int main(int argc, char **argv)
{
MythScreenWizardCommandLineParser cmdline;
if (!cmdline.Parse(argc, argv))
{
cmdline.PrintHelp();
return GENERIC_EXIT_INVALID_CMDLINE;
}
if (cmdline.toBool("showhelp"))
{
cmdline.PrintHelp();
return GENERIC_EXIT_OK;
}
if (cmdline.toBool("showversion"))
{
cmdline.PrintVersion();
return GENERIC_EXIT_OK;
}
#ifdef Q_OS_MAC
// Without this, we can't set focus to any of the CheckBoxSetting, and most
// of the MythPushButton widgets, and they don't use the themed background.
QApplication::setDesktopSettingsAware(false);
#endif
new QApplication(argc, argv);
QCoreApplication::setApplicationName(MYTH_APPNAME_MYTHSCREENWIZARD);
int retval;
QString mask("general");
if ((retval = cmdline.ConfigureLogging(mask, false)) != GENERIC_EXIT_OK)
return retval;
CleanupGuard callCleanup(cleanup);
#ifndef _WIN32
QList<int> signallist;
signallist << SIGINT << SIGTERM << SIGSEGV << SIGABRT << SIGBUS << SIGFPE
<< SIGILL;
#if ! CONFIG_DARWIN
signallist << SIGRTMIN;
#endif
SignalHandler::Init(signallist);
signal(SIGHUP, SIG_IGN);
#endif
if ((retval = cmdline.ConfigureLogging()) != GENERIC_EXIT_OK)
return retval;
if (!cmdline.toString("display").isEmpty())
{
MythUIHelper::SetX11Display(cmdline.toString("display"));
}
gContext = new MythContext(MYTH_BINARY_VERSION);
if (!gContext->Init(true, false, true))
{
LOG(VB_GENERAL, LOG_ERR, LOC + "Failed to init MythContext, exiting.");
return GENERIC_EXIT_NO_MYTHCONTEXT;
}
if (gCoreContext->GetNumSetting("RunFrontendInWindow"))
{
LOG(VB_GENERAL, LOG_WARNING, LOC +
"Refusing to run screen setup wizard in windowed mode.");
return GENERIC_EXIT_NOT_OK;
}
int GuiOffsetX = gCoreContext->GetNumSetting("GuiOffsetX", 0);
int GuiOffsetY = gCoreContext->GetNumSetting("GuiOffsetY", 0);
int GuiWidth = gCoreContext->GetNumSetting("GuiWidth", 0);
int GuiHeight = gCoreContext->GetNumSetting("GuiHeight", 0);
gCoreContext->OverrideSettingForSession("GuiOffsetX", "0");
gCoreContext->OverrideSettingForSession("GuiOffsetY", "0");
gCoreContext->OverrideSettingForSession("GuiWidth", "0");
gCoreContext->OverrideSettingForSession("GuiHeight", "0");
cmdline.ApplySettingsOverride();
GetMythUI()->LoadQtConfig();
QString themename = gCoreContext->GetSetting("Theme", DEFAULT_UI_THEME);
QString themedir = GetMythUI()->FindThemeDir(themename);
if (themedir.isEmpty())
{
LOG(VB_GENERAL, LOG_ERR, QString("Couldn't find theme '%1'")
.arg(themename));
return GENERIC_EXIT_NO_THEME;
}
MythMainWindow *mainWindow = GetMythMainWindow();
#if CONFIG_DARWIN
mainWindow->Init(OPENGL2_PAINTER);
#else
mainWindow->Init();
#endif
mainWindow->setWindowTitle(QObject::tr("MythTV Screen Setup Wizard"));
// We must reload the translation after a language change and this
// also means clearing the cached/loaded theme strings, so reload the
// theme which also triggers a translation reload
/* if (LanguageSelection::prompt())
{
if (!reloadTheme())
return GENERIC_EXIT_NO_THEME;
}
*/
/* I don't think we need to connect to the backend
if (!gCoreContext->ConnectToMasterServer())
{
LOG(VB_GENERAL, LOG_ERR, LOC + "Failed to connect to master server");
return GENERIC_EXIT_CONNECT_ERROR;
}
MythSystemEventHandler *sysEventHandler = new MythSystemEventHandler();
*/
startAppearWiz(GuiOffsetX, GuiOffsetY, GuiWidth, GuiHeight);
int exitCode = qApp->exec();
/*
if (sysEventHandler)
delete sysEventHandler;
*/
return exitCode ? exitCode : GENERIC_EXIT_OK;
}
int main(int argc, char **argv)
{
bool bPromptForBackend = false;
bool bBypassAutoDiscovery = false;
bool upgradeAllowed = false;
bool cmdline_err;
MythCommandLineParser cmdline(
kCLPOverrideSettingsFile |
kCLPOverrideSettings |
kCLPWindowed |
kCLPNoWindowed |
kCLPGetSettings |
kCLPQueryVersion |
kCLPVerbose |
kCLPNoUPnP |
#ifdef USING_X11
kCLPDisplay |
#endif // USING_X11
kCLPExtra |
kCLPGeometry);
// Handle --help before QApplication is created, so that
// we can print help even if X11 is absent.
for (int argpos = 1; argpos < argc; ++argpos)
{
QString arg(argv[argpos]);
if (arg == "-h" || arg == "--help" || arg == "--usage")
{
ShowUsage(cmdline);
return GENERIC_EXIT_OK;
}
}
for (int argpos = 1; argpos < argc; ++argpos)
{
if (cmdline.PreParse(argc, argv, argpos, cmdline_err))
{
if (cmdline_err)
return GENERIC_EXIT_INVALID_CMDLINE;
if (cmdline.WantsToExit())
return GENERIC_EXIT_OK;
}
}
#ifdef Q_WS_MACX
// Without this, we can't set focus to any of the CheckBoxSetting, and most
// of the MythPushButton widgets, and they don't use the themed background.
QApplication::setDesktopSettingsAware(false);
#endif
QApplication a(argc, argv);
QCoreApplication::setApplicationName(MYTH_APPNAME_MYTHFRONTEND);
QString pluginname;
QFileInfo finfo(a.argv()[0]);
QString binname = finfo.baseName();
VERBOSE(VB_IMPORTANT, QString("%1 version: %2 [%3] www.mythtv.org")
.arg(MYTH_APPNAME_MYTHFRONTEND)
.arg(MYTH_SOURCE_PATH)
.arg(MYTH_SOURCE_VERSION));
bool ResetSettings = false;
if (binname.toLower() != "mythfrontend")
pluginname = binname;
for (int argpos = 1; argpos < a.argc(); ++argpos)
{
if (!strcmp(a.argv()[argpos],"--prompt") ||
!strcmp(a.argv()[argpos],"-p" ))
{
bPromptForBackend = true;
}
else if (!strcmp(a.argv()[argpos],"--disable-autodiscovery") ||
!strcmp(a.argv()[argpos],"-d" ))
{
bBypassAutoDiscovery = true;
}
else if (!strcmp(a.argv()[argpos],"-l") ||
!strcmp(a.argv()[argpos],"--logfile"))
{
if (a.argc()-1 > argpos)
{
logfile = a.argv()[argpos+1];
if (logfile.startsWith('-'))
{
cerr << "Invalid or missing argument"
" to -l/--logfile option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
else
{
++argpos;
}
}
else
{
cerr << "Missing argument to -l/--logfile option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
}
else if (cmdline.Parse(a.argc(), a.argv(), argpos, cmdline_err))
{
if (cmdline_err)
return GENERIC_EXIT_INVALID_CMDLINE;
if (cmdline.WantsToExit())
return GENERIC_EXIT_OK;
}
}
QMap<QString,QString> settingsOverride = cmdline.GetSettingsOverride();
if (logfile.size())
{
if (log_rotate(1) < 0)
cerr << "cannot open logfile; using stdout/stderr" << endl;
else
{
VERBOSE(VB_IMPORTANT, QString("%1 version: %2 [%3] www.mythtv.org")
.arg(MYTH_APPNAME_MYTHFRONTEND)
.arg(MYTH_SOURCE_PATH)
.arg(MYTH_SOURCE_VERSION));
signal(SIGHUP, &log_rotate_handler);
}
}
if (signal(SIGPIPE, SIG_IGN) == SIG_ERR)
cerr << "Unable to ignore SIGPIPE\n";
if (!cmdline.GetDisplay().isEmpty())
{
MythUIHelper::SetX11Display(cmdline.GetDisplay());
}
if (!cmdline.GetGeometry().isEmpty())
{
MythUIHelper::ParseGeometryOverride(cmdline.GetGeometry());
}
CleanupGuard callCleanup(cleanup);
gContext = new MythContext(MYTH_BINARY_VERSION);
if (cmdline.IsUPnPEnabled())
{
g_pUPnp = new MediaRenderer();
if (!g_pUPnp->initialized())
{
delete g_pUPnp;
g_pUPnp = NULL;
}
}
// Override settings as early as possible to cover bootstrapped screens
// such as the language prompt
settingsOverride = cmdline.GetSettingsOverride();
if (settingsOverride.size())
{
QMap<QString, QString>::iterator it;
for (it = settingsOverride.begin(); it != settingsOverride.end(); ++it)
{
VERBOSE(VB_IMPORTANT, QString("Setting '%1' being forced to '%2'")
.arg(it.key()).arg(*it));
gCoreContext->OverrideSettingForSession(it.key(), *it);
}
}
if (!gContext->Init(true, bPromptForBackend, bBypassAutoDiscovery))
{
VERBOSE(VB_IMPORTANT, "Failed to init MythContext, exiting.");
return GENERIC_EXIT_NO_MYTHCONTEXT;
}
if (!GetMythDB()->HaveSchema())
{
if (!InitializeMythSchema())
return GENERIC_EXIT_DB_ERROR;
}
for(int argpos = 1; argpos < a.argc(); ++argpos)
{
if (!strcmp(a.argv()[argpos],"-l") ||
!strcmp(a.argv()[argpos],"--logfile"))
{
// Arg processing for logfile already done (before MythContext)
++argpos;
} else if (!strcmp(a.argv()[argpos],"-v") ||
!strcmp(a.argv()[argpos],"--verbose"))
{
// Arg processing for verbose already done (before MythContext)
++argpos;
}
else if (!strcmp(a.argv()[argpos],"-r") ||
!strcmp(a.argv()[argpos],"--reset"))
{
ResetSettings = true;
}
else if (!strcmp(a.argv()[argpos],"--prompt") ||
!strcmp(a.argv()[argpos],"-p" ))
{
}
else if (!strcmp(a.argv()[argpos],"--disable-autodiscovery") ||
!strcmp(a.argv()[argpos],"-d" ))
{
}
else if (!strcmp(a.argv()[argpos],"--upgrade-schema") ||
!strcmp(a.argv()[argpos],"-u" ))
{
upgradeAllowed = true;
}
else if (cmdline.Parse(a.argc(), a.argv(), argpos, cmdline_err))
{
if (cmdline_err)
{
return GENERIC_EXIT_INVALID_CMDLINE;
}
if (cmdline.WantsToExit())
{
return GENERIC_EXIT_OK;
}
}
else if ((argpos + 1 == a.argc()) &&
(!QString(a.argv()[argpos]).startsWith('-')))
{
pluginname = a.argv()[argpos];
}
else
{
cerr << "Invalid argument: " << a.argv()[argpos] << endl;
ShowUsage(cmdline);
return GENERIC_EXIT_INVALID_CMDLINE;
}
}
QStringList settingsQuery = cmdline.GetSettingsQuery();
if (!settingsQuery.empty())
{
QStringList::const_iterator it = settingsQuery.begin();
for (; it != settingsQuery.end(); ++it)
{
QString value = gCoreContext->GetSetting(*it);
QString out = QString("\tSettings Value : %1 = %2")
.arg(*it).arg(value);
cout << out.toLocal8Bit().constData() << endl;
}
return GENERIC_EXIT_OK;
}
QString fileprefix = GetConfDir();
QDir dir(fileprefix);
if (!dir.exists())
dir.mkdir(fileprefix);
if (ResetSettings)
{
AppearanceSettings as;
as.Save();
gCoreContext->SaveSetting("Theme", DEFAULT_UI_THEME);
gCoreContext->SaveSetting("Language", "");
gCoreContext->SaveSetting("Country", "");
return GENERIC_EXIT_OK;
}
setuid(getuid());
VERBOSE(VB_IMPORTANT,
QString("Enabled verbose msgs: %1").arg(verboseString));
LCD::SetupLCD();
if (LCD *lcd = LCD::Get())
lcd->setupLEDs(RemoteGetRecordingMask);
MythTranslation::load("mythfrontend");
QString themename = gCoreContext->GetSetting("Theme", DEFAULT_UI_THEME);
QString themedir = GetMythUI()->FindThemeDir(themename);
if (themedir.isEmpty())
{
VERBOSE(VB_IMPORTANT, QString("Couldn't find theme '%1'")
.arg(themename));
return GENERIC_EXIT_NO_THEME;
}
GetMythUI()->LoadQtConfig();
themename = gCoreContext->GetSetting("Theme", DEFAULT_UI_THEME);
themedir = GetMythUI()->FindThemeDir(themename);
if (themedir.isEmpty())
{
VERBOSE(VB_IMPORTANT, QString("Couldn't find theme '%1'")
.arg(themename));
return GENERIC_EXIT_NO_THEME;
}
MythMainWindow *mainWindow = GetMythMainWindow();
mainWindow->Init();
mainWindow->setWindowTitle(QObject::tr("MythTV Frontend"));
// We must reload the translation after a language change and this
// also means clearing the cached/loaded theme strings, so reload the
// theme which also triggers a translation reload
if (LanguageSelection::prompt())
{
if (!reloadTheme())
return GENERIC_EXIT_NO_THEME;
}
if (!UpgradeTVDatabaseSchema(upgradeAllowed))
{
VERBOSE(VB_IMPORTANT,
"Couldn't upgrade database to new schema, exiting.");
return GENERIC_EXIT_DB_OUTOFDATE;
}
WriteDefaults();
// Refresh Global/Main Menu keys after DB update in case there was no DB
// when they were written originally
mainWindow->ResetKeys();
InitJumpPoints();
internal_media_init();
CleanupMyOldInUsePrograms();
pmanager = new MythPluginManager();
gContext->SetPluginManager(pmanager);
if (pluginname.size())
{
if (pmanager->run_plugin(pluginname) ||
pmanager->run_plugin("myth" + pluginname))
{
qApp->exec();
return GENERIC_EXIT_OK;
}
else
return GENERIC_EXIT_INVALID_CMDLINE;
}
MediaMonitor *mon = MediaMonitor::GetMediaMonitor();
if (mon)
{
mon->StartMonitoring();
mainWindow->installEventFilter(mon);
}
NetworkControl *networkControl = NULL;
if (gCoreContext->GetNumSetting("NetworkControlEnabled", 0))
{
int networkPort = gCoreContext->GetNumSetting("NetworkControlPort", 6545);
networkControl = new NetworkControl();
if (!networkControl->listen(QHostAddress::Any,networkPort))
VERBOSE(VB_IMPORTANT,
QString("NetworkControl failed to bind to port %1.")
.arg(networkPort));
}
#ifdef __linux__
#ifdef CONFIG_BINDINGS_PYTHON
HardwareProfile *profile = new HardwareProfile();
if (profile && profile->NeedsUpdate())
profile->SubmitProfile();
delete profile;
#endif
#endif
if (!RunMenu(themedir, themename) && !resetTheme(themedir, themename))
{
return GENERIC_EXIT_NO_THEME;
}
#ifndef _MSC_VER
// Setup handler for USR1 signals to reload theme
signal(SIGUSR1, &signal_USR1_handler);
// Setup handler for USR2 signals to restart LIRC
signal(SIGUSR2, &signal_USR2_handler);
#endif
ThemeUpdateChecker *themeUpdateChecker = NULL;
if (gCoreContext->GetNumSetting("ThemeUpdateNofications", 1))
themeUpdateChecker = new ThemeUpdateChecker();
MythSystemEventHandler *sysEventHandler = new MythSystemEventHandler();
GetMythMainWindow()->RegisterSystemEventHandler(sysEventHandler);
BackendConnectionManager bcm;
PreviewGeneratorQueue::CreatePreviewGeneratorQueue(
PreviewGenerator::kRemote, 50, 60);
int ret = qApp->exec();
PreviewGeneratorQueue::TeardownPreviewGeneratorQueue();
if (themeUpdateChecker)
delete themeUpdateChecker;
delete sysEventHandler;
pmanager->DestroyAllPlugins();
if (mon)
mon->deleteLater();
delete networkControl;
DestroyMythMainWindow();
return ret;
}
int main(int argc, char *argv[])
{
QString geometry = QString::null;
QString display = QString::null;
bool doScan = false;
bool doScanList = false;
bool doScanSaveOnly = false;
bool scanInteractive = true;
bool expertMode = false;
uint scanImport = 0;
bool scanFTAOnly = false;
ServiceRequirements scanServiceRequirements = kRequireAV;
uint scanCardId = 0;
QString scanTableName = "atsc-vsb8-us";
QString scanInputName = "";
MythTVSetupCommandLineParser cmdline;
if (!cmdline.Parse(argc, argv))
{
cmdline.PrintHelp();
return GENERIC_EXIT_INVALID_CMDLINE;
}
if (cmdline.toBool("showhelp"))
{
cmdline.PrintHelp();
return GENERIC_EXIT_OK;
}
if (cmdline.toBool("showversion"))
{
cmdline.PrintVersion();
return GENERIC_EXIT_OK;
}
bool quiet = false, use_display = true;
if (cmdline.toBool("scan"))
{
quiet = true;
use_display = false;
}
CleanupGuard callCleanup(cleanup);
#ifdef Q_WS_MACX
// Without this, we can't set focus to any of the CheckBoxSetting, and most
// of the MythPushButton widgets, and they don't use the themed background.
QApplication::setDesktopSettingsAware(FALSE);
#endif
new QApplication(argc, argv, use_display);
QCoreApplication::setApplicationName(MYTH_APPNAME_MYTHTV_SETUP);
if (cmdline.toBool("display"))
display = cmdline.toString("display");
if (cmdline.toBool("geometry"))
geometry = cmdline.toString("geometry");
int retval;
QString mask("general");
if ((retval = cmdline.ConfigureLogging(mask, quiet)) != GENERIC_EXIT_OK)
return retval;
if (cmdline.toBool("expert"))
expertMode = true;
if (cmdline.toBool("scanlist"))
doScanList = true;
if (cmdline.toBool("savescan"))
doScanSaveOnly = true;
if (cmdline.toBool("scannoninteractive"))
scanInteractive = false;
if (cmdline.toBool("importscan"))
scanImport = cmdline.toUInt("importscan");
if (cmdline.toBool("ftaonly"))
scanFTAOnly = true;
if (cmdline.toBool("servicetype"))
{
scanServiceRequirements = kRequireNothing;
if (cmdline.toString("servicetype").contains("radio"))
scanServiceRequirements = kRequireAudio;
if (cmdline.toString("servicetype").contains("tv"))
scanServiceRequirements = kRequireAV;
if (cmdline.toString("servicetype").contains("tv+radio") ||
cmdline.toString("servicetype").contains("radio+tv"))
scanServiceRequirements = kRequireAudio;
if (cmdline.toString("servicetype").contains("all"))
scanServiceRequirements = kRequireNothing;
}
if (cmdline.toBool("scan"))
{
scanCardId = cmdline.toUInt("scan");
doScan = true;
}
if (cmdline.toBool("freqtable"))
scanTableName = cmdline.toString("freqtable");
if (cmdline.toBool("inputname"))
scanInputName = cmdline.toString("inputname");
if (!display.isEmpty())
{
MythUIHelper::SetX11Display(display);
}
if (!geometry.isEmpty())
{
MythUIHelper::ParseGeometryOverride(geometry);
}
gContext = new MythContext(MYTH_BINARY_VERSION);
if (!gContext->Init(use_display)) // No Upnp, Prompt for db
{
LOG(VB_GENERAL, LOG_ERR, "Failed to init MythContext, exiting.");
return GENERIC_EXIT_NO_MYTHCONTEXT;
}
cmdline.ApplySettingsOverride();
if (!GetMythDB()->HaveSchema())
{
if (!InitializeMythSchema())
return GENERIC_EXIT_DB_ERROR;
}
if (use_display)
{
gCoreContext->SetSetting("Theme", DEFAULT_UI_THEME);
GetMythUI()->LoadQtConfig();
QString fileprefix = GetConfDir();
QDir dir(fileprefix);
if (!dir.exists())
dir.mkdir(fileprefix);
}
if (doScan)
{
bool okCardID = scanCardId;
QStringList inputnames = CardUtil::GetInputNames(scanCardId);
okCardID &= !inputnames.empty();
if (scanInputName.isEmpty())
scanInputName = CardUtil::GetStartInput(scanCardId);
bool okInputName = inputnames.contains(scanInputName);
doScan = (okCardID && okInputName);
if (!okCardID)
{
cerr << "You must enter a valid cardid to scan." << endl;
vector<uint> cardids = CardUtil::GetCardIDs();
if (cardids.empty())
{
cerr << "But no cards have been defined on this host"
<< endl;
return GENERIC_EXIT_INVALID_CMDLINE;
}
cerr << "Valid cards: " << endl;
for (uint i = 0; i < cardids.size(); i++)
{
fprintf(stderr, "%5i: %s %s\n",
cardids[i],
CardUtil::GetRawCardType(cardids[i])
.toAscii().constData(),
CardUtil::GetVideoDevice(cardids[i])
.toAscii().constData());
}
return GENERIC_EXIT_INVALID_CMDLINE;
}
if (!okInputName)
{
cerr << "You must enter a valid input to scan this card."
<< endl;
cerr << "Valid inputs: " << endl;
for (int i = 0; i < inputnames.size(); i++)
{
cerr << inputnames[i].toAscii().constData() << endl;
}
return GENERIC_EXIT_INVALID_CMDLINE;
}
}
if (doScan)
{
int ret = 0;
int firstBreak = scanTableName.indexOf("-");
int secondBreak = scanTableName.lastIndexOf("-");
if (!firstBreak || !secondBreak || firstBreak == secondBreak)
{
cerr << "Failed to parse the frequence table parameter "
<< scanTableName.toLocal8Bit().constData() << endl
<< "Please make sure it is in the format freq_std-"
"modulation-country." << endl;
return GENERIC_EXIT_INVALID_CMDLINE;
}
QString freq_std = scanTableName.mid(0, firstBreak).toLower();
QString mod = scanTableName.mid(
firstBreak+1, secondBreak-firstBreak-1).toLower();
QString tbl = scanTableName.mid(secondBreak+1).toLower();
uint inputid = CardUtil::GetInputID(scanCardId, scanInputName);
uint sourceid = CardUtil::GetSourceID(inputid);
QMap<QString,QString> startChan;
{
ChannelScannerCLI scanner(doScanSaveOnly, scanInteractive);
scanner.Scan(
(freq_std=="atsc") ?
ScanTypeSetting::FullScan_ATSC :
((freq_std=="dvbt") ?
ScanTypeSetting::FullScan_DVBT :
ScanTypeSetting::FullScan_ATSC),
/* cardid */ scanCardId,
/* inputname */ scanInputName,
/* sourceid */ sourceid,
/* ignore signal timeout */ false,
/* follow_nit */ true,
/* test decryption */ true,
scanFTAOnly,
scanServiceRequirements,
// stuff needed for particular scans
/* mplexid */ 0,
startChan, freq_std, mod, tbl);
ret = qApp->exec();
}
return (ret) ? GENERIC_EXIT_NOT_OK : GENERIC_EXIT_OK;
}
if (doScanList)
{
vector<ScanInfo> scans = LoadScanList();
cout<<" scanid cardid sourceid processed date"<<endl;
for (uint i = 0; i < scans.size(); i++)
{
printf("%5i %6i %8i %8s %20s\n",
scans[i].scanid, scans[i].cardid,
scans[i].sourceid, (scans[i].processed) ? "yes" : "no",
scans[i].scandate.toString().toAscii().constData());
}
cout<<endl;
return GENERIC_EXIT_OK;
}
if (scanImport)
{
vector<ScanInfo> scans = LoadScanList();
cout<<"*** SCAN IMPORT START ***"<<endl;
{
ScanDTVTransportList list = LoadScan(scanImport);
ChannelImporter ci(false, true, true, true, false,
scanFTAOnly, scanServiceRequirements);
ci.Process(list);
}
cout<<"*** SCAN IMPORT END ***"<<endl;
return GENERIC_EXIT_OK;
}
MythTranslation::load("mythfrontend");
QString themename = gCoreContext->GetSetting("Theme", DEFAULT_UI_THEME);
QString themedir = GetMythUI()->FindThemeDir(themename);
if (themedir.isEmpty())
{
LOG(VB_GENERAL, LOG_ERR, QString("Couldn't find theme '%1'")
.arg(themename));
return GENERIC_EXIT_NO_THEME;
}
MythMainWindow *mainWindow = GetMythMainWindow();
mainWindow->Init();
mainWindow->setWindowTitle(QObject::tr("MythTV Setup"));
// We must reload the translation after a language change and this
// also means clearing the cached/loaded theme strings, so reload the
// theme which also triggers a translation reload
if (LanguageSelection::prompt())
{
if (!reloadTheme())
return GENERIC_EXIT_NO_THEME;
}
if (!UpgradeTVDatabaseSchema(true))
{
LOG(VB_GENERAL, LOG_ERR, "Couldn't upgrade database to new schema.");
return GENERIC_EXIT_DB_OUTOFDATE;
}
// Refresh Global/Main Menu keys after DB update in case there was no DB
// when they were written originally
mainWindow->ReloadKeys();
if (!startPrompt)
startPrompt = new StartPrompter();
startPrompt->handleStart();
// Let the user select buttons, type values, scan for channels, etc.
if (!RunMenu(themedir, themename) && !resetTheme(themedir, themename))
return GENERIC_EXIT_NO_THEME;
ExpertSettingsEditor *expertEditor = NULL;
if (expertMode)
{
MythScreenStack *mainStack = GetMythMainWindow()->GetMainStack();
expertEditor =
new ExpertSettingsEditor(mainStack, "Expert Settings Editor");
if (expertEditor->Create())
mainStack->AddScreen(expertEditor);
else
{
delete expertEditor;
expertEditor = NULL;
LOG(VB_GENERAL, LOG_ERR,
"Unable to create expert settings editor window");
return GENERIC_EXIT_OK;
}
}
qApp->exec();
}
int main(int argc, char *argv[])
{
QString geometry = QString::null;
QString display = QString::null;
bool doScan = false;
bool doScanList = false;
bool doScanSaveOnly = false;
bool scanInteractive = true;
bool expertMode = false;
uint scanImport = 0;
bool scanFTAOnly = false;
ServiceRequirements scanServiceRequirements = kRequireAV;
uint scanCardId = 0;
QString scanTableName = "atsc-vsb8-us";
QString scanInputName = "";
bool use_display = true;
for(int argpos = 1; argpos < argc; ++argpos)
{
if (!strcmp(argv[argpos], "-h") ||
!strcmp(argv[argpos], "--help") ||
!strcmp(argv[argpos], "--usage"))
{
print_usage();
return GENERIC_EXIT_OK;
}
#ifdef USING_X11
// Remember any -display or -geometry argument
// which QApplication init will remove.
else if (argpos+1 < argc && !strcmp(argv[argpos],"-geometry"))
geometry = argv[argpos+1];
else if (argpos+1 < argc && !strcmp(argv[argpos],"-display"))
display = argv[argpos+1];
#endif
else if (QString(argv[argpos]).left(6) == "--scan")
{
use_display = false;
print_verbose_messages = VB_NONE;
verboseString = "";
}
}
#ifdef Q_WS_MACX
// Without this, we can't set focus to any of the CheckBoxSetting, and most
// of the MythPushButton widgets, and they don't use the themed background.
QApplication::setDesktopSettingsAware(FALSE);
#endif
QApplication a(argc, argv, use_display);
QCoreApplication::setApplicationName(MYTH_APPNAME_MYTHTV_SETUP);
QMap<QString, QString> settingsOverride;
VERBOSE(VB_IMPORTANT, QString("%1 version: %2 [%3] www.mythtv.org")
.arg(MYTH_APPNAME_MYTHTV_SETUP)
.arg(MYTH_SOURCE_PATH)
.arg(MYTH_SOURCE_VERSION));
for(int argpos = 1; argpos < a.argc(); ++argpos)
{
if (!strcmp(a.argv()[argpos],"-display") ||
!strcmp(a.argv()[argpos],"--display"))
{
if (a.argc()-1 > argpos)
{
display = a.argv()[argpos+1];
if (display.startsWith("-"))
{
cerr << "Invalid or missing argument to -display option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
else
++argpos;
}
else
{
cerr << "Missing argument to -display option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
}
else if (!strcmp(a.argv()[argpos],"-geometry") ||
!strcmp(a.argv()[argpos],"--geometry"))
{
if (a.argc()-1 > argpos)
{
geometry = a.argv()[argpos+1];
if (geometry.startsWith("-"))
{
cerr << "Invalid or missing argument to "
"-geometry option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
else
++argpos;
}
else
{
cerr << "Missing argument to -geometry option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
}
else if (!strcmp(a.argv()[argpos],"-l") ||
!strcmp(a.argv()[argpos],"--logfile"))
{
if (a.argc()-1 > argpos)
{
logfile = a.argv()[argpos+1];
if (logfile.startsWith("-"))
{
cerr << "Invalid or missing argument"
" to -l/--logfile option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
else
{
++argpos;
}
}
else
{
cerr << "Missing argument to -l/--logfile option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
}
else if (!strcmp(a.argv()[argpos],"-v") ||
!strcmp(a.argv()[argpos],"--verbose"))
{
if (a.argc()-1 > argpos)
{
if (parse_verbose_arg(a.argv()[argpos+1]) ==
GENERIC_EXIT_INVALID_CMDLINE)
return GENERIC_EXIT_INVALID_CMDLINE;
++argpos;
}
else
{
cerr << "Missing argument to -v/--verbose option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
}
else if (!strcmp(a.argv()[argpos],"-O") ||
!strcmp(a.argv()[argpos],"--override-setting"))
{
if (a.argc()-1 > argpos)
{
QString tmpArg = a.argv()[argpos+1];
if (tmpArg.startsWith("-"))
{
cerr << "Invalid or missing argument to "
"-O/--override-setting option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
QStringList pairs = tmpArg.split(",");
for (int index = 0; index < pairs.size(); ++index)
{
QStringList tokens = pairs[index].split("=");
tokens[0].replace(QRegExp("^[\"']"), "");
tokens[0].replace(QRegExp("[\"']$"), "");
tokens[1].replace(QRegExp("^[\"']"), "");
tokens[1].replace(QRegExp("[\"']$"), "");
settingsOverride[tokens[0]] = tokens[1];
}
}
else
{
cerr << "Invalid or missing argument to "
"-O/--override-setting option\n";
return GENERIC_EXIT_INVALID_CMDLINE;
}
++argpos;
}
else if (!strcmp(a.argv()[argpos],"--expert"))
{
expertMode = true;
}
else if (!strcmp(a.argv()[argpos],"--scan-list"))
{
doScanList = true;
}
else if (!strcmp(a.argv()[argpos],"--scan-import"))
{
if (a.argc()-1 > argpos)
{
QString tmpArg = a.argv()[argpos + 1];
scanImport = tmpArg.toUInt();
++argpos;
if (a.argc()-1 > argpos)
{
tmpArg = a.argv()[argpos + 1];
scanFTAOnly = tmpArg.toUInt();
++argpos;
}
if (a.argc()-1 > argpos)
{
tmpArg = a.argv()[argpos + 1];
tmpArg = tmpArg.toLower();
scanServiceRequirements = kRequireNothing;
if (tmpArg.contains("radio"))
scanServiceRequirements = kRequireAudio;
if (tmpArg.contains("tv"))
scanServiceRequirements = kRequireAV;
if (tmpArg.contains("tv+radio") ||
tmpArg.contains("radio+tv"))
scanServiceRequirements = kRequireAudio;
if (tmpArg.contains("all"))
scanServiceRequirements = kRequireNothing;
++argpos;
}
}
else
{
cerr << "Missing scan number for import, please run "
<< "--scan-list to list importable scans." << endl;
return GENERIC_EXIT_INVALID_CMDLINE;
}
}
else if (!strcmp(a.argv()[argpos],"--scan-save-only"))
{
doScanSaveOnly = true;
}
else if (!strcmp(a.argv()[argpos],"--scan-non-interactive"))
{
scanInteractive = false;
}
else if (!strcmp(a.argv()[argpos],"--scan"))
{
if (a.argc()-1 > argpos)
{
scanTableName = a.argv()[argpos + 1];
++argpos;
}
if (a.argc()-1 > argpos)
{
QString tmpArg = a.argv()[argpos + 1];
scanCardId = tmpArg.toUInt();
++argpos;
}
if (a.argc()-1 > argpos)
{
scanInputName = a.argv()[argpos + 1];
++argpos;
}
doScan = true;
}
else
{
cerr << "Invalid argument: " << a.argv()[argpos] << endl;
print_usage();
return GENERIC_EXIT_INVALID_CMDLINE;
}
}
if (logfile.size())
{
if (log_rotate(1) < 0)
cerr << "cannot open logfile; using stdout/stderr" << endl;
else
{
VERBOSE(VB_IMPORTANT, QString("%1 version: %2 [%3] www.mythtv.org")
.arg(MYTH_APPNAME_MYTHTV_SETUP)
.arg(MYTH_SOURCE_PATH)
.arg(MYTH_SOURCE_VERSION));
signal(SIGHUP, &log_rotate_handler);
}
}
if (!display.isEmpty())
{
MythUIHelper::SetX11Display(display);
}
if (!geometry.isEmpty())
{
MythUIHelper::ParseGeometryOverride(geometry);
}
gContext = new MythContext(MYTH_BINARY_VERSION);
std::auto_ptr<MythContext> contextScopeDelete(gContext);
// Override settings as early as possible to cover bootstrapped screens
// such as the language prompt
if (settingsOverride.size())
{
QMap<QString, QString>::iterator it;
for (it = settingsOverride.begin(); it != settingsOverride.end(); ++it)
{
VERBOSE(VB_IMPORTANT, QString("Setting '%1' being forced to '%2'")
.arg(it.key()).arg(*it));
gCoreContext->OverrideSettingForSession(it.key(), *it);
}
}
if (!gContext->Init(use_display)) // No Upnp, Prompt for db
{
VERBOSE(VB_IMPORTANT, "Failed to init MythContext, exiting.");
return GENERIC_EXIT_NO_MYTHCONTEXT;
}
if (!GetMythDB()->HaveSchema())
{
if (!InitializeMythSchema())
return GENERIC_EXIT_DB_ERROR;
}
if (use_display)
{
gCoreContext->SetSetting("Theme", DEFAULT_UI_THEME);
GetMythUI()->LoadQtConfig();
QString fileprefix = GetConfDir();
QDir dir(fileprefix);
if (!dir.exists())
dir.mkdir(fileprefix);
}
if (doScan)
{
bool okCardID = scanCardId;
QStringList inputnames = CardUtil::GetInputNames(scanCardId);
okCardID &= !inputnames.empty();
if (scanInputName.isEmpty())
scanInputName = CardUtil::GetDefaultInput(scanCardId);
bool okInputName = inputnames.contains(scanInputName);
doScan = (okCardID && okInputName);
if (!okCardID)
{
cerr << "You must enter a valid cardid to scan." << endl;
vector<uint> cardids = CardUtil::GetCardIDs();
if (cardids.empty())
{
cerr << "But no cards have been defined on this host"
<< endl;
return GENERIC_EXIT_INVALID_CMDLINE;
}
cerr << "Valid cards: " << endl;
for (uint i = 0; i < cardids.size(); i++)
{
fprintf(stderr, "%5i: %s %s\n",
cardids[i],
CardUtil::GetRawCardType(cardids[i])
.toAscii().constData(),
CardUtil::GetVideoDevice(cardids[i])
.toAscii().constData());
}
return GENERIC_EXIT_INVALID_CMDLINE;
}
if (!okInputName)
{
cerr << "You must enter a valid input to scan this card."
<< endl;
cerr << "Valid inputs: " << endl;
for (int i = 0; i < inputnames.size(); i++)
{
cerr << inputnames[i].toAscii().constData() << endl;
}
return GENERIC_EXIT_INVALID_CMDLINE;
}
}
if (doScan)
{
int ret = 0;
int firstBreak = scanTableName.indexOf("-");
int secondBreak = scanTableName.lastIndexOf("-");
if (!firstBreak || !secondBreak || firstBreak == secondBreak)
{
cerr << "Failed to parse the frequence table parameter "
<< scanTableName.toLocal8Bit().constData() << endl
<< "Please make sure it is in the format freq_std-"
"modulation-country." << endl;
return GENERIC_EXIT_INVALID_CMDLINE;
}
QString freq_std = scanTableName.mid(0, firstBreak).toLower();
QString mod = scanTableName.mid(
firstBreak+1, secondBreak-firstBreak-1).toLower();
QString tbl = scanTableName.mid(secondBreak+1).toLower();
uint inputid = CardUtil::GetInputID(scanCardId, scanInputName);
uint sourceid = CardUtil::GetSourceID(inputid);
QMap<QString,QString> startChan;
{
ChannelScannerCLI scanner(doScanSaveOnly, scanInteractive);
scanner.Scan(
(freq_std=="atsc") ?
ScanTypeSetting::FullScan_ATSC :
((freq_std=="dvbt") ?
ScanTypeSetting::FullScan_DVBT :
ScanTypeSetting::FullScan_ATSC),
/* cardid */ scanCardId,
/* inputname */ scanInputName,
/* sourceid */ sourceid,
/* ignore signal timeout */ false,
/* follow_nit */ true,
/* test decryption */ true,
scanFTAOnly,
scanServiceRequirements,
// stuff needed for particular scans
/* mplexid */ 0,
startChan, freq_std, mod, tbl);
ret = a.exec();
}
return (ret) ? GENERIC_EXIT_NOT_OK : GENERIC_EXIT_OK;
}
if (doScanList)
{
vector<ScanInfo> scans = LoadScanList();
cout<<" scanid cardid sourceid processed date"<<endl;
for (uint i = 0; i < scans.size(); i++)
{
printf("%5i %6i %8i %8s %20s\n",
scans[i].scanid, scans[i].cardid,
scans[i].sourceid, (scans[i].processed) ? "yes" : "no",
scans[i].scandate.toString().toAscii().constData());
}
cout<<endl;
return GENERIC_EXIT_OK;
}
if (scanImport)
{
vector<ScanInfo> scans = LoadScanList();
cout<<"*** SCAN IMPORT START ***"<<endl;
{
ScanDTVTransportList list = LoadScan(scanImport);
ChannelImporter ci(false, true, true, true, false,
scanFTAOnly, scanServiceRequirements);
ci.Process(list);
}
cout<<"*** SCAN IMPORT END ***"<<endl;
return GENERIC_EXIT_OK;
}
MythTranslation::load("mythfrontend");
QString themename = gCoreContext->GetSetting("Theme", DEFAULT_UI_THEME);
QString themedir = GetMythUI()->FindThemeDir(themename);
if (themedir.isEmpty())
{
VERBOSE(VB_IMPORTANT, QString("Couldn't find theme '%1'")
.arg(themename));
return GENERIC_EXIT_NO_THEME;
}
MythMainWindow *mainWindow = GetMythMainWindow();
mainWindow->Init();
mainWindow->setWindowTitle(QObject::tr("MythTV Setup"));
// We must reload the translation after a language change and this
// also means clearing the cached/loaded theme strings, so reload the
// theme which also triggers a translation reload
if (LanguageSelection::prompt())
{
if (!reloadTheme())
return GENERIC_EXIT_NO_THEME;
}
if (!UpgradeTVDatabaseSchema(true))
{
VERBOSE(VB_IMPORTANT, "Couldn't upgrade database to new schema.");
return GENERIC_EXIT_DB_OUTOFDATE;
}
// Refresh Global/Main Menu keys after DB update in case there was no DB
// when they were written originally
mainWindow->ResetKeys();
if (!startPrompt)
startPrompt = new StartPrompter();
startPrompt->handleStart();
// Let the user select buttons, type values, scan for channels, etc.
if (!RunMenu(themedir, themename) && !resetTheme(themedir, themename))
return GENERIC_EXIT_NO_THEME;
ExpertSettingsEditor *expertEditor = NULL;
if (expertMode)
{
MythScreenStack *mainStack = GetMythMainWindow()->GetMainStack();
expertEditor =
new ExpertSettingsEditor(mainStack, "Expert Settings Editor");
if (expertEditor->Create())
mainStack->AddScreen(expertEditor);
else
{
delete expertEditor;
expertEditor = NULL;
VERBOSE(VB_IMPORTANT, "Unable to create expert settings editor "
"window");
return GENERIC_EXIT_OK;
}
}
qApp->exec();
// Main menu callback to ExitPrompter does CheckSetup(), cleanup and exit.
}
