void IDADataset::ProcessGeoref()
{
OGRSpatialReference oSRS;
if( nProjection == 3 )
{
oSRS.SetWellKnownGeogCS( "WGS84" );
}
else if( nProjection == 4 )
{
oSRS.SetLCC( dfParallel1, dfParallel2,
dfLatCenter, dfLongCenter,
0.0, 0.0 );
oSRS.SetGeogCS( "Clarke 1866", "Clarke 1866", "Clarke 1866",
6378206.4, 293.97869821389662 );
}
else if( nProjection == 6 )
{
oSRS.SetLAEA( dfLatCenter, dfLongCenter, 0.0, 0.0 );
oSRS.SetGeogCS( "Sphere", "Sphere", "Sphere",
6370997.0, 0.0 );
}
else if( nProjection == 8 )
{
oSRS.SetACEA( dfParallel1, dfParallel2,
dfLatCenter, dfLongCenter,
0.0, 0.0 );
oSRS.SetGeogCS( "Clarke 1866", "Clarke 1866", "Clarke 1866",
6378206.4, 293.97869821389662 );
}
else if( nProjection == 9 )
{
oSRS.SetGH( dfLongCenter, 0.0, 0.0 );
oSRS.SetGeogCS( "Sphere", "Sphere", "Sphere",
6370997.0, 0.0 );
}
if( oSRS.GetRoot() != NULL )
{
CPLFree( pszProjection );
pszProjection = NULL;
oSRS.exportToWkt( &pszProjection );
}
adfGeoTransform[0] = 0 - dfDX * dfXCenter;
adfGeoTransform[1] = dfDX;
adfGeoTransform[2] = 0.0;
adfGeoTransform[3] = dfDY * dfYCenter;
adfGeoTransform[4] = 0.0;
adfGeoTransform[5] = -dfDY;
if( nProjection == 3 )
{
adfGeoTransform[0] += dfLongCenter;
adfGeoTransform[3] += dfLatCenter;
}
}
void PDSDataset::ParseSRS()
{
const char *pszFilename = GetDescription();
/* ==================================================================== */
/* Get the geotransform. */
/* ==================================================================== */
/*********** Grab Cellsize ************/
//example:
//MAP_SCALE = 14.818 <KM/PIXEL>
//added search for unit (only checks for CM, KM - defaults to Meters)
const char *value;
//Georef parameters
double dfULXMap=0.5;
double dfULYMap = 0.5;
double dfXDim = 1.0;
double dfYDim = 1.0;
double xulcenter = 0.0;
double yulcenter = 0.0;
value = GetKeyword("IMAGE_MAP_PROJECTION.MAP_SCALE");
if (strlen(value) > 0 ) {
dfXDim = atof(value);
dfYDim = atof(value) * -1;
CPLString unit = GetKeywordUnit("IMAGE_MAP_PROJECTION.MAP_SCALE",2); //KM
//value = GetKeywordUnit("IMAGE_MAP_PROJECTION.MAP_SCALE",3); //PIXEL
if((EQUAL(unit,"M")) || (EQUAL(unit,"METER")) || (EQUAL(unit,"METERS"))) {
// do nothing
}
else if (EQUAL(unit,"CM")) {
// convert from cm to m
dfXDim = dfXDim / 100.0;
dfYDim = dfYDim / 100.0;
} else {
//defaults to convert km to m
dfXDim = dfXDim * 1000.0;
dfYDim = dfYDim * 1000.0;
}
}
/* -------------------------------------------------------------------- */
/* Calculate upper left corner of pixel in meters from the */
/* upper left center pixel sample/line offsets. It doesn't */
/* mean the defaults will work for every PDS image, as these */
/* values are used inconsistantly. Thus we have included */
/* conversion options to allow the user to override the */
/* documented PDS3 default. Jan. 2011, for known mapping issues */
/* see GDAL PDS page or mapping within ISIS3 source (USGS) */
/* $ISIS3DATA/base/translations/pdsProjectionLineSampToXY.def */
/* -------------------------------------------------------------------- */
// defaults should be correct for what is documented in the PDS3 standard
double dfSampleOffset_Shift;
double dfLineOffset_Shift;
double dfSampleOffset_Mult;
double dfLineOffset_Mult;
dfSampleOffset_Shift =
atof(CPLGetConfigOption( "PDS_SampleProjOffset_Shift", "-0.5" ));
dfLineOffset_Shift =
atof(CPLGetConfigOption( "PDS_LineProjOffset_Shift", "-0.5" ));
dfSampleOffset_Mult =
atof(CPLGetConfigOption( "PDS_SampleProjOffset_Mult", "-1.0") );
dfLineOffset_Mult =
atof( CPLGetConfigOption( "PDS_LineProjOffset_Mult", "1.0") );
/*********** Grab LINE_PROJECTION_OFFSET ************/
value = GetKeyword("IMAGE_MAP_PROJECTION.LINE_PROJECTION_OFFSET");
if (strlen(value) > 0) {
yulcenter = atof(value);
dfULYMap = ((yulcenter + dfLineOffset_Shift) * -dfYDim * dfLineOffset_Mult);
//notice dfYDim is negative here which is why it is again negated here
}
/*********** Grab SAMPLE_PROJECTION_OFFSET ************/
value = GetKeyword("IMAGE_MAP_PROJECTION.SAMPLE_PROJECTION_OFFSET");
if( strlen(value) > 0 ) {
xulcenter = atof(value);
dfULXMap = ((xulcenter + dfSampleOffset_Shift) * dfXDim * dfSampleOffset_Mult);
}
/* ==================================================================== */
/* Get the coordinate system. */
/* ==================================================================== */
int bProjectionSet = TRUE;
double semi_major = 0.0;
double semi_minor = 0.0;
double iflattening = 0.0;
double center_lat = 0.0;
double center_lon = 0.0;
double first_std_parallel = 0.0;
double second_std_parallel = 0.0;
OGRSpatialReference oSRS;
/*********** Grab TARGET_NAME ************/
/**** This is the planets name i.e. MARS ***/
CPLString target_name = GetKeyword("TARGET_NAME");
CleanString( target_name );
/********** Grab MAP_PROJECTION_TYPE *****/
CPLString map_proj_name =
GetKeyword( "IMAGE_MAP_PROJECTION.MAP_PROJECTION_TYPE");
CleanString( map_proj_name );
/****** Grab semi_major & convert to KM ******/
semi_major =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.A_AXIS_RADIUS")) * 1000.0;
/****** Grab semi-minor & convert to KM ******/
semi_minor =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.C_AXIS_RADIUS")) * 1000.0;
/*********** Grab CENTER_LAT ************/
center_lat =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.CENTER_LATITUDE"));
/*********** Grab CENTER_LON ************/
center_lon =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.CENTER_LONGITUDE"));
/********** Grab 1st std parallel *******/
first_std_parallel =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.FIRST_STANDARD_PARALLEL"));
/********** Grab 2nd std parallel *******/
second_std_parallel =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.SECOND_STANDARD_PARALLEL"));
/*** grab PROJECTION_LATITUDE_TYPE = "PLANETOCENTRIC" ****/
// Need to further study how ocentric/ographic will effect the gdal library.
// So far we will use this fact to define a sphere or ellipse for some projections
// Frank - may need to talk this over
char bIsGeographic = TRUE;
value = GetKeyword("IMAGE_MAP_PROJECTION.COORDINATE_SYSTEM_NAME");
if (EQUAL( value, "PLANETOCENTRIC" ))
bIsGeographic = FALSE;
/** Set oSRS projection and parameters --- all PDS supported types added if apparently supported in oSRS
"AITOFF", ** Not supported in GDAL??
"ALBERS",
"BONNE",
"BRIESEMEISTER", ** Not supported in GDAL??
"CYLINDRICAL EQUAL AREA",
"EQUIDISTANT",
"EQUIRECTANGULAR",
"GNOMONIC",
"HAMMER", ** Not supported in GDAL??
"HENDU", ** Not supported in GDAL??
"LAMBERT AZIMUTHAL EQUAL AREA",
"LAMBERT CONFORMAL",
"MERCATOR",
"MOLLWEIDE",
"OBLIQUE CYLINDRICAL",
"ORTHOGRAPHIC",
"SIMPLE CYLINDRICAL",
"SINUSOIDAL",
"STEREOGRAPHIC",
"TRANSVERSE MERCATOR",
"VAN DER GRINTEN", ** Not supported in GDAL??
"WERNER" ** Not supported in GDAL??
**/
CPLDebug( "PDS","using projection %s\n\n", map_proj_name.c_str());
if ((EQUAL( map_proj_name, "EQUIRECTANGULAR" )) ||
(EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ) {
oSRS.SetEquirectangular2 ( 0.0, center_lon, center_lat, 0, 0 );
} else if (EQUAL( map_proj_name, "ORTHOGRAPHIC" )) {
oSRS.SetOrthographic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "SINUSOIDAL" )) {
oSRS.SetSinusoidal ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MERCATOR" )) {
oSRS.SetMercator ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "STEREOGRAPHIC" )) {
oSRS.SetStereographic ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC")) {
oSRS.SetPS ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "TRANSVERSE_MERCATOR" )) {
oSRS.SetTM ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_CONFORMAL_CONIC" )) {
oSRS.SetLCC ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_AZIMUTHAL_EQUAL_AREA" )) {
oSRS.SetLAEA( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "CYLINDRICAL_EQUAL_AREA" )) {
oSRS.SetCEA ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MOLLWEIDE" )) {
oSRS.SetMollweide ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "ALBERS" )) {
oSRS.SetACEA ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "BONNE" )) {
oSRS.SetBonne ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "GNOMONIC" )) {
oSRS.SetGnomonic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "OBLIQUE_CYLINDRICAL" )) {
// hope Swiss Oblique Cylindrical is the same
oSRS.SetSOC ( center_lat, center_lon, 0, 0 );
} else {
CPLDebug( "PDS",
"Dataset projection %s is not supported. Continuing...",
map_proj_name.c_str() );
bProjectionSet = FALSE;
}
if (bProjectionSet) {
//Create projection name, i.e. MERCATOR MARS and set as ProjCS keyword
CPLString proj_target_name = map_proj_name + " " + target_name;
oSRS.SetProjCS(proj_target_name); //set ProjCS keyword
//The geographic/geocentric name will be the same basic name as the body name
//'GCS' = Geographic/Geocentric Coordinate System
CPLString geog_name = "GCS_" + target_name;
//The datum and sphere names will be the same basic name aas the planet
CPLString datum_name = "D_" + target_name;
CPLString sphere_name = target_name; // + "_IAU_IAG"); //Might not be IAU defined so don't add
//calculate inverse flattening from major and minor axis: 1/f = a/(a-b)
if ((semi_major - semi_minor) < 0.0000001)
iflattening = 0;
else
iflattening = semi_major / (semi_major - semi_minor);
//Set the body size but take into consideration which proj is being used to help w/ compatibility
//Notice that most PDS projections are spherical based on the fact that ISIS/PICS are spherical
//Set the body size but take into consideration which proj is being used to help w/ proj4 compatibility
//The use of a Sphere, polar radius or ellipse here is based on how ISIS does it internally
if ( ( (EQUAL( map_proj_name, "STEREOGRAPHIC" ) && (fabs(center_lat) == 90)) ) ||
(EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC" )))
{
if (bIsGeographic) {
//Geograpraphic, so set an ellipse
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere using the semi-minor axis. I hope...
sphere_name += "_polarRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_minor, 0.0,
"Reference_Meridian", 0.0 );
}
}
else if ( (EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ||
(EQUAL( map_proj_name, "ORTHOGRAPHIC" )) ||
(EQUAL( map_proj_name, "STEREOGRAPHIC" )) ||
(EQUAL( map_proj_name, "SINUSOIDAL" )) ) {
//isis uses the spherical equation for these projections so force a sphere
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else if (EQUAL( map_proj_name, "EQUIRECTANGULAR" )) {
//isis uses local radius as a sphere, which is pre-calculated in the PDS label as the semi-major
sphere_name += "_localRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else {
//All other projections: Mercator, Transverse Mercator, Lambert Conformal, etc.
//Geographic, so set an ellipse
if (bIsGeographic) {
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere. I hope...
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
}
// translate back into a projection string.
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
osProjection = pszResult;
CPLFree( pszResult );
}
/* ==================================================================== */
/* Check for a .prj and world file to override the georeferencing. */
/* ==================================================================== */
{
CPLString osPath, osName;
VSILFILE *fp;
osPath = CPLGetPath( pszFilename );
osName = CPLGetBasename(pszFilename);
const char *pszPrjFile = CPLFormCIFilename( osPath, osName, "prj" );
fp = VSIFOpenL( pszPrjFile, "r" );
if( fp != NULL )
{
char **papszLines;
OGRSpatialReference oSRS;
VSIFCloseL( fp );
papszLines = CSLLoad( pszPrjFile );
if( oSRS.importFromESRI( papszLines ) == OGRERR_NONE )
{
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
osProjection = pszResult;
CPLFree( pszResult );
}
CSLDestroy( papszLines );
}
}
if( dfULYMap != 0.5 || dfULYMap != 0.5 || dfXDim != 1.0 || dfYDim != 1.0 )
{
bGotTransform = TRUE;
adfGeoTransform[0] = dfULXMap;
adfGeoTransform[1] = dfXDim;
adfGeoTransform[2] = 0.0;
adfGeoTransform[3] = dfULYMap;
adfGeoTransform[4] = 0.0;
adfGeoTransform[5] = dfYDim;
}
if( !bGotTransform )
bGotTransform =
GDALReadWorldFile( pszFilename, "psw",
adfGeoTransform );
if( !bGotTransform )
bGotTransform =
GDALReadWorldFile( pszFilename, "wld",
adfGeoTransform );
}
GDALDataset *VICARDataset::Open( GDALOpenInfo * poOpenInfo )
{
/* -------------------------------------------------------------------- */
/* Does this look like a VICAR dataset? */
/* -------------------------------------------------------------------- */
if( !Identify( poOpenInfo ) )
return NULL;
/* -------------------------------------------------------------------- */
/* Open the file using the large file API. */
/* -------------------------------------------------------------------- */
VSILFILE *fpQube = VSIFOpenL( poOpenInfo->pszFilename, "rb" );
if( fpQube == NULL )
return NULL;
VICARDataset *poDS = new VICARDataset();
if( ! poDS->oKeywords.Ingest( fpQube, poOpenInfo->pabyHeader ) ) {
VSIFCloseL( fpQube );
delete poDS;
return NULL;
}
VSIFCloseL( fpQube );
/***** CHECK ENDIANNESS **************/
const char *value = poDS->GetKeyword( "INTFMT" );
if (!EQUAL(value,"LOW") ) {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return FALSE;
}
value = poDS->GetKeyword( "REALFMT" );
if (!EQUAL(value,"RIEEE") ) {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return FALSE;
}
char chByteOrder = 'M';
value = poDS->GetKeyword( "BREALFMT" );
if (EQUAL(value,"VAX") ) {
chByteOrder = 'I';
}
/************ CHECK INSTRUMENT *****************/
/************ ONLY HRSC TESTED *****************/
bool bIsDTM = false;
value = poDS->GetKeyword( "DTM.DTM_OFFSET" );
if (!EQUAL(value,"") ) {
bIsDTM = true;
}
value = poDS->GetKeyword( "BLTYPE" );
if (!EQUAL(value,"M94_HRSC") && !bIsDTM ) {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s instrument not tested. Continue with caution!\n\n", value);
}
/*********** Grab layout type (BSQ, BIP, BIL) ************/
char szLayout[10] = "BSQ"; //default to band seq.
value = poDS->GetKeyword( "ORG" );
if (!EQUAL(value,"BSQ") )
{
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return FALSE;
}
strcpy(szLayout,"BSQ");
const int nCols = atoi(poDS->GetKeyword("NS"));
const int nRows = atoi(poDS->GetKeyword("NL"));
const int nBands = atoi(poDS->GetKeyword("NB"));
/*********** Grab record bytes **********/
int nSkipBytes = atoi(poDS->GetKeyword("NBB"));
GDALDataType eDataType = GDT_Byte;
double dfNoData = 0.0;
if (EQUAL( poDS->GetKeyword( "FORMAT" ), "BYTE" )) {
eDataType = GDT_Byte;
dfNoData = NULL1;
}
else if (EQUAL( poDS->GetKeyword( "FORMAT" ), "HALF" )) {
eDataType = GDT_Int16;
dfNoData = NULL2;
chByteOrder = 'I';
}
else if (EQUAL( poDS->GetKeyword( "FORMAT" ), "FULL" )) {
eDataType = GDT_UInt32;
dfNoData = 0;
}
else if (EQUAL( poDS->GetKeyword( "FORMAT" ), "REAL" )) {
eDataType = GDT_Float32;
dfNoData = NULL3;
chByteOrder = 'I';
}
else {
CPLError( CE_Failure, CPLE_AppDefined,
"Could not find known VICAR label entries!\n");
delete poDS;
return NULL;
}
if( nRows < 1 || nCols < 1 || nBands < 1 )
{
CPLError( CE_Failure, CPLE_AppDefined,
"File %s appears to be a VICAR file, but failed to find some "
"required keywords.",
poDS->GetDescription() );
return FALSE;
}
/* -------------------------------------------------------------------- */
/* Capture some information from the file that is of interest. */
/* -------------------------------------------------------------------- */
poDS->nRasterXSize = nCols;
poDS->nRasterYSize = nRows;
double dfULXMap=0.5;
double dfULYMap = 0.5;
double dfXDim = 1.0;
double dfYDim = 1.0;
double xulcenter = 0.0;
double yulcenter = 0.0;
value = poDS->GetKeyword("MAP.MAP_SCALE");
if (strlen(value) > 0 ) {
dfXDim = CPLAtof(value);
dfYDim = CPLAtof(value) * -1;
dfXDim = dfXDim * 1000.0;
dfYDim = dfYDim * 1000.0;
}
double dfSampleOffset_Shift =
CPLAtof(CPLGetConfigOption( "PDS_SampleProjOffset_Shift", "-0.5" ));
double dfLineOffset_Shift =
CPLAtof(CPLGetConfigOption( "PDS_LineProjOffset_Shift", "-0.5" ));
double dfSampleOffset_Mult =
CPLAtof(CPLGetConfigOption( "PDS_SampleProjOffset_Mult", "-1.0") );
double dfLineOffset_Mult =
CPLAtof( CPLGetConfigOption( "PDS_LineProjOffset_Mult", "1.0") );
/*********** Grab LINE_PROJECTION_OFFSET ************/
value = poDS->GetKeyword("MAP.LINE_PROJECTION_OFFSET");
if (strlen(value) > 0) {
yulcenter = CPLAtof(value);
dfULYMap = ((yulcenter + dfLineOffset_Shift) * -dfYDim * dfLineOffset_Mult);
}
/*********** Grab SAMPLE_PROJECTION_OFFSET ************/
value = poDS->GetKeyword("MAP.SAMPLE_PROJECTION_OFFSET");
if( strlen(value) > 0 ) {
xulcenter = CPLAtof(value);
dfULXMap = ((xulcenter + dfSampleOffset_Shift) * dfXDim * dfSampleOffset_Mult);
}
/* ==================================================================== */
/* Get the coordinate system. */
/* ==================================================================== */
bool bProjectionSet = true;
/*********** Grab TARGET_NAME ************/
/**** This is the planets name i.e. MARS ***/
const CPLString target_name = poDS->GetKeyword("MAP.TARGET_NAME");
/********** Grab MAP_PROJECTION_TYPE *****/
const CPLString map_proj_name
= poDS->GetKeyword( "MAP.MAP_PROJECTION_TYPE");
/****** Grab semi_major & convert to KM ******/
const double semi_major
= CPLAtof(poDS->GetKeyword( "MAP.A_AXIS_RADIUS")) * 1000.0;
/****** Grab semi-minor & convert to KM ******/
const double semi_minor
= CPLAtof(poDS->GetKeyword( "MAP.C_AXIS_RADIUS")) * 1000.0;
/*********** Grab CENTER_LAT ************/
const double center_lat =
CPLAtof(poDS->GetKeyword( "MAP.CENTER_LATITUDE"));
/*********** Grab CENTER_LON ************/
const double center_lon
= CPLAtof(poDS->GetKeyword( "MAP.CENTER_LONGITUDE"));
/********** Grab 1st std parallel *******/
const double first_std_parallel =
CPLAtof(poDS->GetKeyword( "MAP.FIRST_STANDARD_PARALLEL"));
/********** Grab 2nd std parallel *******/
const double second_std_parallel =
CPLAtof(poDS->GetKeyword( "MAP.SECOND_STANDARD_PARALLEL"));
/*** grab PROJECTION_LATITUDE_TYPE = "PLANETOCENTRIC" ****/
// Need to further study how ocentric/ographic will effect the gdal library.
// So far we will use this fact to define a sphere or ellipse for some projections
// Frank - may need to talk this over
bool bIsGeographic = true;
value = poDS->GetKeyword("MAP.COORDINATE_SYSTEM_NAME");
if (EQUAL( value, "PLANETOCENTRIC" ))
bIsGeographic = false;
/** Set oSRS projection and parameters --- all PDS supported types added if apparently supported in oSRS
"AITOFF", ** Not supported in GDAL??
"ALBERS",
"BONNE",
"BRIESEMEISTER", ** Not supported in GDAL??
"CYLINDRICAL EQUAL AREA",
"EQUIDISTANT",
"EQUIRECTANGULAR",
"GNOMONIC",
"HAMMER", ** Not supported in GDAL??
"HENDU", ** Not supported in GDAL??
"LAMBERT AZIMUTHAL EQUAL AREA",
"LAMBERT CONFORMAL",
"MERCATOR",
"MOLLWEIDE",
"OBLIQUE CYLINDRICAL",
"ORTHOGRAPHIC",
"SIMPLE CYLINDRICAL",
"SINUSOIDAL",
"STEREOGRAPHIC",
"TRANSVERSE MERCATOR",
"VAN DER GRINTEN", ** Not supported in GDAL??
"WERNER" ** Not supported in GDAL??
**/
CPLDebug( "PDS", "using projection %s\n\n", map_proj_name.c_str());
OGRSpatialReference oSRS;
if ((EQUAL( map_proj_name, "EQUIRECTANGULAR" )) ||
(EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ) {
oSRS.SetEquirectangular2 ( 0.0, center_lon, center_lat, 0, 0 );
} else if (EQUAL( map_proj_name, "ORTHOGRAPHIC" )) {
oSRS.SetOrthographic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "SINUSOIDAL" )) {
oSRS.SetSinusoidal ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MERCATOR" )) {
oSRS.SetMercator ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "STEREOGRAPHIC" )) {
oSRS.SetStereographic ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC")) {
oSRS.SetPS ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "TRANSVERSE_MERCATOR" )) {
oSRS.SetTM ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_CONFORMAL_CONIC" )) {
oSRS.SetLCC ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_AZIMUTHAL_EQUAL_AREA" )) {
oSRS.SetLAEA( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "CYLINDRICAL_EQUAL_AREA" )) {
oSRS.SetCEA ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MOLLWEIDE" )) {
oSRS.SetMollweide ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "ALBERS" )) {
oSRS.SetACEA ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "BONNE" )) {
oSRS.SetBonne ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "GNOMONIC" )) {
oSRS.SetGnomonic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "OBLIQUE_CYLINDRICAL" )) {
// hope Swiss Oblique Cylindrical is the same
oSRS.SetSOC ( center_lat, center_lon, 0, 0 );
} else {
CPLDebug( "VICAR",
"Dataset projection %s is not supported. Continuing...",
map_proj_name.c_str() );
bProjectionSet = false;
}
if (bProjectionSet) {
//Create projection name, i.e. MERCATOR MARS and set as ProjCS keyword
CPLString proj_target_name = map_proj_name + " " + target_name;
oSRS.SetProjCS(proj_target_name); //set ProjCS keyword
//The geographic/geocentric name will be the same basic name as the body name
//'GCS' = Geographic/Geocentric Coordinate System
CPLString geog_name = "GCS_" + target_name;
//The datum and sphere names will be the same basic name aas the planet
CPLString datum_name = "D_" + target_name;
CPLString sphere_name = target_name; // + "_IAU_IAG"); //Might not be IAU defined so don't add
//calculate inverse flattening from major and minor axis: 1/f = a/(a-b)
double iflattening = 0.0;
if ((semi_major - semi_minor) < 0.0000001)
iflattening = 0;
else
iflattening = semi_major / (semi_major - semi_minor);
//Set the body size but take into consideration which proj is being used to help w/ compatibility
//Notice that most PDS projections are spherical based on the fact that ISIS/PICS are spherical
//Set the body size but take into consideration which proj is being used to help w/ proj4 compatibility
//The use of a Sphere, polar radius or ellipse here is based on how ISIS does it internally
if ( ( (EQUAL( map_proj_name, "STEREOGRAPHIC" ) && (fabs(center_lat) == 90)) ) ||
(EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC" )))
{
if (bIsGeographic) {
//Geograpraphic, so set an ellipse
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere using the semi-minor axis. I hope...
sphere_name += "_polarRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_minor, 0.0,
"Reference_Meridian", 0.0 );
}
}
else if ( (EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ||
(EQUAL( map_proj_name, "ORTHOGRAPHIC" )) ||
(EQUAL( map_proj_name, "STEREOGRAPHIC" )) ||
(EQUAL( map_proj_name, "SINUSOIDAL" )) ) {
//isis uses the spherical equation for these projections so force a sphere
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else if (EQUAL( map_proj_name, "EQUIRECTANGULAR" )) {
//isis uses local radius as a sphere, which is pre-calculated in the PDS label as the semi-major
sphere_name += "_localRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else
{
//All other projections: Mercator, Transverse Mercator, Lambert Conformal, etc.
//Geographic, so set an ellipse
if (bIsGeographic) {
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
}
else
{
//Geocentric, so force a sphere. I hope...
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
}
// translate back into a projection string.
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
poDS->osProjection = pszResult;
CPLFree( pszResult );
}
{
poDS->bGotTransform = TRUE;
poDS->adfGeoTransform[0] = dfULXMap;
poDS->adfGeoTransform[1] = dfXDim;
poDS->adfGeoTransform[2] = 0.0;
poDS->adfGeoTransform[3] = dfULYMap;
poDS->adfGeoTransform[4] = 0.0;
poDS->adfGeoTransform[5] = dfYDim;
}
CPLString osQubeFile = poOpenInfo->pszFilename;
if( !poDS->bGotTransform )
poDS->bGotTransform =
GDALReadWorldFile( osQubeFile, "psw",
poDS->adfGeoTransform );
if( !poDS->bGotTransform )
poDS->bGotTransform =
GDALReadWorldFile( osQubeFile, "wld",
poDS->adfGeoTransform );
/* -------------------------------------------------------------------- */
/* Open target binary file. */
/* -------------------------------------------------------------------- */
if( poOpenInfo->eAccess == GA_ReadOnly )
poDS->fpImage = VSIFOpenL( osQubeFile, "r" );
else
poDS->fpImage = VSIFOpenL( osQubeFile, "r+" );
if( poDS->fpImage == NULL )
{
CPLError( CE_Failure, CPLE_OpenFailed,
"Failed to open %s with write permission.\n%s",
osQubeFile.c_str(),
VSIStrerror( errno ) );
delete poDS;
return NULL;
}
poDS->eAccess = poOpenInfo->eAccess;
/* -------------------------------------------------------------------- */
/* Compute the line offsets. */
/* -------------------------------------------------------------------- */
const long int nItemSize = GDALGetDataTypeSize(eDataType)/8;
const long int nPixelOffset = nItemSize;
const long int nLineOffset = nPixelOffset * nCols + atoi(poDS->GetKeyword("NBB")) ;
const long int nBandOffset = nLineOffset * nRows;
nSkipBytes = atoi(poDS->GetKeyword("LBLSIZE"));
/* -------------------------------------------------------------------- */
/* Create band information objects. */
/* -------------------------------------------------------------------- */
for( int i = 0; i < nBands; i++ )
{
GDALRasterBand *poBand
= new RawRasterBand( poDS, i+1, poDS->fpImage, nSkipBytes + nBandOffset * i,
nPixelOffset, nLineOffset, eDataType,
#ifdef CPL_LSB
chByteOrder == 'I' || chByteOrder == 'L',
#else
chByteOrder == 'M',
#endif
TRUE );
poDS->SetBand( i+1, poBand );
poBand->SetNoDataValue( dfNoData );
if (bIsDTM) {
poBand->SetScale( (double) CPLAtof(poDS->GetKeyword( "DTM.DTM_SCALING_FACTOR") ) );
poBand->SetOffset( (double) CPLAtof(poDS->GetKeyword( "DTM.DTM_OFFSET") ) );
const char* pszMin = poDS->GetKeyword( "DTM.DTM_MINIMUM_DN", NULL );
const char* pszMax = poDS->GetKeyword( "DTM.DTM_MAXIMUM_DN", NULL );
if (pszMin != NULL && pszMax != NULL )
poBand->SetStatistics(CPLAtofM(pszMin),CPLAtofM(pszMax),0,0);
const char* pszNoData = poDS->GetKeyword( "DTM.DTM_MISSING_DN", NULL );
if (pszNoData != NULL )
poBand->SetNoDataValue( CPLAtofM(pszNoData) );
} else if (EQUAL( poDS->GetKeyword( "BLTYPE"), "M94_HRSC" )) {
float scale=CPLAtof(poDS->GetKeyword("DLRTO8.REFLECTANCE_SCALING_FACTOR","-1."));
if (scale < 0.) {
scale = CPLAtof(poDS->GetKeyword( "HRCAL.REFLECTANCE_SCALING_FACTOR","1."));
}
poBand->SetScale( scale );
float offset=CPLAtof(poDS->GetKeyword("DLRTO8.REFLECTANCE_OFFSET","-1."));
if (offset < 0.) {
offset = CPLAtof(poDS->GetKeyword( "HRCAL.REFLECTANCE_OFFSET","0."));
}
poBand->SetOffset( offset );
}
const char* pszMin = poDS->GetKeyword( "STATISTICS.MINIMUM", NULL );
const char* pszMax = poDS->GetKeyword( "STATISTICS.MAXIMUM", NULL );
const char* pszMean = poDS->GetKeyword( "STATISTICS.MEAN", NULL );
const char* pszStdDev = poDS->GetKeyword( "STATISTICS.STANDARD_DEVIATION", NULL );
if (pszMin != NULL && pszMax != NULL && pszMean != NULL && pszStdDev != NULL )
poBand->SetStatistics(CPLAtofM(pszMin),CPLAtofM(pszMax),CPLAtofM(pszMean),CPLAtofM(pszStdDev));
}
/* -------------------------------------------------------------------- */
/* Instrument-specific keywords as metadata. */
/* -------------------------------------------------------------------- */
/****************** HRSC ******************************/
if (EQUAL( poDS->GetKeyword( "BLTYPE"), "M94_HRSC" ) ) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", poDS->GetKeyword( "M94_INSTRUMENT.INSTRUMENT_HOST_NAME") );
poDS->SetMetadataItem( "PRODUCT_TYPE", poDS->GetKeyword( "TYPE"));
if (EQUAL( poDS->GetKeyword( "M94_INSTRUMENT.DETECTOR_ID"), "MEX_HRSC_SRC" )) {
static const char *apszKeywords[] = {
"M94_ORBIT.IMAGE_TIME",
"FILE.EVENT_TYPE",
"FILE.PROCESSING_LEVEL_ID",
"M94_INSTRUMENT.DETECTOR_ID",
"M94_CAMERAS.EXPOSURE_DURATION",
"HRCONVER.INSTRUMENT_TEMPERATURE", NULL
};
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
} else {
static const char *apszKeywords[] = {
"M94_ORBIT.START_TIME", "M94_ORBIT.STOP_TIME",
"M94_INSTRUMENT.DETECTOR_ID",
"M94_CAMERAS.MACROPIXEL_SIZE",
"FILE.EVENT_TYPE",
"M94_INSTRUMENT.MISSION_PHASE_NAME",
"HRORTHO.SPICE_FILE_NAME",
"HRCONVER.MISSING_FRAMES", "HRCONVER.OVERFLOW_FRAMES", "HRCONVER.ERROR_FRAMES",
"HRFOOT.BEST_GROUND_SAMPLING_DISTANCE",
"DLRTO8.RADIANCE_SCALING_FACTOR", "DLRTO8.RADIANCE_OFFSET",
"DLRTO8.REFLECTANCE_SCALING_FACTOR", "DLRTO8.REFLECTANCE_OFFSET",
"HRCAL.RADIANCE_SCALING_FACTOR", "HRCAL.RADIANCE_OFFSET",
"HRCAL.REFLECTANCE_SCALING_FACTOR", "HRCAL.REFLECTANCE_OFFSET",
"HRORTHO.DTM_NAME", "HRORTHO.EXTORI_FILE_NAME", "HRORTHO.GEOMETRIC_CALIB_FILE_NAME",
NULL
};
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i], NULL );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
}
if (bIsDTM && EQUAL( poDS->GetKeyword( "MAP.TARGET_NAME"), "MARS" )) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", "MARS_EXPRESS" );
poDS->SetMetadataItem( "PRODUCT_TYPE", "DTM");
static const char *apszKeywords[] = {
"DTM.DTM_MISSING_DN", "DTM.DTM_OFFSET", "DTM.DTM_SCALING_FACTOR", "DTM.DTM_A_AXIS_RADIUS",
"DTM.DTM_B_AXIS_RADIUS", "DTM.DTM_C_AXIS_RADIUS", "DTM.DTM_DESC", "DTM.DTM_MINIMUM_DN",
"DTM.DTM_MAXIMUM_DN", NULL };
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
/****************** DAWN ******************************/
else if (EQUAL( poDS->GetKeyword( "INSTRUMENT_ID"), "FC2" )) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", "DAWN" );
static const char *apszKeywords[] = {"ORBIT_NUMBER","FILTER_NUMBER",
"FRONT_DOOR_STATUS",
"FIRST_LINE",
"FIRST_LINE_SAMPLE",
"PRODUCER_INSTITUTION_NAME",
"SOURCE_FILE_NAME",
"PROCESSING_LEVEL_ID",
"TARGET_NAME",
"LIMB_IN_IMAGE",
"POLE_IN_IMAGE",
"REFLECTANCE_SCALING_FACTOR",
"SPICE_FILE_NAME",
"SPACECRAFT_CENTRIC_LATITUDE",
"SPACECRAFT_EASTERN_LONGITUDE",
"FOOTPRINT_POSITIVE_LONGITUDE",
NULL };
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
else if (bIsDTM && EQUAL( poDS->GetKeyword( "TARGET_NAME"), "VESTA" )) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", "DAWN" );
poDS->SetMetadataItem( "PRODUCT_TYPE", "DTM");
static const char *apszKeywords[] = {
"DTM_MISSING_DN", "DTM_OFFSET", "DTM_SCALING_FACTOR", "DTM_A_AXIS_RADIUS",
"DTM_B_AXIS_RADIUS", "DTM_C_AXIS_RADIUS", "DTM_MINIMUM_DN",
"DTM_MAXIMUM_DN", "MAP_PROJECTION_TYPE", "COORDINATE_SYSTEM_NAME",
"POSITIVE_LONGITUDE_DIRECTION", "MAP_SCALE",
"CENTER_LONGITUDE", "LINE_PROJECTION_OFFSET", "SAMPLE_PROJECTION_OFFSET",
NULL };
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
/* -------------------------------------------------------------------- */
/* END Instrument-specific keywords as metadata. */
/* -------------------------------------------------------------------- */
if (EQUAL(poDS->GetKeyword( "EOL"), "1" ))
poDS->SetMetadataItem( "END-OF-DATASET_LABEL", "PRESENT" );
poDS->SetMetadataItem( "CONVERSION_DETAILS", "http://www.lpi.usra.edu/meetings/lpsc2014/pdf/1088.pdf" );
/* -------------------------------------------------------------------- */
/* Initialize any PAM information. */
/* -------------------------------------------------------------------- */
poDS->TryLoadXML();
/* -------------------------------------------------------------------- */
/* Check for overviews. */
/* -------------------------------------------------------------------- */
poDS->oOvManager.Initialize( poDS, poOpenInfo->pszFilename );
return( poDS );
}
IRaster* ingestGDALRaster()
{
GDALDataset* ds = gdalDataset;
cout << "Reading raster metadata...";
GDALRasterBand* band = ds->GetRasterBand(bandNum);
int xSize = band->GetXSize();
int ySize = band->GetYSize();
int hasNoDataValue;
double noDataValue = band->GetNoDataValue(&hasNoDataValue);
if (hasNoDataValue != 0)
noDataValue = NULL_DOUBLE_;
double xForm[6];
ds->GetGeoTransform(xForm);
double minX = xForm[0];
double cellSizeX = xForm[1];
double skewX = xForm[2];
double minY = xForm[3];
double skewY = xForm[4];
double cellSizeY = xForm[5];
string* spatialRef = new string(ds->GetProjectionRef());
if( ds->GetMetadataItem("NC_GLOBAL#IOAPI_VERSION", "") != NULL) {
// Get georeference from IOAPI metadata
// See: http://www.baronams.com/products/ioapi/GRIDS.html#horiz
// Build the affine transform from metadata
minX = atof(ds->GetMetadataItem("NC_GLOBAL#XORIG", ""));
minY = atof(ds->GetMetadataItem("NC_GLOBAL#YORIG", ""));
cellSizeX = atof(ds->GetMetadataItem("NC_GLOBAL#XCELL", ""));
cellSizeY = atof(ds->GetMetadataItem("NC_GLOBAL#YCELL", ""));
skewX = 0;
skewY = 0;
// Build the SpatialReference
double xcent, ycent, p_alp, p_bet, p_gam;
char *gdnam;
OGRSpatialReference* sref = new OGRSpatialReference("");
// Assume datum is WGS84 (may not be, but IO/API files don't (can't?) say...)
sref->SetWellKnownGeogCS("WGS84");
int gdtyp = atoi(ds->GetMetadataItem("NC_GLOBAL#GDTYP", ""));
switch(gdtyp) {
case 0:
// Unknown projection (we assume lat-lon)
break;
case 1:
// LATGRD3 -- Latitude/longitude
break;
case 2:
// LAMGRD3 -- Lambert Conformal Conic (two standard parallels)
xcent = atof(ds->GetMetadataItem("NC_GLOBAL#XCENT", ""));
ycent = atof(ds->GetMetadataItem("NC_GLOBAL#YCENT", ""));
p_alp = atof(ds->GetMetadataItem("NC_GLOBAL#P_ALP", ""));
p_bet = atof(ds->GetMetadataItem("NC_GLOBAL#P_BET", ""));
sref->SetLCC(p_alp, p_bet, ycent, xcent, 0, 0);
gdnam = (char *)ds->GetMetadataItem("NC_GLOBAL#GDNAM", "");
sref->SetProjCS(gdnam);
break;
case 9:
// ALBGRD3 -- Albers Equal-Area Conic
xcent = atof(ds->GetMetadataItem("NC_GLOBAL#XCENT", ""));
ycent = atof(ds->GetMetadataItem("NC_GLOBAL#YCENT", ""));
p_alp = atof(ds->GetMetadataItem("NC_GLOBAL#P_ALP", ""));
p_bet = atof(ds->GetMetadataItem("NC_GLOBAL#P_BET", ""));
sref->SetACEA(p_alp, p_bet, ycent, xcent, 0, 0);
gdnam = (char *)ds->GetMetadataItem("NC_GLOBAL#GDNAM", "");
sref->SetProjCS(gdnam);
break;
case 10:
// LEQGRID3 -- Lambert Azimuthal Equal-Area
p_alp = atof(ds->GetMetadataItem("NC_GLOBAL#P_ALP", ""));
// Correct for bad metadata on some files
if(p_alp == 0.0) {
xcent = atof(ds->GetMetadataItem("NC_GLOBAL#XCENT", ""));
ycent = atof(ds->GetMetadataItem("NC_GLOBAL#YCENT", ""));
p_alp = ycent;
p_gam = xcent;
} else {
p_gam = atof(ds->GetMetadataItem("NC_GLOBAL#P_GAM", ""));
}
sref->SetLAEA(p_alp, p_gam, 0, 0);
gdnam = (char *)ds->GetMetadataItem("NC_GLOBAL#GDNAM", "");
sref->SetProjCS(gdnam);
break;
default:
throw new runtime_error("ERROR: Unable to parse IO/API GDTYP variable");
}
char* wktSrStr = new char[spatialRef->length()];
strcpy((char *)spatialRef->c_str(), wktSrStr);
sref->exportToWkt(&wktSrStr);
//CPLFree(sref);
spatialRef->assign(wktSrStr);
}
cout << "...Done.\nReading raster band " << bandNum << "...";
IRaster* result = NULL;
CPLErr retval;
switch (band->GetRasterDataType()) {
//retval = band->RasterIO(GF_Read, 0, 0, band->XSize, band->YSize, floatArray, band->XSize, band->YSize, 0, 0);
case GDT_Float32: {
float* floatArray = new float[xSize * ySize];
retval = band->RasterIO(GF_Read, 0, 0, xSize, ySize, floatArray, xSize, ySize, band->GetRasterDataType(), 0, 0);
if (retval != CE_None)
throw new runtime_error("GDALRasterBand::ReadBlock() returned error");
result = new Raster<float>(floatArray, xSize, ySize, cellSizeX, cellSizeY, minX, minY, skewX, skewY, spatialRef, noDataValue);
cout << " -- Pixel type: Float32 -- ...Done\n";
} break;
case GDT_Float64: {
double* doubleArray = new double[xSize * ySize];
retval = band->RasterIO(GF_Read, 0, 0, xSize, ySize, doubleArray, xSize, ySize, band->GetRasterDataType(), 0, 0);
if (retval != CE_None)
throw new runtime_error("GDALRasterBand::ReadBlock() returned error");
result = new Raster<double>(doubleArray, xSize, ySize, cellSizeX, cellSizeY, minX, minY, skewX, skewY, spatialRef, noDataValue);
cout << " -- Pixel type: Float64 -- ...Done\n";
} break;
case GDT_Int32: {
int* intArray = new int[xSize * ySize];
retval = band->RasterIO(GF_Read, 0, 0, xSize, ySize, intArray, xSize, ySize, band->GetRasterDataType(), 0, 0);
if (retval != CE_None)
throw new runtime_error("GDALRasterBand::ReadBlock() returned error");
result = new Raster<int>(intArray, xSize, ySize, cellSizeX, cellSizeY, minX, minY, skewX, skewY, spatialRef, noDataValue);
cout << " -- Pixel type: Int32 -- ...Done\n";
} break;
case GDT_Int16: {
short* shortArray = new short[xSize * ySize];
retval = band->RasterIO(GF_Read, 0, 0, xSize, ySize, shortArray, xSize, ySize, band->GetRasterDataType(), 0, 0);
if (retval != CE_None)
throw new runtime_error("GDALRasterBand::ReadBlock() returned error");
result = new Raster<short>(shortArray, xSize, ySize, cellSizeX, cellSizeY, minX, minY, skewX, skewY, spatialRef, noDataValue);
cout << " -- Pixel type: Int32 -- ...Done\n";
} break;
case GDT_Byte: {
char* byteArray = new char[xSize * ySize];
retval = band->RasterIO(GF_Read, 0, 0, xSize, ySize, byteArray, xSize, ySize, band->GetRasterDataType(), 0, 0);
if (retval != CE_None)
throw new runtime_error("GDALRasterBand::ReadBlock() returned error");
result = new Raster<char>(byteArray, xSize, ySize, cellSizeX, cellSizeY, minX, minY, skewX, skewY, spatialRef, noDataValue);
cout << " -- Pixel type: Byte -- ...Done\n";
} break;
default:
throw new runtime_error("Unsupported pixel type");
}
return result;
}