Qt::WindowFrameSection LabyrinthParser::section(const QPoint& p) {
static const float SENSIBILITY_RADIUS(7.0f);
typedef QMap<Qt::WindowFrameSection,QPoint> Corners;
Corners corners;
corners.insert(Qt::TopLeftSection, __rect.topLeft());
corners.insert(Qt::TopRightSection, __rect.topRight());
corners.insert(Qt::BottomLeftSection, __rect.bottomLeft());
corners.insert(Qt::BottomRightSection, __rect.bottomRight());
const Corners::const_iterator nearest(std::min_element(corners.begin(), corners.end(),
[p](const QPoint& a, const QPoint& b)->bool{ return QVector2D(a - p).length() < QVector2D(b - p).length(); }));
if (QVector2D(*nearest - p).length() <= SENSIBILITY_RADIUS) {
return nearest.key();
}
if (abs(p.x() - __rect.left()) <= SENSIBILITY_RADIUS && p.y() < __rect.bottom() && p.y() > __rect.top()) {
return Qt::LeftSection;
}
if (abs(p.y() - __rect.top()) <= SENSIBILITY_RADIUS && p.x() > __rect.left() && p.x() < __rect.right()) {
return Qt::TopSection;
}
if (abs(p.x() - __rect.right()) <= SENSIBILITY_RADIUS && p.y() < __rect.bottom() && p.y() > __rect.top()) {
return Qt::RightSection;
}
if (abs(p.y() - __rect.bottom()) <= SENSIBILITY_RADIUS && p.x() > __rect.left() && p.x() < __rect.right()) {
return Qt::BottomSection;
}
if (__rect.contains(p)) {
return Qt::TitleBarArea;
}
return Qt::NoSection;
}
bool Locator::computeLocalBounds(Locator& source, osg::Vec3d& bottomLeft, osg::Vec3d& topRight) const
{
typedef std::list<osg::Vec3d> Corners;
Corners corners;
osg::Vec3d cornerNDC;
if (Locator::convertLocalCoordBetween(source, osg::Vec3d(0.0,0.0,0.0), *this, cornerNDC))
{
corners.push_back(cornerNDC);
}
if (Locator::convertLocalCoordBetween(source, osg::Vec3d(1.0,0.0,0.0), *this, cornerNDC))
{
corners.push_back(cornerNDC);
}
if (Locator::convertLocalCoordBetween(source, osg::Vec3d(0.0,1.0,0.0), *this, cornerNDC))
{
corners.push_back(cornerNDC);
}
if (Locator::convertLocalCoordBetween(source, osg::Vec3d(1.0,1.0,0.0), *this, cornerNDC))
{
corners.push_back(cornerNDC);
}
if (corners.empty()) return false;
Corners::iterator itr = corners.begin();
bottomLeft.x() = topRight.x() = itr->x();
bottomLeft.y() = topRight.y() = itr->y();
++itr;
for(;
itr != corners.end();
++itr)
{
bottomLeft.x() = osg::minimum( bottomLeft.x(), itr->x());
bottomLeft.y() = osg::minimum( bottomLeft.y(), itr->y());
topRight.x() = osg::maximum( topRight.x(), itr->x());
topRight.y() = osg::maximum( topRight.y(), itr->y());
}
return true;
}
bool getRange(double& min_x, double& min_y, double& max_x, double& max_y) const
{
min_x = DBL_MAX;
max_x = -DBL_MAX;
min_y = DBL_MAX;
max_y = -DBL_MAX;
typedef std::vector<osg::Vec3d> Corners;
Corners corners;
corners.push_back(osg::Vec3d(0.0f,0.0f,0.0f));
corners.push_back(osg::Vec3d(1.0f,0.0f,0.0f));
corners.push_back(osg::Vec3d(1.0f,1.0f,0.0f));
corners.push_back(osg::Vec3d(1.0f,1.0f,0.0f));
for(unsigned int i=0; i<_terrainTiles.size(); ++i)
{
osgTerrain::TerrainTile* tile = _terrainTiles[i].get();
osgTerrain::Locator* locator = tile->getLocator();
if (locator)
{
for(Corners::iterator itr = corners.begin();
itr != corners.end();
++itr)
{
osg::Vec3d& local = *itr;
osg::Vec3d projected = local * locator->getTransform();
if (projected.x()<min_x) min_x = projected.x();
if (projected.x()>max_x) max_x = projected.x();
if (projected.y()<min_y) min_y = projected.y();
if (projected.y()>max_y) max_y = projected.y();
}
}
}
return min_x <= max_x;
}
bool
ExtrudeGeometryFilter::buildStructure(const Geometry* input,
double height,
double heightOffset,
bool flatten,
const SkinResource* wallSkin,
const SkinResource* roofSkin,
Structure& structure,
FilterContext& cx )
{
bool makeECEF = false;
const SpatialReference* srs = 0L;
const SpatialReference* mapSRS = 0L;
if ( cx.isGeoreferenced() )
{
srs = cx.extent()->getSRS();
makeECEF = cx.getSession()->getMapInfo().isGeocentric();
mapSRS = cx.getSession()->getMapInfo().getProfile()->getSRS();
}
// whether this is a closed polygon structure.
structure.isPolygon = (input->getComponentType() == Geometry::TYPE_POLYGON);
// extrusion working variables
double targetLen = -DBL_MAX;
osg::Vec3d minLoc(DBL_MAX, DBL_MAX, DBL_MAX);
double minLoc_len = DBL_MAX;
osg::Vec3d maxLoc(0,0,0);
double maxLoc_len = 0;
// Initial pass over the geometry does two things:
// 1: Calculate the minimum Z across all parts.
// 2: Establish a "target length" for extrusion
double absHeight = fabs(height);
ConstGeometryIterator zfinder( input );
while( zfinder.hasMore() )
{
const Geometry* geom = zfinder.next();
for( Geometry::const_iterator m = geom->begin(); m != geom->end(); ++m )
{
osg::Vec3d m_point = *m;
if ( m_point.z() + absHeight > targetLen )
targetLen = m_point.z() + absHeight;
if (m_point.z() < minLoc.z())
minLoc = m_point;
if (m_point.z() > maxLoc.z())
maxLoc = m_point;
}
}
// apply the height offsets
height -= heightOffset;
targetLen -= heightOffset;
float roofRotation = 0.0f;
Bounds roofBounds;
float sinR = 0.0f, cosR = 0.0f;
double roofTexSpanX = 0.0, roofTexSpanY = 0.0;
osg::ref_ptr<const SpatialReference> roofProjSRS;
if ( roofSkin )
{
roofBounds = input->getBounds();
// if our data is lat/long, we need to reproject the geometry and the bounds into a projected
// coordinate system in order to properly generate tex coords.
if ( srs && srs->isGeographic() )
{
osg::Vec2d geogCenter = roofBounds.center2d();
roofProjSRS = srs->createUTMFromLonLat( Angle(geogCenter.x()), Angle(geogCenter.y()) );
if ( roofProjSRS.valid() )
{
roofBounds.transform( srs, roofProjSRS.get() );
osg::ref_ptr<Geometry> projectedInput = input->clone();
srs->transform( projectedInput->asVector(), roofProjSRS.get() );
roofRotation = getApparentRotation( projectedInput.get() );
}
}
else
{
roofRotation = getApparentRotation( input );
}
sinR = sin(roofRotation);
cosR = cos(roofRotation);
if ( !roofSkin->isTiled().value() )
{
//note: non-tiled roofs don't really work atm.
roofTexSpanX = cosR*roofBounds.width() - sinR*roofBounds.height();
roofTexSpanY = sinR*roofBounds.width() + cosR*roofBounds.height();
}
else
{
roofTexSpanX = roofSkin->imageWidth().isSet() ? *roofSkin->imageWidth() : roofSkin->imageHeight().isSet() ? *roofSkin->imageHeight() : 10.0;
if ( roofTexSpanX <= 0.0 ) roofTexSpanX = 10.0;
roofTexSpanY = roofSkin->imageHeight().isSet() ? *roofSkin->imageHeight() : roofSkin->imageWidth().isSet() ? *roofSkin->imageWidth() : 10.0;
if ( roofTexSpanY <= 0.0 ) roofTexSpanY = 10.0;
}
}
// prep for wall texture coordinate generation.
double texWidthM = wallSkin ? *wallSkin->imageWidth() : 0.0;
double texHeightM = wallSkin ? *wallSkin->imageHeight() : 1.0;
ConstGeometryIterator iter( input );
while( iter.hasMore() )
{
const Geometry* part = iter.next();
// skip a part that's too small
if (part->size() < 2)
continue;
// add a new wall.
structure.elevations.push_back(Elevation());
Elevation& elevation = structure.elevations.back();
double maxHeight = targetLen - minLoc.z();
// Adjust the texture height so it is a multiple of the maximum height
double div = osg::round(maxHeight / texHeightM);
elevation.texHeightAdjustedM = div > 0.0 ? maxHeight / div : maxHeight;
// Step 1 - Create the real corners and transform them into our target SRS.
Corners corners;
for(Geometry::const_iterator m = part->begin(); m != part->end(); ++m)
{
Corners::iterator corner = corners.insert(corners.end(), Corner());
// mark as "from source", as opposed to being inserted by the algorithm.
corner->isFromSource = true;
corner->base = *m;
// extrude:
if ( height >= 0 ) // extrude up
{
if ( flatten )
corner->roof.set( corner->base.x(), corner->base.y(), targetLen );
else
corner->roof.set( corner->base.x(), corner->base.y(), corner->base.z() + height );
}
else // height < 0 .. extrude down
{
corner->roof = *m;
corner->base.z() += height;
}
// figure out the rooftop texture coords before doing any transformation:
if ( roofSkin && srs )
{
double xr, yr;
if ( srs && srs->isGeographic() && roofProjSRS )
{
osg::Vec3d projRoofPt;
srs->transform( corner->roof, roofProjSRS.get(), projRoofPt );
xr = (projRoofPt.x() - roofBounds.xMin());
yr = (projRoofPt.y() - roofBounds.yMin());
}
else
{
xr = (corner->roof.x() - roofBounds.xMin());
yr = (corner->roof.y() - roofBounds.yMin());
}
corner->roofTexU = (cosR*xr - sinR*yr) / roofTexSpanX;
corner->roofTexV = (sinR*xr + cosR*yr) / roofTexSpanY;
}
// transform into target SRS.
transformAndLocalize( corner->base, srs, corner->base, mapSRS, _world2local, makeECEF );
transformAndLocalize( corner->roof, srs, corner->roof, mapSRS, _world2local, makeECEF );
}
// Step 2 - Insert intermediate Corners as needed to satify texturing
// requirements (if necessary) and record each corner offset (horizontal distance
// from the beginning of the part geometry to the corner.)
double cornerOffset = 0.0;
double nextTexBoundary = texWidthM;
for(Corners::iterator c = corners.begin(); c != corners.end(); ++c)
{
Corners::iterator this_corner = c;
Corners::iterator next_corner = c;
if ( ++next_corner == corners.end() )
next_corner = corners.begin();
osg::Vec3d base_vec = next_corner->base - this_corner->base;
double span = base_vec.length();
this_corner->offsetX = cornerOffset;
if (wallSkin)
{
base_vec /= span; // normalize
osg::Vec3d roof_vec = next_corner->roof - this_corner->roof;
roof_vec.normalize();
while(nextTexBoundary < cornerOffset+span)
{
// insert a new fake corner.
Corners::iterator new_corner = corners.insert(next_corner, Corner());
new_corner->isFromSource = false;
double advance = nextTexBoundary-cornerOffset;
new_corner->base = this_corner->base + base_vec*advance;
new_corner->roof = this_corner->roof + roof_vec*advance;
new_corner->offsetX = cornerOffset + advance;
nextTexBoundary += texWidthM;
// advance the main iterator
c = new_corner;
}
}
cornerOffset += span;
}
// Step 3 - Calculate the angle of each corner.
osg::Vec3d prev_vec;
for(Corners::iterator c = corners.begin(); c != corners.end(); ++c)
{
Corners::const_iterator this_corner = c;
Corners::const_iterator next_corner = c;
if ( ++next_corner == corners.end() )
next_corner = corners.begin();
if ( this_corner == corners.begin() )
{
Corners::const_iterator prev_corner = corners.end();
--prev_corner;
prev_vec = this_corner->roof - prev_corner->roof;
prev_vec.normalize();
}
osg::Vec3d this_vec = next_corner->roof - this_corner->roof;
this_vec.normalize();
if ( c != corners.begin() )
{
c->cosAngle = prev_vec * this_vec;
}
}
// Step 4 - Create faces connecting each pair of Posts.
Faces& faces = elevation.faces;
for(Corners::const_iterator c = corners.begin(); c != corners.end(); ++c)
{
Corners::const_iterator this_corner = c;
Corners::const_iterator next_corner = c;
if ( ++next_corner == corners.end() )
next_corner = corners.begin();
// only close the shape for polygons.
if (next_corner != corners.begin() || structure.isPolygon)
{
faces.push_back(Face());
Face& face = faces.back();
face.left = *this_corner;
face.right = *next_corner;
// recalculate the final offset on the last face
if ( next_corner == corners.begin() )
{
osg::Vec3d vec = next_corner->roof - this_corner->roof;
face.right.offsetX = face.left.offsetX + vec.length();
}
face.widthM = next_corner->offsetX - this_corner->offsetX;
}
}
}
return true;
}
bool Locator::computeLocalBounds(osg::Vec3d& bottomLeft, osg::Vec3d& topRight) const
{
OSG_NOTICE<<"Locator::computeLocalBounds"<<std::endl;
typedef std::list<osg::Vec3d> Corners;
Corners corners;
osg::Vec3d cornerNDC;
if (convertLocalToModel(osg::Vec3d(0.0,0.0,0.0), cornerNDC))
{
corners.push_back(cornerNDC);
}
if (convertLocalToModel(osg::Vec3d(1.0,0.0,0.0), cornerNDC))
{
corners.push_back(cornerNDC);
}
if (convertLocalToModel(osg::Vec3d(0.0,1.0,0.0), cornerNDC))
{
corners.push_back(cornerNDC);
}
if (convertLocalToModel(osg::Vec3d(1.0,1.0,0.0), cornerNDC))
{
corners.push_back(cornerNDC);
}
if (convertLocalToModel(osg::Vec3d(0.0,0.0,1.0), cornerNDC))
{
corners.push_back(cornerNDC);
}
if (convertLocalToModel(osg::Vec3d(1.0,0.0,1.0), cornerNDC))
{
corners.push_back(cornerNDC);
}
if (convertLocalToModel(osg::Vec3d(0.0,1.0,1.0), cornerNDC))
{
corners.push_back(cornerNDC);
}
if (convertLocalToModel(osg::Vec3d(1.0,1.0,1.0), cornerNDC))
{
corners.push_back(cornerNDC);
}
if (corners.empty()) return false;
Corners::iterator itr = corners.begin();
bottomLeft.x() = topRight.x() = itr->x();
bottomLeft.y() = topRight.y() = itr->y();
bottomLeft.z() = topRight.z() = itr->z();
++itr;
for(;
itr != corners.end();
++itr)
{
bottomLeft.x() = osg::minimum( bottomLeft.x(), itr->x());
bottomLeft.y() = osg::minimum( bottomLeft.y(), itr->y());
bottomLeft.z() = osg::minimum( bottomLeft.z(), itr->z());
topRight.x() = osg::maximum( topRight.x(), itr->x());
topRight.y() = osg::maximum( topRight.y(), itr->y());
topRight.z() = osg::maximum( topRight.z(), itr->z());
}
return true;
}