void FpuStackAllocator::pop_if_last_use(LIR_Op* op, LIR_Opr opr) {
assert(op->fpu_pop_count() == 0, "fpu_pop_count alredy set");
assert(tos_offset(opr) == 0, "can only pop stack top");
if (opr->is_last_use()) {
op->set_fpu_pop_count(1);
sim()->pop();
}
}
void FpuStackAllocator::handle_op2(LIR_Op2* op2) {
LIR_Opr left = op2->in_opr1();
if (!left->is_float_kind()) {
return;
}
if (left->is_xmm_register()) {
return;
}
LIR_Opr right = op2->in_opr2();
LIR_Opr res = op2->result_opr();
LIR_Opr new_left = left; // new operands relative to the actual fpu stack top
LIR_Opr new_right = right;
LIR_Opr new_res = res;
assert(!left->is_xmm_register() && !right->is_xmm_register() && !res->is_xmm_register(), "not for xmm registers");
switch (op2->code()) {
case lir_cmp:
case lir_cmp_fd2i:
case lir_ucmp_fd2i:
case lir_assert: {
assert(left->is_fpu_register(), "invalid LIR");
assert(right->is_fpu_register(), "invalid LIR");
// the left-hand side must be on top of stack.
// the right-hand side is never popped, even if is_last_use is set
insert_exchange(left);
new_left = to_fpu_stack_top(left);
new_right = to_fpu_stack(right);
pop_if_last_use(op2, left);
break;
}
case lir_mul_strictfp:
case lir_div_strictfp: {
assert(op2->tmp1_opr()->is_fpu_register(), "strict operations need temporary fpu stack slot");
insert_free_if_dead(op2->tmp1_opr());
assert(sim()->stack_size() <= 7, "at least one stack slot must be free");
// fall-through: continue with the normal handling of lir_mul and lir_div
}
case lir_add:
case lir_sub:
case lir_mul:
case lir_div: {
assert(left->is_fpu_register(), "must be");
assert(res->is_fpu_register(), "must be");
assert(left->is_equal(res), "must be");
// either the left-hand or the right-hand side must be on top of stack
// (if right is not a register, left must be on top)
if (!right->is_fpu_register()) {
insert_exchange(left);
new_left = to_fpu_stack_top(left);
} else {
// no exchange necessary if right is alredy on top of stack
if (tos_offset(right) == 0) {
new_left = to_fpu_stack(left);
new_right = to_fpu_stack_top(right);
} else {
insert_exchange(left);
new_left = to_fpu_stack_top(left);
new_right = to_fpu_stack(right);
}
if (right->is_last_use()) {
op2->set_fpu_pop_count(1);
if (tos_offset(right) == 0) {
sim()->pop();
} else {
// if left is on top of stack, the result is placed in the stack
// slot of right, so a renaming from right to res is necessary
assert(tos_offset(left) == 0, "must be");
sim()->pop();
do_rename(right, res);
}
}
}
new_res = to_fpu_stack(res);
break;
}
case lir_rem: {
assert(left->is_fpu_register(), "must be");
assert(right->is_fpu_register(), "must be");
assert(res->is_fpu_register(), "must be");
assert(left->is_equal(res), "must be");
// Must bring both operands to top of stack with following operand ordering:
// * fpu stack before rem: ... right left
// * fpu stack after rem: ... left
if (tos_offset(right) != 1) {
insert_exchange(right);
insert_exchange(1);
}
insert_exchange(left);
assert(tos_offset(right) == 1, "check");
assert(tos_offset(left) == 0, "check");
new_left = to_fpu_stack_top(left);
new_right = to_fpu_stack(right);
op2->set_fpu_pop_count(1);
sim()->pop();
do_rename(right, res);
new_res = to_fpu_stack_top(res);
break;
}
case lir_abs:
case lir_sqrt: {
// Right argument appears to be unused
assert(right->is_illegal(), "must be");
assert(left->is_fpu_register(), "must be");
assert(res->is_fpu_register(), "must be");
assert(left->is_last_use(), "old value gets destroyed");
insert_free_if_dead(res, left);
insert_exchange(left);
do_rename(left, res);
new_left = to_fpu_stack_top(res);
new_res = new_left;
op2->set_fpu_stack_size(sim()->stack_size());
break;
}
default: {
assert(false, "missed a fpu-operation");
}
}
op2->set_in_opr1(new_left);
op2->set_in_opr2(new_right);
op2->set_result_opr(new_res);
}
void FpuStackAllocator::handle_op1(LIR_Op1* op1) {
LIR_Opr in = op1->in_opr();
LIR_Opr res = op1->result_opr();
LIR_Opr new_in = in; // new operands relative to the actual fpu stack top
LIR_Opr new_res = res;
// Note: this switch is processed for all LIR_Op1, regardless if they have FPU-arguments,
// so checks for is_float_kind() are necessary inside the cases
switch (op1->code()) {
case lir_return: {
// FPU-Stack must only contain the (optional) fpu return value.
// All remaining dead values are popped from the stack
// If the input operand is a fpu-register, it is exchanged to the bottom of the stack
clear_fpu_stack(in);
if (in->is_fpu_register() && !in->is_xmm_register()) {
new_in = to_fpu_stack_top(in);
}
break;
}
case lir_move: {
if (in->is_fpu_register() && !in->is_xmm_register()) {
if (res->is_xmm_register()) {
// move from fpu register to xmm register (necessary for operations that
// are not available in the SSE instruction set)
insert_exchange(in);
new_in = to_fpu_stack_top(in);
pop_always(op1, in);
} else if (res->is_fpu_register() && !res->is_xmm_register()) {
// move from fpu-register to fpu-register:
// * input and result register equal:
// nothing to do
// * input register is last use:
// rename the input register to result register -> input register
// not present on fpu-stack afterwards
// * input register not last use:
// duplicate input register to result register to preserve input
//
// Note: The LIR-Assembler does not produce any code for fpu register moves,
// so input and result stack index must be equal
if (fpu_num(in) == fpu_num(res)) {
// nothing to do
} else if (in->is_last_use()) {
insert_free_if_dead(res);//, in);
do_rename(in, res);
} else {
insert_free_if_dead(res);
insert_copy(in, res);
}
new_in = to_fpu_stack(res);
new_res = new_in;
} else {
// move from fpu-register to memory
// input operand must be on top of stack
insert_exchange(in);
// create debug information here because afterwards the register may have been popped
compute_debug_information(op1);
new_in = to_fpu_stack_top(in);
pop_if_last_use(op1, in);
}
} else if (res->is_fpu_register() && !res->is_xmm_register()) {
// move from memory/constant to fpu register
// result is pushed on the stack
insert_free_if_dead(res);
// create debug information before register is pushed
compute_debug_information(op1);
do_push(res);
new_res = to_fpu_stack_top(res);
}
break;
}
case lir_neg: {
if (in->is_fpu_register() && !in->is_xmm_register()) {
assert(res->is_fpu_register() && !res->is_xmm_register(), "must be");
assert(in->is_last_use(), "old value gets destroyed");
insert_free_if_dead(res, in);
insert_exchange(in);
new_in = to_fpu_stack_top(in);
do_rename(in, res);
new_res = to_fpu_stack_top(res);
}
break;
}
case lir_convert: {
Bytecodes::Code bc = op1->as_OpConvert()->bytecode();
switch (bc) {
case Bytecodes::_d2f:
case Bytecodes::_f2d:
assert(res->is_fpu_register(), "must be");
assert(in->is_fpu_register(), "must be");
if (!in->is_xmm_register() && !res->is_xmm_register()) {
// this is quite the same as a move from fpu-register to fpu-register
// Note: input and result operands must have different types
if (fpu_num(in) == fpu_num(res)) {
// nothing to do
new_in = to_fpu_stack(in);
} else if (in->is_last_use()) {
insert_free_if_dead(res);//, in);
new_in = to_fpu_stack(in);
do_rename(in, res);
} else {
insert_free_if_dead(res);
insert_copy(in, res);
new_in = to_fpu_stack_top(in, true);
}
new_res = to_fpu_stack(res);
}
break;
case Bytecodes::_i2f:
case Bytecodes::_l2f:
case Bytecodes::_i2d:
case Bytecodes::_l2d:
assert(res->is_fpu_register(), "must be");
if (!res->is_xmm_register()) {
insert_free_if_dead(res);
do_push(res);
new_res = to_fpu_stack_top(res);
}
break;
case Bytecodes::_f2i:
case Bytecodes::_d2i:
assert(in->is_fpu_register(), "must be");
if (!in->is_xmm_register()) {
insert_exchange(in);
new_in = to_fpu_stack_top(in);
// TODO: update registes of stub
}
break;
case Bytecodes::_f2l:
case Bytecodes::_d2l:
assert(in->is_fpu_register(), "must be");
if (!in->is_xmm_register()) {
insert_exchange(in);
new_in = to_fpu_stack_top(in);
pop_always(op1, in);
}
break;
case Bytecodes::_i2l:
case Bytecodes::_l2i:
case Bytecodes::_i2b:
case Bytecodes::_i2c:
case Bytecodes::_i2s:
// no fpu operands
break;
default:
ShouldNotReachHere();
}
break;
}
case lir_roundfp: {
assert(in->is_fpu_register() && !in->is_xmm_register(), "input must be in register");
assert(res->is_stack(), "result must be on stack");
insert_exchange(in);
new_in = to_fpu_stack_top(in);
pop_if_last_use(op1, in);
break;
}
default: {
assert(!in->is_float_kind() && !res->is_float_kind(), "missed a fpu-operation");
}
}
op1->set_in_opr(new_in);
op1->set_result_opr(new_res);
}