ExprResult Sema::ActOnFunctionCallExpr(Scope *S, FunctionDefn *FnD, Expr* Fn,
SourceLocation LParenLoc, MultiExprArg args, SourceLocation RParenLoc) {
unsigned NumArgs = args.size();
Expr **Args = args.release();
FunctionCall *FNCall = new(getASTContext())FunctionCall(getASTContext(),
Fn,Args,NumArgs,FnD->getType(),mlang::VK_RValue,RParenLoc);
if(FNCall==NULL)
return ExprError();
return Owned(FNCall);
}
ExprResult Sema::ActOnRowVectorExpr(MultiExprArg Rows) {
Expr** exprs = Rows.release();
unsigned NumRows = Rows.size();
ASTContext &ctx = getASTContext();
Type EleTy = exprs[0]->getType();
Type VTy = Context.getVectorType(EleTy, NumRows,
VectorType::GenericVector, true);
RowVectorExpr *E = new (ctx) RowVectorExpr(ctx, exprs, NumRows, VTy);
if(E == NULL)
return ExprError();
return Owned(E);
}
ExprResult Sema::ActOnArrayIndexExpr(Scope *S, VarDefn *Var, Expr *Base,
SourceLocation LLoc, MultiExprArg args, SourceLocation RLoc,
bool isCell) {
Expr **Args = args.release();
unsigned NumArgs = args.size();
// FIXME : we should not use Base type here
ArrayIndex *Ai = new(getASTContext())ArrayIndex(getASTContext(),
Base,Args,NumArgs,Base->getType(),mlang::VK_LValue,RLoc, isCell);
if(Ai==NULL)
return ExprError();
return Owned(Ai);
}
// Checks if there is a conflict between the input and output lists with the
// clobbers list. If there's a conflict, returns the location of the
// conflicted clobber, else returns nullptr
static SourceLocation
getClobberConflictLocation(MultiExprArg Exprs, StringLiteral **Constraints,
StringLiteral **Clobbers, int NumClobbers,
const TargetInfo &Target, ASTContext &Cont) {
llvm::StringSet<> InOutVars;
// Collect all the input and output registers from the extended asm
// statement in order to check for conflicts with the clobber list
for (unsigned int i = 0; i < Exprs.size(); ++i) {
StringRef Constraint = Constraints[i]->getString();
StringRef InOutReg = Target.getConstraintRegister(
Constraint, extractRegisterName(Exprs[i], Target));
if (InOutReg != "")
InOutVars.insert(InOutReg);
}
// Check for each item in the clobber list if it conflicts with the input
// or output
for (int i = 0; i < NumClobbers; ++i) {
StringRef Clobber = Clobbers[i]->getString();
// We only check registers, therefore we don't check cc and memory
// clobbers
if (Clobber == "cc" || Clobber == "memory")
continue;
Clobber = Target.getNormalizedGCCRegisterName(Clobber, true);
// Go over the output's registers we collected
if (InOutVars.count(Clobber))
return Clobbers[i]->getLocStart();
}
return SourceLocation();
}
ExprResult Sema::BuildMatrix(MultiExprArg Mats, SourceLocation LBracketLoc,
SourceLocation RBracketLoc) {
Expr** exprs = Mats.release();
unsigned NumRows = Mats.size();
unsigned NumCols = 1; //FIXME
RowVectorExpr *VE = cast<RowVectorExpr>(exprs[0]);
if(VE)
NumCols = VE->getNumSubExprs();
ASTContext &ctx = getASTContext();
Type T = exprs[0]->getType();
const VectorType *VT = T->getAs<VectorType>();
Type EleTy = VT->getElementType();
Type MTy = Context.getMatrixType(EleTy, NumRows, NumCols,
MatrixType::Full);
ConcatExpr *E = new (ctx) ConcatExpr(ctx, exprs, NumRows, MTy,
LBracketLoc, RBracketLoc);
if(E==NULL)
return ExprError();
return Owned(E);
}
StmtResult Sema::ActOnGCCAsmStmt(SourceLocation AsmLoc, bool IsSimple,
bool IsVolatile, unsigned NumOutputs,
unsigned NumInputs, IdentifierInfo **Names,
MultiExprArg constraints, MultiExprArg Exprs,
Expr *asmString, MultiExprArg clobbers,
SourceLocation RParenLoc) {
unsigned NumClobbers = clobbers.size();
StringLiteral **Constraints =
reinterpret_cast<StringLiteral**>(constraints.data());
StringLiteral *AsmString = cast<StringLiteral>(asmString);
StringLiteral **Clobbers = reinterpret_cast<StringLiteral**>(clobbers.data());
SmallVector<TargetInfo::ConstraintInfo, 4> OutputConstraintInfos;
// The parser verifies that there is a string literal here.
if (!AsmString->isAscii())
return StmtError(Diag(AsmString->getLocStart(),diag::err_asm_wide_character)
<< AsmString->getSourceRange());
for (unsigned i = 0; i != NumOutputs; i++) {
StringLiteral *Literal = Constraints[i];
if (!Literal->isAscii())
return StmtError(Diag(Literal->getLocStart(),diag::err_asm_wide_character)
<< Literal->getSourceRange());
StringRef OutputName;
if (Names[i])
OutputName = Names[i]->getName();
TargetInfo::ConstraintInfo Info(Literal->getString(), OutputName);
if (!Context.getTargetInfo().validateOutputConstraint(Info))
return StmtError(Diag(Literal->getLocStart(),
diag::err_asm_invalid_output_constraint)
<< Info.getConstraintStr());
// Check that the output exprs are valid lvalues.
Expr *OutputExpr = Exprs[i];
if (CheckAsmLValue(OutputExpr, *this))
return StmtError(Diag(OutputExpr->getLocStart(),
diag::err_asm_invalid_lvalue_in_output)
<< OutputExpr->getSourceRange());
if (RequireCompleteType(OutputExpr->getLocStart(), Exprs[i]->getType(),
diag::err_dereference_incomplete_type))
return StmtError();
OutputConstraintInfos.push_back(Info);
}
SmallVector<TargetInfo::ConstraintInfo, 4> InputConstraintInfos;
for (unsigned i = NumOutputs, e = NumOutputs + NumInputs; i != e; i++) {
StringLiteral *Literal = Constraints[i];
if (!Literal->isAscii())
return StmtError(Diag(Literal->getLocStart(),diag::err_asm_wide_character)
<< Literal->getSourceRange());
StringRef InputName;
if (Names[i])
InputName = Names[i]->getName();
TargetInfo::ConstraintInfo Info(Literal->getString(), InputName);
if (!Context.getTargetInfo().validateInputConstraint(OutputConstraintInfos.data(),
NumOutputs, Info)) {
return StmtError(Diag(Literal->getLocStart(),
diag::err_asm_invalid_input_constraint)
<< Info.getConstraintStr());
}
Expr *InputExpr = Exprs[i];
// Only allow void types for memory constraints.
if (Info.allowsMemory() && !Info.allowsRegister()) {
if (CheckAsmLValue(InputExpr, *this))
return StmtError(Diag(InputExpr->getLocStart(),
diag::err_asm_invalid_lvalue_in_input)
<< Info.getConstraintStr()
<< InputExpr->getSourceRange());
} else {
ExprResult Result = DefaultFunctionArrayLvalueConversion(Exprs[i]);
if (Result.isInvalid())
return StmtError();
Exprs[i] = Result.get();
}
if (Info.allowsRegister()) {
if (InputExpr->getType()->isVoidType()) {
return StmtError(Diag(InputExpr->getLocStart(),
diag::err_asm_invalid_type_in_input)
<< InputExpr->getType() << Info.getConstraintStr()
<< InputExpr->getSourceRange());
}
}
InputConstraintInfos.push_back(Info);
const Type *Ty = Exprs[i]->getType().getTypePtr();
if (Ty->isDependentType())
continue;
if (!Ty->isVoidType() || !Info.allowsMemory())
if (RequireCompleteType(InputExpr->getLocStart(), Exprs[i]->getType(),
diag::err_dereference_incomplete_type))
return StmtError();
unsigned Size = Context.getTypeSize(Ty);
if (!Context.getTargetInfo().validateInputSize(Literal->getString(),
Size))
return StmtError(Diag(InputExpr->getLocStart(),
diag::err_asm_invalid_input_size)
<< Info.getConstraintStr());
}
// Check that the clobbers are valid.
for (unsigned i = 0; i != NumClobbers; i++) {
StringLiteral *Literal = Clobbers[i];
if (!Literal->isAscii())
return StmtError(Diag(Literal->getLocStart(),diag::err_asm_wide_character)
<< Literal->getSourceRange());
StringRef Clobber = Literal->getString();
if (!Context.getTargetInfo().isValidClobber(Clobber))
return StmtError(Diag(Literal->getLocStart(),
diag::err_asm_unknown_register_name) << Clobber);
}
GCCAsmStmt *NS =
new (Context) GCCAsmStmt(Context, AsmLoc, IsSimple, IsVolatile, NumOutputs,
NumInputs, Names, Constraints, Exprs.data(),
AsmString, NumClobbers, Clobbers, RParenLoc);
// Validate the asm string, ensuring it makes sense given the operands we
// have.
SmallVector<GCCAsmStmt::AsmStringPiece, 8> Pieces;
unsigned DiagOffs;
if (unsigned DiagID = NS->AnalyzeAsmString(Pieces, Context, DiagOffs)) {
Diag(getLocationOfStringLiteralByte(AsmString, DiagOffs), DiagID)
<< AsmString->getSourceRange();
return StmtError();
}
// Validate constraints and modifiers.
for (unsigned i = 0, e = Pieces.size(); i != e; ++i) {
GCCAsmStmt::AsmStringPiece &Piece = Pieces[i];
if (!Piece.isOperand()) continue;
// Look for the correct constraint index.
unsigned Idx = 0;
unsigned ConstraintIdx = 0;
for (unsigned i = 0, e = NS->getNumOutputs(); i != e; ++i, ++ConstraintIdx) {
TargetInfo::ConstraintInfo &Info = OutputConstraintInfos[i];
if (Idx == Piece.getOperandNo())
break;
++Idx;
if (Info.isReadWrite()) {
if (Idx == Piece.getOperandNo())
break;
++Idx;
}
}
for (unsigned i = 0, e = NS->getNumInputs(); i != e; ++i, ++ConstraintIdx) {
TargetInfo::ConstraintInfo &Info = InputConstraintInfos[i];
if (Idx == Piece.getOperandNo())
break;
++Idx;
if (Info.isReadWrite()) {
if (Idx == Piece.getOperandNo())
break;
++Idx;
}
}
// Now that we have the right indexes go ahead and check.
StringLiteral *Literal = Constraints[ConstraintIdx];
const Type *Ty = Exprs[ConstraintIdx]->getType().getTypePtr();
if (Ty->isDependentType() || Ty->isIncompleteType())
continue;
unsigned Size = Context.getTypeSize(Ty);
if (!Context.getTargetInfo()
.validateConstraintModifier(Literal->getString(), Piece.getModifier(),
Size))
Diag(Exprs[ConstraintIdx]->getLocStart(),
diag::warn_asm_mismatched_size_modifier);
}
// Validate tied input operands for type mismatches.
for (unsigned i = 0, e = InputConstraintInfos.size(); i != e; ++i) {
TargetInfo::ConstraintInfo &Info = InputConstraintInfos[i];
// If this is a tied constraint, verify that the output and input have
// either exactly the same type, or that they are int/ptr operands with the
// same size (int/long, int*/long, are ok etc).
if (!Info.hasTiedOperand()) continue;
unsigned TiedTo = Info.getTiedOperand();
unsigned InputOpNo = i+NumOutputs;
Expr *OutputExpr = Exprs[TiedTo];
Expr *InputExpr = Exprs[InputOpNo];
if (OutputExpr->isTypeDependent() || InputExpr->isTypeDependent())
continue;
QualType InTy = InputExpr->getType();
QualType OutTy = OutputExpr->getType();
if (Context.hasSameType(InTy, OutTy))
continue; // All types can be tied to themselves.
// Decide if the input and output are in the same domain (integer/ptr or
// floating point.
enum AsmDomain {
AD_Int, AD_FP, AD_Other
} InputDomain, OutputDomain;
if (InTy->isIntegerType() || InTy->isPointerType())
InputDomain = AD_Int;
else if (InTy->isRealFloatingType())
InputDomain = AD_FP;
else
InputDomain = AD_Other;
if (OutTy->isIntegerType() || OutTy->isPointerType())
OutputDomain = AD_Int;
else if (OutTy->isRealFloatingType())
OutputDomain = AD_FP;
else
OutputDomain = AD_Other;
// They are ok if they are the same size and in the same domain. This
// allows tying things like:
// void* to int*
// void* to int if they are the same size.
// double to long double if they are the same size.
//
uint64_t OutSize = Context.getTypeSize(OutTy);
uint64_t InSize = Context.getTypeSize(InTy);
if (OutSize == InSize && InputDomain == OutputDomain &&
InputDomain != AD_Other)
continue;
// If the smaller input/output operand is not mentioned in the asm string,
// then we can promote the smaller one to a larger input and the asm string
// won't notice.
bool SmallerValueMentioned = false;
// If this is a reference to the input and if the input was the smaller
// one, then we have to reject this asm.
if (isOperandMentioned(InputOpNo, Pieces)) {
// This is a use in the asm string of the smaller operand. Since we
// codegen this by promoting to a wider value, the asm will get printed
// "wrong".
SmallerValueMentioned |= InSize < OutSize;
}
if (isOperandMentioned(TiedTo, Pieces)) {
// If this is a reference to the output, and if the output is the larger
// value, then it's ok because we'll promote the input to the larger type.
SmallerValueMentioned |= OutSize < InSize;
}
// If the smaller value wasn't mentioned in the asm string, and if the
// output was a register, just extend the shorter one to the size of the
// larger one.
if (!SmallerValueMentioned && InputDomain != AD_Other &&
OutputConstraintInfos[TiedTo].allowsRegister())
continue;
// Either both of the operands were mentioned or the smaller one was
// mentioned. One more special case that we'll allow: if the tied input is
// integer, unmentioned, and is a constant, then we'll allow truncating it
// down to the size of the destination.
if (InputDomain == AD_Int && OutputDomain == AD_Int &&
!isOperandMentioned(InputOpNo, Pieces) &&
InputExpr->isEvaluatable(Context)) {
CastKind castKind =
(OutTy->isBooleanType() ? CK_IntegralToBoolean : CK_IntegralCast);
InputExpr = ImpCastExprToType(InputExpr, OutTy, castKind).get();
Exprs[InputOpNo] = InputExpr;
NS->setInputExpr(i, InputExpr);
continue;
}
Diag(InputExpr->getLocStart(),
diag::err_asm_tying_incompatible_types)
<< InTy << OutTy << OutputExpr->getSourceRange()
<< InputExpr->getSourceRange();
return StmtError();
}
return NS;
}
/// ActOnCXXNew - Parsed a C++ 'new' expression (C++ 5.3.4), as in e.g.:
/// @code new (memory) int[size][4] @endcode
/// or
/// @code ::new Foo(23, "hello") @endcode
/// For the interpretation of this heap of arguments, consult the base version.
Action::OwningExprResult
Sema::ActOnCXXNew(SourceLocation StartLoc, bool UseGlobal,
SourceLocation PlacementLParen, MultiExprArg PlacementArgs,
SourceLocation PlacementRParen, bool ParenTypeId,
Declarator &D, SourceLocation ConstructorLParen,
MultiExprArg ConstructorArgs,
SourceLocation ConstructorRParen)
{
Expr *ArraySize = 0;
unsigned Skip = 0;
// If the specified type is an array, unwrap it and save the expression.
if (D.getNumTypeObjects() > 0 &&
D.getTypeObject(0).Kind == DeclaratorChunk::Array) {
DeclaratorChunk &Chunk = D.getTypeObject(0);
if (Chunk.Arr.hasStatic)
return ExprError(Diag(Chunk.Loc, diag::err_static_illegal_in_new)
<< D.getSourceRange());
if (!Chunk.Arr.NumElts)
return ExprError(Diag(Chunk.Loc, diag::err_array_new_needs_size)
<< D.getSourceRange());
ArraySize = static_cast<Expr*>(Chunk.Arr.NumElts);
Skip = 1;
}
QualType AllocType = GetTypeForDeclarator(D, /*Scope=*/0, Skip);
if (D.getInvalidType())
return ExprError();
if (CheckAllocatedType(AllocType, D))
return ExprError();
QualType ResultType = AllocType->isDependentType()
? Context.DependentTy
: Context.getPointerType(AllocType);
// That every array dimension except the first is constant was already
// checked by the type check above.
// C++ 5.3.4p6: "The expression in a direct-new-declarator shall have integral
// or enumeration type with a non-negative value."
if (ArraySize && !ArraySize->isTypeDependent()) {
QualType SizeType = ArraySize->getType();
if (!SizeType->isIntegralType() && !SizeType->isEnumeralType())
return ExprError(Diag(ArraySize->getSourceRange().getBegin(),
diag::err_array_size_not_integral)
<< SizeType << ArraySize->getSourceRange());
// Let's see if this is a constant < 0. If so, we reject it out of hand.
// We don't care about special rules, so we tell the machinery it's not
// evaluated - it gives us a result in more cases.
if (!ArraySize->isValueDependent()) {
llvm::APSInt Value;
if (ArraySize->isIntegerConstantExpr(Value, Context, 0, false)) {
if (Value < llvm::APSInt(
llvm::APInt::getNullValue(Value.getBitWidth()), false))
return ExprError(Diag(ArraySize->getSourceRange().getBegin(),
diag::err_typecheck_negative_array_size)
<< ArraySize->getSourceRange());
}
}
}
FunctionDecl *OperatorNew = 0;
FunctionDecl *OperatorDelete = 0;
Expr **PlaceArgs = (Expr**)PlacementArgs.get();
unsigned NumPlaceArgs = PlacementArgs.size();
if (!AllocType->isDependentType() &&
!Expr::hasAnyTypeDependentArguments(PlaceArgs, NumPlaceArgs) &&
FindAllocationFunctions(StartLoc,
SourceRange(PlacementLParen, PlacementRParen),
UseGlobal, AllocType, ArraySize, PlaceArgs,
NumPlaceArgs, OperatorNew, OperatorDelete))
return ExprError();
bool Init = ConstructorLParen.isValid();
// --- Choosing a constructor ---
// C++ 5.3.4p15
// 1) If T is a POD and there's no initializer (ConstructorLParen is invalid)
// the object is not initialized. If the object, or any part of it, is
// const-qualified, it's an error.
// 2) If T is a POD and there's an empty initializer, the object is value-
// initialized.
// 3) If T is a POD and there's one initializer argument, the object is copy-
// constructed.
// 4) If T is a POD and there's more initializer arguments, it's an error.
// 5) If T is not a POD, the initializer arguments are used as constructor
// arguments.
//
// Or by the C++0x formulation:
// 1) If there's no initializer, the object is default-initialized according
// to C++0x rules.
// 2) Otherwise, the object is direct-initialized.
CXXConstructorDecl *Constructor = 0;
Expr **ConsArgs = (Expr**)ConstructorArgs.get();
unsigned NumConsArgs = ConstructorArgs.size();
if (AllocType->isDependentType()) {
// Skip all the checks.
}
// FIXME: Should check for primitive/aggregate here, not record.
else if (const RecordType *RT = AllocType->getAsRecordType()) {
// FIXME: This is incorrect for when there is an empty initializer and
// no user-defined constructor. Must zero-initialize, not default-construct.
Constructor = PerformInitializationByConstructor(
AllocType, ConsArgs, NumConsArgs,
D.getSourceRange().getBegin(),
SourceRange(D.getSourceRange().getBegin(),
ConstructorRParen),
RT->getDecl()->getDeclName(),
NumConsArgs != 0 ? IK_Direct : IK_Default);
if (!Constructor)
return ExprError();
} else {
if (!Init) {
// FIXME: Check that no subpart is const.
if (AllocType.isConstQualified())
return ExprError(Diag(StartLoc, diag::err_new_uninitialized_const)
<< D.getSourceRange());
} else if (NumConsArgs == 0) {
// Object is value-initialized. Do nothing.
} else if (NumConsArgs == 1) {
// Object is direct-initialized.
// FIXME: WHAT DeclarationName do we pass in here?
if (CheckInitializerTypes(ConsArgs[0], AllocType, StartLoc,
DeclarationName() /*AllocType.getAsString()*/,
/*DirectInit=*/true))
return ExprError();
} else {
return ExprError(Diag(StartLoc,
diag::err_builtin_direct_init_more_than_one_arg)
<< SourceRange(ConstructorLParen, ConstructorRParen));
}
}
// FIXME: Also check that the destructor is accessible. (C++ 5.3.4p16)
PlacementArgs.release();
ConstructorArgs.release();
return Owned(new (Context) CXXNewExpr(UseGlobal, OperatorNew, PlaceArgs,
NumPlaceArgs, ParenTypeId, ArraySize, Constructor, Init,
ConsArgs, NumConsArgs, OperatorDelete, ResultType,
StartLoc, Init ? ConstructorRParen : SourceLocation()));
}
/// ActOnCXXTypeConstructExpr - Parse construction of a specified type.
/// Can be interpreted either as function-style casting ("int(x)")
/// or class type construction ("ClassType(x,y,z)")
/// or creation of a value-initialized type ("int()").
Action::OwningExprResult
Sema::ActOnCXXTypeConstructExpr(SourceRange TypeRange, TypeTy *TypeRep,
SourceLocation LParenLoc,
MultiExprArg exprs,
SourceLocation *CommaLocs,
SourceLocation RParenLoc) {
assert(TypeRep && "Missing type!");
QualType Ty = QualType::getFromOpaquePtr(TypeRep);
unsigned NumExprs = exprs.size();
Expr **Exprs = (Expr**)exprs.get();
SourceLocation TyBeginLoc = TypeRange.getBegin();
SourceRange FullRange = SourceRange(TyBeginLoc, RParenLoc);
if (Ty->isDependentType() ||
CallExpr::hasAnyTypeDependentArguments(Exprs, NumExprs)) {
exprs.release();
return Owned(new (Context) CXXTemporaryObjectExpr(0, Ty, TyBeginLoc,
Exprs, NumExprs,
RParenLoc));
}
// C++ [expr.type.conv]p1:
// If the expression list is a single expression, the type conversion
// expression is equivalent (in definedness, and if defined in meaning) to the
// corresponding cast expression.
//
if (NumExprs == 1) {
if (CheckCastTypes(TypeRange, Ty, Exprs[0]))
return ExprError();
exprs.release();
return Owned(new (Context) CXXFunctionalCastExpr(Ty.getNonReferenceType(),
Ty, TyBeginLoc, Exprs[0],
RParenLoc));
}
if (const RecordType *RT = Ty->getAsRecordType()) {
CXXRecordDecl *Record = cast<CXXRecordDecl>(RT->getDecl());
if (NumExprs > 1 || Record->hasUserDeclaredConstructor()) {
CXXConstructorDecl *Constructor
= PerformInitializationByConstructor(Ty, Exprs, NumExprs,
TypeRange.getBegin(),
SourceRange(TypeRange.getBegin(),
RParenLoc),
DeclarationName(),
IK_Direct);
if (!Constructor)
return ExprError();
exprs.release();
return Owned(new (Context) CXXTemporaryObjectExpr(Constructor, Ty,
TyBeginLoc, Exprs,
NumExprs, RParenLoc));
}
// Fall through to value-initialize an object of class type that
// doesn't have a user-declared default constructor.
}
// C++ [expr.type.conv]p1:
// If the expression list specifies more than a single value, the type shall
// be a class with a suitably declared constructor.
//
if (NumExprs > 1)
return ExprError(Diag(CommaLocs[0],
diag::err_builtin_func_cast_more_than_one_arg)
<< FullRange);
assert(NumExprs == 0 && "Expected 0 expressions");
// C++ [expr.type.conv]p2:
// The expression T(), where T is a simple-type-specifier for a non-array
// complete object type or the (possibly cv-qualified) void type, creates an
// rvalue of the specified type, which is value-initialized.
//
if (Ty->isArrayType())
return ExprError(Diag(TyBeginLoc,
diag::err_value_init_for_array_type) << FullRange);
if (!Ty->isDependentType() && !Ty->isVoidType() &&
RequireCompleteType(TyBeginLoc, Ty,
diag::err_invalid_incomplete_type_use, FullRange))
return ExprError();
if (RequireNonAbstractType(TyBeginLoc, Ty,
diag::err_allocation_of_abstract_type))
return ExprError();
exprs.release();
return Owned(new (Context) CXXZeroInitValueExpr(Ty, TyBeginLoc, RParenLoc));
}
StmtResult Sema::ActOnGCCAsmStmt(SourceLocation AsmLoc, bool IsSimple,
bool IsVolatile, unsigned NumOutputs,
unsigned NumInputs, IdentifierInfo **Names,
MultiExprArg constraints, MultiExprArg Exprs,
Expr *asmString, MultiExprArg clobbers,
SourceLocation RParenLoc) {
unsigned NumClobbers = clobbers.size();
StringLiteral **Constraints =
reinterpret_cast<StringLiteral**>(constraints.data());
StringLiteral *AsmString = cast<StringLiteral>(asmString);
StringLiteral **Clobbers = reinterpret_cast<StringLiteral**>(clobbers.data());
SmallVector<TargetInfo::ConstraintInfo, 4> OutputConstraintInfos;
// The parser verifies that there is a string literal here.
assert(AsmString->isAscii());
bool ValidateConstraints =
DeclAttrsMatchCUDAMode(getLangOpts(), getCurFunctionDecl());
for (unsigned i = 0; i != NumOutputs; i++) {
StringLiteral *Literal = Constraints[i];
assert(Literal->isAscii());
StringRef OutputName;
if (Names[i])
OutputName = Names[i]->getName();
TargetInfo::ConstraintInfo Info(Literal->getString(), OutputName);
if (ValidateConstraints &&
!Context.getTargetInfo().validateOutputConstraint(Info))
return StmtError(Diag(Literal->getLocStart(),
diag::err_asm_invalid_output_constraint)
<< Info.getConstraintStr());
ExprResult ER = CheckPlaceholderExpr(Exprs[i]);
if (ER.isInvalid())
return StmtError();
Exprs[i] = ER.get();
// Check that the output exprs are valid lvalues.
Expr *OutputExpr = Exprs[i];
// Referring to parameters is not allowed in naked functions.
if (CheckNakedParmReference(OutputExpr, *this))
return StmtError();
// Bitfield can't be referenced with a pointer.
if (Info.allowsMemory() && OutputExpr->refersToBitField())
return StmtError(Diag(OutputExpr->getLocStart(),
diag::err_asm_bitfield_in_memory_constraint)
<< 1
<< Info.getConstraintStr()
<< OutputExpr->getSourceRange());
OutputConstraintInfos.push_back(Info);
// If this is dependent, just continue.
if (OutputExpr->isTypeDependent())
continue;
Expr::isModifiableLvalueResult IsLV =
OutputExpr->isModifiableLvalue(Context, /*Loc=*/nullptr);
switch (IsLV) {
case Expr::MLV_Valid:
// Cool, this is an lvalue.
break;
case Expr::MLV_ArrayType:
// This is OK too.
break;
case Expr::MLV_LValueCast: {
const Expr *LVal = OutputExpr->IgnoreParenNoopCasts(Context);
if (!getLangOpts().HeinousExtensions) {
Diag(LVal->getLocStart(), diag::err_invalid_asm_cast_lvalue)
<< OutputExpr->getSourceRange();
} else {
Diag(LVal->getLocStart(), diag::warn_invalid_asm_cast_lvalue)
<< OutputExpr->getSourceRange();
}
// Accept, even if we emitted an error diagnostic.
break;
}
case Expr::MLV_IncompleteType:
case Expr::MLV_IncompleteVoidType:
if (RequireCompleteType(OutputExpr->getLocStart(), Exprs[i]->getType(),
diag::err_dereference_incomplete_type))
return StmtError();
default:
return StmtError(Diag(OutputExpr->getLocStart(),
diag::err_asm_invalid_lvalue_in_output)
<< OutputExpr->getSourceRange());
}
unsigned Size = Context.getTypeSize(OutputExpr->getType());
if (!Context.getTargetInfo().validateOutputSize(Literal->getString(),
Size))
return StmtError(Diag(OutputExpr->getLocStart(),
diag::err_asm_invalid_output_size)
<< Info.getConstraintStr());
}
SmallVector<TargetInfo::ConstraintInfo, 4> InputConstraintInfos;
for (unsigned i = NumOutputs, e = NumOutputs + NumInputs; i != e; i++) {
StringLiteral *Literal = Constraints[i];
assert(Literal->isAscii());
StringRef InputName;
if (Names[i])
InputName = Names[i]->getName();
TargetInfo::ConstraintInfo Info(Literal->getString(), InputName);
if (ValidateConstraints &&
!Context.getTargetInfo().validateInputConstraint(
OutputConstraintInfos.data(), NumOutputs, Info)) {
return StmtError(Diag(Literal->getLocStart(),
diag::err_asm_invalid_input_constraint)
<< Info.getConstraintStr());
}
ExprResult ER = CheckPlaceholderExpr(Exprs[i]);
if (ER.isInvalid())
return StmtError();
Exprs[i] = ER.get();
Expr *InputExpr = Exprs[i];
// Referring to parameters is not allowed in naked functions.
if (CheckNakedParmReference(InputExpr, *this))
return StmtError();
// Bitfield can't be referenced with a pointer.
if (Info.allowsMemory() && InputExpr->refersToBitField())
return StmtError(Diag(InputExpr->getLocStart(),
diag::err_asm_bitfield_in_memory_constraint)
<< 0
<< Info.getConstraintStr()
<< InputExpr->getSourceRange());
// Only allow void types for memory constraints.
if (Info.allowsMemory() && !Info.allowsRegister()) {
if (CheckAsmLValue(InputExpr, *this))
return StmtError(Diag(InputExpr->getLocStart(),
diag::err_asm_invalid_lvalue_in_input)
<< Info.getConstraintStr()
<< InputExpr->getSourceRange());
} else if (Info.requiresImmediateConstant() && !Info.allowsRegister()) {
if (!InputExpr->isValueDependent()) {
llvm::APSInt Result;
if (!InputExpr->EvaluateAsInt(Result, Context))
return StmtError(
Diag(InputExpr->getLocStart(), diag::err_asm_immediate_expected)
<< Info.getConstraintStr() << InputExpr->getSourceRange());
if (!Info.isValidAsmImmediate(Result))
return StmtError(Diag(InputExpr->getLocStart(),
diag::err_invalid_asm_value_for_constraint)
<< Result.toString(10) << Info.getConstraintStr()
<< InputExpr->getSourceRange());
}
} else {
ExprResult Result = DefaultFunctionArrayLvalueConversion(Exprs[i]);
if (Result.isInvalid())
return StmtError();
Exprs[i] = Result.get();
}
if (Info.allowsRegister()) {
if (InputExpr->getType()->isVoidType()) {
return StmtError(Diag(InputExpr->getLocStart(),
diag::err_asm_invalid_type_in_input)
<< InputExpr->getType() << Info.getConstraintStr()
<< InputExpr->getSourceRange());
}
}
InputConstraintInfos.push_back(Info);
const Type *Ty = Exprs[i]->getType().getTypePtr();
if (Ty->isDependentType())
continue;
if (!Ty->isVoidType() || !Info.allowsMemory())
if (RequireCompleteType(InputExpr->getLocStart(), Exprs[i]->getType(),
diag::err_dereference_incomplete_type))
return StmtError();
unsigned Size = Context.getTypeSize(Ty);
if (!Context.getTargetInfo().validateInputSize(Literal->getString(),
Size))
return StmtError(Diag(InputExpr->getLocStart(),
diag::err_asm_invalid_input_size)
<< Info.getConstraintStr());
}
// Check that the clobbers are valid.
for (unsigned i = 0; i != NumClobbers; i++) {
StringLiteral *Literal = Clobbers[i];
assert(Literal->isAscii());
StringRef Clobber = Literal->getString();
if (!Context.getTargetInfo().isValidClobber(Clobber))
return StmtError(Diag(Literal->getLocStart(),
diag::err_asm_unknown_register_name) << Clobber);
}
GCCAsmStmt *NS =
new (Context) GCCAsmStmt(Context, AsmLoc, IsSimple, IsVolatile, NumOutputs,
NumInputs, Names, Constraints, Exprs.data(),
AsmString, NumClobbers, Clobbers, RParenLoc);
// Validate the asm string, ensuring it makes sense given the operands we
// have.
SmallVector<GCCAsmStmt::AsmStringPiece, 8> Pieces;
unsigned DiagOffs;
if (unsigned DiagID = NS->AnalyzeAsmString(Pieces, Context, DiagOffs)) {
Diag(getLocationOfStringLiteralByte(AsmString, DiagOffs), DiagID)
<< AsmString->getSourceRange();
return StmtError();
}
// Validate constraints and modifiers.
for (unsigned i = 0, e = Pieces.size(); i != e; ++i) {
GCCAsmStmt::AsmStringPiece &Piece = Pieces[i];
if (!Piece.isOperand()) continue;
// Look for the correct constraint index.
unsigned ConstraintIdx = Piece.getOperandNo();
unsigned NumOperands = NS->getNumOutputs() + NS->getNumInputs();
// Look for the (ConstraintIdx - NumOperands + 1)th constraint with
// modifier '+'.
if (ConstraintIdx >= NumOperands) {
unsigned I = 0, E = NS->getNumOutputs();
for (unsigned Cnt = ConstraintIdx - NumOperands; I != E; ++I)
if (OutputConstraintInfos[I].isReadWrite() && Cnt-- == 0) {
ConstraintIdx = I;
break;
}
assert(I != E && "Invalid operand number should have been caught in "
" AnalyzeAsmString");
}
// Now that we have the right indexes go ahead and check.
StringLiteral *Literal = Constraints[ConstraintIdx];
const Type *Ty = Exprs[ConstraintIdx]->getType().getTypePtr();
if (Ty->isDependentType() || Ty->isIncompleteType())
continue;
unsigned Size = Context.getTypeSize(Ty);
std::string SuggestedModifier;
if (!Context.getTargetInfo().validateConstraintModifier(
Literal->getString(), Piece.getModifier(), Size,
SuggestedModifier)) {
Diag(Exprs[ConstraintIdx]->getLocStart(),
diag::warn_asm_mismatched_size_modifier);
if (!SuggestedModifier.empty()) {
auto B = Diag(Piece.getRange().getBegin(),
diag::note_asm_missing_constraint_modifier)
<< SuggestedModifier;
SuggestedModifier = "%" + SuggestedModifier + Piece.getString();
B.AddFixItHint(FixItHint::CreateReplacement(Piece.getRange(),
SuggestedModifier));
}
}
}
// Validate tied input operands for type mismatches.
unsigned NumAlternatives = ~0U;
for (unsigned i = 0, e = OutputConstraintInfos.size(); i != e; ++i) {
TargetInfo::ConstraintInfo &Info = OutputConstraintInfos[i];
StringRef ConstraintStr = Info.getConstraintStr();
unsigned AltCount = ConstraintStr.count(',') + 1;
if (NumAlternatives == ~0U)
NumAlternatives = AltCount;
else if (NumAlternatives != AltCount)
return StmtError(Diag(NS->getOutputExpr(i)->getLocStart(),
diag::err_asm_unexpected_constraint_alternatives)
<< NumAlternatives << AltCount);
}
for (unsigned i = 0, e = InputConstraintInfos.size(); i != e; ++i) {
TargetInfo::ConstraintInfo &Info = InputConstraintInfos[i];
StringRef ConstraintStr = Info.getConstraintStr();
unsigned AltCount = ConstraintStr.count(',') + 1;
if (NumAlternatives == ~0U)
NumAlternatives = AltCount;
else if (NumAlternatives != AltCount)
return StmtError(Diag(NS->getInputExpr(i)->getLocStart(),
diag::err_asm_unexpected_constraint_alternatives)
<< NumAlternatives << AltCount);
// If this is a tied constraint, verify that the output and input have
// either exactly the same type, or that they are int/ptr operands with the
// same size (int/long, int*/long, are ok etc).
if (!Info.hasTiedOperand()) continue;
unsigned TiedTo = Info.getTiedOperand();
unsigned InputOpNo = i+NumOutputs;
Expr *OutputExpr = Exprs[TiedTo];
Expr *InputExpr = Exprs[InputOpNo];
if (OutputExpr->isTypeDependent() || InputExpr->isTypeDependent())
continue;
QualType InTy = InputExpr->getType();
QualType OutTy = OutputExpr->getType();
if (Context.hasSameType(InTy, OutTy))
continue; // All types can be tied to themselves.
// Decide if the input and output are in the same domain (integer/ptr or
// floating point.
enum AsmDomain {
AD_Int, AD_FP, AD_Other
} InputDomain, OutputDomain;
if (InTy->isIntegerType() || InTy->isPointerType())
InputDomain = AD_Int;
else if (InTy->isRealFloatingType())
InputDomain = AD_FP;
else
InputDomain = AD_Other;
if (OutTy->isIntegerType() || OutTy->isPointerType())
OutputDomain = AD_Int;
else if (OutTy->isRealFloatingType())
OutputDomain = AD_FP;
else
OutputDomain = AD_Other;
// They are ok if they are the same size and in the same domain. This
// allows tying things like:
// void* to int*
// void* to int if they are the same size.
// double to long double if they are the same size.
//
uint64_t OutSize = Context.getTypeSize(OutTy);
uint64_t InSize = Context.getTypeSize(InTy);
if (OutSize == InSize && InputDomain == OutputDomain &&
InputDomain != AD_Other)
continue;
// If the smaller input/output operand is not mentioned in the asm string,
// then we can promote the smaller one to a larger input and the asm string
// won't notice.
bool SmallerValueMentioned = false;
// If this is a reference to the input and if the input was the smaller
// one, then we have to reject this asm.
if (isOperandMentioned(InputOpNo, Pieces)) {
// This is a use in the asm string of the smaller operand. Since we
// codegen this by promoting to a wider value, the asm will get printed
// "wrong".
SmallerValueMentioned |= InSize < OutSize;
}
if (isOperandMentioned(TiedTo, Pieces)) {
// If this is a reference to the output, and if the output is the larger
// value, then it's ok because we'll promote the input to the larger type.
SmallerValueMentioned |= OutSize < InSize;
}
// If the smaller value wasn't mentioned in the asm string, and if the
// output was a register, just extend the shorter one to the size of the
// larger one.
if (!SmallerValueMentioned && InputDomain != AD_Other &&
OutputConstraintInfos[TiedTo].allowsRegister())
continue;
// Either both of the operands were mentioned or the smaller one was
// mentioned. One more special case that we'll allow: if the tied input is
// integer, unmentioned, and is a constant, then we'll allow truncating it
// down to the size of the destination.
if (InputDomain == AD_Int && OutputDomain == AD_Int &&
!isOperandMentioned(InputOpNo, Pieces) &&
InputExpr->isEvaluatable(Context)) {
CastKind castKind =
(OutTy->isBooleanType() ? CK_IntegralToBoolean : CK_IntegralCast);
InputExpr = ImpCastExprToType(InputExpr, OutTy, castKind).get();
Exprs[InputOpNo] = InputExpr;
NS->setInputExpr(i, InputExpr);
continue;
}
Diag(InputExpr->getLocStart(),
diag::err_asm_tying_incompatible_types)
<< InTy << OutTy << OutputExpr->getSourceRange()
<< InputExpr->getSourceRange();
return StmtError();
}
return NS;
}
/// \param ReceiverType The type of the object receiving the
/// message. When \p ReceiverTypeInfo is non-NULL, this is the same
/// type as that refers to. For a superclass send, this is the type of
/// the superclass.
///
/// \param SuperLoc The location of the "super" keyword in a
/// superclass message.
///
/// \param Sel The selector to which the message is being sent.
///
/// \param Method The method that this class message is invoking, if
/// already known.
///
/// \param LBracLoc The location of the opening square bracket ']'.
///
/// \param RBrac The location of the closing square bracket ']'.
///
/// \param Args The message arguments.
ExprResult Sema::BuildClassMessage(TypeSourceInfo *ReceiverTypeInfo,
QualType ReceiverType,
SourceLocation SuperLoc,
Selector Sel,
ObjCMethodDecl *Method,
SourceLocation LBracLoc,
SourceLocation SelectorLoc,
SourceLocation RBracLoc,
MultiExprArg ArgsIn) {
SourceLocation Loc = SuperLoc.isValid()? SuperLoc
: ReceiverTypeInfo->getTypeLoc().getSourceRange().getBegin();
if (LBracLoc.isInvalid()) {
Diag(Loc, diag::err_missing_open_square_message_send)
<< FixItHint::CreateInsertion(Loc, "[");
LBracLoc = Loc;
}
if (ReceiverType->isDependentType()) {
// If the receiver type is dependent, we can't type-check anything
// at this point. Build a dependent expression.
unsigned NumArgs = ArgsIn.size();
Expr **Args = reinterpret_cast<Expr **>(ArgsIn.release());
assert(SuperLoc.isInvalid() && "Message to super with dependent type");
return Owned(ObjCMessageExpr::Create(Context, ReceiverType,
VK_RValue, LBracLoc, ReceiverTypeInfo,
Sel, SelectorLoc, /*Method=*/0,
Args, NumArgs, RBracLoc));
}
// Find the class to which we are sending this message.
ObjCInterfaceDecl *Class = 0;
const ObjCObjectType *ClassType = ReceiverType->getAs<ObjCObjectType>();
if (!ClassType || !(Class = ClassType->getInterface())) {
Diag(Loc, diag::err_invalid_receiver_class_message)
<< ReceiverType;
return ExprError();
}
assert(Class && "We don't know which class we're messaging?");
(void)DiagnoseUseOfDecl(Class, Loc);
// Find the method we are messaging.
if (!Method) {
if (Class->isForwardDecl()) {
// A forward class used in messaging is treated as a 'Class'
Diag(Loc, diag::warn_receiver_forward_class) << Class->getDeclName();
Method = LookupFactoryMethodInGlobalPool(Sel,
SourceRange(LBracLoc, RBracLoc));
if (Method)
Diag(Method->getLocation(), diag::note_method_sent_forward_class)
<< Method->getDeclName();
}
if (!Method)
Method = Class->lookupClassMethod(Sel);
// If we have an implementation in scope, check "private" methods.
if (!Method)
Method = LookupPrivateClassMethod(Sel, Class);
if (Method && DiagnoseUseOfDecl(Method, Loc))
return ExprError();
}
// Check the argument types and determine the result type.
QualType ReturnType;
ExprValueKind VK = VK_RValue;
unsigned NumArgs = ArgsIn.size();
Expr **Args = reinterpret_cast<Expr **>(ArgsIn.release());
if (CheckMessageArgumentTypes(Args, NumArgs, Sel, Method, true,
LBracLoc, RBracLoc, ReturnType, VK))
return ExprError();
if (Method && !Method->getResultType()->isVoidType() &&
RequireCompleteType(LBracLoc, Method->getResultType(),
diag::err_illegal_message_expr_incomplete_type))
return ExprError();
// Construct the appropriate ObjCMessageExpr.
Expr *Result;
if (SuperLoc.isValid())
Result = ObjCMessageExpr::Create(Context, ReturnType, VK, LBracLoc,
SuperLoc, /*IsInstanceSuper=*/false,
ReceiverType, Sel, SelectorLoc,
Method, Args, NumArgs, RBracLoc);
else
Result = ObjCMessageExpr::Create(Context, ReturnType, VK, LBracLoc,
ReceiverTypeInfo, Sel, SelectorLoc,
Method, Args, NumArgs, RBracLoc);
return MaybeBindToTemporary(Result);
}
/// \brief Build an Objective-C instance message expression.
///
/// This routine takes care of both normal instance messages and
/// instance messages to the superclass instance.
///
/// \param Receiver The expression that computes the object that will
/// receive this message. This may be empty, in which case we are
/// sending to the superclass instance and \p SuperLoc must be a valid
/// source location.
///
/// \param ReceiverType The (static) type of the object receiving the
/// message. When a \p Receiver expression is provided, this is the
/// same type as that expression. For a superclass instance send, this
/// is a pointer to the type of the superclass.
///
/// \param SuperLoc The location of the "super" keyword in a
/// superclass instance message.
///
/// \param Sel The selector to which the message is being sent.
///
/// \param Method The method that this instance message is invoking, if
/// already known.
///
/// \param LBracLoc The location of the opening square bracket ']'.
///
/// \param RBrac The location of the closing square bracket ']'.
///
/// \param Args The message arguments.
ExprResult Sema::BuildInstanceMessage(Expr *Receiver,
QualType ReceiverType,
SourceLocation SuperLoc,
Selector Sel,
ObjCMethodDecl *Method,
SourceLocation LBracLoc,
SourceLocation SelectorLoc,
SourceLocation RBracLoc,
MultiExprArg ArgsIn) {
// The location of the receiver.
SourceLocation Loc = SuperLoc.isValid()? SuperLoc : Receiver->getLocStart();
if (LBracLoc.isInvalid()) {
Diag(Loc, diag::err_missing_open_square_message_send)
<< FixItHint::CreateInsertion(Loc, "[");
LBracLoc = Loc;
}
// If we have a receiver expression, perform appropriate promotions
// and determine receiver type.
if (Receiver) {
if (Receiver->isTypeDependent()) {
// If the receiver is type-dependent, we can't type-check anything
// at this point. Build a dependent expression.
unsigned NumArgs = ArgsIn.size();
Expr **Args = reinterpret_cast<Expr **>(ArgsIn.release());
assert(SuperLoc.isInvalid() && "Message to super with dependent type");
return Owned(ObjCMessageExpr::Create(Context, Context.DependentTy,
VK_RValue, LBracLoc, Receiver, Sel,
SelectorLoc, /*Method=*/0,
Args, NumArgs, RBracLoc));
}
// If necessary, apply function/array conversion to the receiver.
// C99 6.7.5.3p[7,8].
DefaultFunctionArrayLvalueConversion(Receiver);
ReceiverType = Receiver->getType();
}
if (!Method) {
// Handle messages to id.
bool receiverIsId = ReceiverType->isObjCIdType();
if (receiverIsId || ReceiverType->isBlockPointerType() ||
(Receiver && Context.isObjCNSObjectType(Receiver->getType()))) {
Method = LookupInstanceMethodInGlobalPool(Sel,
SourceRange(LBracLoc, RBracLoc),
receiverIsId);
if (!Method)
Method = LookupFactoryMethodInGlobalPool(Sel,
SourceRange(LBracLoc, RBracLoc),
receiverIsId);
} else if (ReceiverType->isObjCClassType() ||
ReceiverType->isObjCQualifiedClassType()) {
// Handle messages to Class.
if (ObjCMethodDecl *CurMeth = getCurMethodDecl()) {
if (ObjCInterfaceDecl *ClassDecl = CurMeth->getClassInterface()) {
// First check the public methods in the class interface.
Method = ClassDecl->lookupClassMethod(Sel);
if (!Method)
Method = LookupPrivateClassMethod(Sel, ClassDecl);
// FIXME: if we still haven't found a method, we need to look in
// protocols (if we have qualifiers).
}
if (Method && DiagnoseUseOfDecl(Method, Loc))
return ExprError();
}
if (!Method) {
// If not messaging 'self', look for any factory method named 'Sel'.
if (!Receiver || !isSelfExpr(Receiver)) {
Method = LookupFactoryMethodInGlobalPool(Sel,
SourceRange(LBracLoc, RBracLoc),
true);
if (!Method) {
// If no class (factory) method was found, check if an _instance_
// method of the same name exists in the root class only.
Method = LookupInstanceMethodInGlobalPool(Sel,
SourceRange(LBracLoc, RBracLoc),
true);
if (Method)
if (const ObjCInterfaceDecl *ID =
dyn_cast<ObjCInterfaceDecl>(Method->getDeclContext())) {
if (ID->getSuperClass())
Diag(Loc, diag::warn_root_inst_method_not_found)
<< Sel << SourceRange(LBracLoc, RBracLoc);
}
}
}
}
} else {
ObjCInterfaceDecl* ClassDecl = 0;
// We allow sending a message to a qualified ID ("id<foo>"), which is ok as
// long as one of the protocols implements the selector (if not, warn).
if (const ObjCObjectPointerType *QIdTy
= ReceiverType->getAsObjCQualifiedIdType()) {
// Search protocols for instance methods.
Method = LookupMethodInQualifiedType(Sel, QIdTy, true);
if (!Method)
Method = LookupMethodInQualifiedType(Sel, QIdTy, false);
} else if (const ObjCObjectPointerType *OCIType
= ReceiverType->getAsObjCInterfacePointerType()) {
// We allow sending a message to a pointer to an interface (an object).
ClassDecl = OCIType->getInterfaceDecl();
// FIXME: consider using LookupInstanceMethodInGlobalPool, since it will be
// faster than the following method (which can do *many* linear searches).
// The idea is to add class info to MethodPool.
Method = ClassDecl->lookupInstanceMethod(Sel);
if (!Method)
// Search protocol qualifiers.
Method = LookupMethodInQualifiedType(Sel, OCIType, true);
bool forwardClass = false;
if (!Method) {
// If we have implementations in scope, check "private" methods.
Method = LookupPrivateInstanceMethod(Sel, ClassDecl);
if (!Method && (!Receiver || !isSelfExpr(Receiver))) {
// If we still haven't found a method, look in the global pool. This
// behavior isn't very desirable, however we need it for GCC
// compatibility. FIXME: should we deviate??
if (OCIType->qual_empty()) {
Method = LookupInstanceMethodInGlobalPool(Sel,
SourceRange(LBracLoc, RBracLoc));
forwardClass = OCIType->getInterfaceDecl()->isForwardDecl();
if (Method && !forwardClass)
Diag(Loc, diag::warn_maynot_respond)
<< OCIType->getInterfaceDecl()->getIdentifier() << Sel;
}
}
}
if (Method && DiagnoseUseOfDecl(Method, Loc, forwardClass))
return ExprError();
} else if (!Context.getObjCIdType().isNull() &&
(ReceiverType->isPointerType() ||
ReceiverType->isIntegerType())) {
// Implicitly convert integers and pointers to 'id' but emit a warning.
Diag(Loc, diag::warn_bad_receiver_type)
<< ReceiverType
<< Receiver->getSourceRange();
if (ReceiverType->isPointerType())
ImpCastExprToType(Receiver, Context.getObjCIdType(),
CK_BitCast);
else {
// TODO: specialized warning on null receivers?
bool IsNull = Receiver->isNullPointerConstant(Context,
Expr::NPC_ValueDependentIsNull);
ImpCastExprToType(Receiver, Context.getObjCIdType(),
IsNull ? CK_NullToPointer : CK_IntegralToPointer);
}
ReceiverType = Receiver->getType();
}
else if (getLangOptions().CPlusPlus &&
!PerformContextuallyConvertToObjCId(Receiver)) {
if (ImplicitCastExpr *ICE = dyn_cast<ImplicitCastExpr>(Receiver)) {
Receiver = ICE->getSubExpr();
ReceiverType = Receiver->getType();
}
return BuildInstanceMessage(Receiver,
ReceiverType,
SuperLoc,
Sel,
Method,
LBracLoc,
SelectorLoc,
RBracLoc,
move(ArgsIn));
} else {
// Reject other random receiver types (e.g. structs).
Diag(Loc, diag::err_bad_receiver_type)
<< ReceiverType << Receiver->getSourceRange();
return ExprError();
}
}
}
// Check the message arguments.
unsigned NumArgs = ArgsIn.size();
Expr **Args = reinterpret_cast<Expr **>(ArgsIn.release());
QualType ReturnType;
ExprValueKind VK = VK_RValue;
bool ClassMessage = (ReceiverType->isObjCClassType() ||
ReceiverType->isObjCQualifiedClassType());
if (CheckMessageArgumentTypes(Args, NumArgs, Sel, Method, ClassMessage,
LBracLoc, RBracLoc, ReturnType, VK))
return ExprError();
if (Method && !Method->getResultType()->isVoidType() &&
RequireCompleteType(LBracLoc, Method->getResultType(),
diag::err_illegal_message_expr_incomplete_type))
return ExprError();
// Construct the appropriate ObjCMessageExpr instance.
Expr *Result;
if (SuperLoc.isValid())
Result = ObjCMessageExpr::Create(Context, ReturnType, VK, LBracLoc,
SuperLoc, /*IsInstanceSuper=*/true,
ReceiverType, Sel, SelectorLoc, Method,
Args, NumArgs, RBracLoc);
else
Result = ObjCMessageExpr::Create(Context, ReturnType, VK, LBracLoc,
Receiver, Sel, SelectorLoc, Method,
Args, NumArgs, RBracLoc);
return MaybeBindToTemporary(Result);
}
