void AutogenStep::run(QFutureInterface<bool> &interface)
{
BuildConfiguration *bc = buildConfiguration();
// Check whether we need to run autogen.sh
const QFileInfo configureInfo(bc->buildDirectory() + QLatin1String("/configure"));
const QFileInfo configureAcInfo(bc->buildDirectory() + QLatin1String("/configure.ac"));
const QFileInfo makefileAmInfo(bc->buildDirectory() + QLatin1String("/Makefile.am"));
if (!configureInfo.exists()
|| configureInfo.lastModified() < configureAcInfo.lastModified()
|| configureInfo.lastModified() < makefileAmInfo.lastModified()) {
m_runAutogen = true;
}
if (!m_runAutogen) {
emit addOutput(tr("Configuration unchanged, skipping autogen step."), BuildStep::MessageOutput);
interface.reportResult(true);
emit finished();
return;
}
m_runAutogen = false;
AbstractProcessStep::run(interface);
}
bool DMakeStep::init(QList<const BuildStep *> &earlierSteps)
{
BuildConfiguration *bc = buildConfiguration();
if (!bc)
bc = target()->activeBuildConfiguration();
m_tasks.clear();
ToolChain *tc = ToolChainKitInformation::toolChain(target()->kit(), ToolChain::Language::Cxx);
if (!tc) {
m_tasks.append(Task(Task::Error, tr("Qt Creator needs a compiler set up to build. Configure a compiler in the kit options."),
Utils::FileName(), -1,
Core::Id(ProjectExplorer::Constants::TASK_CATEGORY_BUILDSYSTEM)));
return true; // otherwise the tasks will not get reported
}
ProcessParameters *pp = processParameters();
pp->setMacroExpander(bc->macroExpander());
pp->setWorkingDirectory(bc->buildDirectory().toString());
Utils::Environment env = bc->environment();
// Force output to english for the parsers. Do this here and not in the toolchain's
// addToEnvironment() to not screw up the users run environment.
env.set(QLatin1String("LC_ALL"), QLatin1String("C"));
pp->setEnvironment(env);
pp->setCommand(makeCommand(bc->environment()));
pp->setArguments(allArguments());
pp->resolveAll();
setOutputParser(new GnuMakeParser());
IOutputParser *parser = target()->kit()->createOutputParser();
if (parser)
appendOutputParser(parser);
outputParser()->setWorkingDirectory(pp->effectiveWorkingDirectory());
return AbstractProcessStep::init(earlierSteps);
}
bool IosPresetBuildStep::init(QList<const BuildStep *> &earlierSteps)
{
BuildConfiguration *bc = buildConfiguration();
if (!bc)
bc = target()->activeBuildConfiguration();
ProcessParameters *pp = processParameters();
pp->setMacroExpander(bc->macroExpander());
pp->setWorkingDirectory(bc->buildDirectory().toString());
Utils::Environment env = bc->environment();
Utils::Environment::setupEnglishOutput(&env);
pp->setEnvironment(env);
pp->setCommand(command());
pp->setArguments(Utils::QtcProcess::joinArgs(arguments()));
pp->resolveAll();
// If we are cleaning, then build can fail with an error code, but that doesn't mean
// we should stop the clean queue
// That is mostly so that rebuild works on an already clean project
setIgnoreReturnValue(m_clean);
setOutputParser(target()->kit()->createOutputParser());
if (outputParser())
outputParser()->setWorkingDirectory(pp->effectiveWorkingDirectory());
return AbstractProcessStep::init(earlierSteps);
}
void ConfigureStepConfigWidget::updateDetails()
{
BuildConfiguration *bc = m_configureStep->buildConfiguration();
ProcessParameters param;
param.setMacroExpander(bc->macroExpander());
param.setEnvironment(bc->environment());
param.setWorkingDirectory(bc->buildDirectory().toString());
param.setCommand(projectDirRelativeToBuildDir(bc) + QLatin1String("configure"));
param.setArguments(m_configureStep->additionalArguments());
m_summaryText = param.summaryInWorkdir(displayName());
emit updateSummary();
}
void AutogenStepConfigWidget::updateDetails()
{
BuildConfiguration *bc = m_autogenStep->buildConfiguration();
ProcessParameters param;
param.setMacroExpander(bc->macroExpander());
param.setEnvironment(bc->environment());
param.setWorkingDirectory(bc->buildDirectory());
param.setCommand(QLatin1String("autogen.sh"));
param.setArguments(m_autogenStep->additionalArguments());
m_summaryText = param.summary(displayName());
emit updateSummary();
}
bool AutogenStep::init()
{
BuildConfiguration *bc = buildConfiguration();
ProcessParameters *pp = processParameters();
pp->setMacroExpander(bc->macroExpander());
pp->setEnvironment(bc->environment());
pp->setWorkingDirectory(bc->buildDirectory());
pp->setCommand(QLatin1String("autogen.sh"));
pp->setArguments(additionalArguments());
return AbstractProcessStep::init();
}
bool ConfigureStep::init(QList<const BuildStep *> &earlierSteps)
{
BuildConfiguration *bc = buildConfiguration();
ProcessParameters *pp = processParameters();
pp->setMacroExpander(bc->macroExpander());
pp->setEnvironment(bc->environment());
pp->setWorkingDirectory(bc->buildDirectory().toString());
pp->setCommand(projectDirRelativeToBuildDir(bc) + QLatin1String("configure"));
pp->setArguments(additionalArguments());
pp->resolveAll();
return AbstractProcessStep::init(earlierSteps);
}
void GenericMakeStepConfigWidget::updateDetails()
{
BuildConfiguration *bc = m_makeStep->buildConfiguration();
if (!bc)
bc = m_makeStep->target()->activeBuildConfiguration();
ProcessParameters param;
param.setMacroExpander(bc->macroExpander());
param.setWorkingDirectory(bc->buildDirectory().toString());
param.setEnvironment(bc->environment());
param.setCommand(m_makeStep->makeCommand(bc->environment()));
param.setArguments(m_makeStep->allArguments());
m_summaryText = param.summary(displayName());
emit updateSummary();
}
void IosPresetBuildStepConfigWidget::updateDetails()
{
BuildConfiguration *bc = m_buildStep->buildConfiguration();
if (!bc)
bc = m_buildStep->target()->activeBuildConfiguration();
ProcessParameters param;
param.setMacroExpander(bc->macroExpander());
param.setWorkingDirectory(bc->buildDirectory().toString());
param.setEnvironment(bc->environment());
param.setCommand(m_buildStep->command());
param.setArguments(Utils::QtcProcess::joinArgs(m_buildStep->arguments()));
m_summaryText = param.summary(displayName());
emit updateSummary();
}
bool IosBuildStep::init()
{
BuildConfiguration *bc = buildConfiguration();
if (!bc)
bc = target()->activeBuildConfiguration();
if (!bc)
emit addTask(Task::buildConfigurationMissingTask());
ToolChain *tc = ToolChainKitInformation::toolChain(target()->kit());
if (!tc)
emit addTask(Task::compilerMissingTask());
if (!bc || !tc) {
emitFaultyConfigurationMessage();
return false;
}
ProcessParameters *pp = processParameters();
pp->setMacroExpander(bc->macroExpander());
pp->setWorkingDirectory(bc->buildDirectory().toString());
Utils::Environment env = bc->environment();
// Force output to english for the parsers. Do this here and not in the toolchain's
// addToEnvironment() to not screw up the users run environment.
env.set(QLatin1String("LC_ALL"), QLatin1String("C"));
pp->setEnvironment(env);
pp->setCommand(buildCommand());
pp->setArguments(Utils::QtcProcess::joinArgs(allArguments()));
pp->resolveAll();
// If we are cleaning, then build can fail with an error code, but that doesn't mean
// we should stop the clean queue
// That is mostly so that rebuild works on an already clean project
setIgnoreReturnValue(m_clean);
setOutputParser(new GnuMakeParser());
IOutputParser *parser = target()->kit()->createOutputParser();
if (parser)
appendOutputParser(parser);
outputParser()->setWorkingDirectory(pp->effectiveWorkingDirectory());
return AbstractProcessStep::init();
}
bool MakeStep::init(QList<const BuildStep *> &earlierSteps)
{
BuildConfiguration *bc = buildConfiguration();
if (!bc)
bc = target()->activeBuildConfiguration();
if (!bc)
emit addTask(Task::buildConfigurationMissingTask());
ToolChain *tc = ToolChainKitInformation::toolChain(target()->kit());
if (!tc)
emit addTask(Task::compilerMissingTask());
if (!tc || !bc) {
emitFaultyConfigurationMessage();
return false;
}
QString arguments = Utils::QtcProcess::joinArgs(m_buildTargets);
Utils::QtcProcess::addArgs(&arguments, additionalArguments());
setIgnoreReturnValue(m_clean);
ProcessParameters *pp = processParameters();
pp->setMacroExpander(bc->macroExpander());
Utils::Environment env = bc->environment();
// Force output to english for the parsers. Do this here and not in the toolchain's
// addToEnvironment() to not screw up the users run environment.
env.set(QLatin1String("LC_ALL"), QLatin1String("C"));
pp->setEnvironment(env);
pp->setWorkingDirectory(bc->buildDirectory().toString());
pp->setCommand(tc ? tc->makeCommand(bc->environment()) : QLatin1String("make"));
pp->setArguments(arguments);
pp->resolveAll();
setOutputParser(new GnuMakeParser());
IOutputParser *parser = target()->kit()->createOutputParser();
if (parser)
appendOutputParser(parser);
outputParser()->setWorkingDirectory(pp->effectiveWorkingDirectory());
return AbstractProcessStep::init(earlierSteps);
}
bool IosBuildStep::init()
{
BuildConfiguration *bc = buildConfiguration();
if (!bc)
bc = target()->activeBuildConfiguration();
ToolChain *tc = ToolChainKitInformation::toolChain(target()->kit());
if (!tc) {
Task t = Task(Task::Error, tr("Qt Creator needs a compiler set up to build. Configure a compiler in the kit preferences."),
Utils::FileName(), -1,
Core::Id(ProjectExplorer::Constants::TASK_CATEGORY_BUILDSYSTEM));
emit addTask(t);
emit addOutput(tr("Configuration is faulty. Check the Issues output pane for details."),
BuildStep::MessageOutput);
return false;
}
ProcessParameters *pp = processParameters();
pp->setMacroExpander(bc->macroExpander());
pp->setWorkingDirectory(bc->buildDirectory().toString());
Utils::Environment env = bc->environment();
// Force output to english for the parsers. Do this here and not in the toolchain's
// addToEnvironment() to not screw up the users run environment.
env.set(QLatin1String("LC_ALL"), QLatin1String("C"));
pp->setEnvironment(env);
pp->setCommand(buildCommand());
pp->setArguments(Utils::QtcProcess::joinArgs(allArguments()));
pp->resolveAll();
// If we are cleaning, then build can fail with an error code, but that doesn't mean
// we should stop the clean queue
// That is mostly so that rebuild works on an already clean project
setIgnoreReturnValue(m_clean);
setOutputParser(new GnuMakeParser());
IOutputParser *parser = target()->kit()->createOutputParser();
if (parser)
appendOutputParser(parser);
outputParser()->setWorkingDirectory(pp->effectiveWorkingDirectory());
return AbstractProcessStep::init();
}
void ConfigureStep::run(QFutureInterface<bool>& fi)
{
BuildConfiguration *bc = buildConfiguration();
//Check whether we need to run configure
const QString projectDir(bc->target()->project()->projectDirectory().toString());
const QFileInfo configureInfo(projectDir + QLatin1String("/configure"));
const QFileInfo configStatusInfo(bc->buildDirectory().toString() + QLatin1String("/config.status"));
if (!configStatusInfo.exists()
|| configStatusInfo.lastModified() < configureInfo.lastModified()) {
m_runConfigure = true;
}
if (!m_runConfigure) {
emit addOutput(tr("Configuration unchanged, skipping configure step."), BuildStep::MessageOutput);
reportRunResult(fi, true);
return;
}
m_runConfigure = false;
AbstractProcessStep::run(fi);
}
void MakeStepConfigWidget::updateDetails()
{
BuildConfiguration *bc = m_makeStep->buildConfiguration();
if (!bc)
bc = m_makeStep->target()->activeBuildConfiguration();
ToolChain *tc = ToolChainKitInformation::toolChain(m_makeStep->target()->kit());
if (tc) {
QString arguments = Utils::QtcProcess::joinArgs(m_makeStep->m_buildTargets);
Utils::QtcProcess::addArgs(&arguments, m_makeStep->additionalArguments());
ProcessParameters param;
param.setMacroExpander(bc->macroExpander());
param.setEnvironment(bc->environment());
param.setWorkingDirectory(bc->buildDirectory().toString());
param.setCommand(tc->makeCommand(bc->environment()));
param.setArguments(arguments);
m_summaryText = param.summary(displayName());
} else {
m_summaryText = QLatin1String("<b>") + ProjectExplorer::ToolChainKitInformation::msgNoToolChainInTarget() + QLatin1String("</b>");
}
emit updateSummary();
}
