Esempio n. 1
0
void InspectorBarLine::setElement()
      {
      InspectorElementBase::setElement();
      BarLine* bl = toBarLine(inspector->element());

      // enable / disable individual type combo items according to score and selected bar line status
      bool bMultiStaff  = bl->score()->nstaves() > 1;
      BarLineType blt   = bl->barLineType();
      bool isRepeat     = blt & (BarLineType::START_REPEAT | BarLineType::END_REPEAT | BarLineType::END_START_REPEAT);

      const QStandardItemModel* model = qobject_cast<const QStandardItemModel*>(b.type->model());
      int i = 0;
      for (auto& k : BarLine::barLineTable) {
            QStandardItem* item = model->item(i);
            // if combo item is repeat type, should be disabled for multi-staff scores
            if (k.type & (BarLineType::START_REPEAT | BarLineType::END_REPEAT | BarLineType::END_START_REPEAT)) {
                  // disable / enable
                  item->setFlags(bMultiStaff ?
                        item->flags() & ~(Qt::ItemIsSelectable|Qt::ItemIsEnabled) :
                        item->flags() | (Qt::ItemFlags)(Qt::ItemIsSelectable|Qt::ItemIsEnabled) );
                  }
            // if combo item is NOT repeat type, should be disabled if selected bar line is a repeat
            else {
                  item->setFlags(isRepeat ?
                        item->flags() & ~(Qt::ItemIsSelectable|Qt::ItemIsEnabled) :
                        item->flags() | (Qt::ItemFlags)(Qt::ItemIsSelectable|Qt::ItemIsEnabled) );
                  }
            ++i;
            }
#if 0
      blockSpanDataSignals(true);
      manageSpanData();
      blockSpanDataSignals(false);
#endif
      }
Esempio n. 2
0
void TestBarline::barline06()
      {
      char  msg[256];
      Score* score = readScore(DIR + "barline06.mscx");
      QVERIFY(score);
      score->doLayout();

      // scan each measure
      Measure*    msr   = score->firstMeasure();
      int         msrNo = 1;
      for (int i=0; i < 3; i++) {
            // check measure endbarline type
            sprintf(msg, "EndBarLineType not NORMAL in measure %d.", msrNo);
//TODO            QVERIFY2(msr->endBarLineType() == BarLineType::NORMAL, msg);
            // locate end-measure bar line segment
            Segment* seg = msr->findSegment(SegmentType::EndBarLine, msr->tick()+msr->ticks());
            sprintf(msg, "No SegEndBarLine in measure %d.", msr->no());
            QVERIFY2(seg != nullptr, msg);

            // check only i-th staff has custom bar line type
            for (int j=0; j < 3; j++) {
                  BarLine* bar = static_cast<BarLine*>(seg->element(j*VOICES));
                  // if not the i-th staff, bar should be normal and not custom
                  if (j != i) {
                        sprintf(msg, "barline type NOT NORMAL or CUSTOM TYPE in staff %d of measure %d.", j+1, msrNo);
                        QVERIFY2(bar->barLineType() == BarLineType::NORMAL, msg);
//                        QVERIFY2(bar->customSubtype() == false, msg);
                        }
                  // in the i-th staff, the bar line should be of type DOUBLE and custom type should be true
                  else {
                        sprintf(msg, "No barline for staff %d in measure %d", j+1, msrNo);
                        QVERIFY2(bar != nullptr, msg);
                        sprintf(msg, "barline type NOT DOUBLE or NOT CUSTOM TYPE in staff %d of measure %d.", j+1, msrNo);
                        QVERIFY2(bar->barLineType() == BarLineType::DOUBLE, msg);
//                        QVERIFY2(bar->customSubtype() == true, msg);
                        }
                  }

            msr = msr->nextMeasure();
            msrNo++;
            }
//      QVERIFY(saveCompareScore(score, "barline06.mscx", DIR + "barline06-ref.mscx"));
      delete score;
      }
Esempio n. 3
0
bool BarLine::acceptDrop(MuseScoreView*, const QPointF&, Element* e) const
      {
      int type = e->type();
      if (type == BAR_LINE) {
            if (parent() && parent()->type() == SEGMENT)
                  return true;
            if (parent() && parent()->type() == SYSTEM) {
                  BarLine* b = static_cast<BarLine*>(e);
                  return (b->barLineType() == BROKEN_BAR || b->barLineType() == DOTTED_BAR
                     || b->barLineType() == NORMAL_BAR || b->barLineType() == DOUBLE_BAR
                     || b->spanFrom() != 0 || b->spanTo() != DEFAULT_BARLINE_TO);
                  }
            }
      else {
            return (type == ARTICULATION
               && parent()
               && parent()->type() == SEGMENT
               && static_cast<Segment*>(parent())->segmentType() == Segment::SegEndBarLine);
            }
      return false;
      }
Esempio n. 4
0
bool BarLine::acceptDrop(const DropData& data) const
      {
      Element::Type type = data.element->type();
      if (type == Element::Type::BAR_LINE) {
            if (parent() && parent()->type() == Element::Type::SEGMENT)
                  return true;
            if (parent() && parent()->type() == Element::Type::SYSTEM) {
                  BarLine* b = static_cast<BarLine*>(data.element);
                  return (b->barLineType() == BarLineType::BROKEN || b->barLineType() == BarLineType::DOTTED
                     || b->barLineType() == BarLineType::NORMAL || b->barLineType() == BarLineType::DOUBLE
                     || b->spanFrom() != 0 || b->spanTo() != DEFAULT_BARLINE_TO);
                  }
            }
      else {
            return (type == Element::Type::ARTICULATION
               && parent()
               && parent()->type() == Element::Type::SEGMENT
               && static_cast<Segment*>(parent())->segmentType() == Segment::Type::EndBarLine);
            }
      return false;
      }
Esempio n. 5
0
void InspectorBarLine::setAsStaffDefault()
      {
      BarLine* bl = toBarLine(inspector->element());
      Staff* staff = bl->staff();
      Score* score = bl->score();
      score->startCmd();
      staff->undoChangeProperty(Pid::STAFF_BARLINE_SPAN,      bl->getProperty(Pid::BARLINE_SPAN));
      staff->undoChangeProperty(Pid::STAFF_BARLINE_SPAN_FROM, bl->getProperty(Pid::BARLINE_SPAN_FROM));
      staff->undoChangeProperty(Pid::STAFF_BARLINE_SPAN_TO,   bl->getProperty(Pid::BARLINE_SPAN_TO));
      if (bl->barLineType() == BarLineType::NORMAL)
            bl->setGenerated(true);
      score->endCmd();
      }
Esempio n. 6
0
void TestBarline::barline05()
      {
      Score* score = readScore(DIR + "barline05.mscx");
      QVERIFY(score);
      score->doLayout();

      // 'go' to 4th measure
      Measure* msr = score->firstMeasure();
      for (int i=0; i < 3; i++)
            msr = msr->nextMeasure();
      // create and add a LineBreak element
      LayoutBreak* lb = new LayoutBreak(score);
      lb->setLayoutBreakType(LayoutBreak::Type::LINE);
      lb->setTrack(-1);             // system-level element
      lb->setParent(msr);
      score->undoAddElement(lb);
      score->doLayout();

      // check an end-repeat bar line has been created at the end of this measure and it is generated
      Segment* seg = msr->findSegment(SegmentType::EndBarLine, msr->tick()+msr->ticks());
      QVERIFY2(seg != nullptr, "No SegEndBarLine segment in measure 4.");
      BarLine* bar = static_cast<BarLine*>(seg->element(0));
      QVERIFY2(bar != nullptr, "No end-repeat barline in measure 4.");
      QVERIFY2(bar->barLineType() == BarLineType::END_REPEAT, "Barline at measure 4 is not END-REPEAT");
      QVERIFY2(bar->generated(), "End-repeat barline in measure 4 is non-generated.");

      // // check an end-repeat bar line has been created at the beginning of the next measure and it is not generated
      // check an end-repeat bar line has been created at the beginning of the next measure and it is generated
      msr = msr->nextMeasure();
      seg = msr->findSegment(SegmentType::StartRepeatBarLine, msr->tick());
      QVERIFY2(seg != nullptr, "No SegStartRepeatBarLine segment in measure 5.");
      bar = static_cast<BarLine*>(seg->element(0));
      QVERIFY2(bar != nullptr, "No start-repeat barline in measure 5.");
      QVERIFY2(bar->generated(), "Start-reapeat barline in measure 5 is not generated.");

//      QVERIFY(saveCompareScore(score, "barline05.mscx", DIR + "barline05-ref.mscx"));
      delete score;
      }
Esempio n. 7
0
Element* BarLine::drop(const DropData& data)
      {
      Element* e = data.element;
      int type = e->type();
      if (type == BAR_LINE) {
            BarLine* bl = static_cast<BarLine*>(e);
            BarLineType st = bl->barLineType();
            // if no change in subtype or no change in span, do nothing
            if (st == barLineType() && bl->spanFrom() == 0 && bl->spanTo() == DEFAULT_BARLINE_TO) {
                  delete e;
                  return 0;
                  }
            // system left-side bar line
            if (parent()->type() == SYSTEM) {
                  BarLine* b = static_cast<System*>(parent())->barLine();
                  score()->undoChangeProperty(b, P_SUBTYPE, int(bl->barLineType()));
                  delete e;
                  return 0;
                  }

            // check if the new property can apply to this single bar line
            bool oldRepeat = (barLineType() == START_REPEAT || barLineType() == END_REPEAT
                        || barLineType() == END_START_REPEAT);
            bool newRepeat = (bl->barLineType() == START_REPEAT || bl->barLineType() == END_REPEAT
                        || bl->barLineType() == END_START_REPEAT);
            // if repeats are not involved or drop refers to span rather than subtype =>
            // single bar line drop
            if( (!oldRepeat && !newRepeat) || (bl->spanFrom() != 0 || bl->spanTo() != DEFAULT_BARLINE_TO) ) {
                  // if drop refers to span, update this bar line span
                  if(bl->spanFrom() != 0 || bl->spanTo() != DEFAULT_BARLINE_TO) {
                        // if dropped spanFrom or spanTo are below the middle of standard staff (5 lines)
                        // adjust to the number of syaff lines
                        int bottomSpan = (staff()->lines()-1) * 2;
                        int spanFrom   = bl->spanFrom() > 4 ? bottomSpan - (8 - bl->spanFrom()) : bl->spanFrom();
                        int spanTo     = bl->spanTo() > 4 ? bottomSpan - (8 - bl->spanTo()) : bl->spanTo();
                        score()->undoChangeSingleBarLineSpan(this, 1, spanFrom, spanTo);
                        }
                  // if drop refer to subtype, update this bar line subtype
                  else {
                        score()->undoChangeProperty(this, P_SUBTYPE, int(bl->barLineType()));
//                        setCustomSubtype(true);
                        }
                  delete e;
                  return 0;
                  }

            // drop applies to all bar lines of the measure
            Measure* m = static_cast<Segment*>(parent())->measure();
            if (st == START_REPEAT) {
                  m = m->nextMeasure();
                  if (m == 0) {
                        delete e;
                        return 0;
                        }
                  }
            m->drop(data);
            }
      else if (type == ARTICULATION) {
            Articulation* atr = static_cast<Articulation*>(e);
            atr->setParent(this);
            atr->setTrack(track());
            score()->undoAddElement(atr);
            return atr;
            }
      return 0;
      }