int ON_BrepExtrudeVertex(
ON_Brep& brep,
int vertex_index,
const ON_Curve& path_curve
)
{
ON_3dVector path_vector;
if ( vertex_index < 0 && vertex_index >= brep.m_V.Count() )
return false;
if ( !ON_BrepExtrudeHelper_CheckPathCurve(path_curve,path_vector) )
return false;
ON_Curve* c3 = path_curve.Duplicate();
brep.m_V.Reserve( brep.m_V.Count() + 1 );
ON_BrepVertex& v0 = brep.m_V[vertex_index];
ON_BrepVertex& v1 = brep.NewVertex( v0.point + path_vector, 0.0 );
c3->Translate( v0.point - c3->PointAtStart() );
int c3i = brep.AddEdgeCurve( c3 );
ON_BrepEdge& edge = brep.NewEdge( v0, v1, c3i );
edge.m_tolerance = 0.0;
return true;
}
static
bool SplitSeam( ON_Brep& brep,
ON_BrepTrim& trimA, ON_BrepTrim& trimB,
ON_BrepTrim& prevtrimB,
ON_BrepTrim& nexttrimB,
int vcount0 // number of verts before singular fixups
)
{
if ( trimA.m_trim_index == trimB.m_trim_index )
return false;
if ( trimA.m_trim_index == prevtrimB.m_trim_index )
return false;
if ( trimA.m_trim_index == nexttrimB.m_trim_index )
return false;
if ( trimB.m_trim_index == prevtrimB.m_trim_index )
return false;
if ( trimB.m_trim_index == nexttrimB.m_trim_index )
return false;
if ( prevtrimB.m_trim_index == nexttrimB.m_trim_index )
return false;
if ( trimA.m_type != ON_BrepTrim::seam )
return false;
if ( trimB.m_type != ON_BrepTrim::seam )
return false;
if ( trimA.m_ei != trimB.m_ei )
return false;
if ( trimA.m_vi[0] != trimB.m_vi[1]
&& trimA.m_vi[0] < vcount0
&& trimB.m_vi[1] < vcount0 )
return false;
if ( trimA.m_vi[1] != trimB.m_vi[0]
&& trimA.m_vi[1] < vcount0
&& trimB.m_vi[0] < vcount0 )
return false;
if ( prevtrimB.m_vi[1] != trimB.m_vi[0]
&& prevtrimB.m_vi[1] < vcount0
&& trimB.m_vi[0] < vcount0 )
return false;
if ( nexttrimB.m_vi[0] != trimB.m_vi[1]
&& prevtrimB.m_vi[0] < vcount0
&& trimB.m_vi[1] < vcount0 )
return false;
if ( trimA.m_li != trimB.m_li )
return false;
if ( trimA.m_li != prevtrimB.m_li )
return false;
if ( trimA.m_li != nexttrimB.m_li )
return false;
if ( trimA.m_bRev3d == trimB.m_bRev3d )
return false;
const ON_Surface* srf = trimA.SurfaceOf();
if ( 0 == srf )
return false;
ON_BrepEdge* edgeA = brep.Edge(trimA.m_ei);
if ( 0 == edgeA )
return false;
if ( edgeA->m_ti.Count() != 2 )
return false;
if ( edgeA->m_ti[0] != trimA.m_trim_index && edgeA->m_ti[1] != trimA.m_trim_index )
return false;
if ( edgeA->m_ti[0] != trimB.m_trim_index && edgeA->m_ti[1] != trimB.m_trim_index )
return false;
// reserve space now so the vA0 and vA1 pointers
// will be valid if m_V[] is grown.
brep.m_V.Reserve( brep.m_V.Count()+2 );
ON_BrepVertex* vA0 = brep.Vertex(trimA.m_vi[0]);
if ( 0 == vA0 )
return false;
ON_BrepVertex* vA1 = brep.Vertex(trimA.m_vi[1]);
if ( 0 == vA1 )
return false;
// looks like we have a valid seam to blow apart
// get a new 3d curve for trimB
ON_Curve* cB3 = PushUpIsoTrim( brep, trimB );
if ( 0 == cB3 )
return false;
int c3i = brep.AddEdgeCurve(cB3);
vA0->m_tolerance = ON_UNSET_VALUE;
vA1->m_tolerance = ON_UNSET_VALUE;
// make new vertices for trimB
ON_BrepVertex* vB0 = 0;
ON_BrepVertex* vB1 = 0;
ON_3dPoint PA, PB;
bool bSame = false;
if (brep.GetTrim3dStart(trimB.m_trim_index, PB) && brep.GetTrim3dEnd(trimA.m_trim_index, PA))
bSame = PB.DistanceTo(PA) < ON_ZERO_TOLERANCE;
if (bSame || trimB.m_vi[0] != trimA.m_vi[1] )
{
// sing fixups have already blown apart this end
vB0 = brep.Vertex( trimB.m_vi[0] );
}
bSame = false;
if (brep.GetTrim3dStart(trimA.m_trim_index, PA) && brep.GetTrim3dEnd(trimB.m_trim_index, PB))
bSame = PB.DistanceTo(PA) < ON_ZERO_TOLERANCE;
if (bSame || trimB.m_vi[1] != trimA.m_vi[0] )
{
// sing fixups have already blown apart this end
vB1 = brep.Vertex( trimB.m_vi[1] );
}
if ( 0 == vB0 )
{
ON_BrepVertex& v = brep.NewVertex();
vB0 = &v;
trimB.m_vi[0] = vB0->m_vertex_index;
}
if ( 0 == vB1 )
{
ON_BrepVertex& v = brep.NewVertex();
vB1 = &v;
trimB.m_vi[1] = vB1->m_vertex_index;
}
// disconnect edgeA and trimB
trimB.m_ei = -1;
if ( edgeA->m_ti[0] == trimB.m_trim_index )
edgeA->m_ti.Remove(0);
else if ( edgeA->m_ti[1] == trimB.m_trim_index )
edgeA->m_ti.Remove(1);
ChangeTrimVertex( brep, trimB, 0, vA1->m_vertex_index, vB0->m_vertex_index, true, true );
ChangeTrimVertex( brep, trimB, 1, vA0->m_vertex_index, vB1->m_vertex_index, true, true );
ChangeTrimVertex( brep, prevtrimB, 1, vA1->m_vertex_index, vB0->m_vertex_index, true, true );
ChangeTrimVertex( brep, nexttrimB, 0, vA0->m_vertex_index, vB1->m_vertex_index, true, true );
// make a new edgeB and connect it to trimB
ON_BrepEdge& edgeB = brep.NewEdge( *vB0, *vB1, c3i );
edgeA = 0; // pointer may be invalid after m_E[] grows
edgeB.m_ti.Append(trimB.m_trim_index);
trimB.m_ei = edgeB.m_edge_index;
trimB.m_bRev3d = false;
trimA.m_type = ON_BrepTrim::boundary;
trimB.m_type = ON_BrepTrim::boundary;
return true;
}
static
bool ChangeTrimSingToBdry( ON_Brep& brep, ON_BrepTrim& trim, ON_BrepTrim* nexttrim )
{
if ( trim.m_vi[0] != trim.m_vi[1] )
return false;
if ( trim.m_type != ON_BrepTrim::singular )
return false;
if ( trim.m_ei >= 0 )
return false;
const ON_Surface* srf = trim.SurfaceOf();
if ( 0 == srf )
return false;
brep.m_V.Reserve( brep.m_V.Count() + 1 );
ON_BrepVertex* v0 = brep.Vertex(trim.m_vi[0]);
if ( 0 == v0 )
return false;
// get new 3d curve
ON_Curve* c3 = PushUpIsoTrim( brep, trim );
if ( 0 == c3 )
return false;
// valid singular trim can be changed to non-singular trim
// create new vertex for end of this trim
v0->m_tolerance = ON_UNSET_VALUE;
ON_BrepVertex* v1 = 0;
if ( c3->IsClosed() )
{
// 3d edge is closed so start and end vertex are still the same.
v1 = v0;
}
else
{
// new 3d edge is not closed, so the single singular vertex
// needs to be "split" into two vertices.
brep.NewVertex();
v1 = brep.m_V.Last();
}
trim.m_vi[1] = v1->m_vertex_index;
// update the start of the next trim to use new vertex
if ( nexttrim && nexttrim->m_trim_index != trim.m_trim_index )
{
ChangeTrimVertex( brep, *nexttrim, 0, v0->m_vertex_index, v1->m_vertex_index, true, true );
}
// make a new edge
int ci = brep.AddEdgeCurve(c3);
c3 = 0;
ON_BrepEdge& edge = brep.NewEdge(*v0,*v1,ci);
edge.m_tolerance = 0.0;
// hook trim to new edge
trim.m_type = ON_BrepTrim::boundary;
trim.m_bRev3d = false;
trim.m_ei = edge.m_edge_index;
edge.m_ti.Append(trim.m_trim_index);
return true;
}
bool ON_BrepExtrude(
ON_Brep& brep,
const ON_Curve& path_curve,
bool bCap
)
{
ON_Workspace ws;
const int vcount0 = brep.m_V.Count();
const int tcount0 = brep.m_T.Count();
const int lcount0 = brep.m_L.Count();
const int ecount0 = brep.m_E.Count();
const int fcount0 = brep.m_F.Count();
const ON_3dPoint PathStart = path_curve.PointAtStart();
ON_3dPoint P = path_curve.PointAtEnd();
if ( !PathStart.IsValid() || !P.IsValid() )
return false;
const ON_3dVector height = P - PathStart;
if ( !height.IsValid() || height.Length() <= ON_ZERO_TOLERANCE )
return false;
ON_Xform tr;
tr.Translation(height);
// count number of new sides
int side_count = 0;
int i, vi, ei, fi;
bool* bSideEdge = (bool*)ws.GetIntMemory(ecount0*sizeof(bSideEdge[0]));
for ( ei = 0; ei < ecount0; ei++ )
{
const ON_BrepEdge& e = brep.m_E[ei];
if ( 1 == e.m_ti.Count() )
{
side_count++;
bSideEdge[ei] = true;
}
else
{
bSideEdge[ei] = false;
}
}
brep.m_V.Reserve( 2*vcount0 );
i = 4*side_count + (bCap?tcount0:0);
brep.m_T.Reserve( tcount0 + i );
brep.m_C2.Reserve( brep.m_C2.Count() + i );
brep.m_L.Reserve( lcount0 + side_count + (bCap?lcount0:0) );
i = side_count + (bCap?ecount0:side_count);
brep.m_E.Reserve( ecount0 + i );
brep.m_C3.Reserve( brep.m_C3.Count() + i );
i = side_count + (bCap?fcount0:0);
brep.m_F.Reserve( fcount0 + i );
brep.m_S.Reserve( brep.m_S.Count() + i );
bool bOK = true;
// build top vertices
int* topvimap = ws.GetIntMemory(vcount0);
memset(topvimap,0,vcount0*sizeof(topvimap[0]));
if ( bCap )
{
for ( vi = 0; vi < vcount0; vi++ )
{
const ON_BrepVertex& bottomv = brep.m_V[vi];
ON_BrepVertex& topv = brep.NewVertex(bottomv.point+height,bottomv.m_tolerance);
topvimap[vi] = topv.m_vertex_index;
}
}
else
{
for ( ei = 0; ei < ecount0; ei++ )
{
if ( bSideEdge[ei] )
{
const ON_BrepEdge& bottome = brep.m_E[ei];
int bottomvi0 = bottome.m_vi[0];
if ( bottomvi0 < 0 || bottomvi0 >= vcount0 )
{
bOK = false;
break;
}
int bottomvi1 = bottome.m_vi[1];
if ( bottomvi1 < 0 || bottomvi1 >= vcount0 )
{
bOK = false;
break;
}
if ( !topvimap[bottomvi0] )
{
const ON_BrepVertex& bottomv = brep.m_V[bottomvi0];
ON_BrepVertex& topv = brep.NewVertex(bottomv.point+height,bottomv.m_tolerance);
topvimap[bottomvi0] = topv.m_vertex_index;
}
if ( !topvimap[bottomvi1] )
{
const ON_BrepVertex& bottomv = brep.m_V[bottomvi1];
ON_BrepVertex& topv = brep.NewVertex(bottomv.point+height,bottomv.m_tolerance);
topvimap[bottomvi1] = topv.m_vertex_index;
}
}
}
}
// build top edges
int* topeimap = ws.GetIntMemory(ecount0);
memset(topeimap,0,ecount0*sizeof(topeimap[0]));
if ( bOK ) for ( ei = 0; ei < ecount0; ei++ )
{
if ( bCap || bSideEdge[ei] )
{
const ON_BrepEdge& bottome = brep.m_E[ei];
ON_BrepVertex& topv0 = brep.m_V[topvimap[bottome.m_vi[0]]];
ON_BrepVertex& topv1 = brep.m_V[topvimap[bottome.m_vi[1]]];
ON_Curve* c3 = bottome.DuplicateCurve();
if ( !c3 )
{
bOK = false;
break;
}
c3->Transform(tr);
int c3i = brep.AddEdgeCurve(c3);
ON_BrepEdge& tope = brep.NewEdge(topv0,topv1,c3i,0,bottome.m_tolerance);
topeimap[ei] = tope.m_edge_index;
}
}
// build side edges
int* sideveimap = ws.GetIntMemory(vcount0);
memset(sideveimap,0,vcount0*sizeof(sideveimap[0]));
if ( bOK ) for ( vi = 0; vi < vcount0; vi++ )
{
ON_BrepVertex& bottomv = brep.m_V[vi];
for ( int vei = 0; vei < bottomv.m_ei.Count(); vei++ )
{
if ( bSideEdge[bottomv.m_ei[vei]] && topvimap[vi] )
{
ON_BrepVertex& topv = brep.m_V[topvimap[vi]];
ON_Curve* c3 = path_curve.DuplicateCurve();
if ( !c3 )
{
bOK = false;
}
else
{
ON_3dVector D = bottomv.point - PathStart;
c3->Translate(D);
int c3i = brep.AddEdgeCurve(c3);
const ON_BrepEdge& e = brep.NewEdge(bottomv,topv,c3i,0,0.0);
sideveimap[vi] = e.m_edge_index;
}
break;
}
}
}
if ( bOK && bCap )
{
// build top faces
for (fi = 0; fi < fcount0; fi++ )
{
const ON_BrepFace& bottomf = brep.m_F[fi];
ON_Surface* srf = bottomf.DuplicateSurface();
if ( !srf )
{
bOK = false;
break;
}
srf->Transform(tr);
int si = brep.AddSurface(srf);
ON_BrepFace& topf = brep.NewFace(si);
topf.m_bRev = !bottomf.m_bRev;
const int loop_count = bottomf.m_li.Count();
topf.m_li.Reserve(loop_count);
for ( int fli = 0; fli < loop_count; fli++ )
{
const ON_BrepLoop& bottoml = brep.m_L[bottomf.m_li[fli]];
ON_BrepLoop& topl = brep.NewLoop(bottoml.m_type,topf);
const int loop_trim_count = bottoml.m_ti.Count();
topl.m_ti.Reserve(loop_trim_count);
for ( int lti = 0; lti < loop_trim_count; lti++ )
{
const ON_BrepTrim& bottomt = brep.m_T[bottoml.m_ti[lti]];
ON_NurbsCurve* c2 = ON_NurbsCurve::New();
if ( !bottomt.GetNurbForm(*c2) )
{
delete c2;
bOK = false;
break;
}
int c2i = brep.AddTrimCurve(c2);
ON_BrepTrim* topt = 0;
if ( bottomt.m_ei >= 0 )
{
ON_BrepEdge& tope = brep.m_E[topeimap[bottomt.m_ei]];
topt = &brep.NewTrim(tope,bottomt.m_bRev3d,topl,c2i);
}
else
{
// singular trim
ON_BrepVertex& topv = brep.m_V[topvimap[bottomt.m_vi[0]]];
topt = &brep.NewSingularTrim(topv,topl,bottomt.m_iso,c2i);
}
topt->m_tolerance[0] = bottomt.m_tolerance[0];
topt->m_tolerance[1] = bottomt.m_tolerance[1];
topt->m_pbox = bottomt.m_pbox;
topt->m_type = bottomt.m_type;
topt->m_iso = bottomt.m_iso;
}
topl.m_pbox = bottoml.m_pbox;
}
}
}
// build sides
int bRev3d[4] = {0,0,1,1};
int vid[4], eid[4];
if( bOK ) for ( ei = 0; ei < ecount0; ei++ )
{
if ( bSideEdge[ei] && topeimap[ei] )
{
ON_BrepEdge& bottome = brep.m_E[ei];
ON_BrepEdge& tope = brep.m_E[topeimap[ei]];
vid[0] = bottome.m_vi[0];
vid[1] = bottome.m_vi[1];
vid[2] = topvimap[vid[1]];
vid[3] = topvimap[vid[0]];
if ( sideveimap[vid[0]] && sideveimap[vid[1]] )
{
ON_BrepEdge& leftedge = brep.m_E[sideveimap[vid[0]]];
ON_BrepEdge& rightedge = brep.m_E[sideveimap[vid[1]]];
ON_Curve* cx = bottome.DuplicateCurve();
if ( !cx )
{
bOK = false;
break;
}
ON_Curve* cy = leftedge.DuplicateCurve();
if ( !cy )
{
delete cx;
bOK = false;
break;
}
ON_SumSurface* srf = new ON_SumSurface();
srf->m_curve[0] = cx;
srf->m_curve[1] = cy;
srf->m_basepoint = srf->m_curve[1]->PointAtStart();
srf->m_basepoint.x = -srf->m_basepoint.x;
srf->m_basepoint.y = -srf->m_basepoint.y;
srf->m_basepoint.z = -srf->m_basepoint.z;
eid[0] = bottome.m_edge_index;
eid[1] = rightedge.m_edge_index;
eid[2] = tope.m_edge_index;
eid[3] = leftedge.m_edge_index;
ON_BrepFace* face = brep.NewFace(srf,vid,eid,bRev3d);
if ( !face )
{
bOK = false;
break;
}
else if ( bottome.m_ti.Count() == 2 )
{
const ON_BrepTrim& trim0 = brep.m_T[bottome.m_ti[0]];
const ON_BrepTrim& trim1 = brep.m_T[bottome.m_ti[1]];
const ON_BrepLoop& loop0 = brep.m_L[trim0.m_li];
const ON_BrepLoop& loop1 = brep.m_L[trim1.m_li];
bool bBottomFaceRev = brep.m_F[(loop0.m_fi != face->m_face_index) ? loop0.m_fi : loop1.m_fi].m_bRev;
bool bSideFaceRev = ( trim0.m_bRev3d != trim1.m_bRev3d )
? bBottomFaceRev
: !bBottomFaceRev;
face->m_bRev = bSideFaceRev;
}
}
}
}
if ( !bOK )
{
for ( vi = brep.m_V.Count(); vi >= vcount0; vi-- )
{
brep.DeleteVertex(brep.m_V[vi]);
}
}
return bOK;
}
static
bool ON_BrepExtrudeHelper_MakeTopLoop(
ON_Brep& brep,
ON_BrepFace& top_face,
int bottom_loop_index,
const ON_3dVector path_vector,
const int* side_face_index // array of brep.m_L[bottom_loop_index].m_ti.Count() face indices
)
{
bool rc = true;
int lti, top_trim_index, i;
if ( bottom_loop_index < 0 || bottom_loop_index >= brep.m_L.Count() )
return false;
ON_BrepLoop::TYPE loop_type = brep.m_L[bottom_loop_index].m_type;
if ( loop_type != ON_BrepLoop::inner )
loop_type = ON_BrepLoop::outer;
ON_BrepLoop& top_loop = brep.NewLoop( loop_type, top_face );
const ON_BrepLoop& bottom_loop = brep.m_L[bottom_loop_index];
const int loop_trim_count = bottom_loop.m_ti.Count();
brep.m_T.Reserve( brep.m_T.Count() + loop_trim_count );
// Set top_vertex_index[lti] = index of vertex above
// vertex brep.m_V[brep.m_T[bottom_loop.m_ti[lti]].m_vi[0]].
// Set top_vertex_index[lti] = index of edge above
// edge of brep.m_T[bottom_loop.m_ti[lti]].
// This informtion is needed for singular and seam trims.
ON_SimpleArray<int> top_vertex_index(loop_trim_count);
ON_SimpleArray<int> top_edge_index(loop_trim_count);
ON_SimpleArray<bool> top_trim_bRev3d(loop_trim_count);
for ( lti = 0; lti < loop_trim_count; lti++ )
{
top_vertex_index.Append(-1);
top_edge_index.Append(-1);
top_trim_bRev3d.Append(false);
}
// some (often all of) of the "top" vertices are already on
// the side faces
for ( lti = 0; lti < loop_trim_count; lti++ )
{
if ( side_face_index[lti] >= 0 )
{
const ON_BrepFace& side_face = brep.m_F[side_face_index[lti]];
const ON_BrepLoop& side_loop = brep.m_L[side_face.m_li[0]];
const ON_BrepTrim& side_north_trim = brep.m_T[side_loop.m_ti[2]];
top_vertex_index[lti] = side_north_trim.m_vi[0];
top_vertex_index[(lti+1)%loop_trim_count] = side_north_trim.m_vi[1];
top_edge_index[lti] = side_north_trim.m_ei;
}
else
{
// fix for RR 20423
int lti_prev = (lti+loop_trim_count-1)%loop_trim_count;
int lti_next = (lti+1)%loop_trim_count;
if ( side_face_index[lti_prev] < 0
&& side_face_index[lti_next] < 0
&& top_vertex_index[lti] < 0
&& top_vertex_index[lti_next] < 0
)
{
int bottom_ti_prev = bottom_loop.m_ti[lti_prev];
int bottom_ti = bottom_loop.m_ti[lti];
int bottom_ti_next = bottom_loop.m_ti[lti_next];
if ( bottom_ti >= 0 && bottom_ti < brep.m_T.Count()
&& bottom_ti_prev >= 0 && bottom_ti_prev < brep.m_T.Count()
&& bottom_ti_next >= 0 && bottom_ti_next < brep.m_T.Count()
)
{
const ON_BrepTrim& bottom_trim_prev = brep.m_T[bottom_ti_prev];
const ON_BrepTrim& bottom_trim = brep.m_T[bottom_ti];
const ON_BrepTrim& bottom_trim_next = brep.m_T[bottom_ti_next];
if ( ON_BrepTrim::seam == bottom_trim_prev.m_type
&& ON_BrepTrim::singular == bottom_trim.m_type
&& ON_BrepTrim::seam == bottom_trim_next.m_type
&& bottom_trim.m_vi[0] == bottom_trim.m_vi[1]
)
{
int vi = bottom_trim.m_vi[0];
if ( vi >= 0 && vi < brep.m_V.Count() )
{
ON_BrepVertex& top_vertex = brep.NewVertex(brep.m_V[vi].point+path_vector,0.0);
top_vertex_index[lti] = top_vertex.m_vertex_index;
top_vertex_index[lti_next] = top_vertex_index[lti];
}
}
}
}
}
}
// Fill in the missing "top" vertices that
// are associated with singular and trim edges by looking
// at their neighbors.
{
bool bKeepChecking = true;
while( bKeepChecking )
{
// set back to true if we make a change. This handles the
// (very rare) cases of multiple adjacent singular trims.
bKeepChecking = false;
for ( lti = 0; lti < loop_trim_count; lti++ )
{
if ( top_vertex_index[lti] == -1 )
{
for ( i = lti+1; i < loop_trim_count; i++ )
{
if ( ON_BrepTrim::singular != brep.m_T[bottom_loop.m_ti[i-1]].m_type )
break;
if ( top_vertex_index[i] >= 0 )
{
top_vertex_index[lti] = top_vertex_index[i];
bKeepChecking = true;
break;
}
}
}
if ( top_vertex_index[lti] == -1 )
{
for ( i = lti-1; i >= 0; i-- )
{
if ( ON_BrepTrim::singular != brep.m_T[bottom_loop.m_ti[i+1]].m_type )
break;
if ( top_vertex_index[i] >= 0 )
{
top_vertex_index[lti] = top_vertex_index[i];
bKeepChecking = true;
break;
}
}
}
}
}
}
// Fill in missing edges of "seam" trims.
for ( lti = 0; lti < loop_trim_count; lti++ )
{
if ( -1 != top_edge_index[lti] )
continue;
int bottom_ti = bottom_loop.m_ti[lti];
if ( bottom_ti < 0 || bottom_ti >= brep.m_T.Count() )
continue;
const ON_BrepTrim& bottom_trim = brep.m_T[bottom_ti];
if ( ON_BrepTrim::seam != bottom_trim.m_type )
continue;
if ( bottom_trim.m_ei < 0 )
continue;
if ( bottom_trim.m_ei >= brep.m_E.Count() )
continue;
// duplicate bottom edge curve
const ON_BrepEdge& bottom_edge = brep.m_E[bottom_trim.m_ei];
ON_Curve* top_c3 = bottom_edge.DuplicateCurve();
if ( 0 == top_c3 )
continue;
// move new edge curve to top location
top_c3->Translate(path_vector);
ON_3dPoint P0 = top_c3->PointAtStart();
ON_3dPoint P1 = top_c3->PointAtEnd();
int top_c3i = brep.AddEdgeCurve(top_c3);
top_c3 = 0;
// get vertices at start/end of the new edge
int e_vi0 = top_vertex_index[lti];
int e_vi1 = top_vertex_index[(lti+1)%loop_trim_count];
if ( bottom_trim.m_bRev3d )
{
// put points in trim order
ON_3dPoint tmp_P = P0; P0 = P1; P1 = tmp_P;
}
if ( e_vi0 < 0 )
{
e_vi0 = brep.NewVertex(P0).m_vertex_index;
top_vertex_index[lti] = e_vi0;
}
if ( e_vi1 < 0 )
{
e_vi1 = brep.NewVertex(P1).m_vertex_index;
top_vertex_index[(lti+1)%loop_trim_count] = e_vi1;
}
if ( bottom_trim.m_bRev3d )
{
// put edge vertex indices in edge order
int tmp_i = e_vi0; e_vi0 = e_vi1; e_vi1 = tmp_i;
}
ON_BrepEdge& top_edge = brep.NewEdge(brep.m_V[e_vi0],brep.m_V[e_vi1],top_c3i);
top_edge.m_tolerance = bottom_edge.m_tolerance;
top_edge_index[lti] = top_edge.m_edge_index;
top_trim_bRev3d[lti] = bottom_trim.m_bRev3d?true:false;
// find seam mate and set it's
// top_edge_index[] to top_edge.m_edge_index.
int mate_lti;
for( mate_lti = lti+1; mate_lti < loop_trim_count; mate_lti++ )
{
if ( top_edge_index[mate_lti] != -1 )
continue;
int bottom_mate_ti = bottom_loop.m_ti[mate_lti];
if ( bottom_mate_ti < 0 || bottom_mate_ti >= brep.m_T.Count() )
continue;
const ON_BrepTrim& bottom_mate_trim = brep.m_T[bottom_mate_ti];
if ( bottom_mate_trim.m_type != ON_BrepTrim::seam )
continue;
if ( bottom_mate_trim.m_ei != bottom_trim.m_ei )
continue;
top_edge_index[mate_lti] = top_edge.m_edge_index;
top_trim_bRev3d[mate_lti] = bottom_mate_trim.m_bRev3d?true:false;
break;
}
}
for ( lti = 0; lti < loop_trim_count; lti++ )
{
const ON_BrepTrim& bottom_trim = brep.m_T[ bottom_loop.m_ti[lti] ];
ON_Curve* top_c2 = bottom_trim.DuplicateCurve();
int top_c2i = (0!=top_c2) ? brep.AddTrimCurve(top_c2) : bottom_trim.m_c2i;
top_trim_index = -1;
if ( bottom_trim.m_type == ON_BrepTrim::singular && top_vertex_index[lti] >= 0 )
{
top_trim_index = brep.NewSingularTrim(brep.m_V[top_vertex_index[lti]], top_loop, bottom_trim.m_iso, top_c2i ).m_trim_index;
}
else if ( bottom_trim.m_type != ON_BrepTrim::singular && top_edge_index[lti] >= 0 && top_edge_index[lti] < brep.m_E.Count() )
{
ON_BrepEdge& top_edge = brep.m_E[top_edge_index[lti]];
top_trim_index = brep.NewTrim( top_edge, top_trim_bRev3d[lti], top_loop, top_c2i ).m_trim_index;
}
else
{
ON_ERROR("ON_BrepExtrudeHelper_MakeTopLoop ran into capping trouble.");
rc = false;
break;
}
ON_BrepTrim& top_trim = brep.m_T[top_trim_index];
top_trim.m_pline = bottom_trim.m_pline;
top_trim.m_pbox = bottom_trim.m_pbox;
top_trim.m_iso = bottom_trim.m_iso;
top_trim.m_type = bottom_trim.m_type;
top_trim.m_tolerance[0] = bottom_trim.m_tolerance[0];
top_trim.m_tolerance[1] = bottom_trim.m_tolerance[1];
top_trim.m__legacy_2d_tol = bottom_trim.m__legacy_2d_tol;
top_trim.m__legacy_3d_tol = bottom_trim.m__legacy_2d_tol;
top_trim.m__legacy_flags = bottom_trim.m__legacy_flags;
}
if (rc)
{
top_loop.m_pbox = bottom_loop.m_pbox;
}
return rc;
}