ConstraintDialog::ConstraintDialog(ConstraintCanvas * c)
: QDialog(0, "ConstraintVisibilityDialog", TRUE, 0), constraint(c)
{
setCaption(TR("Constraints visibility dialog"));
Q3VBoxLayout * vbox = new Q3VBoxLayout(this);
vbox->setMargin(5);
table = new ConstraintTable(this, constraint);
vbox->addWidget(table);
vbox->addWidget(new QLabel(this));
Q3HBoxLayout * hbox;
hbox = new Q3HBoxLayout(vbox);
cb_visible = new QCheckBox(TR("Specify visible elements rather than hidden ones"), this);
cb_visible->setChecked(constraint->indicate_visible);
hbox->addWidget(cb_visible);
QPushButton * showall = new QPushButton(TR("Show all"), this);
QPushButton * hideall = new QPushButton(TR("Hide all"), this);
QPushButton * hideinherited = new QPushButton(TR("Hide inherited"), this);
QSize bs = hideinherited->sizeHint();
showall->setFixedSize(bs);
hideall->setFixedSize(bs);
hideinherited->setFixedSize(bs);
hbox->addWidget(new QLabel(this));
hbox->addWidget(showall);
hbox->addWidget(new QLabel(this));
hbox->addWidget(hideall);
hbox->addWidget(new QLabel(this));
hbox->addWidget(hideinherited);
hbox->addWidget(new QLabel(this));
connect(showall, SIGNAL(clicked()), this, SLOT(show_all()));
connect(hideall, SIGNAL(clicked()), this, SLOT(hide_all()));
connect(hideinherited, SIGNAL(clicked()), this, SLOT(hide_inherited()));
vbox->addWidget(new QLabel(this));
hbox = new Q3HBoxLayout(vbox);
hbox->setMargin(5);
QPushButton * ok = new QPushButton(TR("&OK"), this);
QPushButton * cancel = new QPushButton(TR("&Cancel"), this);
ok->setDefault(TRUE);
bs = cancel->sizeHint();
ok->setFixedSize(bs);
cancel->setFixedSize(bs);
hbox->addWidget(ok);
hbox->addWidget(cancel);
connect(ok, SIGNAL(clicked()), this, SLOT(accept()));
connect(cancel, SIGNAL(clicked()), this, SLOT(reject()));
}
int main(int argc, char** argv)
{
// Initialise the program
KCmdLineArgs::init(argc, argv, "kexidbcomboboxtest", 0, KLocalizedString(), "", KLocalizedString(), true);
KApplication* app = new KApplication(true, true);
// Look for installed database drivers
KDbDriverManager manager;
KDbDriver::InfoHash drvs = manager.driversInfo();
// Set up a combo box and a quit widget in a new container
QWidget* vbox = new QWidget();
Q3VBoxLayout* vbLayout = new Q3VBoxLayout(vbox);
KexiDBDriverComboBox* all = new KexiDBDriverComboBox(vbox, drvs);
KexiDBDriverComboBox* srvOnly = new KexiDBDriverComboBox(vbox, drvs,
KexiDBDriverComboBox::ShowServerDrivers);
QPushButton* quit = new QPushButton("Quit", vbox);
vbLayout->addWidget(all); // Combobox listing all drivers
vbLayout->addWidget(srvOnly); // Combobox only drivers for DB servers
vbLayout->addWidget(quit);
// Show the whole lot
QObject::connect(quit, SIGNAL(clicked()), app, SLOT(quit()));
vbox->show();
app->exec();
delete app;
}
LCDRange::LCDRange( QWidget *parent, const char *name ): QWidget( parent, name )
{
//QLCDNumber *lcd = new QLCDNumber( 2, this, "lcd" );
QLCDNumber *lcd = new QLCDNumber( 2 );
lcd->setSegmentStyle(QLCDNumber::Filled);
//slider = new QSlider( Horizontal, this, "slider" );
slider = new QSlider( Horizontal);
slider->setRange( 0, 99 );
slider->setValue( 0 );
//设置滑块为焦点代理。当想要给LCDRange一个键盘焦点，滑块就会注意到它。
setFocusProxy( slider );
//这里把slider的valueChanged信号分别连接到display和自定义的valueChanged上面
connect( slider, SIGNAL(valueChanged(int)), lcd,
SLOT(display(int)) );
//这里两种方式实现信号的连接，利用标准信号发出自定义信号。
//connect( slider, SIGNAL(valueChanged(int)),
// SIGNAL(valueChanged(int)) );
connect( slider, SIGNAL(valueChanged(int)), this,
SIGNAL(valueChanged(int)) );
//这里利用另外的方式实现添加到VBox，而不用继承QVBox类
Q3VBoxLayout *layout = new Q3VBoxLayout;
layout->addWidget(lcd);
layout->addWidget(slider);
setLayout(layout);
}
ConfigForm::ConfigForm(int aCurrentIntervalValue, QWidget *parent,
const char *name,
bool modal, Qt::WFlags f)
: QDialog( parent, name, modal, f ),
mApplyButton(kNULL), mCancelButton(kNULL)
{
mMinVal_Sec = float(kMIN_POLLING_INT) / 1000.f;
mMaxVal_Sec = float(kMAX_POLLING_INT) / 1000.f;
REG_DBGMSG1("ARPDBG: min val = ", mMinVal_Sec);
REG_DBGMSG1("ARPDBG: max val = ", mMaxVal_Sec);
REG_DBGCON("ConfigForm");
// note aCurrentIntervalValue is in milliseconds - convert to
// seconds for GUI entry
this->setCaption( "Configure Polling" );
resize( 150, 150 );
// create the layouts for the form
Q3VBoxLayout *lFormLayout = new Q3VBoxLayout(this, 10, 10, "configformlayout");
Q3HBoxLayout *lButtonLayout = new Q3HBoxLayout(6, "configbuttonlayout");
lFormLayout->addWidget(new QLabel("Enter interval value (seconds) \n"
"Valid range: "
+QString::number(mMinVal_Sec)
+" - "+QString::number(mMaxVal_Sec)
+" (2 d.p.)", this));
mLineEdit = new QLineEdit( this );
double lVal = (double) aCurrentIntervalValue/1000;
mLineEdit->setText(QString::number(lVal, 'g', 3));
mLineEdit->setValidator( new QDoubleValidator(mLineEdit, "dbleavlidator" ) );
lFormLayout->addWidget( mLineEdit);
mApplyButton = new QPushButton("Apply", this, "Applybutton"); \
mApplyButton->setAutoDefault(FALSE);
QToolTip::add(mApplyButton, "Apply to steerer");
connect(mApplyButton, SIGNAL(clicked()), this, SLOT(applySlot()));
mCancelButton = new QPushButton("Cancel", this, "cancelbutton");
mCancelButton->setAutoDefault(FALSE);
connect(mCancelButton, SIGNAL(clicked()), this, SLOT( reject()));
mCancelButton->setMinimumSize(mCancelButton->sizeHint());
mCancelButton->setMaximumSize(mCancelButton->sizeHint());
mApplyButton->setMinimumSize(mCancelButton->sizeHint());
mApplyButton->setMaximumSize(mApplyButton->sizeHint());
lButtonLayout->addWidget(mApplyButton);
lButtonLayout->addWidget(mCancelButton);
lFormLayout->addLayout(lButtonLayout);
}
Dialog::Dialog(BooL & rec, char & lang) : QDialog(0, 0, TRUE), _rec(rec), _lang(lang) {
Q3VBoxLayout * vbox = new Q3VBoxLayout(this);
Q3HBox * htab;
vbox->setMargin(5);
// recursive checkbox
if (rec) {
htab = new Q3HBox(this);
htab->setMargin(5);
vbox->addWidget(htab);
rec_cb = new QCheckBox("Do recursively", htab);
}
else
rec_cb = 0;
// langs + cancel buttons
htab = new Q3HBox(this);
htab->setMargin(5);
vbox->addWidget(htab);
QPushButton * cpp = new QPushButton("&C++", htab);
new QLabel(htab);
QPushButton * java = new QPushButton("&Java", htab);
new QLabel(htab);
QPushButton * idl = new QPushButton("&Idl", htab);
new QLabel(htab);
QPushButton * php = new QPushButton("P&hp", htab);
new QLabel(htab);
QPushButton * python = new QPushButton("P&ython", htab);
new QLabel(htab);
QPushButton * cancel = new QPushButton("&Cancel", htab);
new QLabel(htab);
QSize bs(cancel->sizeHint());
cpp->setFixedSize(bs);
java->setFixedSize(bs);
connect(cpp, SIGNAL(clicked()), this, SLOT(accept_cpp()));
connect(java, SIGNAL(clicked()), this, SLOT(accept_java()));
connect(idl, SIGNAL(clicked()), this, SLOT(accept_idl()));
connect(php, SIGNAL(clicked()), this, SLOT(accept_php()));
connect(python, SIGNAL(clicked()), this, SLOT(accept_python()));
connect(cancel, SIGNAL(clicked()), this, SLOT(reject()));
// help
htab = new Q3HBox(this);
htab->setMargin(5);
vbox->addWidget(htab);
new QLabel(htab);
new QLabel("Warning : reset the declarations/definitions to\n"
"their default value from the 'generation settings'", htab);
new QLabel(htab);
}
TicTacToe::TicTacToe( bool meFirst, int boardSize, QWidget *parent, const char *name )
: QWidget( parent, name )
{
Q3VBoxLayout * l = new Q3VBoxLayout( this, 6 );
// Create a message label
message = new QLabel( this );
message->setFrameStyle( Q3Frame::WinPanel | Q3Frame::Sunken );
message->setAlignment( Qt::AlignCenter );
l->addWidget( message );
// Create the game board and connect the signal finished() to this
// gameOver() slot
board = new TicTacGameBoard( meFirst, boardSize, this );
connect( board, SIGNAL(finished()), SLOT(gameOver()) );
l->addWidget( board );
// Create a horizontal frame line
Q3Frame *line = new Q3Frame( this );
line->setFrameStyle( Q3Frame::HLine | Q3Frame::Sunken );
l->addWidget( line );
// Create the combo box for deciding who should start, and
// connect its clicked() signals to the buttonClicked() slot
whoStarts = new QComboBox( this );
whoStarts->insertItem( "Opponent starts" );
whoStarts->insertItem( "You start" );
l->addWidget( whoStarts );
whoStarts->setEnabled(false);
whoStarts->setCurrentIndex(meFirst);
// Create the push buttons and connect their clicked() signals
// to this right slots.
connect( board, SIGNAL(myMove(int)), this, SIGNAL(myMove(int)));
connect( board, SIGNAL(stateChanged()), this, SLOT(newState()));
newGame = new QPushButton( "Play!", this );
connect( newGame, SIGNAL(clicked()), SLOT(newGameClicked()) );
newGame->setEnabled(false);
quit = new QPushButton( "Quit", this );
connect( quit, SIGNAL(clicked()), this, SIGNAL(closing()) );
Q3HBoxLayout * b = new Q3HBoxLayout;
l->addLayout( b );
b->addWidget( newGame );
b->addWidget( quit );
newState();
//board->newGame();
newGameClicked();
}
XListDialog::XListDialog( QWidget* parent, const char* name, bool modal, Qt::WFlags fl ) :
QDialog( parent, name, modal, fl )
{
if ( !name )
setName( "XListDialog" );
Q3VBoxLayout * XListDialogLayout = new Q3VBoxLayout( this, 11, 6, "XListDialogLayout");
Q3HBoxLayout * layout13 = new Q3HBoxLayout( 0, 0, 6, "layout13");
_altFrame = new Q3Frame( this, "_altFrame" );
_altFrame->setSizePolicy( QSizePolicy( (QSizePolicy::SizeType)7, (QSizePolicy::SizeType)1, 0, 0, _altFrame->sizePolicy().hasHeightForWidth() ) );
_altFrame->setFrameShape( Q3Frame::NoFrame );
_altFrame->setFrameShadow( Q3Frame::Raised );
layout13->addWidget( _altFrame );
Q3VBoxLayout * layout12 = new Q3VBoxLayout( 0, 0, 6, "layout12");
_close = new QPushButton( tr( "&Close" ), this, "_close" );
_close->setAccel( QKeySequence( tr( "Alt+C" ) ) );
layout12->addWidget( _close );
_select = new QPushButton( tr( "&Select" ), this, "_select" );
_select->setAccel( QKeySequence( tr( "Alt+S" ) ) );
_select->setEnabled(FALSE);
layout12->addWidget( _select );
QSpacerItem* spacer = new QSpacerItem( 20, 0, QSizePolicy::Minimum, QSizePolicy::Minimum );
layout12->addItem( spacer );
layout13->addLayout( layout12 );
XListDialogLayout->addLayout( layout13 );
_listLabel = new QLabel( tr( "List:" ), this, "_listLabel" );
XListDialogLayout->addWidget( _listLabel );
_list = new XListView( this, "_list" );
XListDialogLayout->addWidget( _list );
setCaption( tr( "XListDialog" ) );
resize( QSize(420, 380).expandedTo(minimumSizeHint()) );
//clearWState( WState_Polished );
setTabOrder(_list, _select);
setTabOrder(_select, _close);
setTabOrder(_close, _list);
_select->setFocus();
// signals and slots connections
connect( _close, SIGNAL( clicked() ), this, SLOT( sClose() ) );
connect( _select, SIGNAL( clicked() ), this, SLOT( sSelect() ) );
connect( _list, SIGNAL( itemSelected(int) ), _select, SLOT( animateClick() ) );
connect( _list, SIGNAL( valid(bool) ), _select, SLOT( setEnabled(bool) ) );
}
void StocksDialog::createDataPage ()
{
QWidget *w = new QWidget(this);
Q3VBoxLayout *vbox = new Q3VBoxLayout(w);
vbox->setMargin(5);
vbox->setSpacing(0);
barEdit = new BarEdit(w);
QString s = tr("Open");
QString s2 = "Open";
barEdit->createField(s, s2, FALSE);
s = tr("High");
s2 = "High";
barEdit->createField(s, s2, FALSE);
s = tr("Low");
s2 = "Low";
barEdit->createField(s, s2, FALSE);
s = tr("Close");
s2 = "Close";
barEdit->createField(s, s2, FALSE);
s = tr("Volume");
s2 = "Volume";
barEdit->createField(s, s2, FALSE);
connect(barEdit, SIGNAL(signalDeleteRecord()), this, SLOT(deleteRecord()));
connect(barEdit, SIGNAL(signalSaveRecord()), this, SLOT(saveRecord()));
connect(barEdit, SIGNAL(signalSearch(QDateTime)), this, SLOT(slotDateSearch(QDateTime)));
connect(barEdit, SIGNAL(signalFirstRecord()), this, SLOT(slotFirstRecord()));
connect(barEdit, SIGNAL(signalLastRecord()), this, SLOT(slotLastRecord()));
connect(barEdit, SIGNAL(signalPrevRecord()), this, SLOT(slotPrevRecord()));
connect(barEdit, SIGNAL(signalNextRecord()), this, SLOT(slotNextRecord()));
vbox->addWidget(barEdit);
addTab(w, tr("Data"));
}
// -------------------------------------------------------------------------------------------------
TriggerWidget::TriggerWidget(QWidget* parent, const char* name)
throw ()
: QWidget(parent, name)
{
Q3VBoxLayout* boxLayout = new Q3VBoxLayout(this, 0, 0);
Q3HBox* hbox = new Q3HBox(this);
hbox->setSpacing(2);
// create the checkboxes with their labels
for (int i = 0; i < NUMBER_OF_BITS_PER_BYTE; i++) {
Q3VBox* box = new Q3VBox(hbox);
box->setSpacing(2);
m_labels[i] = new QLabel(QString::number(i+1), box);
m_labels[i]->setAlignment(Qt::AlignHCenter);
m_checkboxes[i] = new QCheckBox(box);
m_checkboxes[i]->setTristate(true);
m_checkboxes[i]->setNoChange();
connect(m_checkboxes[i], SIGNAL(stateChanged(int)), SLOT(valueChangedHandler()));
}
boxLayout->addWidget(hbox);
boxLayout->addStretch(5);
}
RenameImagesDialog::RenameImagesDialog(const KUrl::List& images,
KIPI::Interface* interface,
QWidget* parent)
: KDialog(parent)
{
setCaption(i18n("Rename Images"));
setModal(true);
setButtons(Help | User1 | Close);
setButtonText(User1, i18n("&Start"));
setDefaultButton(Close);
// About data and help button.
m_about = new KIPIPlugins::KPAboutData(ki18n("Batch-rename images"),
QByteArray(),
KAboutData::License_GPL,
ki18n("A Kipi plugin to batch-rename images"),
ki18n("(c) 2003-2007, Gilles Caulier"));
m_about->addAuthor(ki18n("Gilles Caulier"), ki18n("Author and maintainer"),
"caulier dot gilles at gmail dot com");
DialogUtils::setupHelpButton(this, m_about);
// gui
QWidget* box = new QWidget(this);
setMainWidget(box);
Q3VBoxLayout* lay = new Q3VBoxLayout(box);
m_widget = new RenameImagesWidget(box, interface, images);
lay->addWidget(m_widget);
connect(this, SIGNAL(user1Clicked()),
m_widget, SLOT(slotStart()));
adjustSize();
}
//===========================================================
//
void ImportWizard::setupDst()
{
m_dstPage = new QWidget(this);
Q3VBoxLayout *vbox = new Q3VBoxLayout(m_dstPage, KDialog::marginHint());
m_dstConn = new KexiConnSelectorWidget(Kexi::connset(),
"kfiledialog:///ProjectMigrationDestinationDir",
KAbstractFileWidget::Saving, m_dstPage);
m_dstConn->hideHelpers();
//me: Can't connect m_dstConn->m_fileDlg here, it doesn't exist yet
//connect(this, SLOT(next()), m_dstConn->m_fileDlg, SIGNAL(accepted()));
vbox->addWidget(m_dstConn);
connect(m_dstConn, SIGNAL(connectionItemExecuted(ConnectionDataLVItem*)),
this, SLOT(next()));
// m_dstConn->hideHelpers();
m_dstConn->showSimpleConn();
//anyway, db files will be _saved_
m_dstConn->fileWidget->setMode(KexiStartupFileWidget::SavingFileBasedDB);
// m_dstConn->hideHelpers();
// m_dstConn->m_file->btn_advanced->hide();
// m_dstConn->m_file->label->hide();
// m_dstConn->m_file->lbl->hide();
//m_dstConn->m_file->spacer7->hide();
//js dstNewDBName = new KLineEdit(dstControls);
// dstNewDBName->setText(i18n("Enter new database name here"));
addPage(m_dstPage, i18n("Select Location for Destination Database"));
}
CColorDialog::CColorDialog (QWidget * parent, const char *name, F4lmApp * p):
QWidget (parent, name)
{
//QColor renk;
//renk=QColorDialog::getColor(renk,this);
realp = p;
Q3VBoxLayout *topLayout = new Q3VBoxLayout (this);
Q3ButtonGroup *ToolsButtonGroup =new Q3ButtonGroup (this, "ToolsButtonGroup");
ToolsButtonGroup->setGeometry (QRect (150, 70, 71, 291));
ToolsButtonGroup->setLineWidth (0);
ToolsButtonGroup->setTitle (trUtf8 (""));
QToolButton *ToolButton1 =new QToolButton (ToolsButtonGroup, "ToolButton1");
ToolButton1->setGeometry (QRect (0, 10, 30, 30));
ToolButton1->setText (trUtf8 ("CC"));
connect (ToolButton1, SIGNAL (clicked ()), this,SLOT (slotColorChooser ()));
QToolButton *ToolButton2 =new QToolButton (ToolsButtonGroup, "ToolButton2");
ToolButton2->setGeometry (QRect (30, 10, 30, 30));
ToolButton2->setText (trUtf8 ("..."));
//CColorSwatches* s=new CColorSwatches(this,"color_swatches",p);
topLayout->addWidget (ToolsButtonGroup);
//topLayout->addWidget(s);
}
//===========================================================
//
void ImportWizard::setupIntro()
{
m_introPage = new QWidget(this);
Q3VBoxLayout *vbox = new Q3VBoxLayout(m_introPage, KDialog::marginHint());
QLabel *lblIntro = new QLabel(m_introPage);
lblIntro->setAlignment(Qt::AlignTop | Qt::AlignLeft);
lblIntro->setWordWrap(true);
QString msg;
if (m_predefinedConnectionData) { //predefined import: server source
msg = i18n("<qt>Database Importing wizard is about to import \"%1\" database "
"<nobr>(connection %2)</nobr> into a Kexi database.</qt>",
m_predefinedDatabaseName, m_predefinedConnectionData->serverInfoString());
} else if (!m_predefinedDatabaseName.isEmpty()) { //predefined import: file source
//! @todo this message is currently ok for files only
KMimeType::Ptr mimeTypePtr = KMimeType::mimeType(m_predefinedMimeType);
if (mimeTypePtr.isNull())
KexiDBWarn << QString("'%1' mimetype not installed!").arg(m_predefinedMimeType);
msg = i18n(
"<qt>Database Importing wizard is about to import <nobr>\"%1\"</nobr> file "
"of type \"%2\" into a Kexi database.</qt>",
QDir::convertSeparators(m_predefinedDatabaseName), mimeTypePtr ? mimeTypePtr->comment() : "???");
} else {
msg = i18n("Database Importing wizard allows you to import an existing database "
"into a Kexi database.");
}
lblIntro->setText(msg + "\n\n"
+ i18n("Click \"Next\" button to continue or \"Cancel\" button to exit this wizard."));
vbox->addWidget(lblIntro);
addPage(m_introPage, i18n("Welcome to the Database Importing Wizard"));
}
ReferenceDialog::ReferenceDialog(BrowserNode * bn)
: QDialog(0, "Referenced By dialog", FALSE, Qt::WDestructiveClose)
{
the = this;
target = bn;
setCaption(TR("Referenced By dialog"));
Q3VBoxLayout * vbox = new Q3VBoxLayout(this);
vbox->setMargin(5);
QString s = target->get_name();
s += TR(" is referenced by :");
vbox->addWidget(new QLabel(s, this));
results = new Q3ComboBox(FALSE, this);
vbox->addWidget(results);
Q3HBoxLayout * hbox = new Q3HBoxLayout(vbox);
QPushButton * search_b = new QPushButton(TR("Recompute"), this);
QPushButton * close_b = new QPushButton(TR("Close"), this);
hbox->setMargin(5);
hbox->addWidget(search_b);
hbox->addWidget(select_b = new QPushButton(TR("Select"), this));
hbox->addWidget(mark_unmark_b = new QPushButton(TR("Unmark"), this));
hbox->addWidget(mark_them_b = new QPushButton(TR("Mark them"), this));
hbox->addWidget(unmark_all_b = new QPushButton(TR("Unmark all"), this));
hbox->addWidget(close_b);
search_b->setDefault(TRUE);
connect(search_b, SIGNAL(clicked()), this, SLOT(compute()));
connect(select_b, SIGNAL(clicked()), this, SLOT(select()));
connect(close_b, SIGNAL(clicked()), this, SLOT(reject()));
connect(mark_unmark_b, SIGNAL(clicked()), this, SLOT(mark_unmark()));
connect(mark_them_b, SIGNAL(clicked()), this, SLOT(mark_them()));
connect(unmark_all_b, SIGNAL(clicked()), this, SLOT(unmark_all()));
connect(results, SIGNAL(activated(int)), this, SLOT(selected(int)));
compute();
open_dialog(this);
}
KexiCSVInfoLabel::KexiCSVInfoLabel(const QString& labelText, QWidget* parent)
: QWidget(parent)
{
Q3VBoxLayout *vbox = new Q3VBoxLayout(this, 0, KDialog::spacingHint());
Q3HBoxLayout *hbox = new Q3HBoxLayout(this);
vbox->addLayout(hbox);
m_leftLabel = new QLabel(labelText, this);
m_leftLabel->setMinimumWidth(130);
m_leftLabel->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Preferred);
m_leftLabel->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
m_leftLabel->setWordWrap(true);
hbox->addWidget(m_leftLabel);
m_iconLbl = new QLabel(this);
m_iconLbl->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Preferred);
m_iconLbl->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
m_fnameLbl = new QLabel(this);
m_fnameLbl->setOpenExternalLinks(true);
m_fnameLbl->setTextInteractionFlags(Qt::TextSelectableByMouse | Qt::TextSelectableByKeyboard);
m_fnameLbl->setFocusPolicy(Qt::NoFocus);
m_fnameLbl->setTextFormat(Qt::PlainText);
m_fnameLbl->setSizePolicy(QSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding, 1, 0));
m_fnameLbl->setLineWidth(1);
m_fnameLbl->setFrameStyle(Q3Frame::Box);
m_fnameLbl->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
m_fnameLbl->setWordWrap(true);
hbox->addSpacing(5);
hbox->addWidget(m_iconLbl);
hbox->addWidget(m_fnameLbl, 1, Qt::AlignVCenter | Qt::AlignLeft
#ifdef __GNUC__
#warning TODO | Qt::TextWordWrap
#else
#pragma WARNING( TODO | Qt::TextWordWrap )
#endif
);
hbox->addSpacing(10);
m_commentLbl = new QLabel(this);
m_commentLbl->setOpenExternalLinks(true);
m_commentLbl->setTextInteractionFlags(Qt::TextSelectableByMouse | Qt::TextSelectableByKeyboard);
m_commentLbl->setFocusPolicy(Qt::NoFocus);
m_commentLbl->setTextFormat(Qt::PlainText);
m_commentLbl->setSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding);
m_commentLbl->setLineWidth(1);
m_commentLbl->setFrameStyle(QFrame::Box);
m_commentLbl->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
m_commentLbl->setWordWrap(true);
hbox->addWidget(m_commentLbl, 0, Qt::AlignVCenter | Qt::AlignRight
#ifdef __GNUC__
#warning TODO | Qt::TextWordWrap
#else
#pragma WARNING( TODO | Qt::TextWordWrap )
#endif
);
m_separator = new Q3Frame(this);
m_separator->setFrameShape(Q3Frame::HLine);
m_separator->setFrameShadow(Q3Frame::Sunken);
vbox->addWidget(m_separator);
}
void StocksDialog::createFundamentalsPage ()
{
QWidget *w = new QWidget(this);
Q3VBoxLayout *vbox = new Q3VBoxLayout(w);
vbox->setMargin(5);
vbox->setSpacing(5);
Setting fund;
QString s, s2;
index->getFundamentals(symbol, s2);
fund.parse(s2);
s = tr("Fundamentals: last updated ");
s2 = "updateDate";
QString s3;
fund.getData(s2, s3);
s.append(s3);
fund.remove(s2);
QStringList key;
fund.getKeyList(key);
key.sort();
vbox->addSpacing(10);
QLabel *label = new QLabel(s, w);
vbox->addWidget(label);
fundView = new Q3ListView(w);
fundView->addColumn(tr("Description"));
fundView->addColumn(tr("Value"));
vbox->addWidget(fundView);
int loop;
for (loop = 0; loop < (int) key.count(); loop++)
{
fund.getData(key[loop], s);
new Q3ListViewItem(fundView, key[loop], s);
}
if (! key.count())
new Q3ListViewItem(fundView, tr("No data available."));
addTab(w, tr("Fundamentals"));
}
FileListDialog::FileListDialog(QWidget* parent,
QString const& _dialogTitle,
QString const& _listTitle,
char const * _filters[]) :
QDialog(parent, "FileListDialog", TRUE), // TRUE = modal dialog
list_(NULL),
delButton_(NULL),
fileDialog_(NULL),
modified_(false)
{
resize(300, 200);
setCaption(_dialogTitle);
Q3VBoxLayout * topBox = new Q3VBoxLayout(this, 0, -1, "boxLayout");
Q3VGroupBox * fileBox = new Q3VGroupBox(this, "fileBox");
list_ = new Q3ListBox(fileBox, "list");
Q3HBox * fileButtonsBox = new Q3HBox(fileBox, "fileButtons");
QPushButton * addButton = new QPushButton("Add...", fileButtonsBox);
delButton_ = new QPushButton("Remove", fileButtonsBox);
fileDialog_ = new Q3FileDialog(this, "config file dialog", TRUE);
topBox->addSpacing(10);
topBox->addWidget(fileBox);
fileBox->setTitle(_listTitle);
topBox->addSpacing(10);
Q3HBoxLayout * dialogButtonsBox = new Q3HBoxLayout(topBox, -1, "hBoxLayout");
QSpacerItem * dBSpace = new QSpacerItem(0, 0);
QPushButton * okButton = new QPushButton("OK", this);
QPushButton * cancelButton = new QPushButton("Cancel", this);
topBox->addSpacing(5);
dialogButtonsBox->addItem(dBSpace);
dialogButtonsBox->addWidget(okButton);
dialogButtonsBox->addSpacing(5);
dialogButtonsBox->addWidget(cancelButton);
dialogButtonsBox->addSpacing(5);
okButton->setDefault(true);
static const char * filters[3] = { "all files (*)", NULL };
fileDialog_->setCaption("File open dialog");
fileDialog_->setFilters((_filters == NULL)? filters : _filters);
// connect the dialogs functionality
connect(okButton, SIGNAL(clicked()), SLOT(accept()));
connect(cancelButton, SIGNAL(clicked()), SLOT(reject()));
connect(addButton, SIGNAL(clicked()), SLOT(add()));
connect(delButton_, SIGNAL(clicked()), SLOT(del()));
selectListItem();
}
ScannerPage::ScannerPage (QWidget *w, DBIndex *i) : QWidget (w)
{
chartIndex = i;
idir.setFilter(QDir::Files);
Q3VBoxLayout *vbox = new Q3VBoxLayout(this);
vbox->setMargin(0);
vbox->setSpacing(5);
search = new QLineEdit(this);
search->setText("*");
connect(search, SIGNAL(textChanged(const QString &)), this, SLOT(searchChanged(const QString &)));
QToolTip::add(search, tr("List Filter, e.g. s* or sb*"));
vbox->addWidget(search);
list = new Q3ListBox(this);
connect(list, SIGNAL(contextMenuRequested(Q3ListBoxItem *, const QPoint &)), this,
SLOT(rightClick(Q3ListBoxItem *)));
connect(list, SIGNAL(highlighted(const QString &)), this, SLOT(scannerSelected(const QString &)));
connect(list, SIGNAL(doubleClicked(Q3ListBoxItem *)), this, SLOT(doubleClick(Q3ListBoxItem *)));
vbox->addWidget(list);
menu = new QMenu(this);
menu->insertItem(QPixmap(newchart), tr("&New Scanner Ctrl+N"), this, SLOT(newScanner()));
menu->insertItem(QPixmap(openitem), tr("&Open Scanner Ctrl+O"), this, SLOT(openScanner()));
menu->insertItem(QPixmap(deleteitem), tr("&Delete Scanner Ctrl+D"), this, SLOT(deleteScanner()));
menu->insertItem(QPixmap(renameitem), tr("&Rename Scanner Ctrl+R"), this, SLOT(renameScanner()));
menu->insertItem(QPixmap(macro), tr("R&un Scanner Ctrl+U"), this, SLOT(runScanner()));
menu->insertSeparator(-1);
menu->insertItem(QPixmap(help), tr("&Help Ctrl+H"), this, SLOT(slotHelp()));
Q3Accel *a = new Q3Accel(this);
connect(a, SIGNAL(activated(int)), this, SLOT(slotAccel(int)));
a->insertItem(Qt::CTRL+Qt::Key_N, NewScanner);
a->insertItem(Qt::CTRL+Qt::Key_O, OpenScanner);
a->insertItem(Qt::CTRL+Qt::Key_D, DeleteScanner);
a->insertItem(Qt::CTRL+Qt::Key_R, RenameScanner);
a->insertItem(Qt::CTRL+Qt::Key_U, RunScanner);
a->insertItem(Qt::CTRL+Qt::Key_H, Help);
refreshList();
scannerSelected(QString());
}
//===========================================================
//
void ImportWizard::setupFinish()
{
m_finishPage = new QWidget(this);
m_finishPage->hide();
Q3VBoxLayout *vbox = new Q3VBoxLayout(m_finishPage, KDialog::marginHint());
m_finishLbl = new QLabel(m_finishPage);
m_finishLbl->setAlignment(Qt::AlignTop | Qt::AlignLeft);
m_finishLbl->setWordWrap(true);
vbox->addWidget(m_finishLbl);
m_openImportedProjectCheckBox = new QCheckBox(i18n("Open imported project"),
m_finishPage);
m_openImportedProjectCheckBox->setChecked(true);
vbox->addSpacing(KDialog::spacingHint());
vbox->addWidget(m_openImportedProjectCheckBox);
vbox->addStretch(1);
addPage(m_finishPage, i18n("Success"));
}
OptionsExportMusixtex::OptionsExportMusixtex(KSharedConfigPtr &conf, QWidget *parent, const char *name)
: OptionsPage(conf, parent, name)
{
// Create option widgets
Q3VButtonGroup *layoutGroup = new Q3VButtonGroup(i18n("MusiXTeX Layout"), this);
showBarNumber = new QCheckBox(i18n("Show Bar Number"), layoutGroup);
showStr = new QCheckBox(i18n("Show Tuning"), layoutGroup);
showPageNumber = new QCheckBox(i18n("Show Page Number"), layoutGroup);
exportModeGroup = new Q3VButtonGroup(i18n("Export as..."), this);
exportMode[0] = new QRadioButton(i18n("Tabulature"), exportModeGroup);
exportMode[1] = new QRadioButton(i18n("Notes"), exportModeGroup);
tabSizeGroup = new Q3VButtonGroup(i18n("Tab Size"), this);
tabSize[0] = new QRadioButton(i18n("Smallest"), tabSizeGroup);
tabSize[1] = new QRadioButton(i18n("Small"), tabSizeGroup);
tabSize[2] = new QRadioButton(i18n("Normal"), tabSizeGroup);
tabSize[3] = new QRadioButton(i18n("Big"), tabSizeGroup);
always = new QCheckBox(i18n("Always show this dialog on export"), this);
// Set widget layout
Q3VBoxLayout *box = new Q3VBoxLayout(this);
box->addWidget(layoutGroup);
box->addWidget(tabSizeGroup);
box->addWidget(exportModeGroup);
box->addStretch(1);
box->addWidget(always);
box->activate();
// Fill in current config
tabSizeGroup->setButton(Settings::texTabSize());
showBarNumber->setChecked(Settings::texShowBarNumber());
showStr->setChecked(Settings::texShowStr());
showPageNumber->setChecked(Settings::texShowPageNumber());
exportModeGroup->setButton(Settings::texExportMode());
always->setChecked(config->group("MusiXTeX").readEntry("AlwaysShow", TRUE));
}
//===========================================================
//
void ImportWizard::setupImporting()
{
m_importingPage = new QWidget(this);
m_importingPage->hide();
Q3VBoxLayout *vbox = new Q3VBoxLayout(m_importingPage, KDialog::marginHint());
m_lblImportingTxt = new QLabel(m_importingPage);
m_lblImportingTxt->setAlignment(Qt::AlignTop | Qt::AlignLeft);
m_lblImportingTxt->setWordWrap(true);
m_lblImportingErrTxt = new QLabel(m_importingPage);
m_lblImportingErrTxt->setAlignment(Qt::AlignTop | Qt::AlignLeft);
m_lblImportingErrTxt->setWordWrap(true);
m_progressBar = new QProgressBar(m_importingPage);
m_progressBar->setRange(0, 100);
m_progressBar->hide();
vbox->addWidget(m_lblImportingTxt);
vbox->addWidget(m_lblImportingErrTxt);
vbox->addStretch(1);
QWidget *options_widget = new QWidget(m_importingPage);
vbox->addWidget(options_widget);
QVBoxLayout *options_vbox = new QVBoxLayout(options_widget);
options_vbox->setSpacing(KDialog::spacingHint());
m_importOptionsButton = new KPushButton(KIcon("configure"),
i18n("Advanced Options"), options_widget);
connect(m_importOptionsButton, SIGNAL(clicked()),
this, SLOT(slotOptionsButtonClicked()));
options_vbox->addWidget(m_importOptionsButton);
options_vbox->addStretch(1);
vbox->addWidget(m_progressBar);
vbox->addStretch(2);
m_importingPage->show();
addPage(m_importingPage, i18n("Importing"));
}
//===========================================================
//
void ImportWizard::setupImportType()
{
m_importTypePage = new QWidget(this);
Q3VBoxLayout *vbox = new Q3VBoxLayout(m_importTypePage, KDialog::marginHint());
m_importTypeButtonGroup = new Q3VButtonGroup(m_importTypePage);
m_importTypeButtonGroup->setLineWidth(0);
vbox->addWidget(m_importTypeButtonGroup);
(void)new QRadioButton(i18n("Structure and data"), m_importTypeButtonGroup);
(void)new QRadioButton(i18n("Structure only"), m_importTypeButtonGroup);
m_importTypeButtonGroup->setExclusive(true);
m_importTypeButtonGroup->setButton(0);
addPage(m_importTypePage, i18n("Select Type of Import"));
}
StringListEdit::StringListEdit(const QStringList &list,
UntitledList* unamedList,
QWidget *parent)
: QDialog(parent),
ask(false),
duplicatesOk(false),
_suggestedStringsList(unamedList)
{
addCaption = "Add String";
addLabel = "String:";
editCaption = "Edit String";
editLabel = addLabel;
Q3HBoxLayout *hbox = new Q3HBoxLayout(this, 5, 5);
Q3VBoxLayout *vbox = new Q3VBoxLayout;
listBox = new Q3ListBox(this);
connect(listBox, SIGNAL(currentChanged(Q3ListBoxItem*)),
this, SLOT(updateButtons()));
hbox->addWidget(listBox, 1);
QPushButton *button = new QPushButton(tr("&Add..."), this);
connect(button, SIGNAL(clicked()), this, SLOT(addString()));
vbox->addWidget(button);
editButton = new QPushButton(tr("&Edit..."), this);
connect(editButton, SIGNAL(clicked()), this, SLOT(editString()));
vbox->addWidget(editButton);
removeButton = new QPushButton(tr("&Remove..."), this);
connect(removeButton, SIGNAL(clicked()), this, SLOT(removeString()));
vbox->addWidget(removeButton);
upButton = new QPushButton(tr("&Up"), this);
connect(upButton, SIGNAL(clicked()), this, SLOT(moveUp()));
vbox->addWidget(upButton);
downButton = new QPushButton(tr("&Down"), this);
connect(downButton, SIGNAL(clicked()), this, SLOT(moveDown()));
vbox->addWidget(downButton);
vbox->addStretch(1);
button = new QPushButton(tr("OK"), this);
connect(button, SIGNAL(clicked()), this, SLOT(accept()));
vbox->addWidget(button);
button = new QPushButton(tr("Cancel"), this);
connect(button, SIGNAL(clicked()), this, SLOT(reject()));
vbox->addWidget(button);
hbox->addLayout(vbox);
setList(list);
}
OperationListDialog::OperationListDialog(const char * m,
Q3PtrList<BrowserOperation> & l)
: QDialog(0, m, TRUE) {
setCaption(m);
move(QCursor::pos());
Q3VBoxLayout * vbox = new Q3VBoxLayout(this);
Q3HBoxLayout * hbox;
vbox->setMargin(5);
cb = new Q3ComboBox(FALSE, this);
vbox->addWidget(cb);
for (BrowserOperation * oper = l.first(); oper; oper = l.next()) {
QString s = ((BrowserNode *) oper->parent())->get_name() +
QString("::") + oper->get_data()->definition(TRUE, FALSE);
if (((OperationData *) oper->get_data())->get_is_abstract())
cb->insertItem("[a] " + s);
else
cb->insertItem(s);
}
hbox = new Q3HBoxLayout(vbox);
hbox->setMargin(5);
QPushButton * ok = new QPushButton(TR("&OK"), this);
QPushButton * cancel = new QPushButton(TR("&Cancel"), this);
QSize bs(cancel->sizeHint());
ok->setDefault(TRUE);
ok->setFixedSize(bs);
cancel->setFixedSize(bs);
hbox->addWidget(ok);
hbox->addWidget(cancel);
UmlDesktop::limitsize_center(this, previous_size, 0.8, 0.8);
connect(ok, SIGNAL(clicked()), this, SLOT(accept()));
connect(cancel, SIGNAL(clicked()), this, SLOT(reject()));
}
void ImportWizard::arriveSrcDBPage()
{
if (fileBasedSrcSelected()) {
//! @todo Back button doesn't work after selecting a file to import
//moved showPage(m_dstTypePage);
} else if (!m_srcDBName) {
m_srcDBPage->hide();
kDebug() << "Looks like we need a project selector widget!";
KexiDB::ConnectionData* condata = m_srcConn->selectedConnectionData();
if (condata) {
m_prjSet = new KexiProjectSet(*condata);
Q3VBoxLayout *vbox = new Q3VBoxLayout(m_srcDBPage, KDialog::marginHint());
m_srcDBName = new KexiProjectSelectorWidget(m_srcDBPage, m_prjSet);
vbox->addWidget(m_srcDBName);
m_srcDBName->label()->setText(i18n("Select source database you wish to import:"));
}
m_srcDBPage->show();
}
}
F4lmView::F4lmView (F4lmDoc * pDoc, QWidget * parent, const char *name, Qt::WindowFlags wflags)
:QWidget (parent, name, wflags) {
setName ("F4lmView");
dad = (F4lmApp *) parentWidget ()->parent ()->parent ();
doc = pDoc;
resize (700, 600);
setIcon (QPixmap ((const char **) main_doc_ico_xpm));
layerNum = 1;
defSceneHeight = 440;
defSceneWidth = 550;
defSceneRect = QRect (600, 600, defSceneWidth, defSceneHeight);
Q3VBoxLayout * topLayout = new Q3VBoxLayout (this);
CLayer * layer1 = new CLayer (this, "layer 1");
mainCanvas = new CCanvas (this, "mc");
CSceneRect * defrect = new CSceneRect (defSceneRect, mainCanvas);
defrect->setBrush (QColor (255, 255, 255));
defrect->setZ (1<<31);//smallest integer.....
//qDebug("%d",1<<31);
defrect->show ();
mainCanvas->resize (defSceneWidth + defSceneWidth + 600,defSceneHeight + defSceneHeight + 600);
mainCanvas->setBackgroundColor (QColor (208, 208, 208));
doc->pLayerList->append (layer1);
canvasViewer = new canview (mainCanvas, this, "Canvas viewer");
canvasViewer->scrollBy (550, 550);
topLayout->addWidget (canvasViewer);
defObjID = 0;
//this means first color for drawing is black
defObjCOLOR = QColor (0, 0, 0);
//qDebug(QString::number(defObjCOLOR.red()));
/*boundaries=new QValueVector<canvasBoundaries>();
canvasBoundaries tcanvb;
tcanvb.canvasLimitsForTable[0][0]=layerNum;
tcanvb.canvasLimitsForTable[0][1]=0;
tcanvb.canvasLimitsForTable[0][2]=0;
boundaries->push_back(tcanvb); */
}
void StocksDialog::createSplitPage ()
{
QWidget *w = new QWidget(this);
Q3VBoxLayout *vbox = new Q3VBoxLayout(w);
vbox->setMargin(5);
vbox->setSpacing(5);
Q3GridLayout *grid = new Q3GridLayout(vbox);
grid->setMargin(0);
grid->setSpacing(5);
QLabel *label = new QLabel(tr("Split Date"), w);
grid->addWidget(label, 0, 0);
Bar bar;
db->getLastBar(bar);
QDateTime dt;
bar.getDate(dt);
if (! bar.getEmptyFlag())
splitDate = new Q3DateEdit(dt.date(), w);
else
splitDate = new Q3DateEdit(QDate::currentDate(), w);
splitDate->setOrder(Q3DateEdit::YMD);
grid->addWidget(splitDate, 0, 1);
label = new QLabel(tr("Split Ratio"), w);
grid->addWidget(label, 1, 0);
splitRatio = new QLineEdit("2:1", w);
grid->addWidget(splitRatio, 1, 1);
QPushButton *button = new QPushButton(tr("Perform Split"), w);
connect(button, SIGNAL(clicked()), this, SLOT(split()));
vbox->addWidget(button);
vbox->addStretch(1);
addTab(w, tr("Split"));
}
ClassListDialog::ClassListDialog(const char * m,
const Q3ValueList<BrowserClass *> & l)
: QDialog(0, m, TRUE) {
setCaption(m);
move(QCursor::pos());
Q3VBoxLayout * vbox = new Q3VBoxLayout(this);
Q3HBoxLayout * hbox;
vbox->setMargin(5);
cb = new Q3ComboBox(FALSE, this);
vbox->addWidget(cb);
Q3ValueList<BrowserClass *>::ConstIterator end = l.end();
Q3ValueList<BrowserClass *>::ConstIterator it;
for (it = l.begin(); it != end; ++it)
if (!(*it)->deletedp())
cb->insertItem((*it)->full_name(TRUE));
hbox = new Q3HBoxLayout(vbox);
hbox->setMargin(5);
QPushButton * ok = new QPushButton(TR("&OK"), this);
QPushButton * cancel = new QPushButton(TR("&Cancel"), this);
QSize bs(cancel->sizeHint());
ok->setDefault(TRUE);
ok->setFixedSize(bs);
cancel->setFixedSize(bs);
hbox->addWidget(ok);
hbox->addWidget(cancel);
connect(ok, SIGNAL(clicked()), this, SLOT(accept()));
connect(cancel, SIGNAL(clicked()), this, SLOT(reject()));
UmlDesktop::limitsize_center(this, previous_size, 0.8, 0.8);
}
CodAddMsgDialog::CodAddMsgDialog(CodObjCanvas * from, CodObjCanvas * to,
CodMsgSupport * i, ColDiagramView * v,
bool fo)
: QDialog(0, "add msg dialog", TRUE), in(i), view(v), forward(fo)
{
setCaption(TR("Add message dialog"));
Q3VBoxLayout * vbox = new Q3VBoxLayout(this);
Q3HBoxLayout * hbox;
vbox->setMargin(5);
hbox = new Q3HBoxLayout(vbox);
hbox->setMargin(10);
QLabel * label1 = new QLabel(TR("Add message to %1", to->get_full_name()), this);
label1->setAlignment(Qt::AlignCenter);
hbox->addWidget(label1);
Q3Grid * grid = new Q3Grid(2, this);
vbox->addWidget(grid);
new QLabel(TR("rank : "), grid);
cbrank = new Q3ComboBox(FALSE, grid);
ColMsgList all_in;
ColMsgList all_out;
from->get_all_in_all_out(all_in, all_out);
QStringList new_ones;
foreach (ColMsg *m, all_out) {
QString s = m->next_hierarchical_rank();
if ((s.find('.') != - 1) && (ColMsg::find(s, all_out) == 0)) {
cbrank->insertItem(QString::number(m->get_rank() + 1) + " : " + s);
new_ones.append(s);
}
}
//===========================================================
//
void ImportWizard::setupSrcConn()
{
m_srcConnPage = new QWidget(this);
Q3VBoxLayout *vbox = new Q3VBoxLayout(m_srcConnPage, KDialog::marginHint());
m_srcConn = new KexiConnSelectorWidget(Kexi::connset(),
"kfiledialog:///ProjectMigrationSourceDir",
KAbstractFileWidget::Opening, m_srcConnPage);
m_srcConn->hideConnectonIcon();
m_srcConn->showSimpleConn();
QSet<QString> excludedFilters;
//! @todo remove when support for kexi files as source prj is added in migration
excludedFilters += KexiDB::defaultFileBasedDriverMimeType();
excludedFilters += "application/x-kexiproject-shortcut";
excludedFilters += "application/x-kexi-connectiondata";
m_srcConn->fileWidget->setExcludedFilters(excludedFilters);
// m_srcConn->hideHelpers();
vbox->addWidget(m_srcConn);
addPage(m_srcConnPage, i18n("Select Location for Source Database"));
}