Esempi in C++ (Cpp) per HAL_CONTINUATION::Abort

Esempio n. 1

File: enc28j60_lwip_driver.cpp Progetto: EddieGarmon/netduino-netmf

BOOL ENC28J60_LWIP_Driver::Close( ENC28J60_LWIP_DRIVER_CONFIG* config, int index )
{
    NATIVE_PROFILE_HAL_DRIVERS_ETHERNET();

    if(config == NULL) return FALSE;

    LwipUpTimeCompletion.Abort();

    netif_set_link_down( &g_ENC28J60_NetIF );
    netif_set_down( &g_ENC28J60_NetIF );
    netif_remove( &g_ENC28J60_NetIF );

    /* Disable the INTERRUPT pin */                            
    CPU_GPIO_EnableInputPin2(config->INT_Pin, 
                              FALSE,                         /* Glitch filter enable */
                              NULL,                          /* ISR                  */
                              0,                             /* minor number         */
                              GPIO_INT_NONE,                 /* Interrupt edge       */
                              RESISTOR_PULLUP);              /* Resistor State       */

    InterruptTaskContinuation.Abort();

    LwipNetworkStatus = FALSE;
    
    enc28j60_lwip_close( &g_ENC28J60_NetIF );

    memset(&g_ENC28J60_NetIF, 0, sizeof(g_ENC28J60_NetIF));

    return TRUE;

}

Esempio n. 2

File: rtpthrd.cpp Progetto: Wampamba-Nooh/NETMF-LPC

/*----------------------------------------------------------------------*
                            rtp_thread_kill
 *----------------------------------------------------------------------*/
int rtp_thread_kill (RTP_HANDLE         * newThread,
                      RTP_ENTRY_POINT_FN   entryPoint,
                      const char         * name,
                      int                  stackSizeIndex,
                      int                  priorityIndex,
                      void               * userData)
{
    int * index = (int *) userData;
    
    if ((rtp_strcmp(name, "ip interpret") == 0) && IPTaskInitialized[*index])
    {
        IPTaskInitialized[*index] = 0;

        IPTaskContinuation[*index].Abort();
    }
    
    else if ((rtp_strcmp(name, "timer comp") == 0) && TimerTaskCompInitialized)
    {
        TimerTaskCompInitialized = 0;
        
        TimerTaskCompletion.Abort();
    }       
    
    else if ((rtp_strcmp(name, "timer cont") == 0) && TimerTaskContInitialized)
    {      
        TimerTaskContInitialized = 0;

        TimerTaskContinuation.Abort();
    } 
    
    else if ((rtp_strcmp(name, "interrupt task") == 0) && InterruptTaskContInitialized[*index])
    {
        InterruptTaskContInitialized[*index] = 0;
        
        InterruptTaskContinuation[*index].Abort();
    }
    
    else if ((rtp_strcmp(name, "dhcp") == 0) && DHCPTaskInitialized)
    {
        DHCPTaskInitialized = 0;
        
        DHCPTaskContinuation.Abort();
    }
    
    return (0);    
}

Esempio n. 3

File: lwIP__Sockets.cpp Progetto: Ayati1987/netmf-interpreter

BOOL LWIP_SOCKETS_Driver::Uninitialize()
{
    NATIVE_PROFILE_PAL_NETWORK();      

    PostAddressChangedContinuation.Abort();
    PostAvailabilityOnContinuation.Abort();
    PostAvailabilityOffContinuation.Abort();

    for(int i=0; i<g_NetworkConfig.NetworkInterfaceCount; i++)
    {
        Network_Interface_Close(i);
    }

    tcpip_shutdown();

    return TRUE;
}

Esempio n. 4

File: AT91_EMAC_lwip_adapter.cpp Progetto: Sorcha/NETMF-LPC

BOOL AT91_EMAC_LWIP_Driver::Close(void)
{
    LwipUpTimeCompletion.Abort();

    CPU_INTC_DeactivateInterrupt(AT91C_ID_EMAC);

    InterruptTaskContinuation.Abort();

    LwipNetworkStatus = 0;

    netif_set_down( &g_AT91_EMAC_NetIF );
    netif_remove( &g_AT91_EMAC_NetIF );

    AT91_EMAC_LWIP_close( &g_AT91_EMAC_NetIF );
    
    memset( &g_AT91_EMAC_NetIF, 0, sizeof g_AT91_EMAC_NetIF );

    return TRUE;
}

Esempio n. 5

File: LPC24XX_EMAC_lwip_driver.cpp Progetto: Sorcha/NETMF-LPC

BOOL LPC24XX_EMAC_LWIP_Driver::Close( )
{
    LwipUpTimeCompletion.Abort();

    /* Disable the interrupt */
    CPU_INTC_DeactivateInterrupt(LPC24XX_VIC::c_IRQ_INDEX_EMAC);

    InterruptTaskContinuation.Abort();

    LwipNetworkStatus = 0;

    netif_set_down( &g_LPC24XX_EMAC_NetIF );
    netif_remove( &g_LPC24XX_EMAC_NetIF );

    LPC24XX_EMAC_lwip_close( &g_LPC24XX_EMAC_NetIF );
    
    memset( &g_LPC24XX_EMAC_NetIF, 0, sizeof g_LPC24XX_EMAC_NetIF);

    return TRUE;
}

Esempio n. 6

File: SH7264_SMSC_lwip_adapter.cpp Progetto: Wampamba-Nooh/NETMF-LPC

BOOL SH7264_SMSC_LWIP_Driver::Close(void)
{
    LwipUpTimeCompletion.Abort();

    //CPU_INTC_DeactivateInterrupt(SH7264C_ID_EDMAC);
    CPU_INTC_DeactivateInterrupt(81);

    InterruptTaskContinuation.Abort();

    LwipNetworkStatus = 0;

    netif_set_down( &g_SH7264_SMSC_NetIF );
    netif_remove( &g_SH7264_SMSC_NetIF );

    SH7264_SMSC_lwip_close( &g_SH7264_SMSC_NetIF );
    
    memset( &g_SH7264_SMSC_NetIF, 0, sizeof g_SH7264_SMSC_NetIF);

    return TRUE;
}

Esempio n. 7

File: STM32F4_ETH_lwip_adapter.cpp Progetto: NicolasG3/NETMF4.3_Community

void DeInitContinuations()
{
    LwipUpTimeCompletion.Abort();
    InterruptTaskContinuation.Abort();
}