void KoPathPointInsertCommand::undo()
{
QUndoCommand::undo();
for (int i = 0; i < m_pointDataList.size(); ++i) {
const KoPathPointData &pdBefore = m_pointDataList.at(i);
KoPathShape * pathShape = pdBefore.pathShape;
KoPathPointIndex piAfter = pdBefore.pointIndex;
++piAfter.second;
KoPathPoint * before = pathShape->pointByIndex(pdBefore.pointIndex);
m_points[i] = pathShape->removePoint(piAfter);
if (m_points[i]->properties() & KoPathPoint::CloseSubpath) {
piAfter.second = 0;
}
KoPathPoint * after = pathShape->pointByIndex(piAfter);
if (before->activeControlPoint2()) {
QPointF controlPoint2 = before->controlPoint2();
qSwap(controlPoint2, m_controlPoints[i].first);
before->setControlPoint2(controlPoint2);
}
if (after->activeControlPoint1()) {
QPointF controlPoint1 = after->controlPoint1();
qSwap(controlPoint1, m_controlPoints[i].second);
after->setControlPoint1(controlPoint1);
}
pathShape->update();
}
m_deletePoints = true;
}
QList<KoSubpath *> KarbonSimplifyPath::split( const KoPathShape &path )
{
QList<KoSubpath *> res;
KoSubpath *subpath = new KoSubpath;
res.append( subpath );
for ( int i = 0; i < path.pointCount(); ++i )
{
KoPathPoint *p = path.pointByIndex( KoPathPointIndex(0, i) );
// if the path separates two subpaths
// (if it isn't smooth nor the first or last point)
if ( i != 0 && i != path.pointCount()-1 )
{
KoPathPoint *prev = path.pointByIndex( KoPathPointIndex(0, i-1) );
KoPathPoint *next = path.pointByIndex( KoPathPointIndex(0, i+1) );
if ( ! p->isSmooth(prev, next) )
{
// create a new subpath
subpath->append( new KoPathPoint(*p) );
subpath = new KoSubpath;
res.append( subpath );
}
}
subpath->append( new KoPathPoint(*p) );
}
return res;
}
void KoPathPointTypeCommand::undoChanges(const QList<PointData> &data)
{
QList<PointData>::const_iterator it(data.begin());
for (; it != data.end(); ++it) {
KoPathShape *pathShape = it->m_pointData.pathShape;
KoPathPoint *point = pathShape->pointByIndex(it->m_pointData.pointIndex);
point->setProperties(it->m_oldProperties);
if (it->m_hadControlPoint1)
point->setControlPoint1(pathShape->documentToShape(it->m_oldControlPoint1));
else
point->removeControlPoint1();
if (it->m_hadControlPoint2)
point->setControlPoint2(pathShape->documentToShape(it->m_oldControlPoint2));
else
point->removeControlPoint2();
}
}
KoPathControlPointMoveCommand::KoPathControlPointMoveCommand(
const KoPathPointData &pointData,
const QPointF &offset,
KoPathPoint::PointType pointType,
KUndo2Command *parent)
: KUndo2Command(parent)
, m_pointData(pointData)
, m_pointType(pointType)
{
Q_ASSERT(offset.x() < 1e14 && offset.y() < 1e14);
KoPathShape * pathShape = m_pointData.pathShape;
KoPathPoint * point = pathShape->pointByIndex(m_pointData.pointIndex);
if (point) {
m_offset = point->parent()->documentToShape(offset) - point->parent()->documentToShape(QPointF(0, 0));
}
setText(i18nc("(qtundo-format)", "Move control point"));
}
void KoPathControlPointMoveCommand::redo()
{
KUndo2Command::redo();
KoPathShape * pathShape = m_pointData.pathShape;
KoPathPoint * point = pathShape->pointByIndex(m_pointData.pointIndex);
if (point) {
pathShape->update();
if (m_pointType == KoPathPoint::ControlPoint1) {
point->setControlPoint1(point->controlPoint1() + m_offset);
if (point->properties() & KoPathPoint::IsSymmetric) {
// set the other control point so that it lies on the line between the moved
// control point and the point, with the same distance to the point as the moved point
point->setControlPoint2(2.0 * point->point() - point->controlPoint1());
} else if (point->properties() & KoPathPoint::IsSmooth) {
// move the other control point so that it lies on the line through point and control point
// keeping its distance to the point
QPointF direction = point->point() - point->controlPoint1();
direction /= sqrt(direction.x() * direction.x() + direction.y() * direction.y());
QPointF distance = point->point() - point->controlPoint2();
qreal length = sqrt(distance.x() * distance.x() + distance.y() * distance.y());
point->setControlPoint2(point->point() + length * direction);
}
} else if (m_pointType == KoPathPoint::ControlPoint2) {
point->setControlPoint2(point->controlPoint2() + m_offset);
if (point->properties() & KoPathPoint::IsSymmetric) {
// set the other control point so that it lies on the line between the moved
// control point and the point, with the same distance to the point as the moved point
point->setControlPoint1(2.0 * point->point() - point->controlPoint2());
} else if (point->properties() & KoPathPoint::IsSmooth) {
// move the other control point so that it lies on the line through point and control point
// keeping its distance to the point
QPointF direction = point->point() - point->controlPoint2();
direction /= sqrt(direction.x() * direction.x() + direction.y() * direction.y());
QPointF distance = point->point() - point->controlPoint1();
qreal length = sqrt(distance.x() * distance.x() + distance.y() * distance.y());
point->setControlPoint1(point->point() + length * direction);
}
}
pathShape->normalize();
pathShape->update();
}
}
/*
* The algorithm to break a multiple open or closed subpaths is:
* Subpath is closed
* - open behind the last point in the subpath
* - go on like as described in Not closed
* Not closed
* - break from the back of the subpath
*/
KoPathBreakAtPointCommand::KoPathBreakAtPointCommand(const QList<KoPathPointData> & pointDataList, KUndo2Command *parent)
: KUndo2Command(parent)
, m_deletePoints(true)
{
QList<KoPathPointData> sortedPointDataList(pointDataList);
qSort(sortedPointDataList);
setText(i18nc("(qtundo-format)", "Break subpath at points"));
QList<KoPathPointData>::const_iterator it(sortedPointDataList.constBegin());
for (; it != sortedPointDataList.constEnd(); ++it) {
KoPathShape * pathShape = it->pathShape;
KoPathPoint * point = pathShape->pointByIndex(it->pointIndex);
if(! point)
continue;
// check if subpath is closed and the point is start or end point of the subpath
if(! pathShape->isClosedSubpath(it->pointIndex.first)) {
if(it->pointIndex.second == 0
|| it->pointIndex.second == pathShape->subpathPointCount(it->pointIndex.first)) {
continue;
}
}
m_pointDataList.append(*it);
m_points.push_back(new KoPathPoint(*point));
m_closedIndex.push_back(KoPathPointIndex(-1, 0));
}
KoPathPointData last(0, KoPathPointIndex(-1, -1));
for (int i = m_pointDataList.size() - 1; i >= 0; --i) {
const KoPathPointData ¤t = m_pointDataList.at(i);
if (last.pathShape != current.pathShape || last.pointIndex.first != current.pointIndex.first) {
last = current;
if (current.pathShape->isClosedSubpath(current.pointIndex.first)) {
// the break will happen before the inserted point so we have to increment by 1
m_closedIndex[i] = current.pointIndex;
++m_closedIndex[i].second;
}
}
}
}
void KoSubpathJoinCommand::redo()
{
KUndo2Command::redo();
KoPathShape * pathShape = m_pointData1.pathShape;
bool closeSubpath = m_pointData1.pointIndex.first == m_pointData2.pointIndex.first;
KoPathPoint * point1 = pathShape->pointByIndex(m_pointData1.pointIndex);
KoPathPoint * point2 = pathShape->pointByIndex(m_pointData2.pointIndex);
// if the endpoint is has a control point create a contol point for the new segment to be
// at the symetric position to the exiting one
if (m_reverse & ReverseFirst || closeSubpath) {
if (point1->activeControlPoint2())
point1->setControlPoint1(2.0 * point1->point() - point1->controlPoint2());
} else if (point1->activeControlPoint1())
point1->setControlPoint2(2.0 * point1->point() - point1->controlPoint1());
if (m_reverse & ReverseSecond || closeSubpath) {
if (point2->activeControlPoint1())
point2->setControlPoint2(2.0 * point2->point() - point2->controlPoint1());
} else if (point2->activeControlPoint2())
point2->setControlPoint1(2.0 * point2->point() - point2->controlPoint2());
if (closeSubpath) {
pathShape->closeSubpath(m_pointData1.pointIndex);
} else {
if (m_reverse & ReverseFirst) {
pathShape->reverseSubpath(m_pointData1.pointIndex.first);
}
if (m_reverse & ReverseSecond) {
pathShape->reverseSubpath(m_pointData2.pointIndex.first);
}
pathShape->moveSubpath(m_pointData2.pointIndex.first, m_pointData1.pointIndex.first + 1);
m_splitIndex = m_pointData1.pointIndex;
m_splitIndex.second = pathShape->subpathPointCount(m_pointData1.pointIndex.first) - 1;
pathShape->join(m_pointData1.pointIndex.first);
}
pathShape->normalize();
pathShape->update();
}
KoSubpathJoinCommand::KoSubpathJoinCommand(const KoPathPointData &pointData1, const KoPathPointData &pointData2, KUndo2Command *parent)
: KUndo2Command(parent)
, m_pointData1(pointData1)
, m_pointData2(pointData2)
, m_splitIndex(KoPathPointIndex(-1, -1))
, m_oldProperties1(KoPathPoint::Normal)
, m_oldProperties2(KoPathPoint::Normal)
, m_reverse(0)
{
Q_ASSERT(m_pointData1.pathShape == m_pointData2.pathShape);
KoPathShape * pathShape = m_pointData1.pathShape;
Q_ASSERT(!pathShape->isClosedSubpath(m_pointData1.pointIndex.first));
Q_ASSERT(m_pointData1.pointIndex.second == 0 ||
m_pointData1.pointIndex.second == pathShape->subpathPointCount(m_pointData1.pointIndex.first) - 1);
Q_ASSERT(!pathShape->isClosedSubpath(m_pointData2.pointIndex.first));
Q_ASSERT(m_pointData2.pointIndex.second == 0 ||
m_pointData2.pointIndex.second == pathShape->subpathPointCount(m_pointData2.pointIndex.first) - 1);
//TODO check that points are not the same
if (m_pointData2 < m_pointData1)
qSwap(m_pointData1, m_pointData2);
if (m_pointData1.pointIndex.first != m_pointData2.pointIndex.first) {
if (m_pointData1.pointIndex.second == 0 && pathShape->subpathPointCount(m_pointData1.pointIndex.first) > 1)
m_reverse |= ReverseFirst;
if (m_pointData2.pointIndex.second != 0)
m_reverse |= ReverseSecond;
setText(kundo2_i18n("Close subpath"));
} else {
setText(kundo2_i18n("Join subpaths"));
}
KoPathPoint * point1 = pathShape->pointByIndex(m_pointData1.pointIndex);
KoPathPoint * point2 = pathShape->pointByIndex(m_pointData2.pointIndex);
m_oldControlPoint1 = QPointF(pathShape->shapeToDocument(m_reverse & 1 ? point1->controlPoint1() : point1->controlPoint2()));
m_oldControlPoint2 = QPointF(pathShape->shapeToDocument(m_reverse & 2 ? point2->controlPoint1() : point2->controlPoint2()));
m_oldProperties1 = point1->properties();
m_oldProperties2 = point2->properties();
}
void KoSubpathJoinCommand::undo()
{
KUndo2Command::undo();
KoPathShape * pathShape = m_pointData1.pathShape;
pathShape->update();
if (m_pointData1.pointIndex.first == m_pointData2.pointIndex.first) {
pathShape->openSubpath(m_pointData1.pointIndex);
} else {
pathShape->breakAfter(m_splitIndex);
pathShape->moveSubpath(m_pointData1.pointIndex.first + 1, m_pointData2.pointIndex.first);
if (m_reverse & ReverseSecond) {
pathShape->reverseSubpath(m_pointData2.pointIndex.first);
}
if (m_reverse & ReverseFirst) {
pathShape->reverseSubpath(m_pointData1.pointIndex.first);
}
}
KoPathPoint * point1 = pathShape->pointByIndex(m_pointData1.pointIndex);
KoPathPoint * point2 = pathShape->pointByIndex(m_pointData2.pointIndex);
// restore the old end points
if (m_reverse & ReverseFirst)
point1->setControlPoint1(pathShape->documentToShape(m_oldControlPoint1));
else
point1->setControlPoint2(pathShape->documentToShape(m_oldControlPoint1));
point1->setProperties(m_oldProperties1);
if (m_reverse & ReverseSecond)
point2->setControlPoint1(pathShape->documentToShape(m_oldControlPoint2));
else
point2->setControlPoint2(pathShape->documentToShape(m_oldControlPoint2));
point2->setProperties(m_oldProperties2);
pathShape->normalize();
pathShape->update();
}
void KoPathPointTypeCommand::redo()
{
KUndo2Command::redo();
repaint(false);
m_additionalPointData.clear();
QList<PointData>::iterator it(m_oldPointData.begin());
for (; it != m_oldPointData.end(); ++it) {
KoPathPoint *point = it->m_pointData.pathShape->pointByIndex(it->m_pointData.pointIndex);
KoPathPoint::PointProperties properties = point->properties();
switch (m_pointType) {
case Line: {
point->removeControlPoint1();
point->removeControlPoint2();
break;
}
case Curve: {
KoPathPointIndex pointIndex = it->m_pointData.pointIndex;
KoPathPointIndex prevIndex;
KoPathPointIndex nextIndex;
KoPathShape * path = it->m_pointData.pathShape;
// get previous path node
if (pointIndex.second > 0)
prevIndex = KoPathPointIndex(pointIndex.first, pointIndex.second - 1);
else if (pointIndex.second == 0 && path->isClosedSubpath(pointIndex.first))
prevIndex = KoPathPointIndex(pointIndex.first, path->subpathPointCount(pointIndex.first) - 1);
// get next node
if (pointIndex.second < path->subpathPointCount(pointIndex.first) - 1)
nextIndex = KoPathPointIndex(pointIndex.first, pointIndex.second + 1);
else if (pointIndex.second < path->subpathPointCount(pointIndex.first) - 1
&& path->isClosedSubpath(pointIndex.first))
nextIndex = KoPathPointIndex(pointIndex.first, 0);
KoPathPoint * prevPoint = path->pointByIndex(prevIndex);
KoPathPoint * nextPoint = path->pointByIndex(nextIndex);
if (prevPoint && ! point->activeControlPoint1() && appendPointData(KoPathPointData(path, prevIndex))) {
KoPathSegment cubic = KoPathSegment(prevPoint, point).toCubic();
if (prevPoint->activeControlPoint2()) {
prevPoint->setControlPoint2(cubic.first()->controlPoint2());
point->setControlPoint1(cubic.second()->controlPoint1());
} else
point->setControlPoint1(cubic.second()->controlPoint1());
}
if (nextPoint && ! point->activeControlPoint2() && appendPointData(KoPathPointData(path, nextIndex))) {
KoPathSegment cubic = KoPathSegment(point, nextPoint).toCubic();
if (nextPoint->activeControlPoint1()) {
point->setControlPoint2(cubic.first()->controlPoint2());
nextPoint->setControlPoint1(cubic.second()->controlPoint1());
} else
point->setControlPoint2(cubic.first()->controlPoint2());
}
break;
}
case Symmetric: {
properties &= ~KoPathPoint::IsSmooth;
properties |= KoPathPoint::IsSymmetric;
// calculate vector from node point to first control point and normalize it
QPointF directionC1 = point->controlPoint1() - point->point();
qreal dirLengthC1 = sqrt(directionC1.x() * directionC1.x() + directionC1.y() * directionC1.y());
directionC1 /= dirLengthC1;
// calculate vector from node point to second control point and normalize it
QPointF directionC2 = point->controlPoint2() - point->point();
qreal dirLengthC2 = sqrt(directionC2.x() * directionC2.x() + directionC2.y() * directionC2.y());
directionC2 /= dirLengthC2;
// calculate the average distance of the control points to the node point
qreal averageLength = 0.5 * (dirLengthC1 + dirLengthC2);
// compute position of the control points so that they lie on a line going through the node point
// the new distance of the control points is the average distance to the node point
point->setControlPoint1(point->point() + 0.5 * averageLength * (directionC1 - directionC2));
point->setControlPoint2(point->point() + 0.5 * averageLength * (directionC2 - directionC1));
}
break;
case Smooth: {
properties &= ~KoPathPoint::IsSymmetric;
properties |= KoPathPoint::IsSmooth;
// calculate vector from node point to first control point and normalize it
QPointF directionC1 = point->controlPoint1() - point->point();
qreal dirLengthC1 = sqrt(directionC1.x() * directionC1.x() + directionC1.y() * directionC1.y());
directionC1 /= dirLengthC1;
// calculate vector from node point to second control point and normalize it
QPointF directionC2 = point->controlPoint2() - point->point();
qreal dirLengthC2 = sqrt(directionC2.x() * directionC2.x() + directionC2.y() * directionC2.y());
directionC2 /= dirLengthC2;
// compute position of the control points so that they lie on a line going through the node point
// the new distance of the control points is the average distance to the node point
point->setControlPoint1(point->point() + 0.5 * dirLengthC1 * (directionC1 - directionC2));
point->setControlPoint2(point->point() + 0.5 * dirLengthC2 * (directionC2 - directionC1));
}
break;
case Corner:
default:
properties &= ~KoPathPoint::IsSymmetric;
properties &= ~KoPathPoint::IsSmooth;
break;
}
point->setProperties(properties);
}
repaint(true);
}