// sets the entity m from which the mesh will be copied
void GEntity::setMeshMaster(int m_signed)
{
if(m_signed == tag()){ _meshMaster = m_signed; return; }
GEntity *gMaster = 0;
int m = abs(m_signed);
switch(dim()){
case 0 : gMaster = model()->getVertexByTag(m); break;
case 1 : gMaster = model()->getEdgeByTag(m); break;
case 2 : gMaster = model()->getFaceByTag(m); break;
case 3 : gMaster = model()->getRegionByTag(m); break;
}
if (!gMaster){
Msg::Error("Model entity %d of dimension %d cannot be the mesh master of entity %d",
m, dim(), tag());
return;
}
int masterOfMaster = gMaster->meshMaster();
if (masterOfMaster == gMaster->tag()){
_meshMaster = m_signed;
}
else {
setMeshMaster ( masterOfMaster * ((m_signed > 0) ? 1 : -1));
}
}
int main(int argc, char **argv)
{
GmshInitialize(argc, argv);
GmshSetOption("Mesh", "Algorithm", 5.);
GmshSetOption("General", "Terminal", 1.);
GModel *m = new GModel();
m->readMSH("bunny.msh");
m->fillVertexArrays();
std::vector<GEntity*> entities;
m->getEntities(entities);
for(unsigned int i = 0; i < entities.size(); i++){
GEntity *ge = entities[i];
printf("coucou entite %d (dimension %d)\n", ge->tag(), ge->dim());
if(ge->va_triangles)
printf(" j'ai un va de triangles: %d vertex\n", ge->va_triangles->getNumVertices());
if(ge->va_lines)
printf(" j'ai un va de lignes: %d vertex\n", ge->va_lines->getNumVertices());
}
delete m;
GmshFinalize();
}
// gets the entity from which the mesh will be copied
int GEntity::meshMaster() const
{
if (_meshMaster == tag()) return tag();
GEntity *gMaster = 0;
switch(dim()){
case 0 : gMaster = model()->getVertexByTag(abs(_meshMaster)); break;
case 1 : gMaster = model()->getEdgeByTag(abs(_meshMaster)); break;
case 2 : gMaster = model()->getFaceByTag(abs(_meshMaster)); break;
case 3 : gMaster = model()->getRegionByTag(abs(_meshMaster)); break;
}
if (!gMaster){
Msg::Error("Could not find mesh master entity %d",_meshMaster);
return tag();
}
int masterOfMaster = gMaster->meshMaster();
if (masterOfMaster == gMaster->tag()){
return _meshMaster ;
}
else {
return gMaster->meshMaster() * ((_meshMaster > 0) ? 1 : -1);
}
}
void updateBoVec<2, MEdge>(
const int normalSource, const MVertex *const vertex, const int zoneIndex,
const int vertIndex,
const CCon::FaceVector<MZoneBoundary<2>::GlobalVertexData<MEdge>::FaceDataB>
&faces,
ZoneBoVec &zoneBoVec, BCPatchIndex &patch, bool &warnNormFromElem)
{
GEntity *ent;
if(normalSource == NormalSourceElement) goto getNormalFromElements;
ent = vertex->onWhat();
if(ent == 0) {
goto getNormalFromElements;
// No entity: try to find a normal from the faces
}
else {
switch(ent->dim()) {
case 0:
/*--------------------------------------------------------------------*
* In this case, there are possibly two GEdges from this zone
* connected to the vertex. If the angle between the two edges is
* significant, the BC patch will be split and this vertex will be
* written in both patches with different normals. If the angle is
* small, or only one GEdge belongs to this zone, then the vertex will
* only be written to one patch.
*--------------------------------------------------------------------*/
{
// Find edge entities that are connected to elements in the zone
std::vector<std::pair<GEdge *, int> > useGEdge;
const int nFace = faces.size();
for(int iFace = 0; iFace != nFace; ++iFace) {
if(zoneIndex == faces[iFace].zoneIndex) {
MEdge mEdge =
faces[iFace].parentElement->getEdge(faces[iFace].parentFace);
// Get the other vertex on the mesh edge.
MVertex *vertex2 = mEdge.getMinVertex();
if(vertex2 == vertex) vertex2 = mEdge.getMaxVertex();
// Check if the entity associated with vertex2 is a line and
// is also connected to vertex. If so, add it to the container of
// edge entities that will be used to determine the normal
GEntity *const ent2 = vertex2->onWhat();
if(ent2->dim() == 1) {
useGEdge.push_back(
std::pair<GEdge *, int>(static_cast<GEdge *>(ent2), iFace));
}
}
}
//--'useGEdge' now contains the edge entities that will be used to
// determine
//--the normals
switch(useGEdge.size()) {
case 0:
// goto getNormalFromElements;
// We probably don't want BC data if none of the faces attatched to
// this vertex and in this zone are on the boundary.
break;
case 1: {
const GEdge *const gEdge =
static_cast<const GEdge *>(useGEdge[0].first);
SVector3 boNormal;
if(edge_normal(vertex, zoneIndex, gEdge, faces, boNormal))
goto getNormalFromElements;
zoneBoVec.push_back(VertexBoundary(zoneIndex, gEdge->tag(), boNormal,
const_cast<MVertex *>(vertex),
vertIndex));
patch.add(gEdge->tag());
} break;
case 2: {
// Get the first normal
const GEdge *const gEdge1 =
static_cast<const GEdge *>(useGEdge[0].first);
SVector3 boNormal1;
if(edge_normal(vertex, zoneIndex, gEdge1, faces, boNormal1,
useGEdge[0].second))
goto getNormalFromElements;
// Get the second normal
const GEdge *const gEdge2 =
static_cast<const GEdge *>(useGEdge[1].first);
SVector3 boNormal2;
if(edge_normal(vertex, zoneIndex, gEdge2, faces, boNormal2,
useGEdge[1].second))
goto getNormalFromElements;
if(dot(boNormal1, boNormal2) < 0.98) {
//--Write 2 separate patches
zoneBoVec.push_back(
VertexBoundary(zoneIndex, gEdge1->tag(), boNormal1,
const_cast<MVertex *>(vertex), vertIndex));
patch.add(gEdge1->tag());
zoneBoVec.push_back(
VertexBoundary(zoneIndex, gEdge2->tag(), boNormal2,
const_cast<MVertex *>(vertex), vertIndex));
patch.add(gEdge2->tag());
}
else {
//--Write one patch
boNormal1 += boNormal2;
boNormal1 *= 0.5;
zoneBoVec.push_back(
VertexBoundary(zoneIndex, gEdge1->tag(), boNormal1,
const_cast<MVertex *>(vertex), vertIndex));
patch.addPair(gEdge1->tag(), gEdge2->tag());
}
} break;
default:
Msg::Error("Internal error based on 2-D boundary assumptions (file "
"\'MZoneBoundary.cpp'). Boundary vertices may be "
"incorrect");
break;
}
}
break;
case 1:
/*--------------------------------------------------------------------*
* The vertex exists on an edge and belongs to only 1 BC patch.
*--------------------------------------------------------------------*/
{
SVector3 boNormal;
if(edge_normal(vertex, zoneIndex, static_cast<const GEdge *>(ent),
faces, boNormal))
goto getNormalFromElements;
zoneBoVec.push_back(VertexBoundary(zoneIndex, ent->tag(), boNormal,
const_cast<MVertex *>(vertex),
vertIndex));
patch.add(ent->tag());
}
break;
default: goto getNormalFromElements;
}
}
return;
getNormalFromElements:;
/*--------------------------------------------------------------------*
* Geometry information cannot be used - generate normals from the
* elements
*--------------------------------------------------------------------*/
{
if(warnNormFromElem && normalSource == 1) {
Msg::Warning("Some or all boundary normals were determined from mesh "
"elements instead of from the geometry");
warnNormFromElem = false;
}
// The mesh plane normal is computed from all elements attached to the
// vertex
SVector3 meshPlaneNormal(0.); // This normal is perpendicular to the
// plane of the mesh
const int nFace = faces.size();
for(int iFace = 0; iFace != nFace; ++iFace) {
if(faces[iFace].zoneIndex == zoneIndex) {
// Make sure all the planes go in the same direction
//**Required?
SVector3 mpnt = faces[iFace].parentElement->getFace(0).normal();
if(dot(mpnt, meshPlaneNormal) < 0.) mpnt.negate();
meshPlaneNormal += mpnt;
}
}
// Sum the normals from each element. The tangent is computed from all
// faces in the zone attached to the vertex and is weighted by the length of
// the edge. Each tangent has to be converted independently into an
// inwards-pointing normal.
SVector3 boNormal(0.);
for(int iFace = 0; iFace != nFace; ++iFace) {
if(faces[iFace].zoneIndex == zoneIndex) {
const SVector3 tangent =
faces[iFace]
.parentElement->getEdge(faces[iFace].parentFace)
.tangent();
// Normal to the boundary (unknown direction)
SVector3 bnt = crossprod(tangent, meshPlaneNormal);
// Inwards normal
const SVector3 inwards(vertex->point(),
faces[iFace].parentElement->barycenter());
if(dot(bnt, inwards) < 0.) bnt.negate();
boNormal += bnt;
}
}
boNormal.normalize();
zoneBoVec.push_back(VertexBoundary(
zoneIndex, 0, boNormal, const_cast<MVertex *>(vertex), vertIndex));
patch.add(0);
}
}
// Main function for fast curving
void HighOrderMeshFastCurving(GModel *gm, FastCurvingParameters &p)
{
double t1 = Cpu();
Msg::StatusBar(true, "Optimizing high order mesh...");
std::vector<GEntity*> allEntities;
gm->getEntities(allEntities);
// Compute vert. -> elt. connectivity
Msg::Info("Computing connectivity...");
std::map<MVertex*, std::vector<MElement *> > vertex2elements;
for (int iEnt = 0; iEnt < allEntities.size(); ++iEnt)
calcVertex2Elements(p.dim, allEntities[iEnt], vertex2elements);
// Get BL field (if any)
BoundaryLayerField *blf = getBLField(gm);
// Build multimap of each geometric entity to its boundaries
std::multimap<GEntity*,GEntity*> entities;
if (blf) { // BF field?
for (int iEnt = 0; iEnt < allEntities.size(); ++iEnt) {
GEntity* &entity = allEntities[iEnt];
if (entity->dim() == p.dim && (!p.onlyVisible || entity->getVisibility())) // Consider only "domain" entities
if (p.dim == 2) { // "Domain" face?
std::list<GEdge*> edges = entity->edges();
for (std::list<GEdge*>::iterator itEd = edges.begin(); itEd != edges.end(); itEd++) // Loop over model boundary edges
if (blf->isEdgeBL((*itEd)->tag())) // Already skip model edge if no BL there
entities.insert(std::pair<GEntity*,GEntity*>(entity, *itEd));
}
else if (p.dim == 3) { // "Domain" region?
std::list<GFace*> faces = entity->faces();
for (std::list<GFace*>::iterator itF = faces.begin(); itF != faces.end(); itF++) // Loop over model boundary faces
if (blf->isFaceBL((*itF)->tag())) // Already skip model face if no BL there
entities.insert(std::pair<GEntity*,GEntity*>(entity, *itF));
}
}
}
else { // No BL field
for (int iEnt = 0; iEnt < allEntities.size(); ++iEnt) {
GEntity* &entity = allEntities[iEnt];
if (entity->dim() == p.dim-1 && (!p.onlyVisible || entity->getVisibility())) // Consider boundary entities
entities.insert(std::pair<GEntity*,GEntity*>(0, entity));
}
}
// Build normals if necessary
std::map<GEntity*, std::map<MVertex*, SVector3> > normVertEnt; // Normal to each vertex for each geom. entity
if (!blf) {
Msg::Warning("Boundary layer data not found, trying to detect columns");
buildNormals(vertex2elements, entities, p, normVertEnt);
}
// Loop over geometric entities
for (std::multimap<GEntity*,GEntity*>::iterator itBE = entities.begin();
itBE != entities.end(); itBE++) {
GEntity *domEnt = itBE->first, *bndEnt = itBE->second;
BoundaryLayerColumns *blc = 0;
if (blf) {
Msg::Info("Curving elements for entity %d bounding entity %d...",
bndEnt->tag(), domEnt->tag());
if (p.dim == 2)
blc = domEnt->cast2Face()->getColumns();
else if (p.dim == 3)
blc = domEnt->cast2Region()->getColumns();
else
Msg::Error("Fast curving implemented only in dim. 2 and 3");
}
else
Msg::Info("Curving elements for boundary entity %d...", bndEnt->tag());
std::map<MVertex*, SVector3> &normVert = normVertEnt[bndEnt];
curveMeshFromBnd(vertex2elements, normVert, blc, bndEnt, p);
}
double t2 = Cpu();
Msg::StatusBar(true, "Done curving high order mesh (%g s)", t2-t1);
}
