/**
* @brief Flushes output stream and closes stream if requested.
* @param Whether to close the current stream. Defaults to true.
*/
void Logger::closeLogger(bool closeStream)
{
if (outputStream)
{
outputStream->flush();
if (closeStream && outputStream->device() != 0)
{
QIODevice *device = outputStream->device();
if (device->isOpen())
{
device->close();
}
}
}
if (errorStream)
{
errorStream->flush();
if (closeStream && errorStream->device() != 0)
{
QIODevice *device = errorStream->device();
if (device->isOpen())
{
device->close();
}
}
}
instance->pendingTimer.stop();
instance = 0;
}
void Worker::peerReadyReadHandler(void)
{
QIODevice* peer = qobject_cast<QIODevice*>(this->sender());
Q_ASSERT(peer != 0);
if (this->m_state == Worker::ErrorState) {
// Peer has not disconnected (though it should have) - closing the connection
Q_EMIT this->error(Worker::UnknownError);
peer->close();
return;
}
QByteArray buf;
buf = peer->readAll();
this->m_buf.append(buf);
bool cont;
do {
cont = false;
switch(this->m_state) {
case Worker::ConnectedState:
cont = this->readGreeting();
break;
case Worker::GreetingReceivedState:
this->parseGreeting();
break;
case Worker::AwaitingAuthenticationState:
this->authenticate();
break;
case Worker::AwaitingRequestState:
this->parseRequest();
break;
case Worker::RequestReceivedState:
this->m_state = Worker::FatalErrorState;
break;
case Worker::ConnectionProxiedState:
Q_ASSERT(this->m_target != 0);
this->m_target->write(this->m_buf);
this->m_target->flush();
this->m_buf.clear();
break;
case Worker::ErrorState:
case Worker::FatalErrorState:
Q_ASSERT(false);
break;
}
} while (cont);
if (this->m_state == Worker::FatalErrorState) {
peer->close();
}
}
void test_block(const QString &fileName)
{
QIODevice *dev = KFilterDev::deviceForFile(fileName);
if(!dev)
{
kdWarning() << "dev=0" << endl;
return;
}
if(!dev->open(IO_ReadOnly))
{
kdWarning() << "open failed " << endl;
return;
}
// This is what KGzipDev::readAll could do, if QIODevice::readAll was virtual....
QByteArray array(1024);
int n;
while((n = dev->readBlock(array.data(), array.size())))
{
kdDebug() << "readBlock returned " << n << endl << endl;
// QCString s(array,n+1); // Terminate with 0 before printing
// printf("%s", s.data());
kdDebug() << "dev.at = " << dev->at() << endl;
// kdDebug() << "f.at = " << f.at() << endl;
}
dev->close();
delete dev;
}
QMap<QString, StelLocation> StelLocationMgr::loadCitiesBin(const QString& fileName) const
{
QMap<QString, StelLocation> res;
QString cityDataPath;
try
{
cityDataPath = StelFileMgr::findFile(fileName);
}
catch (std::runtime_error& e)
{
return res;
}
QFile sourcefile(cityDataPath);
if (!sourcefile.open(QIODevice::ReadOnly))
{
qWarning() << "ERROR: Could not open location data file: " << cityDataPath;
return res;
}
if (fileName.endsWith(".gz"))
{
QIODevice* d = KFilterDev::device(&sourcefile, "application/x-gzip", false);
d->open(QIODevice::ReadOnly);
QDataStream in(d);
in.setVersion(QDataStream::Qt_4_6);
in >> res;
d->close();
delete d;
return res;
}
void GameState::Serialize(QIODevice& f) {
QString serialization;
QXmlStreamWriter stream(&serialization);
stream.setAutoFormatting(true);
stream.writeStartDocument();
stream.writeStartElement("SaveGame");
stream.writeStartElement("Board");
stream.writeAttribute("Width", QString::number(this->width));
stream.writeAttribute("Height", QString::number(this->height));
stream.writeAttribute("StepsPerformed", QString::number((this->stepNum)));
for (uint i = 0; i < height; i++)
{
stream.writeCharacters("\n ");
for (uint j = 0; j < width; j++)
{
stream.writeCharacters(QString::number(this->board[i][j]) + " ");
}
}
stream.writeCharacters("\n ");
stream.writeEndElement();
stream.writeEndElement();
stream.writeEndDocument();
f.open(QIODevice::WriteOnly);
f.write(serialization.toUtf8());
f.close();
}
/**
* This tests the decompression using kfilterdev, basically.
* To debug KTarPrivate::fillTempFile().
*
* @dataProvider setupData
*/
void KArchiveTest::testUncompress()
{
QFETCH(QString, fileName);
QFETCH(QString, mimeType);
// testCreateTar must have been run first.
QVERIFY(QFile::exists(fileName));
QIODevice *filterDev = KFilterDev::deviceForFile(fileName, mimeType, true);
QVERIFY(filterDev);
QByteArray buffer;
buffer.resize(8*1024);
kDebug() << "buffer.size()=" << buffer.size();
QVERIFY(filterDev->open(QIODevice::ReadOnly));
qint64 totalSize = 0;
qint64 len = -1;
while (!filterDev->atEnd() && len != 0) {
len = filterDev->read(buffer.data(), buffer.size());
QVERIFY(len >= 0);
totalSize += len;
// kDebug() << "read len=" << len << " totalSize=" << totalSize;
}
filterDev->close();
delete filterDev;
// kDebug() << "totalSize=" << totalSize;
QVERIFY(totalSize > 26000); // 27648 here when using gunzip
}
QPixmap CustomizationService::getServerLogo(const Account& account)
{
QPixmap logo = QPixmap(":/images/seafile-24.png");
if (account.serverInfo.customLogo.isEmpty()) {
return logo;
}
QUrl url = account.getAbsoluteUrl(account.serverInfo.customLogo);
QIODevice* buf = disk_cache_->data(url);
if (buf) {
logo.loadFromData(buf->readAll());
buf->close();
delete buf;
}
if (!reqs_.contains(url.toString())) {
FetchCustomLogoRequest* req = new FetchCustomLogoRequest(url);
connect(req,
SIGNAL(success(const QUrl&)),
this,
SLOT(onServerLogoFetched(const QUrl&)));
connect(req,
SIGNAL(failed(const ApiError&)),
this,
SLOT(onServerLogoFetchFailed(const ApiError&)));
req->send();
reqs_[url.toString()] = req;
}
voidpf ZCALLBACK qiodevice_open_file_func (
voidpf opaque UNUSED,
voidpf file,
int mode)
{
QIODevice *iodevice = reinterpret_cast<QIODevice*>(file);
if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
iodevice->open(QIODevice::ReadOnly);
else
if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
iodevice->open(QIODevice::ReadWrite);
else
if (mode & ZLIB_FILEFUNC_MODE_CREATE)
iodevice->open(QIODevice::WriteOnly);
if (iodevice->isOpen()) {
if (iodevice->isSequential()) {
iodevice->close();
return NULL;
} else {
return iodevice;
}
} else
return NULL;
}
/*!
Writes the contents of \a document to the text document \a content. It is left up to the
calling code to \l {QContent::commit()}{commit} the changes in \a content to the document
system.
Returns true if the write was successful and false otherwise.
*/
bool NotesDemo::writeContent( QTextDocument *document, QContent *content )
{
// Attempt to open the content in write-only mode. If the open succeeds QContent
// will construct a new I/O device and return a pointer to it, the caller takes
// ownership of the I/O device and is responsible for deleting it.
QIODevice *ioDevice = content->open( QIODevice::WriteOnly );
if ( !ioDevice ) {
qWarning() << "Could not open the new content object to write to!!";
return false;
}
// Gets the plain text content of the text document and converts it to an 8-bit
// ASCII byte array before writing it to the I/O device.
// (This assumes that the notes are short enough to fit into memory. For longer
// documents, use QTextDocument::begin(), QTextDocument::end() and QTextDocument::findBlock(int).)
int bytesWritten = ioDevice->write( document->toPlainText().toAscii() );
// Close the I/O device and delete it.
ioDevice->close();
delete ioDevice;
if ( bytesWritten < 0 ) {
qWarning() << "Error while trying to create a new notes object!!";
return false;
} else {
return true;
}
}
bool KoStorePrivate::extractFile(const QString &srcName, QIODevice &buffer)
{
if (!q->open(srcName))
return false;
if (!buffer.open(QIODevice::WriteOnly)) {
q->close();
return false;
}
// ### This could use KArchive::copy or something, no?
QByteArray data;
data.resize(8 * 1024);
uint total = 0;
for (int block = 0; (block = q->read(data.data(), data.size())) > 0; total += block) {
buffer.write(data.data(), block);
}
if (q->size() != static_cast<qint64>(-1))
Q_ASSERT(total == q->size());
buffer.close();
q->close();
return true;
}
void
MagnatuneXmlParser::readConfigFile( const QString &filename )
{
DEBUG_BLOCK
m_nNumberOfTracks = 0;
m_nNumberOfAlbums = 0;
m_nNumberOfArtists = 0;
QDomDocument doc( "config" );
if ( !QFile::exists( filename ) )
{
debug() << "Magnatune xml file does not exist";
return;
}
QIODevice *file = KFilterDev::deviceForFile( filename, "application/x-bzip2", true );
if ( !file || !file->open( QIODevice::ReadOnly ) ) {
debug() << "MagnatuneXmlParser::readConfigFile error reading file";
return ;
}
if ( !doc.setContent( file ) )
{
debug() << "MagnatuneXmlParser::readConfigFile error parsing file";
file->close();
return ;
}
file->close();
delete file;
m_dbHandler->destroyDatabase();
m_dbHandler->createDatabase();
//run through all the elements
QDomElement docElem = doc.documentElement();
m_dbHandler->begin(); //start transaction (MAJOR speedup!!)
parseElement( docElem );
m_dbHandler->commit(); //complete transaction
delete m_pCurrentArtist;
delete m_pCurrentAlbum;
return ;
}
void
KHTMLPageCacheEntry::endData()
{
m_complete = true;
m_file->write(m_buffer);
m_buffer.clear();
m_file->close();
}
void NetworkDump::Close()
{
Instance().dumpStream << QDateTime::currentDateTime().toString("dd/MM/yyyy hh:mm:ss") << " -- OpenJabNab End --" << endl;
QIODevice * d = Instance().dumpStream.device();
if (d)
{
d->close();
delete d;
}
}
/*!
* Returns the data, modified by setData if modified, for the file named \a filePath.
* \sa file(), fileData(), modifiedFile()
*/
QByteArray Archive::modifiedFileData(const QString &filePath)
{
QIODevice *io = modifiedFile(filePath);
if(io == NULL || !io->open(QIODevice::ReadOnly)) {
qWarning() << "Archive::modifiedFileData error";
return QByteArray();
}
QByteArray data = io->readAll();
io->close();
return data;
}
void
JamendoXmlParser::readConfigFile( const QString &filename )
{
if( m_aborted )
return;
m_nNumberOfTracks = 0;
m_nNumberOfAlbums = 0;
m_nNumberOfArtists = 0;
if( !QFile::exists( filename ) )
{
debug() << "jamendo xml file does not exist";
return;
}
QIODevice *file = KFilterDev::deviceForFile( filename, "application/x-gzip", true );
if( !file || !file->open( QIODevice::ReadOnly ) )
{
debug() << "JamendoXmlParser::readConfigFile error reading file";
return;
}
m_reader.setDevice( file );
m_dbHandler->destroyDatabase();
m_dbHandler->createDatabase();
m_dbHandler->begin(); //start transaction (MAJOR speedup!!)
while( !m_reader.atEnd() )
{
m_reader.readNext();
if( m_reader.isStartElement() )
{
QStringRef localname = m_reader.name();
if( localname == "artist" )
{
readArtist();
}
}
}
m_dbHandler->commit(); //complete transaction
//as genres are just user tags, remove any that are not applied to at least 10 albums to weed out the worst crap
//perhaps make this a config option
m_dbHandler->trimGenres( 10 );
file->close();
delete file;
QFile::remove( filename );
}
voidpf ZCALLBACK qiodevice_open_file_func (
voidpf opaque,
voidpf file,
int mode)
{
QIODevice_descriptor *d = reinterpret_cast<QIODevice_descriptor*>(opaque);
QIODevice *iodevice = reinterpret_cast<QIODevice*>(file);
QIODevice::OpenMode desiredMode;
if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
desiredMode = QIODevice::ReadOnly;
else if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
desiredMode = QIODevice::ReadWrite;
else if (mode & ZLIB_FILEFUNC_MODE_CREATE)
desiredMode = QIODevice::WriteOnly;
if (iodevice->isOpen()) {
if ((iodevice->openMode() & desiredMode) == desiredMode) {
if (desiredMode != QIODevice::WriteOnly
&& iodevice->isSequential()) {
// We can use sequential devices only for writing.
delete d;
return NULL;
} else {
if ((desiredMode & QIODevice::WriteOnly) != 0) {
// open for writing, need to seek existing device
if (!iodevice->isSequential()) {
iodevice->seek(0);
} else {
d->pos = iodevice->pos();
}
}
}
return iodevice;
} else {
delete d;
return NULL;
}
}
iodevice->open(desiredMode);
if (iodevice->isOpen()) {
if (desiredMode != QIODevice::WriteOnly && iodevice->isSequential()) {
// We can use sequential devices only for writing.
iodevice->close();
delete d;
return NULL;
} else {
return iodevice;
}
} else {
delete d;
return NULL;
}
}
/*!
Read the unformatted contents of the file associated with a QContent into \a data.
If \a data is not empty the contents will be overridden.
Returns true if data could be read from the file and false otherwise.
*/
bool QContent::load(QByteArray &data) const
{
QIODevice *dev = open();
if (!dev)
return false;
if (dev->size() > 0)
data = dev->readAll();
dev->close();
delete dev;
return true;
}
void QMQTT::SslNetwork::onSocketReadReady()
{
QIODevice *ioDevice = _socket->ioDevice();
while(!ioDevice->atEnd())
{
if(_bytesRemaining == 0)
{
if (!ioDevice->getChar(reinterpret_cast<char *>(&_header)))
{
// malformed packet
emit error(QAbstractSocket::OperationError);
ioDevice->close();
return;
}
_bytesRemaining = readRemainingLength();
if (_bytesRemaining < 0)
{
// malformed remaining length
emit error(QAbstractSocket::OperationError);
ioDevice->close();
return;
}
}
QByteArray data = ioDevice->read(_bytesRemaining);
_buffer.append(data);
_bytesRemaining -= data.size();
if(_bytesRemaining == 0)
{
Frame frame(_header, _buffer);
_buffer.clear();
emit received(frame);
}
}
}
bool Chunks::write(QIODevice &iODevice, qint64 pos, qint64 count)
{
if (count == -1)
count = _size;
bool ok = iODevice.open(QIODevice::WriteOnly);
if (ok)
{
for (qint64 idx=pos; idx < count; idx += BUFFER_SIZE)
{
QByteArray ba = data(idx, BUFFER_SIZE);
iODevice.write(ba);
}
iODevice.close();
}
return ok;
}
bool saveToCache( const QString &contents, const QString &filename )
{
QIODevice *fd = ::getBZip2device(filename);
if ( !fd )
return false;
if (!fd->open(QIODevice::WriteOnly))
{
delete fd;
return false;
}
fd->write( contents.toUtf8() );
fd->close();
delete fd;
return true;
}
int ZCALLBACK qiodevice_close_file_func (
voidpf /*opaque UNUSED*/,
voidpf stream)
{
QIODevice *device = reinterpret_cast<QIODevice*>(stream);
#ifdef QUAZIP_QSAVEFILE_BUG_WORKAROUND
// QSaveFile terribly breaks the is-a idiom:
// it IS a QIODevice, but it is NOT compatible with it: close() is private
QSaveFile *file = qobject_cast<QSaveFile*>(device);
if (file != NULL) {
// We have to call the ugly commit() instead:
return file->commit() ? 0 : -1;
}
#endif
device->close();
return 0;
}
void test_textstream(const QString &fileName)
{
QIODevice *dev = KFilterDev::deviceForFile(fileName);
if(!dev)
{
kdWarning() << "dev=0" << endl;
return;
}
if(!dev->open(IO_ReadOnly))
{
kdWarning() << "open failed " << endl;
return;
}
QTextStream ts(dev);
printf("%s\n", ts.read().latin1());
dev->close();
delete dev;
}
void test_getch(const QString &fileName)
{
QIODevice *dev = KFilterDev::deviceForFile(fileName);
if(!dev)
{
kdWarning() << "dev=0" << endl;
return;
}
if(!dev->open(IO_ReadOnly))
{
kdWarning() << "open failed " << endl;
return;
}
int ch;
while((ch = dev->getch()) != -1)
printf("%c", ch);
dev->close();
delete dev;
}
/*!
Saves \a data to the file associated with a QContent.
If the QContent is associated with an existing file its contents will be overwritten,
otherwise a new file will be created. In order to create a new file the QContent must
have valid values of name() and type().
Returns true if all the data is written to the file and false otherwise.
\bold {Saving data to a new file:}
\code
bool saveData( const QString &name, const QString &type, const QByteArray &data )
{
QContent content;
content.setName( name );
content.setType( type );
if( content.save( data ) )
{
content.commit();
return true;
}
else
{
return false;
}
}
\endcode
*/
bool QContent::save(const QByteArray &data)
{
Q_ASSERT( d.constData() != NULL );
if( d.constData() == NULL )
return false;
QIODevice *dev = open(QIODevice::WriteOnly);
if (!dev)
return false;
int bytesWritten = dev->write(data);
dev->close();
delete dev;
if (bytesWritten != data.size()) {
return false;
}
return true;
}
void QWebdav::replyFinished(QNetworkReply* reply)
{
#ifdef DEBUG_WEBDAV
qDebug() << "QWebdav::replyFinished()";
#endif
disconnect(reply, SIGNAL(readyRead()), this, SLOT(replyReadyRead()));
disconnect(reply, SIGNAL(error(QNetworkReply::NetworkError)), this, SLOT(replyError(QNetworkReply::NetworkError)));
QIODevice* dataIO = m_inDataDevices.value(reply, 0);
if (dataIO != 0) {
dataIO->write(reply->readAll());
static_cast<QFile*>(dataIO)->flush();
dataIO->close();
delete dataIO;
}
m_inDataDevices.remove(reply);
QMetaObject::invokeMethod(this,"replyDeleteLater", Qt::QueuedConnection, Q_ARG(QNetworkReply*, reply));
}
/*!
Reads the contents of the text document \a content into \a document.
Returns true if the read was successful and false otherwise.
*/
bool NotesDemo::readContent( QTextDocument *document, QContent *content )
{
// Attempt to open the content in read-only mode. If the open succeeds QContent
// will construct a new I/O device and return a pointer to it, the caller takes
// ownership of the I/O device and is responsible for deleting it.
QIODevice *ioDevice = content->open( QIODevice::ReadOnly );
if ( !ioDevice ) {
qWarning() << "Could not open the new content object to read from!!";
return false;
}
QByteArray bytes = ioDevice->readAll();
// Convert the string from an 8-bit ASCII byte array and set it as the plain text
// content of the document.
document->setPlainText( QString::fromAscii( bytes ) );
// Close the I/O device and destroy it.
ioDevice->close();
delete ioDevice;
return true;
}
void GameState::Deserialize(QIODevice& f) {
f.open(QIODevice::ReadOnly);
QXmlStreamReader stream(&f);
while (!stream.atEnd()) {
stream.readNext();
if (stream.isStartElement()) {
if (stream.name() == "Board") {
this->height = stream.attributes().value("Height").toInt();
this->width = stream.attributes().value("Width").toInt();
this->stepNum = stream.attributes().value("StepsPerformed").toInt();
QStringList tmp = stream.readElementText().simplified().split(" ");
board = std::move(vector<vector<short>>(height, vector<short>(width, 0)));
for (uint i = 0; i < height; i++)
for (uint j = 0; j < width; j++)
this->board[i][j] = QString(tmp[i*height+j]).toShort();
}
}
}
f.close();
}
void test_block_write(const QString &fileName)
{
QIODevice *dev = KFilterDev::deviceForFile(fileName);
if(!dev)
{
kdWarning() << "dev=0" << endl;
return;
}
if(!dev->open(IO_WriteOnly))
{
kdWarning() << "open failed " << endl;
return;
}
QCString s("hello\n");
int ret = dev->writeBlock(s, s.size() - 1);
kdDebug() << "writeBlock ret=" << ret << endl;
// ret = dev->writeBlock( s, s.size()-1 );
// kdDebug() << "writeBlock ret=" << ret << endl;
dev->close();
delete dev;
}
voidpf ZCALLBACK qiodevice_open_file_func (
voidpf /*opaque UNUSED*/,
voidpf file,
int mode)
{
QIODevice *iodevice = reinterpret_cast<QIODevice*>(file);
QIODevice::OpenMode desiredMode;
if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
desiredMode = QIODevice::ReadOnly;
else if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
desiredMode = QIODevice::ReadWrite;
else if (mode & ZLIB_FILEFUNC_MODE_CREATE)
desiredMode = QIODevice::WriteOnly;
if (iodevice->isOpen()) {
if ((iodevice->openMode() & desiredMode) == desiredMode) {
if (iodevice->isSequential()) {
return NULL;
} else {
if ((desiredMode & QIODevice::WriteOnly) != 0) {
// open for writing, need to seek existing device
iodevice->seek(0);
}
}
return iodevice;
} else {
return NULL;
}
}
iodevice->open(desiredMode);
if (iodevice->isOpen()) {
if (iodevice->isSequential()) {
iodevice->close();
return NULL;
} else {
return iodevice;
}
} else
return NULL;
}
QImage ExifContentPlugin::thumbnail( const QContent &content, const QSize &size, Qt::AspectRatioMode mode )
{
QImage image;
QIODevice *device = content.open();
if (device) {
QExifImageHeader exif;
if (exif.loadFromJpeg(device)) {
image = exif.thumbnail();
if (!image.isNull() && size.isValid())
image = image.scaled(size, mode, Qt::SmoothTransformation);
}
device->close();
delete device;
}
return image;
}