int main(int argc, char *argv[]) {
/*--- Variable definitions ---*/
char file_name[200];
unsigned short nZone = 1;
#ifndef NO_MPI
#ifdef WINDOWS
MPI_Init(&argc,&argv);
#else
MPI::Init(argc, argv);
#endif
#endif
/*--- Definition of the config problem ---*/
CConfig *config;
if (argc == 2) config = new CConfig(argv[1], SU2_MAC, ZONE_0, nZone, VERB_HIGH);
else { strcpy (file_name, "default.cfg"); config = new CConfig(file_name, SU2_MAC, ZONE_0, nZone, VERB_HIGH); }
/*--- Definition of the Class for the geometry ---*/
CGeometry *geometry; geometry = new CGeometry;
geometry = new CPhysicalGeometry(config, ZONE_0, nZone);
/*--- Perform the non-dimensionalization, in case any values are needed ---*/
config->SetNondimensionalization(geometry->GetnDim(), ZONE_0);
cout << endl <<"----------------------- Preprocessing computations ----------------------" << endl;
/*--- Compute elements surrounding points, points surrounding points, and elements surronding elements ---*/
cout << "Setting local point and element connectivity." <<endl;
geometry->SetEsuP(); geometry->SetPsuP(); geometry->SetEsuE();
/*--- Check the orientation before computing geometrical quantities ---*/
cout << "Check numerical grid orientation." <<endl;
geometry->SetBoundVolume(); geometry->Check_Orientation(config);
/*--- Create the edge structure ---*/
cout << "Identify faces, edges and vertices." <<endl;
geometry->SetFaces(); geometry->SetEdges(); geometry->SetVertex(config); geometry->SetCG();
/*--- Create the control volume structures ---*/
cout << "Set control volume structure." << endl;
geometry->SetControlVolume(config, ALLOCATE); geometry->SetBoundControlVolume(config, ALLOCATE);
/*--- Set the near-field and interface boundary conditions ---*/
geometry->MatchNearField(config);
if (config->GetKind_Adaptation() != NONE) {
cout << endl <<"--------------------- Start numerical grid adaptation -------------------" << endl;
/*-- Definition of the Class for grid adaptation ---*/
CGridAdaptation *grid_adaptation;
grid_adaptation = new CGridAdaptation(geometry, config);
/*--- Read the flow solution and/or the adjoint solution
and choose the elements to adapt ---*/
if ((config->GetKind_Adaptation() != NONE) && (config->GetKind_Adaptation() != FULL)
&& (config->GetKind_Adaptation() != WAKE) && (config->GetKind_Adaptation() != TWOPHASE)
&& (config->GetKind_Adaptation() != SMOOTHING) && (config->GetKind_Adaptation() != SUPERSONIC_SHOCK))
grid_adaptation->GetFlowSolution(geometry, config);
switch (config->GetKind_Adaptation()) {
case NONE:
break;
case SMOOTHING:
config->SetSmoothNumGrid(true);
grid_adaptation->SetNo_Refinement(geometry, 1);
break;
case FULL:
grid_adaptation->SetComplete_Refinement(geometry, 1);
break;
case WAKE:
grid_adaptation->SetWake_Refinement(geometry, 1);
break;
case TWOPHASE:
grid_adaptation->SetTwoPhase_Refinement(geometry, 1);
break;
case SUPERSONIC_SHOCK:
grid_adaptation->SetSupShock_Refinement(geometry, config);
break;
case FULL_FLOW:
grid_adaptation->SetComplete_Refinement(geometry, 1);
break;
case FULL_ADJOINT:
grid_adaptation->GetAdjSolution(geometry, config);
grid_adaptation->SetComplete_Refinement(geometry, 1);
break;
case FULL_LINEAR:
grid_adaptation->GetLinSolution(geometry, config);
grid_adaptation->SetComplete_Refinement(geometry, 1);
break;
case GRAD_FLOW:
grid_adaptation->SetIndicator_Flow(geometry, config, 1);
break;
case GRAD_ADJOINT:
grid_adaptation->GetAdjSolution(geometry, config);
grid_adaptation->SetIndicator_Adj(geometry, config, 1);
break;
case GRAD_FLOW_ADJ:
grid_adaptation->GetAdjSolution(geometry, config);
grid_adaptation->SetIndicator_FlowAdj(geometry, config);
break;
case COMPUTABLE:
grid_adaptation->GetAdjSolution(geometry, config);
grid_adaptation->GetFlowResidual(geometry, config);
grid_adaptation->SetIndicator_Computable(geometry, config);
break;
case REMAINING:
cout << "Adaptation method not implemented."<< endl;
cout << "Press any key to exit..." << endl;
cin.get();
exit(1);
break;
case ROBUST:
grid_adaptation->GetFlowResidual(geometry, config);
grid_adaptation->GetAdjResidual(geometry, config);
grid_adaptation->SetIndicator_Robust(geometry, config);
break;
case COMPUTABLE_ROBUST:
grid_adaptation->GetAdjSolution(geometry, config);
grid_adaptation->GetLinResidual(geometry, config);
grid_adaptation->SetIndicator_Computable_Robust(geometry, config);
break;
default :
cout << "The adaptation is not defined" << endl;
}
/*--- Perform an homothetic adaptation of the grid ---*/
CPhysicalGeometry *geo_adapt; geo_adapt = new CPhysicalGeometry;
cout << "Homothetic grid adaptation" << endl;
if (geometry->GetnDim() == 2) grid_adaptation->SetHomothetic_Adaptation2D(geometry, geo_adapt, config);
if (geometry->GetnDim() == 3) grid_adaptation->SetHomothetic_Adaptation3D(geometry, geo_adapt, config);
/*--- Smooth the numerical grid coordinates ---*/
if (config->GetSmoothNumGrid()) {
cout << "Preprocessing for doing the implicit smoothing." << endl;
geo_adapt->SetEsuP(); geo_adapt->SetPsuP(); geo_adapt->SetEsuE();
geo_adapt->SetBoundVolume(); geo_adapt->Check_Orientation(config);
geo_adapt->SetEdges(); geo_adapt->SetVertex(config);
cout << "Implicit smoothing of the numerical grid coordinates." << endl;
geo_adapt->SetCoord_Smoothing(5, 1.5, config);
}
/*--- Original and adapted grid ---*/
strcpy (file_name, "original_grid.plt");
geometry->SetTecPlot(file_name);
/*--- Write the adaptation sensor ---*/
grid_adaptation->WriteAdaptSensor(geometry, file_name);
strcpy (file_name, "adapted_grid.plt");
geo_adapt->SetTecPlot(file_name);
strcpy (file_name, "adapted_surface.plt");
geo_adapt->SetBoundTecPlot(config,file_name);
/*--- Write the new adapted grid, including the modified boundaries surfaces ---*/
geo_adapt->SetMeshFile(config, config->GetMesh_Out_FileName());
/*--- Write the restart file ---*/
if ((config->GetKind_Adaptation() != SMOOTHING) && (config->GetKind_Adaptation() != FULL) &&
(config->GetKind_Adaptation() != WAKE) && (config->GetKind_Adaptation() != TWOPHASE) &&
(config->GetKind_Adaptation() != SUPERSONIC_SHOCK))
grid_adaptation->SetRestart_FlowSolution(config, geo_adapt, config->GetRestart_FlowFileName());
if ((config->GetKind_Adaptation() == GRAD_FLOW_ADJ) || (config->GetKind_Adaptation() == GRAD_ADJOINT)
|| (config->GetKind_Adaptation() == FULL_ADJOINT) || (config->GetKind_Adaptation() == ROBUST)
|| (config->GetKind_Adaptation() == COMPUTABLE) || (config->GetKind_Adaptation() == COMPUTABLE_ROBUST) ||
(config->GetKind_Adaptation() == REMAINING))
grid_adaptation->SetRestart_AdjSolution(config, geo_adapt, config->GetRestart_AdjFileName());
if ((config->GetKind_Adaptation() == FULL_LINEAR) || (config->GetKind_Adaptation() == COMPUTABLE_ROBUST)) {
grid_adaptation->SetRestart_LinSolution(config, geo_adapt, config->GetRestart_LinFileName());
}
}
else {
strcpy (file_name, "original_grid.plt");
geometry->SetTecPlot(file_name);
geometry->SetMeshFile (config, config->GetMesh_Out_FileName());
}
#ifndef NO_MPI
#ifdef WINDOWS
MPI_Finalize();
#else
MPI::Finalize();
#endif
#endif
/*--- End solver ---*/
cout << endl <<"------------------------- Exit Success (SU2_MAC) ------------------------" << endl << endl;
return EXIT_SUCCESS;
}
