMsgPanelInfo( items );
SetMsgPanel( items );
}
}
}
break;
case ID_PCB_SHOW_1_RATSNEST_BUTT:
DrawStruct = PcbGeneralLocateAndDisplay();
Show_1_Ratsnest( DrawStruct, aDC );
if( DrawStruct )
SendMessageToEESCHEMA( DrawStruct );
break;
case ID_PCB_MIRE_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
SetCurItem( (BOARD_ITEM*) CreateTarget( aDC ) );
m_canvas->MoveCursorToCrossHair();
}
else if( DrawStruct->Type() == PCB_TARGET_T )
{
PlaceTarget( (PCB_TARGET*) DrawStruct, aDC );
}
else
{
DisplayError( this, wxT( "OnLeftClick err: not a PCB_TARGET_T" ) );
}
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_LINE_BUTT:
{
STROKE_T shape = S_SEGMENT;
if( GetToolId() == ID_PCB_CIRCLE_BUTT )
shape = S_CIRCLE;
if( GetToolId() == ID_PCB_ARC_BUTT )
shape = S_ARC;
if( IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this, _( "Graphic not allowed on Copper layers" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) Begin_DrawSegment( NULL, shape, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct
&& (DrawStruct->Type() == PCB_LINE_T)
&& DrawStruct->IsNew() )
{
DrawStruct = (BOARD_ITEM*) Begin_DrawSegment( (DRAWSEGMENT*) DrawStruct, shape, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
}
break;
case ID_TRACK_BUTT:
if( !IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this, _( "Tracks on Copper layers only " ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) Begin_Route( NULL, aDC );
SetCurItem( DrawStruct );
if( DrawStruct )
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct && DrawStruct->IsNew() )
{
TRACK* track = Begin_Route( (TRACK*) DrawStruct, aDC );
// SetCurItem() must not write to the msg panel
// because a track info is displayed while moving the mouse cursor
if( track ) // A new segment was created
SetCurItem( DrawStruct = (BOARD_ITEM*) track, false );
m_canvas->SetAutoPanRequest( true );
}
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
/* ZONE or KEEPOUT Tool is selected. Determine action for a left click:
* this can be start a new zone or select and move an existing zone outline corner
* if found near the mouse cursor
*/
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
if( Begin_Zone( aDC ) )
{
m_canvas->SetAutoPanRequest( true );
DrawStruct = GetBoard()->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
}
else if( DrawStruct && (DrawStruct->Type() == PCB_ZONE_AREA_T) && DrawStruct->IsNew() )
{ // Add a new corner to the current outline being created:
m_canvas->SetAutoPanRequest( true );
Begin_Zone( aDC );
DrawStruct = GetBoard()->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
else
{
DisplayError( this, wxT( "PCB_EDIT_FRAME::OnLeftClick() zone internal error" ) );
}
break;
case ID_PCB_ADD_TEXT_BUTT:
if( IsLayerInList( EDGE_LAYER, GetActiveLayer() ) )
{
DisplayError( this,
_( "Texts not allowed on Edge Cut layer" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
SetCurItem( CreateTextePcb( aDC ) );
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct->Type() == PCB_TEXT_T )
{
Place_Texte_Pcb( (TEXTE_PCB*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
}
else
{
DisplayError( this, wxT( "OnLeftClick err: not a PCB_TEXT_T" ) );
}
break;
case ID_PCB_MODULE_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
m_canvas->MoveCursorToCrossHair();
DrawStruct = (BOARD_ITEM*) LoadModuleFromLibrary(
wxEmptyString, Prj().PcbFootprintLibs(), true, aDC );
SetCurItem( DrawStruct );
if( DrawStruct )
StartMoveModule( (MODULE*) DrawStruct, aDC, false );
}
else if( DrawStruct->Type() == PCB_MODULE_T )
{
PlaceModule( (MODULE*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
}
else
{
DisplayError( this, wxT( "Internal err: Struct not PCB_MODULE_T" ) );
}
break;
case ID_PCB_DIMENSION_BUTT:
if( IsLayerInList( EDGE_LAYER|ALL_CU_LAYERS, GetActiveLayer() ) )
{
DisplayError( this,
_( "Dimension not allowed on Copper or Edge Cut layers" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) EditDimension( NULL, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct && (DrawStruct->Type() == PCB_DIMENSION_T) && DrawStruct->IsNew() )
{
DrawStruct = (BOARD_ITEM*) EditDimension( (DIMENSION*) DrawStruct, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else
{
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnLeftClick() error item is not a DIMENSION" ) );
}
break;
case ID_PCB_DELETE_ITEM_BUTT:
if( !DrawStruct || !DrawStruct->GetFlags() )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if( DrawStruct && (DrawStruct->GetFlags() == 0) )
{
RemoveStruct( DrawStruct, aDC );
SetCurItem( DrawStruct = NULL );
}
}
break;
case ID_PCB_PLACE_OFFSET_COORD_BUTT:
m_canvas->DrawAuxiliaryAxis( aDC, GR_XOR );
SetAuxOrigin( GetCrossHairPosition() );
m_canvas->DrawAuxiliaryAxis( aDC, GR_COPY );
OnModify();
break;
case ID_PCB_PLACE_GRID_COORD_BUTT:
m_canvas->DrawGridAxis( aDC, GR_XOR, GetBoard()->GetGridOrigin() );
SetGridOrigin( GetCrossHairPosition() );
m_canvas->DrawGridAxis( aDC, GR_COPY, GetBoard()->GetGridOrigin() );
break;
default:
DisplayError( this, wxT( "PCB_EDIT_FRAME::OnLeftClick() id error" ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
}
