virtual void GetDynamicMeshElements(const TArray<const FSceneView*>& Views, const FSceneViewFamily& ViewFamily, uint32 VisibilityMap, FMeshElementCollector& Collector) const override
{
QUICK_SCOPE_CYCLE_COUNTER( STAT_LineBatcherSceneProxy_GetDynamicMeshElements );
for (int32 ViewIndex = 0; ViewIndex < Views.Num(); ViewIndex++)
{
if (VisibilityMap & (1 << ViewIndex))
{
const FSceneView* View = Views[ViewIndex];
FPrimitiveDrawInterface* PDI = Collector.GetPDI(ViewIndex);
for (int32 i = 0; i < Lines.Num(); i++)
{
PDI->DrawLine(Lines[i].Start, Lines[i].End, Lines[i].Color, Lines[i].DepthPriority, Lines[i].Thickness);
}
for (int32 i = 0; i < Points.Num(); i++)
{
PDI->DrawPoint(Points[i].Position, Points[i].Color, Points[i].PointSize, Points[i].DepthPriority);
}
for (int32 i = 0; i < Meshes.Num(); i++)
{
static FVector const PosX(1.f,0,0);
static FVector const PosY(0,1.f,0);
static FVector const PosZ(0,0,1.f);
FBatchedMesh const& M = Meshes[i];
// this seems far from optimal in terms of perf, but it's for debugging
FDynamicMeshBuilder MeshBuilder;
// set up geometry
for (int32 VertIdx=0; VertIdx < M.MeshVerts.Num(); ++VertIdx)
{
MeshBuilder.AddVertex( M.MeshVerts[VertIdx], FVector2D::ZeroVector, PosX, PosY, PosZ, FColor::White );
}
//MeshBuilder.AddTriangles(M.MeshIndices);
for (int32 Idx=0; Idx < M.MeshIndices.Num(); Idx+=3)
{
MeshBuilder.AddTriangle( M.MeshIndices[Idx], M.MeshIndices[Idx+1], M.MeshIndices[Idx+2] );
}
FMaterialRenderProxy* const MaterialRenderProxy = new(FMemStack::Get()) FColoredMaterialRenderProxy(GEngine->DebugMeshMaterial->GetRenderProxy(false), M.Color);
MeshBuilder.GetMesh(FMatrix::Identity, MaterialRenderProxy, M.DepthPriority, false, false, ViewIndex, Collector);
}
}
}
}
void FSpriteGeometryEditingHelper::DrawGeometry(const FSceneView& View, FPrimitiveDrawInterface& PDI, const FLinearColor& GeometryVertexColor, const FLinearColor& NegativeGeometryVertexColor)
{
if (GeometryBeingEdited == nullptr)
{
return;
}
FSpriteGeometryCollection& Geometry = GetGeometryChecked();
const bool bIsHitTesting = PDI.IsHitTesting();
const float UnitsPerPixel = EditorContext->SelectedItemGetUnitsPerPixel();
// Run thru the geometry shapes and draw hit proxies for them
for (int32 ShapeIndex = 0; ShapeIndex < Geometry.Shapes.Num(); ++ShapeIndex)
{
const FSpriteGeometryShape& Shape = Geometry.Shapes[ShapeIndex];
const bool bIsShapeSelected = IsGeometrySelected(FShapeVertexPair(ShapeIndex, INDEX_NONE));
const FLinearColor LineColorRaw = Shape.bNegativeWinding ? NegativeGeometryVertexColor : GeometryVertexColor;
const FLinearColor VertexColor = Shape.bNegativeWinding ? NegativeGeometryVertexColor : GeometryVertexColor;
const FLinearColor LineColor = Shape.IsShapeValid() ? LineColorRaw : FMath::Lerp(LineColorRaw, FLinearColor::Red, 0.8f);
// Draw the interior (allowing selection of the whole shape)
if (bIsHitTesting)
{
TSharedPtr<FSpriteSelectedShape> Data = MakeShareable(new FSpriteSelectedShape(EditorContext, Geometry, ShapeIndex, /*bIsBackground=*/ true));
PDI.SetHitProxy(new HSpriteSelectableObjectHitProxy(Data));
}
FColor BackgroundColor(bIsShapeSelected ? SpriteEditingConstantsEX::GeometrySelectedColor : LineColor);
BackgroundColor.A = 4;
FMaterialRenderProxy* ShapeMaterialProxy = WidgetVertexColorMaterial->GetRenderProxy(bIsShapeSelected);
if (Shape.ShapeType == ESpriteShapeType::Circle)
{
//@TODO: This is going to have issues if we ever support ellipses
const FVector2D PixelSpaceRadius = Shape.BoxSize * 0.5f;
const float WorldSpaceRadius = PixelSpaceRadius.X * UnitsPerPixel;
const FVector CircleCenterWorldPos = EditorContext->TextureSpaceToWorldSpace(Shape.BoxPosition);
DrawDisc(&PDI, CircleCenterWorldPos, PaperAxisX, PaperAxisY, BackgroundColor, WorldSpaceRadius, SpriteEditingConstantsEX::CircleShapeNumSides, ShapeMaterialProxy, SDPG_Foreground);
}
else
{
TArray<FVector2D> SourceTextureSpaceVertices;
Shape.GetTextureSpaceVertices(/*out*/ SourceTextureSpaceVertices);
TArray<FVector2D> TriangulatedPolygonVertices;
PaperGeomTools::TriangulatePoly(/*out*/ TriangulatedPolygonVertices, SourceTextureSpaceVertices, /*bKeepColinearVertices=*/ true);
if (((TriangulatedPolygonVertices.Num() % 3) == 0) && (TriangulatedPolygonVertices.Num() > 0))
{
FDynamicMeshBuilder MeshBuilder;
FDynamicMeshVertex MeshVertex;
MeshVertex.Color = BackgroundColor;
MeshVertex.TextureCoordinate = FVector2D::ZeroVector;
MeshVertex.SetTangents(PaperAxisX, PaperAxisY, PaperAxisZ);
for (const FVector2D& SrcTriangleVertex : TriangulatedPolygonVertices)
{
MeshVertex.Position = EditorContext->TextureSpaceToWorldSpace(SrcTriangleVertex);
MeshBuilder.AddVertex(MeshVertex);
}
for (int32 TriangleIndex = 0; TriangleIndex < TriangulatedPolygonVertices.Num(); TriangleIndex += 3)
{
MeshBuilder.AddTriangle(TriangleIndex, TriangleIndex + 1, TriangleIndex + 2);
}
MeshBuilder.Draw(&PDI, FMatrix::Identity, ShapeMaterialProxy, SDPG_Foreground);
}
}
if (bIsHitTesting)
{
PDI.SetHitProxy(nullptr);
}
}
}
void FKSphylElem::DrawElemSolid(FPrimitiveDrawInterface* PDI, const FTransform& ElemTM, float Scale, const FMaterialRenderProxy* MaterialRenderProxy)
{
const int32 NumSides = DrawCollisionSides;
const int32 NumRings = (DrawCollisionSides/2) + 1;
// The first/last arc are on top of each other.
const int32 NumVerts = (NumSides+1) * (NumRings+1);
FDynamicMeshVertex* Verts = (FDynamicMeshVertex*)FMemory::Malloc( NumVerts * sizeof(FDynamicMeshVertex) );
// Calculate verts for one arc
FDynamicMeshVertex* ArcVerts = (FDynamicMeshVertex*)FMemory::Malloc( (NumRings+1) * sizeof(FDynamicMeshVertex) );
for(int32 RingIdx=0; RingIdx<NumRings+1; RingIdx++)
{
FDynamicMeshVertex* ArcVert = &ArcVerts[RingIdx];
float Angle;
float ZOffset;
if( RingIdx <= DrawCollisionSides/4 )
{
Angle = ((float)RingIdx/(NumRings-1)) * PI;
ZOffset = 0.5 * Scale * Length;
}
else
{
Angle = ((float)(RingIdx-1)/(NumRings-1)) * PI;
ZOffset = -0.5 * Scale * Length;
}
// Note- unit sphere, so position always has mag of one. We can just use it for normal!
FVector SpherePos;
SpherePos.X = 0.0f;
SpherePos.Y = Scale * Radius * FMath::Sin(Angle);
SpherePos.Z = Scale * Radius * FMath::Cos(Angle);
ArcVert->Position = SpherePos + FVector(0,0,ZOffset);
ArcVert->SetTangents(
FVector(1,0,0),
FVector(0.0f, -SpherePos.Z, SpherePos.Y),
SpherePos
);
ArcVert->TextureCoordinate.X = 0.0f;
ArcVert->TextureCoordinate.Y = ((float)RingIdx/NumRings);
}
// Then rotate this arc NumSides+1 times.
for(int32 SideIdx=0; SideIdx<NumSides+1; SideIdx++)
{
const FRotator ArcRotator(0, 360.f * ((float)SideIdx/NumSides), 0);
const FRotationMatrix ArcRot( ArcRotator );
const float XTexCoord = ((float)SideIdx/NumSides);
for(int32 VertIdx=0; VertIdx<NumRings+1; VertIdx++)
{
int32 VIx = (NumRings+1)*SideIdx + VertIdx;
Verts[VIx].Position = ArcRot.TransformPosition( ArcVerts[VertIdx].Position );
Verts[VIx].SetTangents(
ArcRot.TransformVector( ArcVerts[VertIdx].TangentX ),
ArcRot.TransformVector( ArcVerts[VertIdx].GetTangentY() ),
ArcRot.TransformVector( ArcVerts[VertIdx].TangentZ )
);
Verts[VIx].TextureCoordinate.X = XTexCoord;
Verts[VIx].TextureCoordinate.Y = ArcVerts[VertIdx].TextureCoordinate.Y;
}
}
FDynamicMeshBuilder MeshBuilder;
{
// Add all of the vertices to the mesh.
for(int32 VertIdx=0; VertIdx<NumVerts; VertIdx++)
{
MeshBuilder.AddVertex(Verts[VertIdx]);
}
// Add all of the triangles to the mesh.
for(int32 SideIdx=0; SideIdx<NumSides; SideIdx++)
{
const int32 a0start = (SideIdx+0) * (NumRings+1);
const int32 a1start = (SideIdx+1) * (NumRings+1);
for(int32 RingIdx=0; RingIdx<NumRings; RingIdx++)
{
MeshBuilder.AddTriangle(a0start + RingIdx + 0, a1start + RingIdx + 0, a0start + RingIdx + 1);
MeshBuilder.AddTriangle(a1start + RingIdx + 0, a1start + RingIdx + 1, a0start + RingIdx + 1);
}
}
}
MeshBuilder.Draw(PDI, ElemTM.ToMatrixWithScale(), MaterialRenderProxy, SDPG_World,0.f);
FMemory::Free(Verts);
FMemory::Free(ArcVerts);
}
void FEdModeGeometry::RenderPoly( const FSceneView* View, FViewport* Viewport, FPrimitiveDrawInterface* PDI )
{
for( int32 ObjectIdx = 0 ; ObjectIdx < GeomObjects.Num() ; ++ObjectIdx )
{
const FGeomObject* GeomObject = GeomObjects[ObjectIdx];
FLinearColor UnselectedColor = GeomObject->GetActualBrush()->GetWireColor();
UnselectedColor.A = .1f;
FLinearColor SelectedColor = GetDefault<UEditorStyleSettings>()->SelectionColor;
SelectedColor.A = .5f;
// Allocate the material proxy and register it so it can be deleted properly once the rendering is done with it.
FDynamicColoredMaterialRenderProxy* SelectedColorInstance = new FDynamicColoredMaterialRenderProxy(GEngine->GeomMaterial->GetRenderProxy(false),SelectedColor );
PDI->RegisterDynamicResource( SelectedColorInstance );
FDynamicColoredMaterialRenderProxy* UnselectedColorInstance = new FDynamicColoredMaterialRenderProxy(GEngine->GeomMaterial->GetRenderProxy(false),UnselectedColor);
PDI->RegisterDynamicResource( UnselectedColorInstance );
// Render selected filled polygons.
for( int32 PolyIdx = 0 ; PolyIdx < GeomObject->PolyPool.Num() ; ++PolyIdx )
{
const FGeomPoly* GeomPoly = &GeomObject->PolyPool[PolyIdx];
PDI->SetHitProxy( new HGeomPolyProxy(const_cast<FGeomObject*>(GeomPoly->GetParentObject()),PolyIdx) );
{
FDynamicMeshBuilder MeshBuilder;
TArray<FVector> Verts;
// Look at the edge list and create a list of vertices to render from.
FVector LastPos(0);
for( int32 EdgeIdx = 0 ; EdgeIdx < GeomPoly->EdgeIndices.Num() ; ++EdgeIdx )
{
const FGeomEdge* GeomEdge = &GeomPoly->GetParentObject()->EdgePool[ GeomPoly->EdgeIndices[EdgeIdx] ];
if( EdgeIdx == 0 )
{
Verts.Add( GeomPoly->GetParentObject()->VertexPool[ GeomEdge->VertexIndices[0] ] );
LastPos = GeomPoly->GetParentObject()->VertexPool[ GeomEdge->VertexIndices[0] ];
}
else if( GeomPoly->GetParentObject()->VertexPool[ GeomEdge->VertexIndices[0] ].Equals( LastPos ) )
{
Verts.Add( GeomPoly->GetParentObject()->VertexPool[ GeomEdge->VertexIndices[1] ] );
LastPos = GeomPoly->GetParentObject()->VertexPool[ GeomEdge->VertexIndices[1] ];
}
else
{
Verts.Add( GeomPoly->GetParentObject()->VertexPool[ GeomEdge->VertexIndices[0] ] );
LastPos = GeomPoly->GetParentObject()->VertexPool[ GeomEdge->VertexIndices[0] ];
}
}
// Draw Polygon Triangles
const int32 VertexOffset = MeshBuilder.AddVertex(Verts[0], FVector2D::ZeroVector, FVector(1,0,0), FVector(0,1,0), FVector(0,0,1), FColor(255,255,255));
MeshBuilder.AddVertex(Verts[1], FVector2D::ZeroVector, FVector(1,0,0), FVector(0,1,0), FVector(0,0,1), FColor(255,255,255));
for( int32 VertIdx = 2 ; VertIdx < Verts.Num() ; ++VertIdx )
{
MeshBuilder.AddVertex(Verts[VertIdx], FVector2D::ZeroVector, FVector(1,0,0), FVector(0,1,0), FVector(0,0,1), FColor(255,255,255));
MeshBuilder.AddTriangle( VertexOffset + VertIdx - 1, VertexOffset, VertexOffset + VertIdx);
}
if( GeomPoly->IsSelected() )
{
MeshBuilder.Draw(PDI, GeomObject->GetActualBrush()->ActorToWorld().ToMatrixWithScale(), SelectedColorInstance, SDPG_World, false );
}
else
{
// We only draw unselected polygons in the perspective viewport
if( !Viewport->GetClient()->IsOrtho() )
{
// Unselected polygons are drawn at the world level but are bumped slightly forward to avoid z-fighting
MeshBuilder.Draw(PDI, GeomObject->GetActualBrush()->ActorToWorld().ToMatrixWithScale(), UnselectedColorInstance, SDPG_World, false );
}
}
}
PDI->SetHitProxy( NULL );
}
}
}