/* abort function in moving outline.
*/
static void Abort_Move_ModuleOutline( EDA_DRAW_PANEL* Panel, wxDC* DC )
{
EDGE_MODULE* edge = (EDGE_MODULE*) Panel->GetScreen()->GetCurItem();
Panel->SetMouseCapture( NULL, NULL );
if( edge && ( edge->Type() == PCB_MODULE_EDGE_T ) )
{
if( edge->IsNew() ) // On aborting, delete new outline.
{
MODULE* module = (MODULE*) edge->GetParent();
edge->Draw( Panel, DC, GR_XOR, MoveVector );
edge->DeleteStructure();
module->CalculateBoundingBox();
}
else // On aborting, move existing outline to its initial position.
{
edge->Draw( Panel, DC, GR_XOR, MoveVector );
edge->ClearFlags();
edge->Draw( Panel, DC, GR_OR );
}
}
Panel->GetScreen()->SetCurItem( NULL );
}
/* Redraw the current graphic item during its creation
* Use this function to show a new outline, in begin command
*/
static void ShowNewEdgeModule( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
bool aErase )
{
BASE_SCREEN* screen = aPanel->GetScreen();
EDGE_MODULE* edge = (EDGE_MODULE*) screen->GetCurItem();
if( edge == NULL )
return;
MODULE* module = (MODULE*) edge->GetParent();
// if( erase )
{
edge->Draw( aPanel, aDC, GR_XOR );
}
edge->SetEnd( aPanel->GetParent()->GetCrossHairPosition() );
// Update relative coordinate.
edge->SetEnd0( edge->GetEnd() - module->GetPosition() );
wxPoint pt( edge->GetEnd0() );
RotatePoint( &pt, -module->GetOrientation() );
edge->SetEnd0( pt );
edge->Draw( aPanel, aDC, GR_XOR );
module->CalculateBoundingBox();
}
static void Move_Segment(WinEDA_DrawPanel * panel, wxDC * DC, bool erase)
/************************************************************************/
/* redessin du contour du Segment Edge lors des deplacements de la souris */
{
BASE_SCREEN * screen = panel->GetScreen();
EDGE_MODULE * Edge = (EDGE_MODULE * ) screen->m_CurrentItem;
if( Edge == NULL ) return;
MODULE * Module = (MODULE*) Edge->m_Parent;
screen->Trace_Curseur(panel, DC);
if( erase )
{
Edge->Draw(panel, DC, MoveVector, GR_XOR);
}
MoveVector.x = -(screen->m_Curseur.x - CursorInitialPosition.x);
MoveVector.y = -(screen->m_Curseur.y - CursorInitialPosition.y);
Edge->Draw(panel, DC, MoveVector, GR_XOR);
screen->Trace_Curseur(panel, DC);
Module->Set_Rectangle_Encadrement();
}
static void Exit_EditEdge_Module(WinEDA_DrawFrame * frame, wxDC * DC)
/******************************************************************/
{
EDGE_MODULE * Edge = (EDGE_MODULE * ) frame->GetScreen()->m_CurrentItem;
if( Edge && (Edge->m_StructType == TYPEEDGEMODULE) ) /* error si non */
{
if (Edge->m_Flags & IS_NEW) /* effacement du nouveau contour */
{
MODULE * Module = (MODULE *) Edge->m_Parent;
Edge->Draw(frame->DrawPanel, DC, MoveVector, GR_XOR);
DeleteStructure(Edge);
Module->Set_Rectangle_Encadrement();
}
else
{
Edge->Draw(frame->DrawPanel, DC, MoveVector, GR_XOR);
Edge->m_Flags = 0;
Edge->Draw(frame->DrawPanel, DC, wxPoint(0, 0), GR_OR);
}
}
frame->GetScreen()->ManageCurseur = NULL;
frame->GetScreen()->ForceCloseManageCurseur = NULL;
frame->GetScreen()->m_CurrentItem = NULL;
}
static void ShowEdgeModule(WinEDA_DrawPanel * panel, wxDC * DC, bool erase)
/************************************************************************/
/* Affiche le segment Edge Module en cours de trace
*/
{
BASE_SCREEN * screen = panel->GetScreen();
EDGE_MODULE * Edge = (EDGE_MODULE * ) screen->m_CurrentItem;
if( Edge == NULL ) return;
MODULE * Module = (MODULE*) Edge->m_Parent;
screen->Trace_Curseur(panel, DC);
// if( erase )
{
Edge->Draw(panel, DC, wxPoint(0, 0), GR_XOR);
}
Edge->m_End = screen->m_Curseur;
/* Mise a jour des coord relatives */
Edge->m_End0.x = Edge->m_End.x - Module->m_Pos.x;
Edge->m_End0.y = Edge->m_End.y - Module->m_Pos.y ;
RotatePoint((int*)&Edge->m_End0.x,
(int*)&Edge->m_End0.y, - Module->m_Orient);
Edge->Draw(panel, DC, wxPoint(0, 0), GR_XOR);
screen->Trace_Curseur(panel, DC);
Module->Set_Rectangle_Encadrement();
}
/* Redraw the current moved graphic item when mouse is moving
* Use this function to show an existing outline, in move command
*/
static void ShowCurrentOutlineWhileMoving( EDA_DRAW_PANEL* aPanel, wxDC* aDC,
const wxPoint& aPosition, bool aErase )
{
BASE_SCREEN* screen = aPanel->GetScreen();
EDGE_MODULE* edge = (EDGE_MODULE*) screen->GetCurItem();
if( edge == NULL )
return;
MODULE* module = (MODULE*) edge->GetParent();
if( aErase )
{
edge->Draw( aPanel, aDC, GR_XOR, MoveVector );
}
MoveVector = -(aPanel->GetParent()->GetCrossHairPosition() - CursorInitialPosition);
edge->Draw( aPanel, aDC, GR_XOR, MoveVector );
module->CalculateBoundingBox();
}
static void Print_Module( EDA_DRAW_PANEL* aPanel, wxDC* aDC, MODULE* aModule,
GR_DRAWMODE aDraw_mode, LSET aMask,
PRINT_PARAMETERS::DrillShapeOptT aDrillShapeOpt )
{
// Print pads
for( D_PAD* pad = aModule->Pads(); pad; pad = pad->Next() )
{
if( !( pad->GetLayerSet() & aMask ).any() )
continue;
// Manage hole according to the print drill option
wxSize drill_tmp = pad->GetDrillSize();
switch( aDrillShapeOpt )
{
case PRINT_PARAMETERS::NO_DRILL_SHAPE:
pad->SetDrillSize( wxSize(0,0) );
break;
case PRINT_PARAMETERS::SMALL_DRILL_SHAPE:
{
wxSize sz( std::min( SMALL_DRILL, pad->GetDrillSize().x ),
std::min( SMALL_DRILL, pad->GetDrillSize().y ) );
pad->SetDrillSize( sz );
}
break;
case PRINT_PARAMETERS::FULL_DRILL_SHAPE:
// Do nothing
break;
}
pad->Draw( aPanel, aDC, aDraw_mode );
pad->SetDrillSize( drill_tmp );
}
// Print footprint graphic shapes
LSET mlayer( aModule->GetLayer() );
if( aModule->GetLayer() == B_Cu )
mlayer = LSET( B_SilkS );
else if( aModule->GetLayer() == F_Cu )
mlayer = LSET( F_SilkS );
if( ( mlayer & aMask ).any() )
{
if( aModule->Reference().IsVisible() )
aModule->Reference().Draw( aPanel, aDC, aDraw_mode );
if( aModule->Value().IsVisible() )
aModule->Value().Draw( aPanel, aDC, aDraw_mode );
}
for( EDA_ITEM* item = aModule->GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
{
if( !( mlayer & aMask ).any() )
break;
TEXTE_MODULE* textMod = static_cast<TEXTE_MODULE*>( item );
textMod->Draw( aPanel, aDC, aDraw_mode );
break;
}
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = static_cast<EDGE_MODULE*>( item );
if( !aMask[edge->GetLayer()] )
break;
edge->Draw( aPanel, aDC, aDraw_mode );
}
break;
default:
break;
}
}
}