void LandmarkSerializePlugin::initParameterSet(QAction *action, MeshModel &m, RichParameterSet &parlst)
{
QString fileName = m.fullName();
QFile file(fileName);
if (fileName.isEmpty() || !file.exists()) {
QMessageBox::warning(new QWidget(),"Error","You must import/save mesh file first!!");
return ;
} else {
// your method
QFileInfo const fileinfo(fileName);
QString extension = QString("lmk");
landmarkFilePath = fileinfo.absoluteFilePath () ;
landmarkFileName = fileinfo./*completeBaseName()*/fileName().append(".").append(extension);
}
switch(ID(action))
{
case FP_LANDMARK_SERIALIZE_IMPORT:
case FP_LANDMARK_SERIALIZE_EXPORT:
/*
parlst.addParam(new RichFloat("",0,"Directional Bias [0..1]","The balance between a uniform and a directionally biased set of lighting direction<br>:"
" - 0 means light came only uniformly from any direction<br>"
" - 1 means that all the light cames from the specified cone of directions <br>"
" - other values mix the two set of lighting directions "));
parlst.addParam(new RichInt ("loops",AMBOCC_DEFAULT_NUM_VIEWS,"Requested views", "Number of different views uniformly placed around the mesh. More views means better accuracy at the cost of increased calculation time"));
parlst.addParam(new RichPoint3f("coneDir",Point3f(0,1,0),"Lighting Direction", "Number of different views placed around the mesh. More views means better accuracy at the cost of increased calculation time"));
parlst.addParam(new RichFloat("coneAngle",30,"Cone amplitude", "Number of different views uniformly placed around the mesh. More views means better accuracy at the cost of increased calculation time"));
parlst.addParam(new RichBool("useGPU",AMBOCC_USEGPU_BY_DEFAULT,"Use GPU acceleration","In order to use GPU-Mode, your hardware must support FBOs, FP32 Textures and Shaders. Normally increases the performance by a factor of 4x-5x"));
parlst.addParam(new RichBool("useVBO",AMBOCC_USEVBO_BY_DEFAULT,"Use VBO if supported","By using VBO, Meshlab loads all the vertex structure in the VRam, greatly increasing rendering speed (for both CPU and GPU mode). Disable it if problem occurs"));
parlst.addParam(new RichInt ("depthTexSize",AMBOCC_DEFAULT_TEXTURE_SIZE,"Depth texture size(should be 2^n)", "Defines the depth texture size used to compute occlusion from each point of view. Higher values means better accuracy usually with low impact on performance"));
*/
parlst.addParam(new RichString ("landmarkfilename",landmarkFileName,"landmark file name"));
break;
default: break; // do not add any parameter for the other algos
}
}
bool IORenderman::save(const QString &formatName, const QString &fileName, MeshModel &m, const int mask,const RichParameterSet & par, vcg::CallBackPos *cb, QWidget *parent)
{
QString errorMsgFormat = "Error encountered while exportering file %1:\n%2";
//***get the filter parameters and create destination directory***
//MeshModel* m = md.mm();
this->cb = cb;
QTime tt; tt.start(); //time for debuging
qDebug("Starting apply filter");
if(templates.isEmpty()) //there aren't any template
{
this->errorMessage = "No template scene has been found in \"render_template\" directory";
return false;
}
QString templateName = templates.at(par.getEnum("scene")); //name of selected template
QFileInfo templateFile = QFileInfo(templatesDir.absolutePath() + QDir::separator() + templateName + QDir::separator() + templateName + ".rib");
//directory of current mesh
//QString meshDirString = m->pathName();
////creating of destination directory
//bool delRibFiles = !par.getBool("SaveScene");
////if SaveScene is true create in same mesh directory, otherwise in system temporary directry
//QDir destDir = QDir::temp(); //system temporary directry
//if(!delRibFiles) {
// //destDir = QDir(par.getSaveFileName("SceneName"));
// destDir = QDir(meshDirString);
//}
////create scene directory if don't exists
//if(!destDir.cd("scene")) {
// if(!destDir.mkdir("scene") || !destDir.cd("scene")) {
// this->errorMessage = "Creating scene directory at " + destDir.absolutePath();
// return false;
// }
//}
//create a new directory with template name
QDir destDir = QFileInfo(fileName).dir();
QString destDirString = templateName + "-" + QFileInfo(m.fullName()).completeBaseName();
QString newDir = destDirString;
int k = 0;
while(destDir.cd(newDir)) {
destDir.cdUp();
newDir = destDirString + "-" + QString::number(++k); //dir templateName+k
}
if(!destDir.mkdir(newDir) || !destDir.cd(newDir)) {
this->errorMessage = "Creating scene directory at " + destDir.absolutePath();
return false;
}
//destination diretory
destDirString = destDir.absolutePath();
//***Texture: take the list of texture mesh
QStringList textureListPath = QStringList();
for(size_t i=0; i<m.cm.textures.size(); i++) {
QString path = QString(m.cm.textures[i].c_str());
textureListPath << path;
}
//***read the template files and create the new scenes files
QStringList shaderDirs, textureDirs, proceduralDirs, imagesRendered;
qDebug("Starting reading cycle %i",tt.elapsed());
if(!makeScene(&m, &textureListPath, par, &templateFile, destDirString, &shaderDirs, &textureDirs, &proceduralDirs, &imagesRendered))
return false; //message already set
qDebug("Cycle ending at %i",tt.elapsed());
Log(GLLogStream::FILTER,"Successfully created scene");
//check if the final rib file will render any image
/*if(imagesRendered.size() == 0) {
this->errorMessage = "The template description hasn't a statement to render any image";
return false;
}*/
//***copy the rest of template files (shaders, textures, procedural..)
UtilitiesHQR::copyFiles(templateFile.dir(), destDir, textureDirs);
UtilitiesHQR::copyFiles(templateFile.dir(), destDir, shaderDirs);
UtilitiesHQR::copyFiles(templateFile.dir(), destDir, proceduralDirs);
qDebug("Copied needed file at %i",tt.elapsed());
//***convert the texture mesh to tiff format
if(!textureListPath.empty() && (m.cm.HasPerWedgeTexCoord() || m.cm.HasPerVertexTexCoord())) {
QString textureName = QFileInfo(textureListPath.first()).completeBaseName(); //just texture name
QFile srcFile(m.pathName() + QDir::separator() + textureListPath.first());
//destination directory it's the first readable/writable between textures directories
QString newImageDir = ".";
foreach(QString dir, textureDirs) {
if(dir!="." && destDir.cd(dir)) {
newImageDir = dir;
destDir.cdUp();
break;
}
}
qDebug("source texture directory: %s", qPrintable(srcFile.fileName()));
QString newTex = destDirString + QDir::separator() + newImageDir + QDir::separator() + textureName;
qDebug("destination texture directory: %s", qPrintable(newTex + ".tiff"));
if(srcFile.exists()) {
//convert image to tiff format (the one readable in aqsis)
QImage image;
image.load(srcFile.fileName());
image.save(newTex + ".tiff", "Tiff");
}
else {
this->errorMessage = "Not founded the texture file: " + srcFile.fileName();
return false; //the mesh has a texture not existing
}
}
bool FilterIsoParametrization::applyFilter(QAction *filter, MeshDocument& md, RichParameterSet & par, vcg::CallBackPos *cb)
{
MeshModel* m = md.mm(); //get current mesh from document
CMeshO *mesh=&m->cm;
switch(ID(filter))
{
case ISOP_PARAM :
{
int targetAbstractMinFaceNum = par.getInt("targetAbstractMinFaceNum");
int targetAbstractMaxFaceNum = par.getInt("targetAbstractMaxFaceNum");
int convergenceSpeed = par.getInt("convergenceSpeed");
int stopCriteria=par.getEnum("stopCriteria");
bool doublestep=par.getBool("DoubleStep");
IsoParametrizator Parametrizator;
m->updateDataMask(MeshModel::MM_FACEFACETOPO);
bool isTXTenabled=m->hasDataMask(MeshModel::MM_VERTTEXCOORD);
if (!isTXTenabled)
m->updateDataMask(MeshModel::MM_VERTTEXCOORD);
bool isVMarkenabled=m->hasDataMask(MeshModel::MM_VERTMARK);
if (!isVMarkenabled)
m->updateDataMask(MeshModel::MM_VERTMARK);
bool isFMarkenabled=m->hasDataMask(MeshModel::MM_FACEMARK);
if (!isFMarkenabled)
m->updateDataMask(MeshModel::MM_FACEMARK);
bool isVColorenabled=m->hasDataMask(MeshModel::MM_VERTCOLOR);
if (!isVColorenabled)
m->updateDataMask(MeshModel::MM_VERTCOLOR);
bool isFColorenabled=m->hasDataMask(MeshModel::MM_FACECOLOR);
if (!isFColorenabled)
m->updateDataMask(MeshModel::MM_FACECOLOR);
int tolerance = targetAbstractMaxFaceNum-targetAbstractMinFaceNum;
switch (stopCriteria)
{
case 0:Parametrizator.SetParameters(cb,targetAbstractMinFaceNum,tolerance,IsoParametrizator::SM_Euristic,convergenceSpeed);break;
case 1:Parametrizator.SetParameters(cb,targetAbstractMinFaceNum,tolerance,IsoParametrizator::SM_Corr,convergenceSpeed);break;
case 2:Parametrizator.SetParameters(cb,targetAbstractMinFaceNum,tolerance,IsoParametrizator::SM_Reg,convergenceSpeed);break;
case 3:Parametrizator.SetParameters(cb,targetAbstractMinFaceNum,tolerance,IsoParametrizator::SM_L2,convergenceSpeed);break;
default:Parametrizator.SetParameters(cb,targetAbstractMinFaceNum,tolerance,IsoParametrizator::SM_Euristic,convergenceSpeed);break;
}
IsoParametrizator::ReturnCode ret=Parametrizator.Parametrize<CMeshO>(mesh,doublestep);
if (ret==IsoParametrizator::Done)
{
Parametrizator.PrintAttributes();
float aggregate,L2;
int n_faces;
Parametrizator.getValues(aggregate,L2,n_faces);
Log("Num Faces of Abstract Domain: %d, One way stretch efficiency: %.4f, Area+Angle Distorsion %.4f ",n_faces,L2,aggregate*100.f);
}
else
{
if (!isTXTenabled)
m->clearDataMask(MeshModel::MM_VERTTEXCOORD);
if (!isFMarkenabled)
m->clearDataMask(MeshModel::MM_FACEMARK);
if (!isVMarkenabled)
m->clearDataMask(MeshModel::MM_VERTMARK);
if (!isVColorenabled)
m->clearDataMask(MeshModel::MM_VERTCOLOR);
if (!isFColorenabled)
m->clearDataMask(MeshModel::MM_FACECOLOR);
if (ret==IsoParametrizator::NonPrecondition)
this->errorMessage="non possible parameterization because of violated preconditions";
else
if (ret==IsoParametrizator::FailParam)
this->errorMessage="non possible parameterization cause because missing the intepolation for some triangle of original the mesh (maybe due to topologycal noise)";
return false;
}
Parametrizator.ExportMeshes(para_mesh,abs_mesh);
isoPHandle=vcg::tri::Allocator<CMeshO>::AddPerMeshAttribute<IsoParametrization>(*mesh,"isoparametrization");
bool isOK=isoPHandle().Init(&abs_mesh,¶_mesh);
///copy back to original mesh
isoPHandle().CopyParametrization<CMeshO>(mesh);
if (!isOK)
{
Log("Problems gathering parameterization \n");
return false;
}
if (!isVMarkenabled)
m->clearDataMask(MeshModel::MM_VERTMARK);
if (!isFMarkenabled)
m->clearDataMask(MeshModel::MM_FACEMARK);
return true;
}
case ISOP_REMESHING :
{
bool b=vcg::tri::Allocator<CMeshO>::IsValidHandle<IsoParametrization>(*mesh,isoPHandle);
if (!b)
{
this->errorMessage="You must compute the Base domain before remeshing. Use the Isoparametrization command.";
return false;
}
int SamplingRate=par.getInt("SamplingRate");
MeshModel* mm=md.addNewMesh("Re-meshed");
CMeshO *rem=&mm->cm;
DiamSampl.Init(&isoPHandle());
DiamSampl.SamplePos(SamplingRate);
DiamSampl.GetMesh<CMeshO>(*rem);
int n_diamonds,inFace,inEdge,inStar,n_merged;
DiamSampl.getResData(n_diamonds,inFace,inEdge,inStar,n_merged);
Log("INTERPOLATION DOMAINS");
Log("In Face: %d \n",inFace);
Log("In Diamond: %d \n",inEdge);
Log("In Star: %d \n",inStar);
Log("Merged %d vertices\n",n_merged);
mm->updateDataMask(MeshModel::MM_FACEFACETOPO);
mm->updateDataMask(MeshModel::MM_VERTFACETOPO);
PrintStats(rem);
vcg::tri::UpdateNormals<CMeshO>::PerFace(*rem);
return true;
}
case ISOP_DIAMPARAM :
{
bool b=vcg::tri::Allocator<CMeshO>::IsValidHandle<IsoParametrization>(*mesh,isoPHandle);
if (!b)
{
this->errorMessage="You must compute the Base domain before remeshing. Use the Isoparametrization command.";
return false;
}
float border_size=par.getDynamicFloat("BorderSize");
MeshModel* mm=md.addNewMesh("Diam-Parameterized");
mm->updateDataMask(MeshModel::MM_WEDGTEXCOORD);
mm->updateDataMask(MeshModel::MM_VERTCOLOR);
CMeshO *rem=&mm->cm;
DiamondParametrizator DiaPara;
DiaPara.Init(&isoPHandle());
DiaPara.SetCoordinates<CMeshO>(*rem,border_size);
vcg::tri::UpdateNormals<CMeshO>::PerFace(*rem);
return true;
}
case ISOP_LOAD :
{
QString AbsName = par.getString("AbsName");
bool isTXTenabled=m->hasDataMask(MeshModel::MM_VERTTEXCOORD);
if (!isTXTenabled)
{
this->errorMessage="Per Vertex Text Coordinates are not enabled";
return false;
}
if(!QFile(m->fullName()).exists())
{
this->errorMessage="File not exists";
return false;
}
bool b=vcg::tri::Allocator<CMeshO>::IsValidHandle<IsoParametrization>(*mesh,isoPHandle);
if (!b)
isoPHandle=vcg::tri::Allocator<CMeshO>::AddPerMeshAttribute<IsoParametrization>(*mesh,"isoparametrization");
QByteArray ba = AbsName.toLatin1();
char *path=ba.data();
bool Done=isoPHandle().LoadBaseDomain<CMeshO>(path,mesh,¶_mesh,true);
if (!Done)
{
this->errorMessage="Abstract domain doesnt fit well with the parametrized mesh";
return false;
}
return true;
}
case ISOP_SAVE :
{
bool b=vcg::tri::Allocator<CMeshO>::IsValidHandle<IsoParametrization>(*mesh,isoPHandle);
if (!b)
{
this->errorMessage="You must compute the Base domain before remeshing. Use the Isoparametrization command.";
return false;
}
/*QString Qpath=m->fullName();*/
QString AbsName = par.getString("AbsName");
QByteArray ba = AbsName.toLatin1();
char *path=ba.data();
isoPHandle().SaveBaseDomain(path);
return true;
}
}
return false;
}
bool FilterIsoParametrization::applyFilter(QAction *filter, MeshDocument& md, RichParameterSet & par, vcg::CallBackPos *cb)
{
MeshModel* m = md.mm(); //get current mesh from document
CMeshO *mesh=&m->cm;
switch(ID(filter))
{
case ISOP_PARAM :
{
int targetAbstractMinFaceNum = par.getInt("targetAbstractMinFaceNum");
int targetAbstractMaxFaceNum = par.getInt("targetAbstractMaxFaceNum");
int convergenceSpeed = par.getInt("convergenceSpeed");
int stopCriteria=par.getEnum("stopCriteria");
bool doublestep=par.getBool("DoubleStep");
IsoParametrizator Parametrizator;
m->updateDataMask(MeshModel::MM_FACEFACETOPO);
m->updateDataMask(MeshModel::MM_VERTQUALITY); // needed to store patch index
bool isTXTenabled=m->hasDataMask(MeshModel::MM_VERTTEXCOORD);
if (!isTXTenabled)
m->updateDataMask(MeshModel::MM_VERTTEXCOORD);
bool isVMarkenabled=m->hasDataMask(MeshModel::MM_VERTMARK);
if (!isVMarkenabled)
m->updateDataMask(MeshModel::MM_VERTMARK);
bool isFMarkenabled=m->hasDataMask(MeshModel::MM_FACEMARK);
if (!isFMarkenabled)
m->updateDataMask(MeshModel::MM_FACEMARK);
bool isVColorenabled=m->hasDataMask(MeshModel::MM_VERTCOLOR);
if (!isVColorenabled)
m->updateDataMask(MeshModel::MM_VERTCOLOR);
bool isFColorenabled=m->hasDataMask(MeshModel::MM_FACECOLOR);
if (!isFColorenabled)
m->updateDataMask(MeshModel::MM_FACECOLOR);
int tolerance = targetAbstractMaxFaceNum-targetAbstractMinFaceNum;
switch (stopCriteria)
{
case 0:
Parametrizator.SetParameters(cb,targetAbstractMinFaceNum,tolerance,IsoParametrizator::SM_Euristic,convergenceSpeed);
break;
case 1:
Parametrizator.SetParameters(cb,targetAbstractMinFaceNum,tolerance,IsoParametrizator::SM_Corr,convergenceSpeed);
break;
case 2:
Parametrizator.SetParameters(cb,targetAbstractMinFaceNum,tolerance,IsoParametrizator::SM_Reg,convergenceSpeed);
break;
case 3:
Parametrizator.SetParameters(cb,targetAbstractMinFaceNum,tolerance,IsoParametrizator::SM_L2,convergenceSpeed);
break;
default:
Parametrizator.SetParameters(cb,targetAbstractMinFaceNum,tolerance,IsoParametrizator::SM_Euristic,convergenceSpeed);
break;
}
tri::ParamEdgeCollapseParameter pecp;
IsoParametrizator::ReturnCode ret=Parametrizator.Parametrize<CMeshO>(mesh,pecp,doublestep);
if (ret==IsoParametrizator::Done)
{
Parametrizator.PrintAttributes();
float aggregate,L2;
int n_faces;
Parametrizator.getValues(aggregate,L2,n_faces);
Log("Num Faces of Abstract Domain: %d, One way stretch efficiency: %.4f, Area+Angle Distorsion %.4f ",n_faces,L2,aggregate*100.f);
}
else
{
if (!isTXTenabled) m->clearDataMask(MeshModel::MM_VERTTEXCOORD);
if (!isFMarkenabled) m->clearDataMask(MeshModel::MM_FACEMARK);
if (!isVMarkenabled) m->clearDataMask(MeshModel::MM_VERTMARK);
if (!isVColorenabled) m->clearDataMask(MeshModel::MM_VERTCOLOR);
if (!isFColorenabled) m->clearDataMask(MeshModel::MM_FACECOLOR);
switch(ret)
{
case IsoParametrizator::MultiComponent:
this->errorMessage="non possible parameterization because of multi componet mesh";
return false;
case IsoParametrizator::NonSizeCons:
this->errorMessage="non possible parameterization because of non size consistent mesh";
return false;
case IsoParametrizator::NonManifoldE:
this->errorMessage="non possible parameterization because of non manifold edges";
return false;
case IsoParametrizator::NonManifoldV:
this->errorMessage="non possible parameterization because of non manifold vertices";
return false;
case IsoParametrizator::NonWatertigh:
this->errorMessage="non possible parameterization because of non watertight mesh";
return false;
case IsoParametrizator::FailParam:
this->errorMessage="non possible parameterization cause one of the following reasons:\n Topologycal noise \n Too Low resolution mesh \n Too Bad triangulation \n";
return false;
default:
this->errorMessage="unknown error";
return false;
}
}
// At this point we are sure that everithing went ok so we can allocate surely the abstract
AbstractMesh *abs_mesh = new AbstractMesh();
ParamMesh *para_mesh = new ParamMesh();
Parametrizator.ExportMeshes(*para_mesh,*abs_mesh);
CMeshO::PerMeshAttributeHandle<IsoParametrization> isoPHandle;
isoPHandle=tri::Allocator<CMeshO>::AddPerMeshAttribute<IsoParametrization>(*mesh,"isoparametrization");
bool isOK=isoPHandle().Init(abs_mesh,para_mesh);
///copy back to original mesh
isoPHandle().CopyParametrization<CMeshO>(mesh);
if (!isOK)
{
this->errorMessage="Problems gathering parameterization \n";
return false;
}
if (!isVMarkenabled)
m->clearDataMask(MeshModel::MM_VERTMARK);
if (!isFMarkenabled)
m->clearDataMask(MeshModel::MM_FACEMARK);
return true;
}
case ISOP_REMESHING :
{
CMeshO::PerMeshAttributeHandle<IsoParametrization> isoPHandle =
tri::Allocator<CMeshO>::FindPerMeshAttribute<IsoParametrization>(*mesh,"isoparametrization");
bool b=tri::Allocator<CMeshO>::IsValidHandle<IsoParametrization>(*mesh,isoPHandle);
if (!b)
{
this->errorMessage="You must compute the Base domain before remeshing. Use the Isoparametrization command.";
return false;
}
int SamplingRate=par.getInt("SamplingRate");
if (!SamplingRate>2)
{
this->errorMessage="Sampling rate must be >1";
return false;
}
MeshModel* mm=md.addNewMesh("","Re-meshed");
CMeshO *rem=&mm->cm;
DiamSampler DiamSampl;
DiamSampl.Init(&isoPHandle());
bool done=DiamSampl.SamplePos(SamplingRate);
assert(done);
DiamSampl.GetMesh<CMeshO>(*rem);
int n_diamonds,inFace,inEdge,inStar,n_merged;
DiamSampl.getResData(n_diamonds,inFace,inEdge,inStar,n_merged);
Log("INTERPOLATION DOMAINS");
Log("In Face: %d \n",inFace);
Log("In Diamond: %d \n",inEdge);
Log("In Star: %d \n",inStar);
Log("Merged %d vertices\n",n_merged);
mm->updateDataMask(MeshModel::MM_FACEFACETOPO);
mm->updateDataMask(MeshModel::MM_VERTFACETOPO);
PrintStats(rem);
tri::UpdateNormal<CMeshO>::PerFace(*rem);
return true;
}
case ISOP_DIAMPARAM :
{
CMeshO::PerMeshAttributeHandle<IsoParametrization> isoPHandle =
tri::Allocator<CMeshO>::FindPerMeshAttribute<IsoParametrization>(*mesh,"isoparametrization");
bool b=tri::Allocator<CMeshO>::IsValidHandle<IsoParametrization>(*mesh,isoPHandle);
if (!b)
{
this->errorMessage="You must compute the Base domain before remeshing. Use the Isoparametrization command.";
return false;
}
float border_size=par.getDynamicFloat("BorderSize");
MeshModel* mm=md.addNewMesh("","Diam-Parameterized");
mm->updateDataMask(MeshModel::MM_WEDGTEXCOORD);
mm->updateDataMask(MeshModel::MM_VERTCOLOR);
CMeshO *rem=&mm->cm;
DiamondParametrizator DiaPara;
DiaPara.Init(&isoPHandle());
DiaPara.SetCoordinates<CMeshO>(*rem,border_size);
tri::UpdateNormal<CMeshO>::PerFace(*rem);
return true;
}
case ISOP_LOAD :
{
QString AbsName = par.getString("AbsName");
m->updateDataMask(MeshModel::MM_WEDGTEXCOORD);
m->updateDataMask(MeshModel::MM_VERTTEXCOORD);
m->updateDataMask(MeshModel::MM_FACECOLOR);
m->updateDataMask(MeshModel::MM_VERTQUALITY);
m->updateDataMask(MeshModel::MM_FACEMARK);
if(!QFile(m->fullName()).exists())
{
this->errorMessage="File not exists";
return false;
}
CMeshO::PerMeshAttributeHandle<IsoParametrization> isoPHandle =
tri::Allocator<CMeshO>::FindPerMeshAttribute<IsoParametrization>(*mesh,"isoparametrization");
bool b=tri::Allocator<CMeshO>::IsValidHandle<IsoParametrization>(*mesh,isoPHandle);
if (!b)
isoPHandle=tri::Allocator<CMeshO>::AddPerMeshAttribute<IsoParametrization>(*mesh,"isoparametrization");
QByteArray ba = AbsName.toLatin1();
char *path=ba.data();
AbstractMesh *abs_mesh = new AbstractMesh();
ParamMesh *para_mesh = new ParamMesh();
bool Done=isoPHandle().LoadBaseDomain<CMeshO>(path,mesh,para_mesh,abs_mesh,true);
if (!Done)
{
this->errorMessage="Abstract domain doesnt fit well with the parametrized mesh";
delete para_mesh;
delete abs_mesh;
return false;
}
return true;
}
case ISOP_SAVE :
{
m->updateDataMask(MeshModel::MM_VERTQUALITY);
CMeshO::PerMeshAttributeHandle<IsoParametrization> isoPHandle =
tri::Allocator<CMeshO>::FindPerMeshAttribute<IsoParametrization>(*mesh,"isoparametrization");
bool b=tri::Allocator<CMeshO>::IsValidHandle<IsoParametrization>(*mesh,isoPHandle);
if (!b)
{
this->errorMessage="You must compute the Base domain before remeshing. Use the Isoparametrization command.";
return false;
}
/*QString Qpath=m->fullName();*/
QString AbsName = par.getString("AbsName");
QByteArray ba = AbsName.toLatin1();
char *path=ba.data();
isoPHandle().SaveBaseDomain(path);
return true;
}
case ISOP_TRANSFER:
{
MeshModel *mmtrg = par.getMesh("targetMesh");
MeshModel *mmsrc = par.getMesh("targetMesh");
CMeshO *trgMesh=&mmtrg->cm;
CMeshO *srcMesh=&mmsrc->cm;
CMeshO::PerMeshAttributeHandle<IsoParametrization> isoPHandle =
tri::Allocator<CMeshO>::FindPerMeshAttribute<IsoParametrization>(*mesh,"isoparametrization");
bool b=tri::Allocator<CMeshO>::IsValidHandle<IsoParametrization>(*srcMesh,isoPHandle);
if (!b)
{
this->errorMessage="Your source mesh must have the abstract isoparametrization. Use the Isoparametrization command.";
return false;
}
IsoTransfer IsoTr;
AbstractMesh *abs_mesh = isoPHandle().AbsMesh();
ParamMesh *para_mesh = isoPHandle().ParaMesh();
mmtrg->updateDataMask(MeshModel::MM_WEDGTEXCOORD);
mmtrg->updateDataMask(MeshModel::MM_VERTTEXCOORD);
mmtrg->updateDataMask(MeshModel::MM_FACECOLOR);
mmtrg->updateDataMask(MeshModel::MM_VERTQUALITY);
mmtrg->updateDataMask(MeshModel::MM_FACEMARK);
IsoTr.Transfer<CMeshO>(isoPHandle(),*trgMesh);
isoPHandle().Clear();
tri::Allocator<CMeshO>::DeletePerMeshAttribute(*srcMesh,isoPHandle);
isoPHandle=tri::Allocator<CMeshO>::AddPerMeshAttribute<IsoParametrization>(*trgMesh,"isoparametrization");
isoPHandle().AbsMesh()=abs_mesh;
isoPHandle().SetParamMesh<CMeshO>(trgMesh,para_mesh);
return true;
}
}
return false;
}
