Esempio n. 1
0
int main(int argc, char *argv[])
{
	QApplication app(argc, argv);

	BoostLogInit();

	CMyRect w;
	w.show();

	app.exec();

	BoostLogUnInit();
	return 0;
}
Esempio n. 2
0
void Draw_ZenSpace( CGraphics& gr, const CMyRect& rc )
{
	TEXTMETRIC tm;
	tm.tmAscent = 0;
	::GetTextMetrics(gr, &tm);
	// 正方形にする
	CMyRect rc2;
	int minWidth = std::max<int>(1, std::min<int>(tm.tmAscent, std::min<int>(rc.Height(), rc.Width())) - 2);
	minWidth -= (minWidth + 5) / 10;
	rc2.SetPos(
		rc.left + (rc.Width() - minWidth) / 2,
		rc.top  + tm.tmAscent - minWidth
	);
	rc2.SetSize(minWidth, minWidth);
	gr.PushPen(::GetTextColor(gr), 1);
	gr.DrawRect(rc2);
	gr.PopPen();
}
Esempio n. 3
0
//! 全角スペース描画
void CFigure_ZenSpace::DispSpace(CGraphics& gr, DispPos* pDispPos, CEditView* pcView, bool bTrans) const
{
	// 2010.09.21 PP用実装追加
	// プロポーショナルでは、全角SPと□の幅が違うことがある。違う場合は独自に描画
	CTypeSupport cZenSpace(pcView, COLORIDX_ZENSPACE);

	int dx[1];
	dx[0] = pcView->GetTextMetrics().CalcTextWidth3(L" ", 1);

	RECT rc;
	//クリッピング矩形を計算。画面外なら描画しない
	if(pcView->GetTextArea().GenerateClipRect(&rc, *pDispPos, CHabaXInt(dx[0])))
	{
		int u25a1Dx = pcView->GetTextMetrics().CalcTextWidth3(L"□", 1);
		bool bDrawMySelf = dx[0] != u25a1Dx;
		const wchar_t* pZenSp = (bDrawMySelf ? L" " : L"□");
		int fontNo = WCODE::GetFontNo(*pZenSp);
		if( fontNo ){
			SFONT sFont;
			sFont.m_sFontAttr = gr.GetCurrentMyFontAttr();
			sFont.m_hFont = pcView->GetFontset().ChooseFontHandle(fontNo, sFont.m_sFontAttr);
			gr.PushMyFont(sFont);
		}
		int nHeightMargin = pcView->GetTextMetrics().GetCharHeightMarginByFontNo(fontNo);
		//描画
		ExtTextOutW_AnyBuild(
			gr,
			pDispPos->GetDrawPos().x,
			pDispPos->GetDrawPos().y + nHeightMargin,
			ExtTextOutOption() & ~(bTrans? ETO_OPAQUE: 0),
			&rc,
			pZenSp,
			1,
			dx
		);
		if( fontNo ){
			gr.PopMyFont();
		}
		if( bDrawMySelf ){
			gr.PushClipping(rc); // FIXME: 正確にはCombineRgn RGN_AND が必要
			
			// 全角SPの大きさ指定
			CMyRect rcZenSp;
			// 注:ベースライン無視
			rcZenSp.SetPos(pDispPos->GetDrawPos().x, pDispPos->GetDrawPos().y);
			rcZenSp.SetSize(dx[0]- pcView->m_pcEditDoc->m_cDocType.GetDocumentAttribute().m_nColumnSpace,
				pcView->GetTextMetrics().GetHankakuHeight());

			// 描画
			// 文字色や太字かどうかを現在の DC から調べる	// 2009.05.29 ryoji 
			// (検索マッチ等の状況に柔軟に対応するため、ここは記号の色指定には決め打ちしない)
			Draw_ZenSpace(gr, rcZenSp);

			// リージョン破棄
			gr.PopClipping();
			
			// To Here 2003.08.17 ryoji 改行文字が欠けないように
		}
		
	}

	//位置進める
	pDispPos->ForwardDrawCol(CLayoutXInt(dx[0]));
}
void CEditView::DrawBackImage(HDC hdc, RECT& rcPaint, HDC hdcBgImg)
{
#if 0
//	テスト背景パターン
	static int testColorIndex = 0;
	testColorIndex = testColorIndex % 7;
	COLORREF cols[7] = {RGB(255,255,255),
		RGB(200,255,255),RGB(255,200,255),RGB(255,255,200),
		RGB(200,200,255),RGB(255,200,200),RGB(200,255,200),
	};
	COLORREF colorOld = ::SetBkColor(hdc, cols[testColorIndex]);
	MyFillRect(hdc, rcPaint);
	::SetBkColor(hdc, colorOld);
	testColorIndex++;
#else
	CTypeSupport cTextType(this,COLORIDX_TEXT);
	COLORREF colorOld = ::SetBkColor(hdc, cTextType.GetBackColor());
	const CTextArea& area = GetTextArea();
	const CEditDoc& doc  = *m_pcEditDoc;
	const STypeConfig& typeConfig = doc.m_cDocType.GetDocumentAttribute();

	CMyRect rcImagePos;
	switch( typeConfig.m_backImgPos ){
	case BGIMAGE_TOP_LEFT:
	case BGIMAGE_BOTTOM_LEFT:
	case BGIMAGE_CENTER_LEFT:
		rcImagePos.left = area.GetAreaLeft();
		break;
	case BGIMAGE_TOP_RIGHT:
	case BGIMAGE_BOTTOM_RIGHT:
	case BGIMAGE_CENTER_RIGHT:
		rcImagePos.left = area.GetAreaRight() - doc.m_nBackImgWidth;
		break;
	case BGIMAGE_TOP_CENTER:
	case BGIMAGE_BOTTOM_CENTER:
	case BGIMAGE_CENTER:
		rcImagePos.left = area.GetAreaLeft() + area.GetAreaWidth()/2 - doc.m_nBackImgWidth/2;
		break;
	default:
		assert_warning(0 != typeConfig.m_backImgPos);
		break;
	}
	switch( typeConfig.m_backImgPos ){
	case BGIMAGE_TOP_LEFT:
	case BGIMAGE_TOP_RIGHT:
	case BGIMAGE_TOP_CENTER:
		rcImagePos.top  = area.GetAreaTop();
		break;
	case BGIMAGE_BOTTOM_LEFT:
	case BGIMAGE_BOTTOM_RIGHT:
	case BGIMAGE_BOTTOM_CENTER:
		rcImagePos.top  = area.GetAreaBottom() - doc.m_nBackImgHeight;
		break;
	case BGIMAGE_CENTER_LEFT:
	case BGIMAGE_CENTER_RIGHT:
	case BGIMAGE_CENTER:
		rcImagePos.top  = area.GetAreaTop() + area.GetAreaHeight()/2 - doc.m_nBackImgHeight/2;
		break;
	default:
		assert_warning(0 != typeConfig.m_backImgPos);
		break;
	}
	rcImagePos.left += typeConfig.m_backImgPosOffset.x;
	rcImagePos.top  += typeConfig.m_backImgPosOffset.y;
	// スクロール時の画面の端を作画するときの位置あたりへ移動
	if( typeConfig.m_backImgScrollX ){
		int tile = typeConfig.m_backImgRepeatX ? doc.m_nBackImgWidth : INT_MAX;
		Int posX = (area.GetViewLeftCol() % tile) * GetTextMetrics().GetCharPxWidth();
		rcImagePos.left -= posX % tile;
	}
	if( typeConfig.m_backImgScrollY ){
		int tile = typeConfig.m_backImgRepeatY ? doc.m_nBackImgHeight : INT_MAX;
		Int posY = (area.GetViewTopLine() % tile) * GetTextMetrics().GetHankakuDy();
		rcImagePos.top -= posY % tile;
	}
	if( typeConfig.m_backImgRepeatX ){
		if( 0 < rcImagePos.left ){
			// rcImagePos.left = rcImagePos.left - (rcImagePos.left / doc.m_nBackImgWidth + 1) * doc.m_nBackImgWidth;
			rcImagePos.left = rcImagePos.left % doc.m_nBackImgWidth - doc.m_nBackImgWidth;
		}
	}
	if( typeConfig.m_backImgRepeatY ){
		if( 0 < rcImagePos.top ){
			// rcImagePos.top = rcImagePos.top - (rcImagePos.top / doc.m_nBackImgHeight + 1) * doc.m_nBackImgHeight;
			rcImagePos.top = rcImagePos.top % doc.m_nBackImgHeight - doc.m_nBackImgHeight;
		}
	}
	rcImagePos.SetSize(doc.m_nBackImgWidth, doc.m_nBackImgHeight);
	
	
	RECT rc = rcPaint;
	// rc.left = t_max((int)rc.left, area.GetAreaLeft());
	rc.top  = t_max((int)rc.top,  area.GetRulerHeight()); // ルーラーを除外
	const int nXEnd = area.GetAreaRight();
	const int nYEnd = area.GetAreaBottom();
	CMyRect rcBltAll;
	rcBltAll.SetLTRB(INT_MAX, INT_MAX, -INT_MAX, -INT_MAX);
	CMyRect rcImagePosOrg = rcImagePos;
	for(; rcImagePos.top <= nYEnd; ){
		for(; rcImagePos.left <= nXEnd; ){
			CMyRect rcBlt;
			if( ::IntersectRect(&rcBlt, &rc, &rcImagePos) ){
				::BitBlt(
					hdc,
					rcBlt.left,
					rcBlt.top,
					rcBlt.right  - rcBlt.left,
					rcBlt.bottom - rcBlt.top,
					hdcBgImg,
					rcBlt.left - rcImagePos.left,
					rcBlt.top - rcImagePos.top,
					SRCCOPY
				);
				rcBltAll.left   = t_min(rcBltAll.left,   rcBlt.left);
				rcBltAll.top    = t_min(rcBltAll.top,    rcBlt.top);
				rcBltAll.right  = t_max(rcBltAll.right,  rcBlt.right);
				rcBltAll.bottom = t_max(rcBltAll.bottom, rcBlt.bottom);
			}
			rcImagePos.left  += doc.m_nBackImgWidth;
			rcImagePos.right += doc.m_nBackImgWidth;
			if( !typeConfig.m_backImgRepeatX ){
				break;
			}
		}
		rcImagePos.left  = rcImagePosOrg.left;
		rcImagePos.right = rcImagePosOrg.right;
		rcImagePos.top    += doc.m_nBackImgHeight;
		rcImagePos.bottom += doc.m_nBackImgHeight;
		if( !typeConfig.m_backImgRepeatY ){
			break;
		}
	}
	if( rcBltAll.left != INT_MAX ){
		// 上下左右ななめの隙間を埋める
		CMyRect rcFill;
		LONG& x1 = rc.left;
		LONG& x2 = rcBltAll.left;
		LONG& x3 = rcBltAll.right;
		LONG& x4 = rc.right;
		LONG& y1 = rc.top;
		LONG& y2 = rcBltAll.top;
		LONG& y3 = rcBltAll.bottom;
		LONG& y4 = rc.bottom;
		if( y1 < y2 ){
			rcFill.SetLTRB(x1,y1, x4,y2); MyFillRect(hdc, rcFill);
		}
		if( x1 < x2 ){
			rcFill.SetLTRB(x1,y2, x2,y3); MyFillRect(hdc, rcFill);
		}
		if( x3 < x4 ){
			rcFill.SetLTRB(x3,y2, x4,y3); MyFillRect(hdc, rcFill);
		}
		if( y3 < y4 ){
			rcFill.SetLTRB(x1,y3, x4,y4); MyFillRect(hdc, rcFill);
		}
	}else{
		MyFillRect(hdc, rc);
	}
	::SetBkColor(hdc, colorOld);
#endif
}