Esempio n. 1
0
static void Test_EssenceStreamPullWrite(
	IAAFFile	*pFile,
	CAAFBuiltinDefs & defs)
{
	IAAFTypeDefSP pTypeDef;
	IAAFTypeDefStream3SP pTypeDefStream3;

    // Get the direct access interfaces.
	IAAFObjectSP		pObject;
	IAAFPropertyDefSP	pDataPropertyDef;
	IAAFPropertyDefSP	pSampleIndexPropertyDef;  
	IAAFPropertyValueSP pStreamPropertyValue;
	IAAFStreamAccess		*cb = 0;
	IAAFEssenceDataSP		pEssenceData; 
	IAAFHeaderSP		pHeader;
	IAAFDictionarySP	pDictionary;
	IAAFSourceMobSP		pSourceMob;
	IAAFMobSP			pMob;
	IAAFEssenceDescriptorSP pEssenceDesciptor;

	CheckResult (pFile->GetHeader (&pHeader));
	CheckResult (pHeader->GetDictionary (&pDictionary));

	// Create an EssenceData object and associated Mob
	Test_CreateEssenceData(defs, pHeader, sMobID[2], sMobName[2], &pEssenceData);


	// Normally we'd add the essence data object here and, with it attached,
    // write essence to it. Instead establish a call back so that the data
    // may be written later during save.
	CheckResult(pEssenceData->QueryInterface(IID_IAAFObject, (void **)&pObject));
	Test_LookupEssenceDataStreamPropertyDefinitions(pDictionary,
                                             &pDataPropertyDef,
                                             &pSampleIndexPropertyDef);

	CheckResult(pObject->GetPropertyValue(pDataPropertyDef,
                                        &pStreamPropertyValue));
  
	CheckResult(pStreamPropertyValue->GetType(&pTypeDef));
	CheckResult(pTypeDef->QueryInterface(IID_IAAFTypeDefStream3,
                                         (void **)&pTypeDefStream3));

	CheckResult(TestStreamAccess::Create(&cb));
	CheckResult(pTypeDefStream3->SetCallback(pStreamPropertyValue, cb,
		reinterpret_cast<aafMemPtr_t>(const_cast<char *>(sSmiley))));
	cb->Release();
}
Esempio n. 2
0
// Create the test file.
void CAAFTypeDefStream_read (aafCharacter_constptr pFileName) // throw HRESULT
{
  IAAFFileSP pFile;

  try
  {
    IAAFHeaderSP pHeader;
    IAAFDictionarySP pDictionary;
    IAAFEssenceDataSP pEssenceData;
    IAAFPropertyValueSP pDataPropertyValue;
    IAAFPropertyValueSP pSampleIndexPropertyValue;

    aafUID_t  fileKind;
    aafBool isAAFFile = kAAFFalse;
    CheckResult (AAFFileIsAAFFile(pFileName, &fileKind, &isAAFFile));
    CheckExpression(isAAFFile == kAAFTrue, AAFRESULT_TEST_FAILED);

    CheckResult (AAFFileOpenExistingRead(pFileName, 0, &pFile));
    CheckResult (pFile->GetHeader (&pHeader));
    CheckResult (pHeader->GetDictionary (&pDictionary));

    CAAFBuiltinDefs defs (pDictionary);

#if 1
    // Missing api method!
    CheckResult (pHeader->LookupEssenceData(sMobID[0], &pEssenceData));
#else
    // For this version of the test assume that there is only a single
    // essence data...
    aafUInt32 count;
    CheckResult(pHeader->CountEssenceData(&count));
    CheckExpression(1 == count, AAFRESULT_TEST_FAILED);
    IEnumAAFEssenceDataSP pEnumEssenceData;
    CheckResult(pHeader->EnumEssenceData(&pEnumEssenceData));
    CheckResult(pEnumEssenceData->NextOne(&pEssenceData));
    aafMobID_t testMobID = {{0,0,0,0,0,0,0,0,0,0,0,0},0,0,0,0,
                            {0,0,0,{0,0,0,0,0,0,0,0}}};
    CheckResult(pEssenceData->GetFileMobID(&testMobID));
    CheckExpression(0 == memcmp(&testMobID, &sMobID[0], sizeof(aafMobID_t)),
                    AAFRESULT_TEST_FAILED);  
#endif


    Test_EssenceStreamPropertyValues(pDictionary,
                                     pEssenceData,
                                     &pDataPropertyValue,
                                     &pSampleIndexPropertyValue);

    // Test the required property
    Test_EssenceStreamRead(defs, pDataPropertyValue);

    if(pSampleIndexPropertyValue)
    {
      // Test the optional property
      Test_EssenceStreamRead(defs, pSampleIndexPropertyValue);
    }  


    // Test IAAFTypeDefStream2 methods
    IAAFEssenceDataSP pEssenceData2;

    // sMobID[3] may not be in the file, in the case
    // the file was created by an older test.
    if(pHeader->LookupEssenceData(sMobID[3], &pEssenceData2)==AAFRESULT_SUCCESS)
    {
      IAAFPropertyValueSP pDataPropertyValue2;
      IAAFPropertyValueSP pSampleIndexPropertyValue2;

      Test_EssenceStreamPropertyValues(pDictionary,
                                       pEssenceData2,
                                       &pDataPropertyValue2,
                                       &pSampleIndexPropertyValue2);

    }


    // Test IAAFTypeDefStream3 methods
    IAAFEssenceDataSP pEssenceData3;

    // sMobID[4] may not be in the file, in the case
    // the file was created by an older test.
    if(pHeader->LookupEssenceData(sMobID[4], &pEssenceData3)==AAFRESULT_SUCCESS)
    {
      IAAFPropertyValueSP pDataPropertyValue3;
      IAAFPropertyValueSP pSampleIndexPropertyValue3;

      Test_EssenceStreamPropertyValues(pDictionary,
                                       pEssenceData3,
                                       &pDataPropertyValue3,
                                       &pSampleIndexPropertyValue3);

      Test_KLVStreamParametersOnRead(defs, pDataPropertyValue3);
      Test_EssenceStreamRead(defs, pDataPropertyValue3);
    }


    // Test the case when the stream data size approaches the KLV
    // Alignment Grid (KAG) boundary and leaves some but not enough
    // space to pad to the end of the boundary.
    // (This is a test of edge conditions specific to KLV encoded files.)
    IAAFEssenceDataSP pEssenceData4;

    // sMobID[4] may not be in the file, in the case
    // the file was created by an older test.
    if(pHeader->LookupEssenceData(sMobID[5], &pEssenceData4)==AAFRESULT_SUCCESS)
    {
      IAAFPropertyValueSP pDataPropertyValue4;
      IAAFPropertyValueSP pSampleIndexPropertyValue4;

      Test_EssenceStreamPropertyValues(pDictionary,
                                       pEssenceData4,
                                       &pDataPropertyValue4,
                                       &pSampleIndexPropertyValue4);

      Test_NearKAGBoundaryRead(defs, pDataPropertyValue4);
    }


    CheckResult(pFile->Close());
  }
  catch(AAFRESULT& hr)
  {
    // Ignore failure if file not open
    pFile->Close();
    CheckResult(hr);
  }
}
Esempio n. 3
0
// Create the test file.
void CAAFTypeDefStream_create (
    aafCharacter_constptr pFileName,
    aafUID_constref fileKind,
    testRawStorageType_t rawStorageType,
    aafProductIdentification_constref productID)
{
  IAAFFileSP pFile;

  try
  {
    IAAFHeaderSP pHeader;
    IAAFDictionarySP pDictionary;
    IAAFSourceMobSP pSourceMob;
    IAAFMobSP pMob;
    IAAFEssenceDescriptorSP pEssenceDesciptor;
    IAAFEssenceDataSP pEssenceData;
    IAAFPropertyValueSP pDataPropertyValue;
    IAAFPropertyValueSP pSampleIndexPropertyValue;

    // Remove the previous test file is one exists
    ::RemoveTestFile (pFileName);

    // Create the file.
    CheckResult (CreateTestFile( pFileName, fileKind, rawStorageType, productID, &pFile ));
    CheckResult (pFile->GetHeader (&pHeader));
    CheckResult (pHeader->GetDictionary (&pDictionary));

    CAAFBuiltinDefs defs (pDictionary);

    // Create an EssenceData object and associated Mob
    Test_CreateEssenceData(defs, pHeader, sMobID[0], sMobName[0], &pEssenceData);

    Test_EssenceStreamPropertyValues(pDictionary,
                                     pEssenceData,
                                     &pDataPropertyValue,
                                     &pSampleIndexPropertyValue);

    // Test the required property
    Test_EssenceStreamWrite(defs, pDataPropertyValue);
    Test_EssenceStreamRead(defs, pDataPropertyValue);

    if (pSampleIndexPropertyValue)
    {
    // Test the optional property
      Test_EssenceStreamWrite(defs, pSampleIndexPropertyValue);
      Test_EssenceStreamRead(defs, pSampleIndexPropertyValue);
    }

    Test_EssenceStreamPullWrite(pFile, defs);

    // Test IAAFTypeDefStream2 methods
    IAAFEssenceDataSP pEssenceData2;
    IAAFPropertyValueSP pDataPropertyValue2;
    IAAFPropertyValueSP pSampleIndexPropertyValue2;

    Test_CreateEssenceData(defs, pHeader, sMobID[3], sMobName[3], &pEssenceData2);

    Test_EssenceStreamPropertyValues(pDictionary,
                                     pEssenceData2,
                                     &pDataPropertyValue2,
                                     &pSampleIndexPropertyValue2);


    // Test IAAFTypeDefStream3 methods
    IAAFEssenceDataSP pEssenceData3;
    IAAFPropertyValueSP pDataPropertyValue3;
    IAAFPropertyValueSP pSampleIndexPropertyValue3;

    Test_CreateEssenceData(defs, pHeader, sMobID[4], sMobName[4], &pEssenceData3);

    Test_EssenceStreamPropertyValues(pDictionary,
                                     pEssenceData3,
                                     &pDataPropertyValue3,
                                     &pSampleIndexPropertyValue3);

    Test_KLVStreamParametersOnWrite(defs, pDataPropertyValue3);
    Test_EssenceStreamWrite(defs, pDataPropertyValue3);
    Test_KLVStreamParametersOnRead(defs, pDataPropertyValue3);
    Test_EssenceStreamRead(defs, pDataPropertyValue3);


    // Test the case when the stream data size approaches the KLV
    // Alignment Grid (KAG) boundary and leaves some but not enough
    // space to pad to the end of the boundary.
    // (This is a test of edge conditions specific to KLV encoded files.)
    IAAFEssenceDataSP pEssenceData4;
    IAAFPropertyValueSP pDataPropertyValue4;
    IAAFPropertyValueSP pSampleIndexPropertyValue4;

    Test_CreateEssenceData(defs, pHeader, sMobID[5], sMobName[5], &pEssenceData4);

    Test_EssenceStreamPropertyValues(pDictionary,
                                     pEssenceData4,
                                     &pDataPropertyValue4,
                                     &pSampleIndexPropertyValue4);

    Test_NearKAGBoundaryWrite(defs, pDataPropertyValue4);
    Test_NearKAGBoundaryRead(defs, pDataPropertyValue4);


    CheckResult(pFile->Save());
    CheckResult(pFile->Close());
  }
  catch(AAFRESULT& hr)
  {
    // Ignore failure if file not open
    pFile->Close();
    CheckResult(hr);
  }
}
Esempio n. 4
0
static HRESULT ReadRecord (const aafWChar * pFileName, int loadingMode)
{
  HRESULT hr = E_FAIL;
  IAAFFileSP   pFile;

  try 
	{
	  // Open the file, and get the dictionary.
	  checkResult(AAFFileOpenExistingRead(pFileName, loadingMode, &pFile));
	  IAAFHeaderSP pHeader;
	  checkResult(pFile->GetHeader(&pHeader));
	  IAAFDictionarySP pDict;
	  checkResult (pHeader->GetDictionary(&pDict));
	  CAAFBuiltinDefs defs(pDict);

	  // get the SDK version against which we are testing
	  aafProductVersion_t			testVer;
	  checkResult(pHeader->GetRefImplVersion(&testVer));

	  // Get the type definitions for our new types.
	  IAAFTypeDefSP ptd;
	  checkResult (pDict->LookupTypeDef (sTypeId_Rational16,
										 &ptd));
	  IAAFTypeDefRecordSP ptdr16;
	  checkResult (ptd->QueryInterface (IID_IAAFTypeDefRecord,
										(void**) &ptdr16));

	  // check for duplicate initialization
	  aafUID_t nullUid = { 0 };
	  HRESULT temphr;
	  temphr = ptdr16->Initialize (nullUid,
								  0,
								  0,
								  1,
								  L"foo");
	  checkExpression (AAFRESULT_ALREADY_INITIALIZED == temphr,
					   AAFRESULT_TEST_FAILED);

	  aafUInt32 count = 0;
	  checkResult (ptdr16->GetCount (&count));
	  checkExpression (2 == count, AAFRESULT_TEST_FAILED);

	  aafUInt32  nameLen = 0;
	  aafCharacter nameBuf [100];
	  checkResult (ptdr16->GetMemberNameBufLen (0, &nameLen));
	  checkExpression (((wcslen(L"Numerator")+1)*sizeof(aafCharacter))
					   == nameLen,
					   AAFRESULT_TEST_FAILED);
	  checkExpression (nameLen < 100,
					   AAFRESULT_TEST_FAILED);
	  checkResult (ptdr16->GetMemberName (0,
										 nameBuf,
										 sizeof (nameBuf)));
	  checkExpression (0 == wcscmp (L"Numerator", nameBuf),
					   AAFRESULT_TEST_FAILED);

	  checkResult (ptdr16->GetMemberNameBufLen (1, &nameLen));
	  checkExpression (((wcslen(L"Denominator")+1)*sizeof (aafCharacter))
					   == nameLen,
					   AAFRESULT_TEST_FAILED);
	  checkExpression (nameLen < 100,
					   AAFRESULT_TEST_FAILED);
	  checkResult (ptdr16->GetMemberName (1,
										 nameBuf,
										 sizeof (nameBuf)));
	  checkExpression (0 == wcscmp (L"Denominator", nameBuf),
					   AAFRESULT_TEST_FAILED);

	  temphr = ptdr16->GetMemberNameBufLen (2, &nameLen);
	  checkExpression (AAFRESULT_ILLEGAL_VALUE == temphr,
					   AAFRESULT_TEST_FAILED);

	  temphr = ptdr16->GetMemberName (2,
									 nameBuf,
									 sizeof (nameBuf));
	  checkExpression (AAFRESULT_ILLEGAL_VALUE == temphr,
					   AAFRESULT_TEST_FAILED);

	  checkResult (pDict->LookupTypeDef (sTypeId_Rational16_pair,
										 &ptd));
	  IAAFTypeDefRecordSP ptdr16p;
	  checkResult (ptd->QueryInterface (IID_IAAFTypeDefRecord,
										(void**) &ptdr16p));

	  // check for duplicate initialization
	  temphr = ptdr16p->Initialize (nullUid,
								   0,
								   0,
								   1,
								   L"foo");
	  checkExpression (AAFRESULT_ALREADY_INITIALIZED == temphr,
					   AAFRESULT_TEST_FAILED);

	  count = 0;
	  checkResult (ptdr16p->GetCount (&count));
	  checkExpression (2 == count, AAFRESULT_TEST_FAILED);

	  // Now attempt to register offsets of Rational16_pair.  This
	  // should fail, because offsets of its members (of type
	  // Rational16) have not yet been registered.
	  temphr = RegisterRational16PairOffsets (ptdr16p);
	  checkExpression (temphr == AAFRESULT_NOT_REGISTERED,
					   AAFRESULT_TEST_FAILED);

	  // Now let's attempt registration the right way.
	  checkResult (RegisterRational16Offsets (ptdr16));
	  checkResult (RegisterRational16PairOffsets (ptdr16p));
		
	  // Setup to read the Velocity property which is of typed Mixed_t
	  checkResult (pDict->LookupTypeDef (sTypeId_Mixed, &ptd));
	  IAAFTypeDefRecordSP ptdrmixed;
	  checkResult (ptd->QueryInterface (IID_IAAFTypeDefRecord, (void**) &ptdrmixed));
	  temphr = RegisterMixedOffsets(ptdrmixed);
	  /* It is ok to return default already used due to current limitation
           * in implementation that default registration may occur and tie us
           * to a specific structural layout before we get the ability to
           * register own offsets/layout. This is slated for fixing in
           * future rev of the SDK.
           */
	  if (temphr == AAFRESULT_DEFAULT_ALREADY_USED) {
	      temphr = AAFRESULT_SUCCESS;
	      throw temphr;
	  }

	  checkResult (temphr);

	  IAAFTypeDef * pTempTd = 0;
	  checkResult (ptdr16->QueryInterface (IID_IAAFTypeDef,
										(void**) &pTempTd));
	  CheckMemberTypeEqual (ptdr16p, 0, pTempTd);
	  CheckMemberTypeEqual (ptdr16p, 1, pTempTd);
	  pTempTd->Release ();
	  pTempTd = 0;

	  temphr = ptdr16p->GetMemberType (2, &pTempTd);
	  checkExpression (temphr == AAFRESULT_ILLEGAL_VALUE,
					   AAFRESULT_TEST_FAILED);

	  // register variable array of Rational16Pair records
	  IAAFTypeDefVariableArraySP ptdvaarpr;
	  IAAFTypeDefSP ptdarpr;
	  // perform this part only for specified versions
	  if( versionUInt(testVer) >= versionUInt(1,1,1,0) )
	  {
		checkResult (pDict->LookupTypeDef (sTypeId_Rational16_array,&ptdarpr));
		checkResult (ptdarpr->QueryInterface (IID_IAAFTypeDefVariableArray,(void**) &ptdvaarpr));
	  }

	  // Now read the CompositionMob to which we added some optional
	  // properties.
	  IEnumAAFMobsSP pEnumMobs;
	  checkResult (pHeader->GetMobs (0, &pEnumMobs));

	  IAAFMobSP pMob;
	  checkResult (pEnumMobs->NextOne (&pMob));
	  IAAFObjectSP pObj;
	  checkResult (pMob->QueryInterface (IID_IAAFObject,
										 (void**) &pObj));

	  // get the property definitions for the added properties
	  IAAFPropertyDefSP pPdPosA;
	  checkResult (defs.cdCompositionMob()->
				   LookupPropertyDef (sPropertyId_positionA,
									  &pPdPosA));
	  IAAFPropertyDefSP pPdPosB;
	  checkResult (defs.cdCompositionMob()->
				   LookupPropertyDef (sPropertyId_positionB,
									  &pPdPosB));
	  IAAFPropertyDefSP pPdPosC;
	  checkResult (defs.cdCompositionMob()->
				   LookupPropertyDef (sPropertyId_positionC,
									  &pPdPosC));

	  IAAFPropertyValueSP pPVa;
	  checkResult (pObj->GetPropertyValue (pPdPosA, &pPVa));
	  IAAFPropertyValueSP pPVb;
	  checkResult (pObj->GetPropertyValue (pPdPosB, &pPVb));
	  IAAFPropertyValueSP pPVc;
	  checkResult (pObj->GetPropertyValue (pPdPosC, &pPVc));

	  // Read back the value of the Velocity property
	  IAAFPropertyDefSP pPdvelocity;
	  checkResult (defs.cdCompositionMob()->LookupPropertyDef(sPropertyId_velocity, &pPdvelocity));
	  IAAFPropertyValueSP pPVvelocity;
	  checkResult (pObj->GetPropertyValue (pPdvelocity, &pPVvelocity));
	  Mixed_t velocity = {0, 0};
	  checkResult (ptdrmixed->GetStruct (pPVvelocity, (aafMemPtr_t) &velocity, sizeof (velocity)));
	  checkExpression (15 == velocity.angle, AAFRESULT_TEST_FAILED);
	  checkExpression (2001 == velocity.speed, AAFRESULT_TEST_FAILED);

	  // Try to read the first one with GetStruct.
	  Rational16pair_t valA = { {0,0},{0,0} };
	  checkResult (ptdr16p->GetStruct (pPVa,
									  (aafMemPtr_t) &valA,
									  sizeof (valA)));
	  checkExpression (1 == valA.X_Position.Numerator,
					   AAFRESULT_TEST_FAILED);
	  checkExpression (2 == valA.X_Position.Denominator,
					   AAFRESULT_TEST_FAILED);
	  checkExpression (3 == valA.Y_Position.Numerator,
					   AAFRESULT_TEST_FAILED);
	  checkExpression (4 == valA.Y_Position.Denominator,
					   AAFRESULT_TEST_FAILED);

	  // Try to read the second one by decomposing with GetValue.
	  Rational16pair_t valB = { {5, 6}, {7, 8} };
	  CheckRational16PairByValues (ptdr16p, ptdr16, pPVb, valB);

	  // Read the last two with GetStruct just to get it over with. ;)
	  Rational16pair_t valC = { {0,0},{0,0} };
	  temphr = ptdr16p->GetStruct (pPVc,
								  (aafMemPtr_t) &valC,
								  sizeof (valC)-1);
	  checkExpression (AAFRESULT_ILLEGAL_VALUE == temphr,
					   AAFRESULT_TEST_FAILED);
	  temphr = ptdr16p->GetStruct (0,
								  (aafMemPtr_t) &valC,
								  sizeof (valC));
	  checkExpression (AAFRESULT_NULL_PARAM == temphr,
					   AAFRESULT_TEST_FAILED);
	  temphr = ptdr16p->GetStruct (pPVc,
								  0,
								  sizeof (valC));
	  checkExpression (AAFRESULT_NULL_PARAM == temphr,
					   AAFRESULT_TEST_FAILED);
	  checkResult (ptdr16p->GetStruct (pPVc,
									  (aafMemPtr_t) &valC,
									  sizeof (valC)));
	  checkExpression (9 == valC.X_Position.Numerator,
					   AAFRESULT_TEST_FAILED);
	  checkExpression (10 == valC.X_Position.Denominator,
					   AAFRESULT_TEST_FAILED);
	  checkExpression (11 == valC.Y_Position.Numerator,
					   AAFRESULT_TEST_FAILED);
	  checkExpression (12 == valC.Y_Position.Denominator,
					   AAFRESULT_TEST_FAILED);

	  // test variable array of records
	  // perform this part only for specified versions
	  if( versionUInt(testVer) >= versionUInt(1,1,1,0) )
	  {
		IAAFPropertyDefSP pPdPosN;
		checkResult (defs.cdCompositionMob()->LookupPropertyDef (sPropertyId_positionN,	&pPdPosN));
		IAAFPropertyValueSP pPVN;
		checkResult (pObj->GetPropertyValue (pPdPosN, &pPVN));

		// get the middle element of the array, 9abc
		IAAFPropertyValueSP pPVN1;
		checkResult (ptdvaarpr->GetElementValue (pPVN, 1, &pPVN1));

		// Read the value with GetStruct
		Rational16pair_t valN1 = { {0,0},{0,0} };
		checkResult (ptdr16p->GetStruct (pPVN1,
										(aafMemPtr_t) &valN1,
										sizeof (valN1)));
		checkExpression (9 == valN1.X_Position.Numerator,
						AAFRESULT_TEST_FAILED);
		checkExpression (10 == valN1.X_Position.Denominator,
						AAFRESULT_TEST_FAILED);
		checkExpression (11 == valN1.Y_Position.Numerator,
						AAFRESULT_TEST_FAILED);
		checkExpression (12 == valN1.Y_Position.Denominator,
						AAFRESULT_TEST_FAILED);
	  }

	  // Attempt to close the file.
	  checkResult(pFile->Close());
	  IAAFFileSP nullFile;
	  pFile = nullFile;  // zeros the pFile, and releases it.

	  hr = AAFRESULT_SUCCESS;
	}
  catch (HRESULT& rResult)
	{
	  hr = rResult;
	}
	
  // cleanup
  if (pFile)
	{
	  pFile->Close();
	}
	
  return hr;
}
Esempio n. 5
0
static HRESULT ReadRecordNoStructs (const aafWChar * pFileName, int loadingMode)
{
  HRESULT hr = E_FAIL;
  HRESULT temphr;
  IAAFFileSP   pFile;

  try 
	{
	  // Open the file, and get the dictionary.
	  checkResult(AAFFileOpenExistingRead(pFileName, loadingMode, &pFile));
	  IAAFHeaderSP pHeader;
	  checkResult(pFile->GetHeader(&pHeader));
	  IAAFDictionarySP pDict;
	  checkResult (pHeader->GetDictionary(&pDict));
	  CAAFBuiltinDefs defs(pDict);

	  // get the SDK version against which we are testing
	  aafProductVersion_t			testVer;
	  checkResult(pHeader->GetRefImplVersion(&testVer));

	  // Get the type definitions for our new types.
	  IAAFTypeDefSP ptd;
	  checkResult (pDict->LookupTypeDef (sTypeId_Rational16,
										 &ptd));
	  IAAFTypeDefRecordSP ptdr16;
	  checkResult (ptd->QueryInterface (IID_IAAFTypeDefRecord,
										(void**) &ptdr16));

	  checkResult (pDict->LookupTypeDef (sTypeId_Rational16_pair,
										 &ptd));
	  IAAFTypeDefRecordSP ptdr16p;
	  checkResult (ptd->QueryInterface (IID_IAAFTypeDefRecord,
										(void**) &ptdr16p));

	  // Setup to read the Velocity property which is of typed Mixed_t
	  checkResult (pDict->LookupTypeDef (sTypeId_Mixed, &ptd));
	  IAAFTypeDefRecordSP ptdrmixed;
	  checkResult (ptd->QueryInterface (IID_IAAFTypeDefRecord, (void**) &ptdrmixed));

	  IAAFTypeDef * pTempTd = 0;
	  checkResult (ptdr16->QueryInterface (IID_IAAFTypeDef,
										(void**) &pTempTd));
	  CheckMemberTypeEqual (ptdr16p, 0, pTempTd);
          CheckMemberTypeEqual (ptdr16p, 1, pTempTd);
	  pTempTd->Release ();
	  pTempTd = 0;

	  temphr = ptdr16p->GetMemberType (2, &pTempTd);
	  checkExpression (temphr == AAFRESULT_ILLEGAL_VALUE,
					   AAFRESULT_TEST_FAILED);

	  // register variable array of Rational16Pair records
	  IAAFTypeDefVariableArraySP ptdvaarpr;
	  IAAFTypeDefSP ptdarpr;
	  // perform this part only for specified versions
	  if( versionUInt(testVer) >= versionUInt(1,1,1,0) )
	  {
		checkResult (pDict->LookupTypeDef (sTypeId_Rational16_array,&ptdarpr));
		checkResult (ptdarpr->QueryInterface (IID_IAAFTypeDefVariableArray,(void**) &ptdvaarpr));
	  }

	  // Now read the CompositionMob to which we added some optional
	  // properties.
	  IEnumAAFMobsSP pEnumMobs;
	  checkResult (pHeader->GetMobs (0, &pEnumMobs));

	  IAAFMobSP pMob;
	  checkResult (pEnumMobs->NextOne (&pMob));
	  IAAFObjectSP pObj;
	  checkResult (pMob->QueryInterface (IID_IAAFObject,
										 (void**) &pObj));

	  // get the property definitions for the added properties
	  IAAFPropertyDefSP pPdPosA;
	  checkResult (defs.cdCompositionMob()->
				   LookupPropertyDef (sPropertyId_positionA,
									  &pPdPosA));
	  IAAFPropertyDefSP pPdPosB;
	  checkResult (defs.cdCompositionMob()->
				   LookupPropertyDef (sPropertyId_positionB,
									  &pPdPosB));
	  IAAFPropertyDefSP pPdPosC;
	  checkResult (defs.cdCompositionMob()->
				   LookupPropertyDef (sPropertyId_positionC,
									  &pPdPosC));

	  IAAFPropertyValueSP pPVa;
	  checkResult (pObj->GetPropertyValue (pPdPosA, &pPVa));
	  IAAFPropertyValueSP pPVb;
	  checkResult (pObj->GetPropertyValue (pPdPosB, &pPVb));
	  IAAFPropertyValueSP pPVc;
	  checkResult (pObj->GetPropertyValue (pPdPosC, &pPVc));

	  // Read back the value of the Velocity property
	  IAAFPropertyDefSP pPdvelocity;
	  checkResult (defs.cdCompositionMob()->LookupPropertyDef(sPropertyId_velocity, &pPdvelocity));
	  IAAFPropertyValueSP pPVvelocity;
	  checkResult (pObj->GetPropertyValue (pPdvelocity, &pPVvelocity));

	  IAAFPropertyValueSP pPVvelocityAngle, pPVvelocitySpeed;
	  checkResult (ptdrmixed->GetValue (pPVvelocity, 0, &pPVvelocityAngle));
	  checkResult (ptdrmixed->GetValue (pPVvelocity, 1, &pPVvelocitySpeed));
      
	  Mixed_t velocity = {0, 0};
	  IAAFTypeDefSP pTDmem;
	  IAAFTypeDefIntSP pTDIntMem;
	  checkResult (ptdrmixed->GetMemberType (0, &pTDmem));
	  checkResult (pTDmem->QueryInterface (IID_IAAFTypeDefInt,
                                  (void **) &pTDIntMem));
	  checkResult (pTDIntMem->GetInteger (pPVvelocityAngle, 
                                   (aafMemPtr_t)(&velocity.angle), 
                                   sizeof(velocity.angle)));
	  checkResult (ptdrmixed->GetMemberType (1, &pTDmem));
	  checkResult (pTDmem->QueryInterface (IID_IAAFTypeDefInt,
                                      (void **) &pTDIntMem));
	  checkResult (pTDIntMem->GetInteger (pPVvelocitySpeed, 
	                           (aafMemPtr_t)(&velocity.speed),
	                           sizeof(velocity.speed)));

	  checkExpression (15 == velocity.angle, AAFRESULT_TEST_FAILED);
	  checkExpression (2001 == velocity.speed, AAFRESULT_TEST_FAILED);

	  // Try to read the first one
	  Rational16pair_t valA = { {1, 2}, {3, 4} };
	  CheckRational16PairByValues (ptdr16p, ptdr16, pPVa, valA);


	  // Try to read the second one
	  Rational16pair_t valB = { {5, 6}, {7, 8} };
	  CheckRational16PairByValues (ptdr16p, ptdr16, pPVb, valB);

          // Check misc. error return conditions for TypeDefRecord GetValue
          IAAFPropertyValueSP junkPv;
	  temphr = ptdr16->GetValue (0, 1, &junkPv);
	  checkExpression (AAFRESULT_NULL_PARAM == temphr,
					   AAFRESULT_TEST_FAILED);
	  temphr = ptdr16p->GetValue (pPVb, 1, 0);
	  checkExpression (AAFRESULT_NULL_PARAM == temphr,
					   AAFRESULT_TEST_FAILED);

	  // Read the last two with GetStruct just to get it over with. ;)
	  Rational16pair_t valC = { {9, 10}, {11, 12} };
	  CheckRational16PairByValues (ptdr16p, ptdr16, pPVc, valC);

	  // test variable array of records
	  // perform this part only for specified versions
	  if( versionUInt(testVer) >= versionUInt(1,1,1,0) )
	  {
		IAAFPropertyDefSP pPdPosN;
		checkResult (defs.cdCompositionMob()->LookupPropertyDef (sPropertyId_positionN,	&pPdPosN));
		IAAFPropertyValueSP pPVN;
		checkResult (pObj->GetPropertyValue (pPdPosN, &pPVN));

		// get the middle element of the array, 9abc
		IAAFPropertyValueSP pPVN1;
		checkResult (ptdvaarpr->GetElementValue (pPVN, 1, &pPVN1));

		// Read the value with GetStruct
		Rational16pair_t valN1 = { {9,10},{11,12} };
		CheckRational16PairByValues (ptdr16p, ptdr16, pPVN1, valN1);
	  }

	  // Attempt to close the file.
	  checkResult(pFile->Close());
	  IAAFFileSP nullFile;
	  pFile = nullFile;  // zeros the pFile, and releases it.

	  hr = AAFRESULT_SUCCESS;
	}
  catch (HRESULT& rResult)
	{
	  hr = rResult;
	}
	
  // cleanup
  if (pFile)
	{
	  pFile->Close();
	}
	
  return hr;
}
Esempio n. 6
0
static HRESULT WriteRecord (
    const aafWChar * pFileName,
    aafUID_constref fileKind,
    testRawStorageType_t rawStorageType,
    aafProductIdentification_constref productID)
{
  HRESULT hr = E_FAIL;
  IAAFFileSP   pFile;

  try 
	{
	  HRESULT temphr;

	  // Remove the previous test file if any.
	  RemoveTestFile(pFileName);

	  // Create the file and get the new file's header.
	  checkResult(CreateTestFile( pFileName, fileKind, rawStorageType, productID, &pFile ));
	  IAAFHeaderSP pHeader;
  	  checkResult(pFile->GetHeader(&pHeader));
	  IAAFDictionarySP pDict;
	  checkResult (pHeader->GetDictionary(&pDict));
	  CAAFBuiltinDefs defs(pDict);

	  // get the SDK version against which we are testing
      aafProductVersion_t			testVer;
      checkResult(pHeader->GetRefImplVersion(&testVer));

	  // Create, initialize, and register the Rational16 type, to
	  // consist of an Int16 numerator and a UInt16 denominator.
	  IAAFTypeDef* tdr16MemberTypes[] =
	  {defs.tdInt16(),
	   defs.tdUInt16()};
	  aafWChar numerator[] = L"Numerator";
	  aafWChar denominator[] = L"Denominator";
	  aafString_t tdr16MemberNames[] =
	  {numerator,
	   denominator};
	  IAAFTypeDefRecordSP ptdr16;
	  checkResult (pDict->
				   CreateMetaInstance (kAAFClassID_TypeDefRecord,
									   IID_IAAFTypeDefRecord,
									   (IUnknown**) &ptdr16));

	  checkResult (ptdr16->Initialize (sTypeId_Rational16,
									  tdr16MemberTypes,
									  tdr16MemberNames,
									  2,
									  L"Rational16"));

	  // check for duplicate initialization
	  temphr = ptdr16->Initialize (sTypeId_Rational16,
								  tdr16MemberTypes,
								  tdr16MemberNames,
								  2,
								  L"Rational16");
	  checkExpression (AAFRESULT_ALREADY_INITIALIZED == temphr,
					   AAFRESULT_TEST_FAILED);

	  IAAFTypeDefSP ptd;
	  checkResult (ptdr16->QueryInterface (IID_IAAFTypeDef, (void**) &ptd));
	  checkResult (pDict->RegisterTypeDef (ptd));

	  // Create, initialize, and register the Rational16Position type,
	  // to consist of a Rational16 X and Rational16 Y coordinates.

	  IAAFTypeDefRecordSP ptdr16p;
	  //checkResult (defs.cdTypeDefRecord()->
	  // CreateInstance (IID_IAAFTypeDefRecord,
	  // (IUnknown**)&ptdr16p));
	  checkResult (pDict->
				   CreateMetaInstance (kAAFClassID_TypeDefRecord,
									   IID_IAAFTypeDefRecord,
									   (IUnknown**) &ptdr16p));

	  IAAFTypeDef * pTempTd = 0;
	  checkResult (ptdr16->QueryInterface (IID_IAAFTypeDef,
										  (void**) &pTempTd));	  
	  IAAFTypeDef* tdr16pMemberTypes[] =
	  {pTempTd,
	   pTempTd};
	  aafWChar xpos[] = L"X Position";
	  aafWChar ypos[] = L"Y Position";
	  aafString_t tdr16pMemberNames[] =
	  {xpos,
	   ypos};
	  checkResult (ptdr16p->Initialize (sTypeId_Rational16_pair,
									   tdr16pMemberTypes,
									   tdr16pMemberNames,
									   2,
									   L"Rational16Pair"));
	  // check for duplicate initialization
	  temphr = ptdr16p->Initialize (sTypeId_Rational16,
								   tdr16pMemberTypes,
								   tdr16pMemberNames,
								   2,
								   L"Rational16Pair");
	  checkExpression (AAFRESULT_ALREADY_INITIALIZED == temphr,
					   AAFRESULT_TEST_FAILED);

	  pTempTd->Release ();
	  pTempTd = 0;
	  checkResult (ptdr16p->QueryInterface (IID_IAAFTypeDef, (void**) &ptd));
	  checkResult (pDict->RegisterTypeDef (ptd));

	  // Now attempt to register offsets of Rational16_pair.  This
	  // should fail, because offsets of its members (of type
	  // Rational16) have not yet been registered.
	  temphr = RegisterRational16PairOffsets (ptdr16p);
	  checkExpression (temphr == AAFRESULT_NOT_REGISTERED,
					   AAFRESULT_TEST_FAILED);

	  // Now let's attempt registration the right way.
	  checkResult (RegisterRational16Offsets (ptdr16));
	  checkResult (RegisterRational16PairOffsets (ptdr16p));

	  // register variable array of Rational16Pair records
	  IAAFTypeDefVariableArraySP ptdvaarpr;
	  IAAFTypeDefSP ptdarpr;
	  // perform this part only for specified versions
	  if( versionUInt(testVer) >= versionUInt(1,1,1,0) )
	  {
		//Create a Variable Array
		checkResult(pDict->CreateMetaInstance (AUID_AAFTypeDefVariableArray, IID_IAAFTypeDefVariableArray, (IUnknown **) &ptdvaarpr));
		
		//IAAFTypeDefVariableArray::Initialize
		checkResult(ptdvaarpr->Initialize(sTypeId_Rational16_array, ptd, L"Rational16PairArray"));
		
		//  Register our new VA type def :
		checkResult(ptdvaarpr->QueryInterface(IID_IAAFTypeDef, (void**)&ptdarpr));
		checkResult(pDict->RegisterTypeDef(ptdarpr));
	  }

	  // Create a new property on Composition mob (called Position)
	  // whose type is Rational16_pair.
	  checkResult (ptdr16p->QueryInterface (IID_IAAFTypeDef,
										   (void**) &ptd));
	  IAAFPropertyDefSP pPropDefPosA;
	  IAAFPropertyDefSP pPropDefPosB;
	  IAAFPropertyDefSP pPropDefPosC;
	  checkResult (defs.cdCompositionMob()->RegisterOptionalPropertyDef
				   (sPropertyId_positionA,
					L"PositionA",
					ptd,
					&pPropDefPosA));
	  checkResult (defs.cdCompositionMob()->RegisterOptionalPropertyDef
				   (sPropertyId_positionB,
					L"PositionB",
					ptd,
					&pPropDefPosB));
	  checkResult (defs.cdCompositionMob()->RegisterOptionalPropertyDef
				   (sPropertyId_positionC,
					L"PositionC",
					ptd,
					&pPropDefPosC));

	  // register property of type variable array of Rational16Pair records
	  IAAFPropertyDefSP pPropDefPosN;
	  // perform this part only for specified versions
	  if( versionUInt(testVer) >= versionUInt(1,1,1,0) )
	  {
		checkResult (defs.cdCompositionMob()->RegisterOptionalPropertyDef
					(sPropertyId_positionN,
						L"PositionN",
						ptdarpr,
						&pPropDefPosN));
	  }


	  // Register the Mixed_t type
	  IAAFTypeDef* tdMixedMemberTypes[] = {defs.tdInt8(), defs.tdUInt32()};
	  aafWChar str_angle[] = L"Angle";
	  aafWChar str_speed[] = L"Speed";
	  aafString_t tdMixedMemberNames[] = {str_angle, str_speed};
	  IAAFTypeDefRecordSP ptdrmixed;
	  checkResult(pDict->CreateMetaInstance(kAAFClassID_TypeDefRecord, IID_IAAFTypeDefRecord, (IUnknown**) &ptdrmixed));
	  checkResult(ptdrmixed->Initialize(sTypeId_Mixed, tdMixedMemberTypes, tdMixedMemberNames, 2, L"Mixed"));
	  //  Register Mixed type def
	  IAAFTypeDefSP ptdmixed;
	  checkResult(ptdrmixed->QueryInterface(IID_IAAFTypeDef, (void**)&ptdmixed));
	  checkResult(pDict->RegisterTypeDef(ptdmixed));
	  checkResult(RegisterMixedOffsets(ptdrmixed));
	  // Added Velocity property to Composition Mob
	  IAAFPropertyDefSP pPropDefVelocity;
	  checkResult (defs.cdCompositionMob()->RegisterOptionalPropertyDef
				   (sPropertyId_velocity,
					L"Velocity",
					ptdmixed,
					&pPropDefVelocity));


	  // Create one of our new CompositionMobs, and add a values for
	  // the Position property.
	  IAAFCompositionMobSP pcm;
	  checkResult (defs.cdCompositionMob()->
				   CreateInstance (IID_IAAFCompositionMob,
								   (IUnknown**)&pcm));

	  // Add property value for PositionA using CreateValueFromValues
	  // methods.  The constituent property values will be created
	  // from CreateValueFromStruct, and from SetValueFromStruct.

	  const Rational16_t v_12 = {1, 2};
	  const Rational16_t v_34 = {3, 4};
	  IAAFPropertyValue * pValRat[2] = { 0 };

	  checkResult (ptdr16->
				   CreateValueFromStruct ((aafMemPtr_t) &v_12,
										  sizeof (v_12),
										  &pValRat[0]));
	  // create it with wrong data, and use SetStruct to give it right
	  // data
	  checkResult (ptdr16->
				   CreateValueFromStruct ((aafMemPtr_t) &v_12,
										  sizeof (v_12),
										  &pValRat[1]));
	  checkResult (ptdr16->
				   SetStruct (pValRat[1],
							  (aafMemPtr_t) &v_34,
							  sizeof (v_34)));

	  // Create the Rational16_pair property value from the
	  // Rational16 property values.
	  IAAFPropertyValueSP pRat16PairVal_1234;
	  temphr = ptdr16p->CreateValueFromValues (0,
											  2,
											  &pRat16PairVal_1234);
	  checkExpression (AAFRESULT_NULL_PARAM == temphr,
					   AAFRESULT_TEST_FAILED);
	  temphr = ptdr16p->CreateValueFromValues (pValRat,
											  1,
											  &pRat16PairVal_1234);
	  checkExpression (AAFRESULT_ILLEGAL_VALUE == temphr,
					   AAFRESULT_TEST_FAILED);
	  checkResult (ptdr16p->CreateValueFromValues (pValRat,
												  2,
												  &pRat16PairVal_1234));
	  pValRat[0]->Release ();
	  pValRat[0] = 0;
	  pValRat[1]->Release ();
	  pValRat[1] = 0;

	  IAAFObjectSP pObj;
	  checkResult (pcm->QueryInterface (IID_IAAFObject,
										(void**) &pObj));
	  checkResult (pObj->SetPropertyValue (pPropDefPosA,
										   pRat16PairVal_1234));


	  // Add property value for PositionB using CreateValueFromStruct
	  // methods.
	  const Rational16_t r16_56 = {5, 6};
	  const Rational16_t r16_78 = {7, 8};
	  Rational16pair_t r16p_5678;
	  r16p_5678.X_Position = r16_56;
	  r16p_5678.Y_Position = r16_78;
	  IAAFPropertyValueSP pRat16PairVal_5678;
	  temphr = ptdr16p->
		CreateValueFromStruct (0,
							   sizeof (r16p_5678),
							   &pRat16PairVal_5678);
	  checkExpression (AAFRESULT_NULL_PARAM == temphr,
					   AAFRESULT_TEST_FAILED);
	  temphr = ptdr16p->
		CreateValueFromStruct ((aafMemPtr_t) &r16p_5678,
							   sizeof (r16p_5678),
							   0);
	  checkExpression (AAFRESULT_NULL_PARAM == temphr,
					   AAFRESULT_TEST_FAILED);
	  temphr = ptdr16p->
		CreateValueFromStruct ((aafMemPtr_t) &r16p_5678,
							   sizeof (r16p_5678)+1,
							   &pRat16PairVal_5678);
	  checkExpression (AAFRESULT_ILLEGAL_VALUE == temphr,
					   AAFRESULT_TEST_FAILED);
	  checkResult (ptdr16p->
				   CreateValueFromStruct ((aafMemPtr_t) &r16p_5678,
										  sizeof (r16p_5678),
										  &pRat16PairVal_5678));
	  checkResult (pObj->SetPropertyValue (pPropDefPosB,
										   pRat16PairVal_5678));

	  // Add property value for PositionC using CreateValueFromStruct
	  // methods, and then use SetStruct to set the value.
	  const Rational16_t r16_9a = {9, 10};
	  const Rational16_t r16_bc = {11, 12};
	  Rational16pair_t r16p_9abc;
	  r16p_9abc.X_Position = r16_9a;
	  r16p_9abc.Y_Position = r16_bc;
	  IAAFPropertyValueSP pRat16PairVal_9abc;
	  checkResult (ptdr16p->
				   CreateValueFromStruct ((aafMemPtr_t) &r16p_5678,
										  sizeof (r16p_5678),
										  &pRat16PairVal_9abc));
	  temphr = ptdr16p->SetStruct (0,
								  (aafMemPtr_t) &r16p_9abc,
								  sizeof (r16p_9abc));
	  checkExpression (AAFRESULT_NULL_PARAM == temphr,
					   AAFRESULT_TEST_FAILED);
	  temphr = ptdr16p->SetStruct (pRat16PairVal_9abc,
								  0,
								  sizeof (r16p_9abc));
	  checkExpression (AAFRESULT_NULL_PARAM == temphr,
					   AAFRESULT_TEST_FAILED);
	  temphr = ptdr16p->SetStruct (pRat16PairVal_9abc,
								  (aafMemPtr_t) &r16p_9abc,
								  sizeof (r16p_9abc)-1);
	  checkExpression (AAFRESULT_ILLEGAL_VALUE == temphr,
					   AAFRESULT_TEST_FAILED);
	  checkResult (ptdr16p->SetStruct (pRat16PairVal_9abc,
									  (aafMemPtr_t) &r16p_9abc,
										  sizeof (r16p_9abc)));
	  checkResult (pObj->SetPropertyValue (pPropDefPosC,
										   pRat16PairVal_9abc));

	  // add a value of PropertyN
	  IAAFPropertyValueSP spArrayPropertyValue;
	  // perform this part only for specified versions
	  if( versionUInt(testVer) >= versionUInt(1,1,1,0) )
	  {
	    // Create an empty array and then fill it by appending elements...
  		checkResult( ptdvaarpr->CreateEmptyValue (&spArrayPropertyValue) );
		
	    // intentionally in permuted order
		checkResult( ptdvaarpr->AppendElement(spArrayPropertyValue, pRat16PairVal_5678) );

		checkResult( ptdvaarpr->AppendElement(spArrayPropertyValue, pRat16PairVal_9abc) );

		checkResult( ptdvaarpr->AppendElement(spArrayPropertyValue, pRat16PairVal_1234) );

		// set PropertyN
		checkResult ( pObj->SetPropertyValue( pPropDefPosN, spArrayPropertyValue ) );
	  }

	  // Set the value on the new Velocity property (of Mixed_t type)
	  const Mixed_t velocty = {15, 2001};
	  IAAFPropertyValueSP pVelocity;
	  checkResult (ptdrmixed->CreateValueFromStruct((aafMemPtr_t) &velocty, sizeof(velocty), &pVelocity));
	  checkResult (pObj->SetPropertyValue(pPropDefVelocity, pVelocity));


	  //Put the modified comp mob into the file.
	  IAAFMobSP pMob;
	  checkResult (pcm->QueryInterface (IID_IAAFMob,
										(void**) &pMob));
	  checkResult (pHeader->AddMob(pMob));

	  // Attempt to save the file.
	  checkResult(pFile->Save());
		
	  // Attempt to close the file.
	  checkResult(pFile->Close());
	  IAAFFileSP nullFile;
	  pFile = nullFile;  // zeros the pFile, and releases it.

	  hr = AAFRESULT_SUCCESS;
	}
  catch (HRESULT& rResult)
	{
	  hr = rResult;
	}
	
  // cleanup
  if (pFile)
	{
	  pFile->Save();
	  pFile->Close();
	}
	
  return hr;
}
Esempio n. 7
0
static HRESULT ReadAAFFile(aafWChar* pFileName)
{
  IAAFFileSP           pFile;
  IAAFHeaderSP         pHeader;
  IEnumAAFMobsSP       pMobIter;
  IAAFMobSP            pMob;
  IEnumAAFMobSlotsSP   pSlotIter;
  IAAFMobSlotSP        pSlot;
  IAAFComponentSP      pComp;
  IAAFSegmentSP        pSegment;
  IAAFDataDefSP        pDataDef;
  IAAFSequenceSP       pSequence;
  IAAFDictionarySP     pDictionary;
  IEnumAAFComponentsSP pCompIter;
  aafNumSlots_t        numMobs;
  aafSearchCrit_t      criteria;
  HRESULT              hr = S_OK;
	
  try
	{
	  // Open the AAF file
	  checkResult(AAFFileOpenExistingRead(pFileName, 0, &pFile));

	  // Get the AAF file header.
	  checkResult(pFile->GetHeader(&pHeader));
		
	  // Validate that there is only one composition mob.
	  checkResult(pHeader->CountMobs(kAAFCompMob, &numMobs));
	  checkExpression(1 == numMobs, AAFRESULT_TEST_FAILED);
		
	  // Get the AAF Dictionary so that we can create valid AAF objects.
	  checkResult(pHeader->GetDictionary(&pDictionary));
	  CAAFBuiltinDefs defs (pDictionary);

	  // Check a data definition from a composition MOB in order to test weak references
	  criteria.searchTag = kAAFByMobKind;
	  criteria.tags.mobKind = kAAFCompMob;
	  checkResult(pHeader->GetMobs(&criteria, &pMobIter));
	  while (pMobIter && pMobIter->NextOne(&pMob) == AAFRESULT_SUCCESS)
		{					
		  // Enumerate the first MOB slot for this MOB
		  checkResult(pMob->GetSlots(&pSlotIter));
		  checkResult(pSlotIter->NextOne(&pSlot));

		  checkResult(pSlot->GetSegment(&pSegment));
		  checkResult(pSegment->QueryInterface(IID_IAAFSequence, (void **) &pSequence));
		  checkResult(pSequence->GetComponents(&pCompIter));
		  checkResult(pCompIter->NextOne(&pComp));

		  aafBool  testBool;

		  checkResult(pComp->GetDataDef(&pDataDef));
		  checkResult(pDataDef->IsSoundKind(&testBool));
		  checkExpression(testBool == kAAFFalse, AAFRESULT_TEST_FAILED);

		  checkResult(pDataDef->IsDataDefOf(defs.ddkAAFPictureWithMatte(), &testBool));
		  checkExpression(testBool == kAAFTrue, AAFRESULT_TEST_FAILED);
		
		  // Make sure first component is a filler, and is our extended
		  // class.  To do that, we'll compare the class def we looked
		  // up in the dict, with the one we got from the new object.
		  //
		  // First get the class from the object.
		  IAAFFillerSP pFill;
		  checkResult(pComp->QueryInterface(IID_IAAFFiller,
											(void **) &pFill));
		  assert (pFill);

		  IAAFObjectSP pObj;
		  checkResult(pFill->QueryInterface(IID_IAAFObject,
											(void **) &pObj));
		  assert (pObj);
		  IAAFClassDefSP pClassFromObj;
		  checkResult (pObj->GetDefinition (&pClassFromObj));
		  assert (pClassFromObj);
		  IUnknownSP pUnkFromObj;
		  checkResult(pClassFromObj->QueryInterface(IID_IUnknown,
													(void **) &pUnkFromObj));

		  // Now get the class from the dict
		  IAAFClassDefSP pClassFromDict;
		  checkResult (pDictionary->LookupClassDef (kClassAUID_NewFill,
													&pClassFromDict));
		  assert (pClassFromDict);
		  IUnknownSP pUnkFromDict;
		  checkResult(pClassFromDict->QueryInterface(IID_IUnknown,
													 (void **) &pUnkFromDict));

		  // Compare class from object with class from dict.  Compare
		  // using IUnknown pointers.
		  assert (((IUnknown*)pUnkFromObj) ==
				  ((IUnknown*)pUnkFromDict));

		  // To test GetClassDefinitions(), try explicit lookup.
		  IEnumAAFClassDefsSP pClassDefEnum;
		  checkResult (pDictionary->GetClassDefs (&pClassDefEnum));
		  bool found = false;
		  IAAFClassDefSP cd;
		  while (SUCCEEDED (pClassDefEnum->NextOne (&cd)))
			{
			  IAAFMetaDefinitionSP def;
			  checkResult(cd->QueryInterface(IID_IAAFMetaDefinition,
											 (void **) &def));
			  aafUID_t classid;
			  checkResult (def->GetAUID (&classid));
			  if (EqualGUID (&classid, &kClassAUID_NewFill))
				{
				  // Found it the hard way.
				  found = true;
				  break;
				}
			}
		  // make sure we found it the hard way.
		  checkExpression(found == kAAFTrue, AAFRESULT_TEST_FAILED);

		  // Get the 'odor' property from our new fill clip.  Make
		  // sure it is set to the value we think it should be
		  // ('42').
		  //
		  // First get the property def from the class.
		  IAAFPropertyDefSP pPropDef;
		  checkResult (pClassFromObj->LookupPropertyDef
					   (kPropAUID_NewFill_Odor,
						&pPropDef));
		  //
		  // Get the property value from the object
		  IAAFPropertyValueSP pPropVal;
		  checkResult (pObj->GetPropertyValue (pPropDef, &pPropVal));
		  // 
		  // We know the property is int32; get the int32 type def
		  IAAFTypeDefSP ptd;
		  checkResult (pDictionary->LookupTypeDef
					   (kAAFTypeID_UInt32,
						&ptd));
		  IAAFTypeDefIntSP pTDUint32;
		  checkResult(ptd->QueryInterface(IID_IAAFTypeDefInt,
										  (void **) &pTDUint32));
		  assert (pTDUint32);
		  //
		  // Ask the typedef to interpret this property value for us.
		  aafUInt32 odorValue = 0;
		  checkResult (pTDUint32->GetInteger
					   (pPropVal,
						(aafMemPtr_t) &odorValue,
						sizeof (odorValue)));
		  //
		  // make sure it's what we expect.
		  assert (42 == odorValue);
		}

	  checkResult (LookupDefs (pDictionary));


	//Test the Lookup KLV and Tagged methods
	IAAFKLVDataDefinition *pKLVLook = NULL;
	IAAFTaggedValueDefinition *pTAGDefLook = NULL;
	IAAFDictionary2 *pDic2 = NULL;	
	IAAFDefObject *pKLVDataDefObj = NULL;
	IAAFDefObject *pTaggedValueDefObj = NULL;
	aafUID_t auid;

	checkResult( pDictionary->QueryInterface( IID_IAAFDictionary2, reinterpret_cast<void**>(&pDic2) ) );
	assert(pDic2);
	
	//test LookUpKLV()
	if(pDic2->LookupKLVDataDef(KLVDef_TestData, &pKLVLook) != AAFRESULT_SUCCESS)
		checkResult(AAFRESULT_TEST_FAILED);

	checkResult( pKLVLook->QueryInterface( IID_IAAFDefObject, reinterpret_cast<void**>(&pKLVDataDefObj) ) );
	assert(pKLVDataDefObj);
	
	//ensure the KLVLook auid is equal to KLVDef_TestData auid
	checkResult(pKLVDataDefObj->GetAUID(&auid));

	if(auid != KLVDef_TestData)
		checkResult(AAFRESULT_TEST_FAILED);

	//test LookUpTagged()
	if(pDic2->LookupTaggedValueDef(TAGDef_TestData, &pTAGDefLook) != AAFRESULT_SUCCESS)
		checkResult(AAFRESULT_TEST_FAILED);

	checkResult( pTAGDefLook->QueryInterface( IID_IAAFDefObject, reinterpret_cast<void**>(&pTaggedValueDefObj) ) );
	assert(pTaggedValueDefObj);
	
	//ensure the TAGDefLook auid is equal to TAGDef_TestData auid
	checkResult(pTaggedValueDefObj->GetAUID(&auid));

	if(auid != TAGDef_TestData)
		checkResult(AAFRESULT_TEST_FAILED);


	//cleanup	
	pDic2->Release();
	pDic2 = NULL;
	pKLVLook->Release();
	pKLVLook = NULL;
	pTAGDefLook->Release();
	pTAGDefLook = NULL;
	pKLVDataDefObj->Release();
	pKLVDataDefObj = NULL;
	pTaggedValueDefObj->Release();
	pTaggedValueDefObj = NULL;

	}

  catch (HRESULT& rResult)
	{
	  hr = rResult;
	}
	
  // Cleanup and return.
  if (pFile)
	{
	  pFile->Close();
	}
  return 	hr;
}
Esempio n. 8
0
static HRESULT CreateAAFFile(
    aafWChar * pFileName,
    aafUID_constref fileKind,
    testRawStorageType_t rawStorageType,
    aafProductIdentification_constref productID)
{
  IAAFFileSP       pFile;
  IAAFHeaderSP     pHeader;
  IAAFDictionarySP pDictionary;
  IAAFMobSP        pMob;
  IAAFTimelineMobSlotSP    pMobSlot;
  IAAFSequenceSP   pSequence;
  IAAFSegmentSP    pSegment;
  IAAFComponentSP  pComponent;
  int              i;
  HRESULT          hr = S_OK;
	
	
  try
	{  
	  // Remove the previous test file if any.
	  RemoveTestFile(pFileName);
		
	  // Create the AAF file
	  checkResult(CreateTestFile( pFileName, fileKind, rawStorageType, productID, &pFile ));

	  // Get the AAF file header.
	  checkResult(pFile->GetHeader(&pHeader));

	  // Get the AAF Dictionary so that we can create valid AAF objects.
	  checkResult(pHeader->GetDictionary(&pDictionary));
		
	  // Create a new class, and register it in the dictionary.
	  RegisterNewClass (pDictionary);
	  CAAFBuiltinDefs defs (pDictionary);

	  // Create a Composition Mob
	  checkResult(defs.cdCompositionMob()->
				  CreateInstance(IID_IAAFMob, 
								 (IUnknown **)&pMob));
		
	  checkResult(pMob->SetMobID(TEST_MobID));
	  checkResult(pMob->SetName(L"AAFDictionaryTest"));
		
	  // Add mob slot w/ Sequence
	  checkResult(defs.cdSequence()->
				  CreateInstance(IID_IAAFSequence, 
								 (IUnknown **)&pSequence));		

	  checkResult(pSequence->Initialize(defs.ddkAAFPicture()));
		
	  //
	  //	Add some segments.  Need to test failure conditions
	  //	(i.e. starting/ending w/ transition, two trans back
	  //	to back).
	  //
	  for(i = 0; i < kNumComponents; i++)
		{
		  aafLength_t		len = 10;
			
		  // For the first component, make it our extended filler.
		  if(i == 0)
			{
			  IAAFClassDefSP pNewFillClassDef;
			  checkResult(pDictionary->LookupClassDef(kClassAUID_NewFill,
													  &pNewFillClassDef));
			  checkResult
				(pNewFillClassDef->CreateInstance(IID_IAAFComponent, 
												  (IUnknown**)&pComponent));
			  checkResult(pComponent->SetDataDef(defs.ddkAAFPictureWithMatte()));
			}
		  else
			{
			  checkResult
				(defs.cdFiller()->CreateInstance(IID_IAAFComponent, 
												 (IUnknown**)&pComponent));

			  checkResult(pComponent->SetDataDef(defs.ddkAAFPicture()));
			}

		  checkResult(pComponent->SetLength(len));
		  checkResult(pSequence->AppendComponent(pComponent));
			
		  // For our first component, set the 'odor' value.  Must be
		  // done after the component has been inserted in sequence.
		  if (i == 0)
			{
			  // Set the odor value.
			  //
			  // 1) Get type def for uint32
			  IAAFTypeDefSP ptd;
			  checkResult (pDictionary->LookupTypeDef (kAAFTypeID_UInt32,
													   &ptd));
			  assert (ptd);
			  IAAFTypeDefIntSP pTDUint32;
			  checkResult(ptd->QueryInterface (IID_IAAFTypeDefInt,
											   (void **)&pTDUint32));
			  assert (pTDUint32);

			  // 2) Create a property value for the odor property, and
			  //    set it to 42.
			  IAAFPropertyValueSP pVal;
			  const aafUInt32 odorValue = 42;
			  checkResult (pTDUint32->CreateValue ((aafMemPtr_t) &odorValue,
												   sizeof (odorValue),
												   &pVal));

			  // 3) Look up the property def for the odor property in
			  //    the new fill class.
			  IAAFClassDefSP pNewFillClass;
			  checkResult (pDictionary->LookupClassDef (kClassAUID_NewFill,
														&pNewFillClass));
			  IAAFPropertyDefSP pPropDef;
			  checkResult (pNewFillClass->LookupPropertyDef (kPropAUID_NewFill_Odor,
															 &pPropDef));

			  // 4) Get IAAFObject interface for new fill object, and
			  //    set the odor property.
			  IAAFObjectSP pObj;
			  checkResult(pComponent->QueryInterface (IID_IAAFObject,
													  (void **)&pObj));
			  checkResult (pObj->SetPropertyValue (pPropDef, pVal));
			}
		}

	  checkResult(pSequence->QueryInterface (IID_IAAFSegment, (void **)&pSegment));
		
	  aafRational_t editRate = { 0, 1};
	  checkResult(pMob->AppendNewTimelineSlot(editRate,
											  pSegment,
											  1,
											  L"AAF Test Sequence",
											  0,
											  &pMobSlot));
		
	  // Add the master mob to the file and cleanup
	  pHeader->AddMob(pMob);

	  checkResult (RegisterDefs (pDictionary));

	  testKLVDataDefinitions(pDictionary, pMob);
	  testTaggedDefinitions(pDictionary, pMob);

	}
  catch (HRESULT& rResult)
	{
	  hr = rResult;
	}
	
  // Cleanup and return
  if (pFile)
	{
	  pFile->Save();
	  pFile->Close();
	}
  return hr;
}
Esempio n. 9
0
static HRESULT TestTypeDef (
    testMode_t mode,
    aafUID_constref fileKind,
    testRawStorageType_t rawStorageType,
    aafProductIdentification_constref productID)
{
  HRESULT hr = E_FAIL;

  GenerateTestFileName( productID.productName, fileKind, fileNameBufLen, testFileName );

  IAAFFileSP pFile;
  if(mode == kAAFUnitTestReadWrite)
  {
 	 RemoveTestFile (testFileName);
  	hr = CreateTestFile( testFileName, fileKind, rawStorageType, productID, &pFile );
  }
  else
  {
  	hr = AAFFileOpenExistingRead(testFileName, 0, &pFile);
  }
  
  if (! SUCCEEDED (hr)) return hr;

  IAAFHeaderSP pHeader;
  hr = pFile->GetHeader (&pHeader);
  if (! SUCCEEDED (hr)) return hr;
  assert (pHeader);

  IAAFDictionarySP pDict;
  hr = pHeader->GetDictionary (&pDict);
  if (! SUCCEEDED (hr)) return hr;
  assert (pDict);

  CAAFBuiltinDefs defs (pDict);

  // Let's try to do something interesting with a type definition
  IAAFTypeDefIntSP pTypeDefInt;
  hr = defs.tdInt32()->QueryInterface (IID_IAAFTypeDefInt, (void **) &pTypeDefInt);
  if (! SUCCEEDED (hr)) return hr;
  assert (pTypeDefInt);

  IAAFTypeDefSP pTypeDef;
  hr = pTypeDefInt->QueryInterface(IID_IAAFTypeDef, (void **)&pTypeDef);
  if (! SUCCEEDED (hr)) return hr;
  assert (pTypeDef);

  //
  // Test GetTypeCategory() method
  //

  // first, test error conditions
  hr = pTypeDef->GetTypeCategory(NULL);
  if (AAFRESULT_NULL_PARAM != hr)
	return AAFRESULT_TEST_FAILED;

  // now, test for valid value.  Our type def is integral.
  eAAFTypeCategory_t typeCat = kAAFTypeCatUnknown;
  hr = pTypeDef->GetTypeCategory(&typeCat);
  if (! SUCCEEDED (hr)) return hr;
  if (kAAFTypeCatInt != typeCat)
	return AAFRESULT_TEST_FAILED;

  // Test for RawAccessType().  It should be array of unsigned chars.
  IAAFTypeDefSP pRawType;
  hr = pTypeDef->RawAccessType (&pRawType);
  if (! SUCCEEDED (hr)) return hr;

  IUnknownSP    pUnkRawType;
  hr = pRawType->QueryInterface(IID_IUnknown, (void **)&pUnkRawType);
  if (! SUCCEEDED (hr)) return hr;

  IAAFTypeDefSP pUInt8ArrayType;
  hr = pDict->LookupTypeDef (kAAFTypeID_UInt8Array, &pUInt8ArrayType);
  if (! SUCCEEDED (hr)) return hr;

  IUnknownSP    pUnkUInt8Array;
  hr = pUInt8ArrayType->QueryInterface(IID_IUnknown, (void **)&pUnkUInt8Array);
  if (! SUCCEEDED (hr)) return hr;

  if (pUnkUInt8Array != pUnkRawType)
	return AAFRESULT_TEST_FAILED;


  // that's all we can test for.  Clean up.
  if(mode == kAAFUnitTestReadWrite)
  {
  	hr = pFile->Save();
 	 if (! SUCCEEDED (hr)) return hr;
 }
  hr = pFile->Close();
  if (! SUCCEEDED (hr)) return hr;

  return AAFRESULT_SUCCESS;
}
Esempio n. 10
0
// Create the test file.
void CAAFTypeDefWeakObjRef_create (
    aafCharacter_constptr pFileName,
    aafUID_constref fileKind,
    testRawStorageType_t rawStorageType,
    aafProductIdentification_constref productID)
{
  // Remove the previous test file is one exists
  RemoveTestFile (pFileName);

  // Create the file.
  IAAFFileSP pFile;
  checkResult (CreateTestFile( pFileName, fileKind, rawStorageType, productID, &pFile ));
  
  try
  {
    IAAFHeaderSP pHeader;
    checkResult (pFile->GetHeader (&pHeader));
    
    aafProductVersion_t toolkitVersion;
    checkResult(GetAAFVersions(pHeader, &toolkitVersion, NULL));
    bool weakReferencesSupported = WeakReferencesSupported(toolkitVersion);
    
    IAAFDictionarySP pDictionary;
    checkResult (pHeader->GetDictionary (&pDictionary));
    
    CAAFBuiltinDefs defs (pDictionary);
   
    if (weakReferencesSupported)
    {
      // Create a Weak reference to a type definition.
      IAAFTypeDefWeakObjRefSP pWeakObjRef;
      checkResult(pDictionary->CreateMetaInstance(AUID_AAFTypeDefWeakObjRef,
                                                  IID_IAAFTypeDefWeakObjRef,
                                                  (IUnknown **)&pWeakObjRef));
      
      // Find the class definition for all type definitions.
      IAAFClassDefSP pClassDef;
      checkResult(pDictionary->LookupClassDef(AUID_AAFTypeDef, &pClassDef));
      

  	  aafUID_t targetSet[2];
      targetSet[0] = kAAFPropID_Root_MetaDictionary;
      targetSet[1] = kAAFPropID_MetaDictionary_TypeDefinitions;
      checkResult(pWeakObjRef->Initialize(kAAFTypeID_TestWeakReferenceToType,
                                          pClassDef,
                                          kMyWeakReferenceToTypeDefinitionName,
                                          sizeof(targetSet)/sizeof(aafUID_t),
                                          targetSet));

      // Validate that we make the correct "type" by inspecting the type category.
      IAAFTypeDefSP pTypeDef;
      checkResult(pWeakObjRef->QueryInterface(IID_IAAFTypeDef, (void **)&pTypeDef));

      eAAFTypeCategory_t category;
      checkResult(pTypeDef->GetTypeCategory(&category));
      checkExpression(kAAFTypeCatWeakObjRef == category, AAFRESULT_TEST_FAILED);


    	// Add the new type to the dictionary.
    	checkResult(pDictionary->RegisterTypeDef(pTypeDef));
    	
    	
    	// Now add a new optional weak reference property to an existing class.
    	IAAFClassDefSP pFillerClass;
      IAAFPropertyDefSP pWeakRefPropertyDef;  	
      checkResult(pDictionary->LookupClassDef(AUID_AAFComponent, &pFillerClass));   
      checkResult(pFillerClass->RegisterOptionalPropertyDef(
        kAAFPropID_TestWeakReferenceToType,
        kMyWeakReferenceToTypeDefinitionPropertyName,
        pTypeDef,
        &pWeakRefPropertyDef));      
    }
  

#ifndef NO_REFERENCE_TO_MOB_TEST
    if (weakReferencesSupported)
    {
      // Create a Weak reference to a mob.
      IAAFTypeDefWeakObjRefSP pWeakObjRef;
      checkResult(pDictionary->CreateMetaInstance(AUID_AAFTypeDefWeakObjRef,
                                                  IID_IAAFTypeDefWeakObjRef,
                                                  (IUnknown **)&pWeakObjRef));

      // Find the class definition for all mobs.
      IAAFClassDefSP pClassDef;
      checkResult(pDictionary->LookupClassDef(AUID_AAFMob, &pClassDef));


      aafUID_t targetSet[3];
      targetSet[0] = kAAFPropID_Root_Header;
      targetSet[1] = kAAFPropID_Header_Content;
      targetSet[2] = kAAFPropID_ContentStorage_Mobs;
      checkResult(pWeakObjRef->Initialize(kAAFTypeID_TestWeakReferenceToMob,
                                          pClassDef,
                                          kMyWeakReferenceToMobName,
                                          sizeof(targetSet)/sizeof(aafUID_t),
                                          targetSet));

      // Validate that we make the correct "type" by inspecting the type category.
      IAAFTypeDefSP pTypeDef;
      checkResult(pWeakObjRef->QueryInterface(IID_IAAFTypeDef, (void **)&pTypeDef));

      eAAFTypeCategory_t category;
      checkResult(pTypeDef->GetTypeCategory(&category));
      checkExpression(kAAFTypeCatWeakObjRef == category, AAFRESULT_TEST_FAILED);


      // Add the new type to the dictionary.
      checkResult(pDictionary->RegisterTypeDef(pTypeDef));


      // Now add a new optional weak reference property to an existing class.
      IAAFClassDefSP pFillerClass;
      IAAFPropertyDefSP pWeakRefPropertyDef;
      checkResult(pDictionary->LookupClassDef(AUID_AAFComponent, &pFillerClass));
      checkResult(pFillerClass->RegisterOptionalPropertyDef(
        kAAFPropID_TestWeakReferenceToMob,
        kMyWeakReferenceToMobPropertyName,
        pTypeDef,
        &pWeakRefPropertyDef));
    }
#endif
  


  
    //
	  // Create a Composition Mob
	  //
	  IAAFMobSP pMob;
	  checkResult(defs.cdCompositionMob()->CreateInstance(IID_IAAFMob, (IUnknown **)&pMob));
	  checkResult(pMob->SetMobID(TEST_MobID));
	  checkResult(pMob->SetName(L"TestCompMob"));
	  
	  //
	  // Create a sequence to hold our test fillers components.
	  //
	  IAAFSequenceSP pSequence;
	  checkResult (defs.cdSequence()->CreateInstance(IID_IAAFSequence, (IUnknown **)&pSequence));
	  checkResult (pSequence->Initialize (defs.ddkAAFPicture()));

	  
	  IAAFFillerSP pFiller1;
	  checkResult (defs.cdFiller()->CreateInstance(IID_IAAFFiller, (IUnknown **)&pFiller1));
	  checkResult (pFiller1->Initialize (defs.ddkAAFPicture(), 16));
	
		IAAFFillerSP pFiller2;
	  checkResult (defs.cdFiller()->CreateInstance(IID_IAAFFiller, (IUnknown **)&pFiller2));
	  checkResult (pFiller2->Initialize (defs.ddkAAFPicture(), 32));


    if (weakReferencesSupported)
    {
      // Try adding a weak reference before filler is attached to the file.
      CreateWeakReference(pFiller1, defs.tdInt64());
      CheckWeakReference(pFiller1, defs.tdInt64());
      
      ChangeWeakReference(pFiller1, defs.tdString());
      CreateWeakReference(pFiller2, defs.tdInt32()); 	
    }


    //
    // Add the initialized fillers to the sequence.
    //
    IAAFComponentSP pComp1;
  	checkResult(pFiller1->QueryInterface(IID_IAAFComponent, (void **)&pComp1));
  	checkResult(pSequence->AppendComponent(pComp1));

    IAAFComponentSP pComp2;
  	checkResult(pFiller2->QueryInterface(IID_IAAFComponent, (void **)&pComp2));	
  	checkResult(pSequence->AppendComponent(pComp2));
  	
  	//
  	// Append the sequence as the segment in a new timeline mob slot.
  	//
  	IAAFSegmentSP pSegment;
  	checkResult(pSequence->QueryInterface(IID_IAAFSegment, (void **)&pSegment));
   	aafRational_t  editRate = {30000, 1001};
   	aafCharacter_constptr pSlotName = L"Slot 1";
   	aafPosition_t  origin = 0;
   	IAAFTimelineMobSlotSP pNewSlot;
   	checkResult(pMob->AppendNewTimelineSlot(editRate, pSegment, TEST_SlotID, pSlotName, origin, &pNewSlot));

    //
    // Add to the set of mobs in the file.
    //
    checkResult(pHeader->AddMob(pMob));

#ifndef NO_REFERENCE_TO_MOB_TEST
    if (weakReferencesSupported)
    {
      // The referenced object needs to be attached to the file.
      CreateWeakReference(pFiller1, pMob);
      CheckWeakReference(pFiller1, pMob);
    }
#endif
//    if (weakReferencesSupported)
//    {
//      // Try adding a weak reference after filler is attached to the file.
//      CreateWeakReference(pFiller2, defs.tdInt32());  	
//    }

    // Verify the data before the save.
    CAAFTypeDefWeakObjRef_verify (pHeader);

    checkResult(pFile->Save());
    checkResult(pFile->Close());
  }
  catch (HRESULT& rhr)
  {
    if (pFile) // only save & close the file if it was actually opened
    {
      pFile->Save();  // This may not be safe???
      pFile->Close();
    }
    throw rhr;
  }
  catch (...)
  {
    if (pFile) // only close the file if it was actually opened
      pFile->Close();  
    throw;
  }
}