Esempio n. 1
0
File: FrontPage.c Progetto: pmj/edk2
/**
  This function is the main entry of the UI entry.
  The function will present the main menu of the system UI.

  @param ConnectAllHappened Caller passes the value to UI to avoid unnecessary connect-all.

**/
VOID
EFIAPI
UiEntry (
  IN BOOLEAN                      ConnectAllHappened
  )
{
  EFI_STATUS                    Status;
  EFI_BOOT_LOGO_PROTOCOL        *BootLogo;

  //
  // Enter Setup page.
  //
  REPORT_STATUS_CODE (
    EFI_PROGRESS_CODE,
    (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_PC_USER_SETUP)
    );

  //
  // Indicate if the connect all has been performed before.
  // If has not been performed before, do here.
  //
  if (!ConnectAllHappened) {
    EfiBootManagerConnectAll ();
  }

  //
  // The boot option enumeration time is acceptable in Ui driver
  //
  EfiBootManagerRefreshAllBootOption ();

  //
  // Boot Logo is corrupted, report it using Boot Logo protocol.
  //
  Status = gBS->LocateProtocol (&gEfiBootLogoProtocolGuid, NULL, (VOID **) &BootLogo);
  if (!EFI_ERROR (Status) && (BootLogo != NULL)) {
    BootLogo->SetBootLogo (BootLogo, NULL, 0, 0, 0, 0);
  }

  InitializeFrontPage ();

  CallFrontPage ();

  FreeFrontPage ();

  if (mLanguageString != NULL) {
    FreePool (mLanguageString);
    mLanguageString = NULL;
  }

  //
  //Will leave browser, check any reset required change is applied? if yes, reset system
  //
  SetupResetReminder ();
}
Esempio n. 2
0
/**
  This function is the main entry of the UI entry.
  The function will present the main menu of the system UI.

  @param ConnectAllHappened Caller passes the value to UI to avoid unnecessary connect-all.

**/
VOID
EFIAPI
UiEntry (
  IN BOOLEAN                      ConnectAllHappened
  )
{
  EFI_STATUS                    Status;
  EFI_BOOT_LOGO_PROTOCOL        *BootLogo;

  //
  // Indicate if the connect all has been performed before.
  //
  if (ConnectAllHappened) {
    gConnectAllHappened = TRUE;
  }

  //
  // The boot option enumeration time is acceptable in Ui driver
  //
  EfiBootManagerRefreshAllBootOption ();

  //
  // Boot Logo is corrupted, report it using Boot Logo protocol.
  //
  Status = gBS->LocateProtocol (&gEfiBootLogoProtocolGuid, NULL, (VOID **) &BootLogo);
  if (!EFI_ERROR (Status) && (BootLogo != NULL)) {
    BootLogo->SetBootLogo (BootLogo, NULL, 0, 0, 0, 0);
  }

  InitializeFrontPage ();
  InitializeDeviceManager ();
  InitializeBootManager ();
  InitBootMaintenance();

  CallFrontPage ();

  FreeBMPackage ();
  FreeBootManager ();
  FreeDeviceManager ();
  FreeFrontPage ();

  if (mLanguageString != NULL) {
    FreePool (mLanguageString);
    mLanguageString = NULL;
  }

  //
  //Will leave browser, check any reset required change is applied? if yes, reset system
  //
  SetupResetReminder ();
}
Esempio n. 3
0
/**
  This function is the main entry of the platform setup entry.
  The function will present the main menu of the system setup,
  this is the platform reference part and can be customize.


  @param TimeoutDefault     The fault time out value before the system
                            continue to boot.
  @param ConnectAllHappened The indicater to check if the connect all have
                            already happened.

**/
VOID
PlatformBdsEnterFrontPage (
  IN UINT16                       TimeoutDefault,
  IN BOOLEAN                      ConnectAllHappened
  )
{
  EFI_STATUS                         Status;
  EFI_STATUS                         StatusHotkey; 
  EFI_BOOT_LOGO_PROTOCOL             *BootLogo;
  EFI_GRAPHICS_OUTPUT_PROTOCOL       *GraphicsOutput;
  EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL    *SimpleTextOut;
  UINTN                              BootTextColumn;
  UINTN                              BootTextRow;
  UINT64                             OsIndication;
  UINTN                              DataSize;
  EFI_INPUT_KEY                      Key;

  GraphicsOutput = NULL;
  SimpleTextOut = NULL;

  PERF_START (NULL, "BdsTimeOut", "BDS", 0);
  //
  // Indicate if we need connect all in the platform setup
  //
  if (ConnectAllHappened) {
    gConnectAllHappened = TRUE;
  }

  if (!mModeInitialized) {
    //
    // After the console is ready, get current video resolution 
    // and text mode before launching setup at first time.
    //
    Status = gBS->HandleProtocol (
                    gST->ConsoleOutHandle,
                    &gEfiGraphicsOutputProtocolGuid,
                    (VOID**)&GraphicsOutput
                    );
    if (EFI_ERROR (Status)) {
      GraphicsOutput = NULL;
    }
    
    Status = gBS->HandleProtocol (
                    gST->ConsoleOutHandle,
                    &gEfiSimpleTextOutProtocolGuid,
                    (VOID**)&SimpleTextOut
                    );
    if (EFI_ERROR (Status)) {
      SimpleTextOut = NULL;
    }  

    if (GraphicsOutput != NULL) {
      //
      // Get current video resolution and text mode.
      //
      mBootHorizontalResolution = GraphicsOutput->Mode->Info->HorizontalResolution;
      mBootVerticalResolution   = GraphicsOutput->Mode->Info->VerticalResolution;
    }

    if (SimpleTextOut != NULL) {
      Status = SimpleTextOut->QueryMode (
                                SimpleTextOut,
                                SimpleTextOut->Mode->Mode,
                                &BootTextColumn,
                                &BootTextRow
                                );
      mBootTextModeColumn = (UINT32)BootTextColumn;
      mBootTextModeRow    = (UINT32)BootTextRow;
    }

    //
    // Get user defined text mode for setup.
    //  
    mSetupHorizontalResolution = PcdGet32 (PcdSetupVideoHorizontalResolution);
    mSetupVerticalResolution   = PcdGet32 (PcdSetupVideoVerticalResolution);      
    mSetupTextModeColumn       = PcdGet32 (PcdSetupConOutColumn);
    mSetupTextModeRow          = PcdGet32 (PcdSetupConOutRow);

    mModeInitialized           = TRUE;
  }


  //
  // goto FrontPage directly when EFI_OS_INDICATIONS_BOOT_TO_FW_UI is set
  //
  OsIndication = 0;
  DataSize = sizeof(UINT64);
  Status = gRT->GetVariable (
                  L"OsIndications",
                  &gEfiGlobalVariableGuid,
                  NULL,
                  &DataSize,
                  &OsIndication
                  );

  //
  // goto FrontPage directly when EFI_OS_INDICATIONS_BOOT_TO_FW_UI is set. Skip HotkeyBoot
  //
  if (!EFI_ERROR(Status) && ((OsIndication & EFI_OS_INDICATIONS_BOOT_TO_FW_UI) != 0)) {
    //
    // Clear EFI_OS_INDICATIONS_BOOT_TO_FW_UI to acknowledge OS
    // 
    OsIndication &= ~((UINT64)EFI_OS_INDICATIONS_BOOT_TO_FW_UI);
    Status = gRT->SetVariable (
                    L"OsIndications",
                    &gEfiGlobalVariableGuid,
                    EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
                    sizeof(UINT64),
                    &OsIndication
                    );
    //
    // Changing the content without increasing its size with current variable implementation shouldn't fail.
    //
    ASSERT_EFI_ERROR (Status);

    //
    // Follow generic rule, Call ReadKeyStroke to connect ConIn before enter UI
    //
    if (PcdGetBool (PcdConInConnectOnDemand)) {
      gST->ConIn->ReadKeyStroke(gST->ConIn, &Key);
    }

    //
    // Ensure screen is clear when switch Console from Graphics mode to Text mode
    //
    gST->ConOut->EnableCursor (gST->ConOut, TRUE);
    gST->ConOut->ClearScreen (gST->ConOut);

  } else {

    HotkeyBoot ();
    if (TimeoutDefault != 0xffff) {
      Status = ShowProgress (TimeoutDefault);
      StatusHotkey = HotkeyBoot ();

      if (!FeaturePcdGet(PcdBootlogoOnlyEnable) || !EFI_ERROR(Status) || !EFI_ERROR(StatusHotkey)){
        //
        // Ensure screen is clear when switch Console from Graphics mode to Text mode
        // Skip it in normal boot 
        //
        gST->ConOut->EnableCursor (gST->ConOut, TRUE);
        gST->ConOut->ClearScreen (gST->ConOut);
      }

      if (EFI_ERROR (Status)) {
        //
        // Timeout or user press enter to continue
        //
        goto Exit;
      }
    }
  }

  //
  // Boot Logo is corrupted, report it using Boot Logo protocol.
  //
  Status = gBS->LocateProtocol (&gEfiBootLogoProtocolGuid, NULL, (VOID **) &BootLogo);
  if (!EFI_ERROR (Status) && (BootLogo != NULL)) {
    BootLogo->SetBootLogo (BootLogo, NULL, 0, 0, 0, 0);
  }

  //
  // Install BM HiiPackages. 
  // Keep BootMaint HiiPackage, so that it can be covered by global setting. 
  //
  InitBMPackage ();

  Status = EFI_SUCCESS;
  do {
    //
    // Set proper video resolution and text mode for setup
    //
    BdsSetConsoleMode (TRUE);
    
    InitializeFrontPage (FALSE);

    //
    // Update Front Page strings
    //
    UpdateFrontPageStrings ();

    gCallbackKey = 0;
    CallFrontPage ();

    //
    // If gCallbackKey is greater than 1 and less or equal to 5,
    // it will launch configuration utilities.
    // 2 = set language
    // 3 = boot manager
    // 4 = device manager
    // 5 = boot maintenance manager
    //
    if (gCallbackKey != 0) {
      REPORT_STATUS_CODE (
        EFI_PROGRESS_CODE,
        (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_PC_USER_SETUP)
        );
    }
    //
    // Based on the key that was set, we can determine what to do
    //
    switch (gCallbackKey) {
    //
    // The first 4 entries in the Front Page are to be GUARANTEED to remain constant so IHV's can
    // describe to their customers in documentation how to find their setup information (namely
    // under the device manager and specific buckets)
    //
    // These entries consist of the Continue, Select language, Boot Manager, and Device Manager
    //
    case FRONT_PAGE_KEY_CONTINUE:
      //
      // User hit continue
      //
      break;

    case FRONT_PAGE_KEY_LANGUAGE:
      //
      // User made a language setting change - display front page again
      //
      break;

    case FRONT_PAGE_KEY_BOOT_MANAGER:
      //
      // Remove the installed BootMaint HiiPackages when exit.
      //
      FreeBMPackage ();

      //
      // User chose to run the Boot Manager
      //
      CallBootManager ();

      //
      // Reinstall BootMaint HiiPackages after exiting from Boot Manager.
      //
      InitBMPackage ();
      break;

    case FRONT_PAGE_KEY_DEVICE_MANAGER:
      //
      // Display the Device Manager
      //
      do {
        CallDeviceManager ();
      } while (gCallbackKey == FRONT_PAGE_KEY_DEVICE_MANAGER);
      break;

    case FRONT_PAGE_KEY_BOOT_MAINTAIN:
      //
      // Display the Boot Maintenance Manager
      //
      BdsStartBootMaint ();
      break;
    }

  } while ((Status == EFI_SUCCESS) && (gCallbackKey != FRONT_PAGE_KEY_CONTINUE));

  if (mLanguageString != NULL) {
    FreePool (mLanguageString);
    mLanguageString = NULL;
  }
  //
  //Will leave browser, check any reset required change is applied? if yes, reset system
  //
  SetupResetReminder ();

  //
  // Remove the installed BootMaint HiiPackages when exit.
  //
  FreeBMPackage ();

Exit:
  //
  // Automatically load current entry
  // Note: The following lines of code only execute when Auto boot
  // takes affect
  //
  PERF_END (NULL, "BdsTimeOut", "BDS", 0);
}
Esempio n. 4
0
/**
  Use SystemTable Conout to stop video based Simple Text Out consoles from going
  to the video device. Put up LogoFile on every video device that is a console.

  @param[in]  LogoFile   File name of logo to display on the center of the screen.

  @retval EFI_SUCCESS     ConsoleControl has been flipped to graphics and logo displayed.
  @retval EFI_UNSUPPORTED Logo not found

**/
EFI_STATUS
EFIAPI
EnableQuietBoot (
  IN  EFI_GUID  *LogoFile
  )
{
  EFI_STATUS                    Status;
  EFI_OEM_BADGING_PROTOCOL      *Badging;
  UINT32                        SizeOfX;
  UINT32                        SizeOfY;
  INTN                          DestX;
  INTN                          DestY;
  UINT8                         *ImageData;
  UINTN                         ImageSize;
  UINTN                         BltSize;
  UINT32                        Instance;
  EFI_BADGING_FORMAT            Format;
  EFI_BADGING_DISPLAY_ATTRIBUTE Attribute;
  UINTN                         CoordinateX;
  UINTN                         CoordinateY;
  UINTN                         Height;
  UINTN                         Width;
  EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Blt;
  EFI_UGA_DRAW_PROTOCOL         *UgaDraw;
  UINT32                        ColorDepth;
  UINT32                        RefreshRate;
  EFI_GRAPHICS_OUTPUT_PROTOCOL  *GraphicsOutput;
  EFI_BOOT_LOGO_PROTOCOL        *BootLogo;
  UINTN                         NumberOfLogos;
  EFI_GRAPHICS_OUTPUT_BLT_PIXEL *LogoBlt;
  UINTN                         LogoDestX;
  UINTN                         LogoDestY;
  UINTN                         LogoHeight;
  UINTN                         LogoWidth;
  UINTN                         NewDestX;
  UINTN                         NewDestY;
  UINTN                         NewHeight;
  UINTN                         NewWidth;
  UINT64                        BufferSize;

  UgaDraw = NULL;
  //
  // Try to open GOP first
  //
  Status = gBS->HandleProtocol (gST->ConsoleOutHandle, &gEfiGraphicsOutputProtocolGuid, (VOID **) &GraphicsOutput);
  if (EFI_ERROR (Status) && FeaturePcdGet (PcdUgaConsumeSupport)) {
    GraphicsOutput = NULL;
    //
    // Open GOP failed, try to open UGA
    //
    Status = gBS->HandleProtocol (gST->ConsoleOutHandle, &gEfiUgaDrawProtocolGuid, (VOID **) &UgaDraw);
  }
  if (EFI_ERROR (Status)) {
    return EFI_UNSUPPORTED;
  }

  //
  // Try to open Boot Logo Protocol.
  //
  BootLogo = NULL;
  gBS->LocateProtocol (&gEfiBootLogoProtocolGuid, NULL, (VOID **) &BootLogo);

  //
  // Erase Cursor from screen
  //
  gST->ConOut->EnableCursor (gST->ConOut, FALSE);

  Badging = NULL;
  Status  = gBS->LocateProtocol (&gEfiOEMBadgingProtocolGuid, NULL, (VOID **) &Badging);

  if (GraphicsOutput != NULL) {
    SizeOfX = GraphicsOutput->Mode->Info->HorizontalResolution;
    SizeOfY = GraphicsOutput->Mode->Info->VerticalResolution;

  } else if (UgaDraw != NULL && FeaturePcdGet (PcdUgaConsumeSupport)) {
    Status = UgaDraw->GetMode (UgaDraw, &SizeOfX, &SizeOfY, &ColorDepth, &RefreshRate);
    if (EFI_ERROR (Status)) {
      return EFI_UNSUPPORTED;
    }
  } else {
    return EFI_UNSUPPORTED;
  }

  Blt = NULL;
  NumberOfLogos = 0;
  LogoDestX = 0;
  LogoDestY = 0;
  LogoHeight = 0;
  LogoWidth = 0;
  NewDestX = 0;
  NewDestY = 0;
  NewHeight = 0;
  NewWidth = 0;
  Instance = 0;
  while (1) {
    ImageData = NULL;
    ImageSize = 0;

    if (Badging != NULL) {
      //
      // Get image from OEMBadging protocol.
      //
      Status = Badging->GetImage (
                          Badging,
                          &Instance,
                          &Format,
                          &ImageData,
                          &ImageSize,
                          &Attribute,
                          &CoordinateX,
                          &CoordinateY
                          );
      if (EFI_ERROR (Status)) {
        goto Done;
      }

      //
      // Currently only support BMP format.
      //
      if (Format != EfiBadgingFormatBMP) {
        if (ImageData != NULL) {
          FreePool (ImageData);
        }
        continue;
      }
    } else {
      //
      // Get the specified image from FV.
      //
      Status = GetSectionFromAnyFv (LogoFile, EFI_SECTION_RAW, 0, (VOID **) &ImageData, &ImageSize);
      if (EFI_ERROR (Status)) {
        return EFI_UNSUPPORTED;
      }

      CoordinateX = 0;
      CoordinateY = 0;
      if (!FeaturePcdGet(PcdBootlogoOnlyEnable)) {
        Attribute   = EfiBadgingDisplayAttributeCenter;
      } else {
        Attribute   = EfiBadgingDisplayAttributeCustomized;
      } 
    }

    if (Blt != NULL) {
      FreePool (Blt);
    }
    Blt = NULL;
    Status = TranslateBmpToGopBlt (
              ImageData,
              ImageSize,
              &Blt,
              &BltSize,
              &Height,
              &Width
              );
    if (EFI_ERROR (Status)) {
      FreePool (ImageData);

      if (Badging == NULL) {
        return Status;
      } else {
        continue;
      }
    }

    //
    // Calculate the display position according to Attribute.
    //
    switch (Attribute) {
    case EfiBadgingDisplayAttributeLeftTop:
      DestX = CoordinateX;
      DestY = CoordinateY;
      break;

    case EfiBadgingDisplayAttributeCenterTop:
      DestX = (SizeOfX - Width) / 2;
      DestY = CoordinateY;
      break;

    case EfiBadgingDisplayAttributeRightTop:
      DestX = (SizeOfX - Width - CoordinateX);
      DestY = CoordinateY;;
      break;

    case EfiBadgingDisplayAttributeCenterRight:
      DestX = (SizeOfX - Width - CoordinateX);
      DestY = (SizeOfY - Height) / 2;
      break;

    case EfiBadgingDisplayAttributeRightBottom:
      DestX = (SizeOfX - Width - CoordinateX);
      DestY = (SizeOfY - Height - CoordinateY);
      break;

    case EfiBadgingDisplayAttributeCenterBottom:
      DestX = (SizeOfX - Width) / 2;
      DestY = (SizeOfY - Height - CoordinateY);
      break;

    case EfiBadgingDisplayAttributeLeftBottom:
      DestX = CoordinateX;
      DestY = (SizeOfY - Height - CoordinateY);
      break;

    case EfiBadgingDisplayAttributeCenterLeft:
      DestX = CoordinateX;
      DestY = (SizeOfY - Height) / 2;
      break;

    case EfiBadgingDisplayAttributeCenter:
      DestX = (SizeOfX - Width) / 2;
      DestY = (SizeOfY - Height) / 2;
      break;

    case EfiBadgingDisplayAttributeCustomized:
      DestX = (SizeOfX - Width) / 2;
      DestY = ((SizeOfY * 382) / 1000) - Height / 2;
      break;

    default:
      DestX = CoordinateX;
      DestY = CoordinateY;
      break;
    }

    if ((DestX >= 0) && (DestY >= 0)) {
      if (GraphicsOutput != NULL) {
        Status = GraphicsOutput->Blt (
                            GraphicsOutput,
                            Blt,
                            EfiBltBufferToVideo,
                            0,
                            0,
                            (UINTN) DestX,
                            (UINTN) DestY,
                            Width,
                            Height,
                            Width * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
                            );
      } else if (UgaDraw != NULL && FeaturePcdGet (PcdUgaConsumeSupport)) {
        Status = UgaDraw->Blt (
                            UgaDraw,
                            (EFI_UGA_PIXEL *) Blt,
                            EfiUgaBltBufferToVideo,
                            0,
                            0,
                            (UINTN) DestX,
                            (UINTN) DestY,
                            Width,
                            Height,
                            Width * sizeof (EFI_UGA_PIXEL)
                            );
      } else {
        Status = EFI_UNSUPPORTED;
      }

      //
      // Report displayed Logo information.
      //
      if (!EFI_ERROR (Status)) {
        NumberOfLogos++;

        if (LogoWidth == 0) {
          //
          // The first Logo.
          //
          LogoDestX = (UINTN) DestX;
          LogoDestY = (UINTN) DestY;
          LogoWidth = Width;
          LogoHeight = Height;
        } else {
          //
          // Merge new logo with old one.
          //
          NewDestX = MIN ((UINTN) DestX, LogoDestX);
          NewDestY = MIN ((UINTN) DestY, LogoDestY);
          NewWidth = MAX ((UINTN) DestX + Width, LogoDestX + LogoWidth) - NewDestX;
          NewHeight = MAX ((UINTN) DestY + Height, LogoDestY + LogoHeight) - NewDestY;

          LogoDestX = NewDestX;
          LogoDestY = NewDestY;
          LogoWidth = NewWidth;
          LogoHeight = NewHeight;
        }
      }
    }

    FreePool (ImageData);

    if (Badging == NULL) {
      break;
    }
  }

Done:
  if (BootLogo == NULL || NumberOfLogos == 0) {
    //
    // No logo displayed.
    //
    if (Blt != NULL) {
      FreePool (Blt);
    }

    return Status;
  }

  //
  // Advertise displayed Logo information.
  //
  if (NumberOfLogos == 1) {
    //
    // Only one logo displayed, use its Blt buffer directly for BootLogo protocol.
    //
    LogoBlt = Blt;
    Status = EFI_SUCCESS;
  } else {
    //
    // More than one Logo displayed, get merged BltBuffer using VideoToBuffer operation. 
    //
    if (Blt != NULL) {
      FreePool (Blt);
    }

    //
    // Ensure the LogoHeight * LogoWidth doesn't overflow
    //
    if (LogoHeight > DivU64x64Remainder ((UINTN) ~0, LogoWidth, NULL)) {
      return EFI_UNSUPPORTED;
    }
    BufferSize = MultU64x64 (LogoWidth, LogoHeight);

    //
    // Ensure the BufferSize * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL) doesn't overflow
    //
    if (BufferSize > DivU64x32 ((UINTN) ~0, sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL))) {
      return EFI_UNSUPPORTED;
    }

    LogoBlt = AllocateZeroPool ((UINTN)BufferSize * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
    if (LogoBlt == NULL) {
      return EFI_OUT_OF_RESOURCES;
    }

    if (GraphicsOutput != NULL) {
      Status = GraphicsOutput->Blt (
                          GraphicsOutput,
                          LogoBlt,
                          EfiBltVideoToBltBuffer,
                          LogoDestX,
                          LogoDestY,
                          0,
                          0,
                          LogoWidth,
                          LogoHeight,
                          LogoWidth * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
                          );
    } else if (UgaDraw != NULL && FeaturePcdGet (PcdUgaConsumeSupport)) {
      Status = UgaDraw->Blt (
                          UgaDraw,
                          (EFI_UGA_PIXEL *) LogoBlt,
                          EfiUgaVideoToBltBuffer,
                          LogoDestX,
                          LogoDestY,
                          0,
                          0,
                          LogoWidth,
                          LogoHeight,
                          LogoWidth * sizeof (EFI_UGA_PIXEL)
                          );
    } else {
      Status = EFI_UNSUPPORTED;
    }
  }

  if (!EFI_ERROR (Status)) {
    BootLogo->SetBootLogo (BootLogo, LogoBlt, LogoDestX, LogoDestY, LogoWidth, LogoHeight);
  }
  FreePool (LogoBlt);

  return Status;
}