/* Test insert/update/select (but not setting/getting any lock info) on a table that supports locking. */
void BasicUpdateTests::update_on_lock_enabled_table ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcov());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaSample(), ArcSDETestConfig::ClassNameSample(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameSample());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoStringValue> expression = FdoStringValue::Create (L"Zozo");
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (AdjustRdbmsName(L"LockProperty"), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
FdoInt32 newId = 0;
if (reader->ReadNext())
newId = reader->GetInt32(AdjustRdbmsName(L"Id"));
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameSample());
wchar_t filter[1024];
FdoCommonOSUtil::swprintf(filter, ELEMENTS(filter), L"%ls = %d", AdjustRdbmsName(L"Id"), newId);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
value = FdoPropertyValue::Create ();
value->SetName (AdjustRdbmsName(L"LockProperty"));
value->SetValue (L"'All mimsy were the borogoves'");
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameSample());
reader = select->Execute ();
while (reader->ReadNext ())
{
CPPUNIT_ASSERT_MESSAGE ("incorrect value", 0 == wcscmp (L"All mimsy were the borogoves", reader->GetString (AdjustRdbmsName(L"LockProperty"))));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassSimple(), ArcSDETestConfig::ClassNameSample(), true);
mConnection->Close();
}
catch (FdoException* ge)
{
fail (ge);
}
}
int MgdUpdateFeaturesCommand::ExecuteUpdate(MgResourceIdentifier* resource, CREFSTRING className, MgPropertyCollection* propertyValues, CREFSTRING filter, MgTransaction* trans)
{
int updated = 0;
MG_FEATURE_SERVICE_TRY()
CHECK_FEATURE_SOURCE_ARGUMENT(resource, L"MgdUpdateFeaturesCommand::ExecuteUpdate");
CHECKARGUMENTNULL(propertyValues, L"MgdUpdateFeaturesCommand::ExecuteUpdate");
if (className.empty())
throw new MgNullArgumentException(L"MgdUpdateFeaturesCommand::ExecuteUpdate", __LINE__, __WFILE__, NULL, L"", NULL);
Ptr<MgdFeatureConnection> connWrap;
FdoPtr<FdoIConnection> conn;
FdoPtr<FdoITransaction> fdoTrans;
Ptr<MgdTransaction> mgTrans = dynamic_cast<MgdTransaction*>(trans);
if (NULL != mgTrans)
{
SAFE_ADDREF(mgTrans.p);
Ptr<MgResourceIdentifier> origFeatureSource = mgTrans->GetFeatureSource();
//Check that the transaction originates from the same feature source
if (origFeatureSource->ToString() != resource->ToString())
throw new MgInvalidArgumentException(L"MgdUpdateFeaturesCommand::ExecuteUpdate", __LINE__, __WFILE__, NULL, L"", NULL);
connWrap = mgTrans->GetConnection(); //Connection is already open
fdoTrans = mgTrans->GetFdoTransaction();
}
else
{
connWrap = new MgdFeatureConnection(resource);
}
conn = connWrap->GetConnection();
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)conn->CreateCommand(FdoCommandType_Update);
update->SetFeatureClassName(className.c_str());
if (!filter.empty())
update->SetFilter(filter.c_str());
if (NULL != fdoTrans.p)
update->SetTransaction(fdoTrans);
FdoPtr<FdoPropertyValueCollection> propVals = update->GetPropertyValues();
for (INT32 i = 0; i < propertyValues->GetCount(); i++)
{
Ptr<MgProperty> mgp = propertyValues->GetItem(i);
FdoPtr<FdoPropertyValue> pv = MgdFeatureUtil::MgPropertyToFdoProperty(mgp);
propVals->Add(pv);
}
updated = update->Execute();
MG_FEATURE_SERVICE_CATCH_AND_THROW_WITH_FEATURE_SOURCE(L"MgdUpdateFeaturesCommand::ExecuteUpdate", resource)
return updated;
}
int MgdUpdateFeaturesCommand::ExecuteDelete(MgResourceIdentifier* resource, CREFSTRING className, CREFSTRING filter, MgTransaction* trans)
{
int deleted = 0;
MG_FEATURE_SERVICE_TRY()
CHECK_FEATURE_SOURCE_ARGUMENT(resource, L"MgdUpdateFeaturesCommand::ExecuteDelete");
if (className.empty())
throw new MgNullArgumentException(L"MgdUpdateFeaturesCommand::ExecuteDelete", __LINE__, __WFILE__, NULL, L"", NULL);
Ptr<MgdFeatureConnection> connWrap;
FdoPtr<FdoIConnection> conn;
FdoPtr<FdoITransaction> fdoTrans;
Ptr<MgdTransaction> mgTrans = dynamic_cast<MgdTransaction*>(trans);
if (NULL != mgTrans)
{
SAFE_ADDREF(mgTrans.p);
Ptr<MgResourceIdentifier> origFeatureSource = mgTrans->GetFeatureSource();
//Check that the transaction originates from the same feature source
if (origFeatureSource->ToString() != resource->ToString())
throw new MgInvalidArgumentException(L"MgdUpdateFeaturesCommand::ExecuteDelete", __LINE__, __WFILE__, NULL, L"", NULL);
connWrap = mgTrans->GetConnection(); //Connection is already open
fdoTrans = mgTrans->GetFdoTransaction();
}
else
{
connWrap = new MgdFeatureConnection(resource);
}
conn = connWrap->GetConnection();
FdoPtr<FdoIDelete> fdoDelete = (FdoIDelete*)conn->CreateCommand(FdoCommandType_Delete);
fdoDelete->SetFeatureClassName(className.c_str());
if (!filter.empty())
fdoDelete->SetFilter(filter.c_str());
if (NULL != fdoTrans.p)
fdoDelete->SetTransaction(fdoTrans);
deleted = fdoDelete->Execute();
MG_FEATURE_SERVICE_CATCH_AND_THROW_WITH_FEATURE_SOURCE(L"MgdUpdateFeaturesCommand::ExecuteDelete", resource)
return deleted;
}
/// <summary>Executes the select command and returns a reference to an FdoIDataReader.</summary>
/// <returns>Returns the feature reader.</returns>
FdoIDataReader* FdoCommonSelectAggregatesCommand::Execute ()
{
FdoString* class_name;
class_name = FdoPtr<FdoIdentifier> (GetFeatureClassName ())->GetName ();
FdoPtr<FdoIConnection> conn = (FdoIConnection*)GetConnection ();
//we will need a vanilla select command to get the features
//the user would like to work with (given class and FdoFilter)
FdoPtr <FdoISelect> selectCmd = (FdoISelect*)conn->CreateCommand(FdoCommandType_Select);
selectCmd->SetFeatureClassName(class_name);
selectCmd->SetFilter(mFilter);
// Get other relevant info:
FdoPtr<FdoIdentifierCollection> selectedIds = GetPropertyNames();
FdoPtr<FdoClassDefinition> originalClassDef = FdoCommonSchemaUtil::GetLogicalClassDefinition(conn, class_name, NULL);
// Create and return the data reader:
FdoPtr<FdoIDataReader> dataReader = new FdoCommonDataReader(conn, selectCmd, originalClassDef, selectedIds, m_bDistinct, m_OrderingIds, m_eOrderingOption);
return FDO_SAFE_ADDREF(dataReader.p);
}
void SuperMapSelectTest::select_sdb_date()
{
CPPUNIT_ASSERT_MESSAGE("FDO连接未打开!", m_connection != NULL);
CPPUNIT_ASSERT_MESSAGE("FDO连接引用次数不为1!", m_connection->GetRefCount() == 1);
FdoPtr<FdoISelect> Select;
Select = (FdoISelect *)m_connection->CreateCommand(FdoCommandType_Select);
if(Select)
{
Select->SetFeatureClassName(L"面");
FdoString *strFilter = L"TestDate <= TIMESTAMP '2007-12-12 00:00:00'";
Select->SetFilter( strFilter );
FdoPtr<FdoIFeatureReader> ret;
try
{
ret = Select->Execute();
}
catch (FdoException* ex)
{
FdoException* nex = ex;
while (nex)
{
AfxMessageBox(ex->GetExceptionMessage());
nex = nex->GetCause();
}
ex->Release();
}
catch(...)
{
CPPUNIT_FAIL("unresolved exception");
}
CPPUNIT_ASSERT_MESSAGE("返回的要素集合为空!", ret != NULL);
int count = 0;
int SmID;
int UserID;
FdoDateTime Date;
FdoPtr<FdoByteArray> geometry;
try
{
while (ret->ReadNext ())
{
count++;
if(!ret->IsNull(L"SmID"))
{
SmID = ret->GetInt32 (L"SmID");
}
if(!ret->IsNull(L"SmUserID"))
{
UserID = ret->GetInt32 (L"SmUserID");
}
if(!ret->IsNull(L"TestDate"))
{
Date = ret->GetDateTime (L"TestDate");
}
if(!ret->IsNull(L"Geometry"))
{
geometry = ret->GetGeometry (L"Geometry");
}
CPPUNIT_ASSERT_MESSAGE ("几何对象类型不正确", FdoGeometryType_Polygon == *(int*)geometry->GetData());
}
CPPUNIT_ASSERT_MESSAGE ("未查出面数据集中的要素", 0 != count);
}
catch (FdoException* ex)
{
FdoException* nex = ex;
while (nex)
{
AfxMessageBox(ex->GetExceptionMessage());
nex = nex->GetCause();
}
ex->Release();
}
}
}
/* Test basic update operation. */
void BasicUpdateTests::simple_update ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcov());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassSimple(), ArcSDETestConfig::ClassNameTestClassSimple(), true);
// insert a feature
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassSimple());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)FdoExpression::Parse (Data[0]->mPropertyData[0]);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5108.8 5104.7, 5109 5104, 5109 5105, 5108.8 5104.7))')");
value = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
int id;
while (reader->ReadNext ())
id = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
// update it
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassSimple());
FdoPtr<FdoPropertyValueCollection> propertyValues = update->GetPropertyValues();
wchar_t filter[1024];
FdoCommonOSUtil::swprintf(filter, ELEMENTS(filter), L"%ls = %d", (FdoString*)GetIdPropName(), id);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
value = FdoPropertyValue::Create ();
value->SetName (Data[0]->mPropertyName);
//FdoPtr<FdoStringValue> _string = static_cast<FdoStringValue*>(value->GetValue ());
//_string->SetNull ();
value->SetValue (L"'All mimsy were the borogoves'");
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassSimple());
reader = select->Execute ();
while (reader->ReadNext ())
{
CPPUNIT_ASSERT_MESSAGE ("incorrect value", 0 == wcscmp (L"All mimsy were the borogoves", reader->GetString (Data[0]->mPropertyName)));
// check geometry was not affected
FdoPtr<FdoGeometryValue> geometry = (FdoGeometryValue*)FDO_SAFE_ADDREF(expression.p);
FdoPtr<FdoByteArray> fetched = reader->GetGeometry ((FdoString*)GetGeomPropName());
FdoString* geometryText = geometry->ToString();
FdoPtr<FdoGeometryValue> fetchedGeom = FdoGeometryValue::Create (fetched);
FdoString* fetchedText = fetchedGeom->ToString ();
CPPUNIT_ASSERT_MESSAGE ("incorrect geometry value", 0==wcscmp(geometryText, fetchedText));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassSimple(), ArcSDETestConfig::ClassNameTestClassSimple(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test insert/update/select on a table that has a UUID column. */
void BasicUpdateTests::update_uuid ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcov());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassUuid(), ArcSDETestConfig::ClassNameTestClassUuid(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoStringValue> expression = FdoStringValue::Create (L"Added");
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (AdjustRdbmsName(L"MYSTRING"), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
expression->SetString(L"Updated");
reader = insert->Execute ();
expression->SetString(L"Deleted");
reader = insert->Execute ();
FdoStringP addedUuid1;
FdoStringP updatedUuid1;
FdoStringP deletedUuid;
FdoStringP updatedUuid2 = L"{ABCDEFGH-IJKL-MNOP-QRST-UVWXYZ123456}";
FdoStringP addedUuid3;
FdoStringP updatedUuid3;
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
reader = select->Execute ();
while (reader->ReadNext ())
{
FdoStringP myString = reader->GetString(AdjustRdbmsName(L"MYSTRING"));
if ( myString == L"Added" )
addedUuid1 = reader->GetString(AdjustRdbmsName(L"ID"));
else if ( myString == L"Updated" )
updatedUuid1 = reader->GetString(AdjustRdbmsName(L"ID"));
else if ( myString == L"Deleted" )
deletedUuid = reader->GetString(AdjustRdbmsName(L"ID"));
}
reader->Close();
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
FdoStringP filter = FdoStringP::Format( L"%ls = '%ls'", (FdoString*) AdjustRdbmsName(L"ID"), (FdoString*) updatedUuid1 );
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
value = FdoPropertyValue::Create ();
value->SetName (AdjustRdbmsName(L"ID"));
expression = FdoStringValue::Create (updatedUuid2);
value->SetValue (expression);
values->Add (value);
bool updateFailed = false;
// ID is readonly so update should fail.
try
{
update->Execute ();
}
catch ( FdoException* ex )
{
ex->Release();
updateFailed = true;
}
CPPUNIT_ASSERT ("update failed");
FdoPtr<FdoIDelete> dlte = (FdoIDelete*)mConnection->CreateCommand (FdoCommandType_Delete);
dlte->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
filter = FdoStringP::Format( L"%ls = '%ls'", (FdoString*) AdjustRdbmsName(L"ID"), (FdoString*) deletedUuid );
dlte->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
if (1 != dlte->Execute ())
CPPUNIT_FAIL ("delete execute failed");
// check by doing a select
select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
reader = select->Execute ();
int count = 0;
while (reader->ReadNext ())
{
count++;
FdoStringP myString = reader->GetString(AdjustRdbmsName(L"MYSTRING"));
if ( myString == L"Added" )
addedUuid3 = reader->GetString(AdjustRdbmsName(L"ID"));
else if ( myString == L"Updated" )
updatedUuid3 = reader->GetString(AdjustRdbmsName(L"ID"));
}
reader->Close();
CPPUNIT_ASSERT( count == 2 );
CPPUNIT_ASSERT( addedUuid3 == addedUuid1 );
CPPUNIT_ASSERT( updatedUuid3 == updatedUuid1 );
CPPUNIT_ASSERT( updatedUuid3 != updatedUuid2 );
mConnection->Close();
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test spatial filter. */
void BasicUpdateTests::spatial_filter ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcovSingleDb());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)FdoExpression::Parse (Data[0]->mPropertyData[0]);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5010.282 5011.717, 5010.4 5011.7, 5010.4 5011.3, 5010.282 5011.717))')");
value = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
int id1;
while (reader->ReadNext ())
id1 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'John Smith'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5000.919 5000.277, 5000.5 5000.2, 5000.5 5000.7, 5000.919 5000.277))')");
value->SetValue (expression);
reader = insert->Execute ();
int id2;
while (reader->ReadNext ())
id2 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'Mott the Hoople'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5014.262 5015.018, 5014.3 5015.9, 5014.9 5015.9, 5014.262 5015.018))')");
value->SetValue (expression);
reader = insert->Execute ();
int id3;
while (reader->ReadNext ())
id3 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
// do a spatial filtered update
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (L"SHAPE INTERSECTS GEOMFROMTEXT ('POLYGON XY (( 5012 5012, 5020 5012, 5020 5016, 5012 5016, 5012 5012 ))')")));
values = update->GetPropertyValues ();
expression = (FdoValueExpression*)FdoExpression::Parse (L"'Alice in Wonderland'");
value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = select->Execute ();
int id;
while (reader->ReadNext ())
{
id = reader->GetInt32 ((FdoString*)GetIdPropName());
FdoString* item = reader->GetString (Data[0]->mPropertyName);
if (id == id3)
CPPUNIT_ASSERT_MESSAGE ("value not changed", 0 == wcscmp (item, L"Alice in Wonderland"));
else
CPPUNIT_ASSERT_MESSAGE ("value mistakenly changed", 0 != wcscmp (item, L"Alice in Wonderland"));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test geometry update operation. */
void BasicUpdateTests::geometry_update ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcovSingleDb());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)FdoExpression::Parse (Data[0]->mPropertyData[0]);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5010.282 5011.717, 5011 5012, 5013 5012, 5010.282 5011.717))')");
FdoPtr<FdoPropertyValue> geometry = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (geometry);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
int id;
while (reader->ReadNext ())
id = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'John Smith'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5000.919 5000.277, 5005 5000, 5005 5005, 5000.919 5000.277))')");
value->SetValue (expression);
reader = insert->Execute ();
int id2;
while (reader->ReadNext ())
id2 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'Mott the Hoople'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5014.262 5000.018, 5015 5005, 5016 5010, 5014.262 5000.018))')");
value->SetValue (expression);
reader = insert->Execute ();
int id3;
while (reader->ReadNext ())
id3 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
// update it
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
FdoPtr<FdoPropertyValueCollection> propertyValues = update->GetPropertyValues();
wchar_t filter[1024];
FdoCommonOSUtil::swprintf(filter, ELEMENTS(filter), L"%ls = %d", (FdoString*)GetIdPropName(), id);
FdoPtr<FdoFilter> fdoFilter = FdoFilter::Parse (filter);
update->SetFilter (fdoFilter);
values = update->GetPropertyValues ();
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5008.8 5004.7, 5010 5010, 5000 5005, 5008.8 5004.7))')");
value = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
fdoFilter = FdoFilter::Parse (filter);
select->SetFilter (fdoFilter);
reader = select->Execute ();
while (reader->ReadNext ())
{
FdoPtr<FdoGeometryValue> geometry = FDO_SAFE_ADDREF((FdoGeometryValue*)expression.p);
FdoPtr<FdoByteArray> fetched = reader->GetGeometry ((FdoString*)GetGeomPropName());
FdoString* referenceText = geometry->ToString();
FdoPtr<FdoGeometryValue> fetchedGeom = FdoGeometryValue::Create (fetched);
const wchar_t* fetchedText = fetchedGeom->ToString ();
CPPUNIT_ASSERT_MESSAGE ("incorrect geometry value", 0==wcscmp(referenceText, fetchedText));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test all data types update operation. */
void BasicUpdateTests::full_update ()
{
int iRow = 0;
FdoPtr<FdoPropertyValueCollection> values;
FdoPtr<FdoISelect> selectCmd;
FdoPtr<FdoIFeatureReader> reader;
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcovSingleDb());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
// Insert 2 rows of data:
while (iRow<=1)
{
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
values = insert->GetPropertyValues ();
for (int i = 0; i < PropertyCount; i++)
{
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create ();
value->SetName (Data[i]->mPropertyName);
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)ArcSDETests::ParseByDataType (Data[i]->mPropertyData[iRow], Data[i]->mPropertyType);
value->SetValue (expression);
values->Add (value);
}
reader = insert->Execute ();
// none returned: reader->Close ();
iRow++;
}
// check by doing a select
selectCmd = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
selectCmd->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = selectCmd->Execute ();
FdoInt32 iSelectedRow = 0;
while (reader->ReadNext ())
{
// NOTE: we're assuming we receive the rows in the same order we inserted them
for (int i = 0; i < PropertyCount; i++)
checkEqual(reader, Data[i]->mPropertyName, Data[i]->mPropertyType, Data[i]->mPropertyData[iSelectedRow]);
iSelectedRow++;
}
reader->Close ();
// Update both rows, providing several values in the *reverse* order as class properties appear:
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
wchar_t filter[1024];
wcscpy (filter, Data[3]->mPropertyName);
wcscat (filter, L" = ");
wcscat (filter, Data[3]->mPropertyData[0]);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
for (int iPropertyIndex = 0; iPropertyIndex < PropertyCount; iPropertyIndex++)
{
int iDataIndex = (PropertyCount - 1) - iPropertyIndex;
FdoPtr<FdoValueExpression> expression;
expression = (FdoValueExpression*)ArcSDETests::ParseByDataType (Data[iDataIndex]->mPropertyData[iRow], Data[iDataIndex]->mPropertyType);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[iDataIndex]->mPropertyName, expression);
values->Add (value);
}
FdoInt32 iUpdatedRows = update->Execute ();
//NOTE: iUpdatedRows is currently always 1, regardless of the # of rows actually affected.
// check by doing a select
selectCmd = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
selectCmd->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = selectCmd->Execute ();
while (reader->ReadNext ())
for (int i = 0; i < PropertyCount; i++)
checkEqual(reader, Data[i]->mPropertyName, Data[i]->mPropertyType, Data[i]->mPropertyData[iRow]);
reader->Close ();
iRow++;
// Update both rows, providing *mostly NULL value* in the *same* order as class properties appear:
update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
wcscpy (filter, Data[3]->mPropertyName);
wcscat (filter, L" = ");
wcscat (filter, Data[3]->mPropertyData[iRow-1]);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
for (int i = 0; i < PropertyCount; i++)
{
FdoPtr<FdoValueExpression> expression;
expression = (FdoValueExpression*)ArcSDETests::ParseByDataType (Data[i]->mPropertyData[iRow], Data[i]->mPropertyType);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[i]->mPropertyName, expression);
value->SetValue (expression);
values->Add (value);
}
iUpdatedRows = update->Execute ();
//NOTE: iUpdatedRows is currently always 1, regardless of the # of rows actually affected.
// check by doing a select
selectCmd = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
selectCmd->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = selectCmd->Execute ();
while (reader->ReadNext ())
for (int i = 0; i < PropertyCount; i++)
checkEqual(reader, Data[i]->mPropertyName, Data[i]->mPropertyType, Data[i]->mPropertyData[iRow]);
reader->Close ();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}