Esempi in C++ (Cpp) per PHAL_RUART_OP::HalRuartResetRxFifo

Esempio n. 1

File: serial_api.c Progetto: alex1818/rtk-8711af

// return the byte count received before timeout, or error(<0)
int32_t serial_recv_stream_timeout (serial_t *obj, char *prxbuf, uint32_t len, uint32_t timeout_ms, void *force_cs)
{
    PHAL_RUART_OP      pHalRuartOp;
    PHAL_RUART_ADAPTER pHalRuartAdapter=(PHAL_RUART_ADAPTER)&(obj->hal_uart_adp);
    uint32_t TimeoutCount=0, StartCount;
    int ret;
    void (*task_yield)(void);

    task_yield = NULL;
    pHalRuartOp = &(obj->hal_uart_op);
    HalRuartEnterCritical(pHalRuartAdapter);
    ret = pHalRuartOp->HalRuartIntRecv(pHalRuartAdapter, (u8*)prxbuf, len);
    HalRuartExitCritical(pHalRuartAdapter);
    if ((ret == HAL_OK) && (timeout_ms > 0)) {
        TimeoutCount = (timeout_ms*1000/TIMER_TICK_US);
        StartCount = HalTimerOp.HalTimerReadCount(1);
        task_yield = (void (*)(void))force_cs;
        while (pHalRuartAdapter->State & HAL_UART_STATE_BUSY_RX) {
            if (HAL_TIMEOUT == RuartIsTimeout(StartCount, TimeoutCount)) {
                ret = pHalRuartOp->HalRuartStopRecv((VOID*)pHalRuartAdapter);
                ret = pHalRuartOp->HalRuartResetRxFifo((VOID*)pHalRuartAdapter);
                pHalRuartAdapter->Status = HAL_UART_STATUS_TIMEOUT;
                break;
            }
            if (NULL != task_yield) {
               task_yield();
            }
        }
        return (len - pHalRuartAdapter->RxCount);
    } else {
        return (-ret);
    }
}

Esempio n. 2

File: serial_api.c Progetto: eggman/arm-gcc-blink-example

void serial_clear(serial_t *obj) 
{
    PHAL_RUART_ADAPTER pHalRuartAdapter;
    PHAL_RUART_OP pHalRuartOp;

    pHalRuartAdapter = &(obj->hal_uart_adp);
    pHalRuartOp = &(obj->hal_uart_op);

    pHalRuartOp->HalRuartResetRxFifo(pHalRuartAdapter);
}

Esempio n. 3

File: serial_api.c Progetto: alex1818/rtk-8711af

void serial_clear(serial_t *obj) 
{
    PHAL_RUART_ADAPTER pHalRuartAdapter;
    PHAL_RUART_OP pHalRuartOp;
    char temp;

    pHalRuartAdapter = &(obj->hal_uart_adp);
    pHalRuartOp = &(obj->hal_uart_op);

    pHalRuartOp->HalRuartResetRxFifo(pHalRuartAdapter);
    while (HAL_OK == pHalRuartOp->HalRuartGetC(pHalRuartAdapter, &temp));
}

Esempio n. 4

File: serial_api.c Progetto: geliang201201/RTL_Ameba

int32_t serial_recv_stream_abort (serial_t *obj)
{
    PHAL_RUART_OP      pHalRuartOp;
    PHAL_RUART_ADAPTER pHalRuartAdapter=(PHAL_RUART_ADAPTER)&(obj->hal_uart_adp);
    int ret;

    pHalRuartOp = &(obj->hal_uart_op);
    
    ret = pHalRuartOp->HalRuartStopRecv((VOID*)pHalRuartAdapter);
    ret = pHalRuartOp->HalRuartResetRxFifo((VOID*)pHalRuartAdapter);
    return (ret);
}

Esempio n. 5

File: serial_api.c Progetto: alex1818/rtk-8711af

int32_t serial_recv_stream_dma_timeout (serial_t *obj, char *prxbuf, uint32_t len, uint32_t timeout_ms, void *force_cs)
{
    PHAL_RUART_OP      pHalRuartOp;
    PHAL_RUART_ADAPTER pHalRuartAdapter=(PHAL_RUART_ADAPTER)&(obj->hal_uart_adp);
    u8  uart_idx = pHalRuartAdapter->UartIndex;
    uint32_t TimeoutCount=0, StartCount;
    int ret;
    void (*task_yield)(void);

    pHalRuartOp = &(obj->hal_uart_op);
    if ((serial_dma_en[uart_idx] & SERIAL_RX_DMA_EN)==0) {
        PUART_DMA_CONFIG   pHalRuartDmaCfg;

        pHalRuartDmaCfg = &obj->uart_gdma_cfg;
        if (HAL_OK == HalRuartRxGdmaInit(pHalRuartOp, pHalRuartAdapter, pHalRuartDmaCfg)) {
            serial_dma_en[uart_idx] |= SERIAL_RX_DMA_EN;
        }
        else {
            return HAL_BUSY;
        }
    }
    HalRuartEnterCritical(pHalRuartAdapter);
    ret = pHalRuartOp->HalRuartDmaRecv(pHalRuartAdapter, (u8*)prxbuf, len);
    HalRuartExitCritical(pHalRuartAdapter);
    
    if ((ret == HAL_OK) && (timeout_ms > 0)) {
        TimeoutCount = (timeout_ms*1000/TIMER_TICK_US);
        StartCount = HalTimerOp.HalTimerReadCount(1);
        task_yield = (void (*)(void))force_cs;
        pHalRuartAdapter->Status = HAL_UART_STATUS_OK;
        while (pHalRuartAdapter->State & HAL_UART_STATE_BUSY_RX) {
            if (HAL_TIMEOUT == RuartIsTimeout(StartCount, TimeoutCount)) {
                ret = pHalRuartOp->HalRuartStopRecv((VOID*)pHalRuartAdapter);
                ret = pHalRuartOp->HalRuartResetRxFifo((VOID*)pHalRuartAdapter);
                pHalRuartAdapter->Status = HAL_UART_STATUS_TIMEOUT;
                break;
            }
            if (NULL != task_yield) {
               task_yield();
            }
        }
        if (pHalRuartAdapter->Status == HAL_UART_STATUS_TIMEOUT) {
            return (len - pHalRuartAdapter->RxCount);
        } else {
            return len;
        }
    } else {
        return (-ret);
    }
//  return (ret);
}