std::unique_ptr<QgsMultiLineString> QgsGeometryFactory::fromMultiPolylineXY( const QgsMultiPolylineXY &multiline )
{
std::unique_ptr< QgsMultiLineString > mLine = qgis::make_unique< QgsMultiLineString >();
for ( int i = 0; i < multiline.size(); ++i )
{
mLine->addGeometry( fromPolylineXY( multiline.at( i ) ).release() );
}
return mLine;
}
ErrorList topolTest::checkPseudos( QgsVectorLayer *layer1, QgsVectorLayer *layer2, bool isExtent )
{
Q_UNUSED( layer2 );
int i = 0;
ErrorList errorList;
QgsFeature f;
if ( layer1->geometryType() != QgsWkbTypes::LineGeometry )
{
return errorList;
}
QList<FeatureLayer>::iterator it;
qDebug() << mFeatureList1.count();
QgsPointXY startPoint;
QgsPointXY endPoint;
std::multimap<QgsPointXY, QgsFeatureId, PointComparer> endVerticesMap;
for ( it = mFeatureList1.begin(); it != mFeatureList1.end(); ++it )
{
if ( !( ++i % 100 ) )
emit progress( i );
if ( testCanceled() )
break;
QgsGeometry g1 = it->feature.geometry();
if ( g1.isNull() )
{
QgsMessageLog::logMessage( tr( "Skipping invalid first geometry in pseudo line test." ), tr( "Topology plugin" ) );
continue;
}
if ( !_canExportToGeos( g1 ) )
{
QgsMessageLog::logMessage( tr( "Failed to import first geometry into GEOS in pseudo line test." ), tr( "Topology plugin" ) );
continue;
}
if ( g1.isMultipart() )
{
QgsMultiPolylineXY lines = g1.asMultiPolyline();
for ( int m = 0; m < lines.count(); m++ )
{
QgsPolylineXY line = lines[m];
startPoint = line[0];
endPoint = line[line.size() - 1];
endVerticesMap.insert( std::pair<QgsPointXY, QgsFeatureId>( startPoint, it->feature.id() ) );
endVerticesMap.insert( std::pair<QgsPointXY, QgsFeatureId>( endPoint, it->feature.id() ) );
}
}
else
{
QgsPolylineXY polyline = g1.asPolyline();
startPoint = polyline[0];
endPoint = polyline[polyline.size() - 1];
endVerticesMap.insert( std::pair<QgsPointXY, QgsFeatureId>( startPoint, it->feature.id() ) );
endVerticesMap.insert( std::pair<QgsPointXY, QgsFeatureId>( endPoint, it->feature.id() ) );
}
}
QgsGeometry canvasExtentPoly = QgsGeometry::fromWkt( qgsInterface->mapCanvas()->extent().asWktPolygon() );
for ( std::multimap<QgsPointXY, QgsFeatureId, PointComparer>::iterator pointIt = endVerticesMap.begin(), end = endVerticesMap.end(); pointIt != end; pointIt = endVerticesMap.upper_bound( pointIt->first ) )
{
QgsPointXY p = pointIt->first;
QgsFeatureId k = pointIt->second;
size_t repetitions = endVerticesMap.count( p );
if ( repetitions == 2 )
{
QgsGeometry conflictGeom = QgsGeometry::fromPointXY( p );
if ( isExtent )
{
if ( canvasExtentPoly.disjoint( conflictGeom ) )
{
continue;
}
}
QgsRectangle bBox = conflictGeom.boundingBox();
QgsFeature feat;
FeatureLayer ftrLayer1;
//need to fetch attributes?? being safe side by fetching..
layer1->getFeatures( QgsFeatureRequest().setFilterFid( k ) ).nextFeature( feat );
ftrLayer1.feature = feat;
ftrLayer1.layer = layer1;
QList<FeatureLayer> errorFtrLayers;
errorFtrLayers << ftrLayer1 << ftrLayer1;
TopolErrorPseudos *err = new TopolErrorPseudos( bBox, conflictGeom, errorFtrLayers );
errorList << err;
}
}
return errorList;
}
QgsGeometry QgsMapToolDeletePart::partUnderPoint( QPoint point, QgsFeatureId &fid, int &partNum )
{
QgsFeature f;
QgsGeometry geomPart;
switch ( vlayer->geometryType() )
{
case QgsWkbTypes::PointGeometry:
case QgsWkbTypes::LineGeometry:
{
QgsPointLocator::Match match = mCanvas->snappingUtils()->snapToCurrentLayer( point, QgsPointLocator::Types( QgsPointLocator::Vertex | QgsPointLocator::Edge ) );
if ( !match.isValid() )
return geomPart;
int snapVertex = match.vertexIndex();
vlayer->getFeatures( QgsFeatureRequest().setFilterFid( match.featureId() ) ).nextFeature( f );
QgsGeometry g = f.geometry();
if ( !g.isMultipart() )
{
fid = match.featureId();
return QgsGeometry::fromPointXY( match.point() );
}
else if ( QgsWkbTypes::geometryType( g.wkbType() ) == QgsWkbTypes::PointGeometry )
{
fid = match.featureId();
partNum = snapVertex;
return QgsGeometry::fromPointXY( match.point() );
}
else if ( QgsWkbTypes::geometryType( g.wkbType() ) == QgsWkbTypes::LineGeometry )
{
QgsMultiPolylineXY mline = g.asMultiPolyline();
for ( int part = 0; part < mline.count(); part++ )
{
if ( snapVertex < mline[part].count() )
{
fid = match.featureId();
partNum = part;
return QgsGeometry::fromPolylineXY( mline[part] );
}
snapVertex -= mline[part].count();
}
}
break;
}
case QgsWkbTypes::PolygonGeometry:
{
QgsPointLocator::Match match = mCanvas->snappingUtils()->snapToCurrentLayer( point, QgsPointLocator::Area );
if ( !match.isValid() )
return geomPart;
vlayer->getFeatures( QgsFeatureRequest().setFilterFid( match.featureId() ) ).nextFeature( f );
QgsGeometry g = f.geometry();
if ( g.isNull() )
return geomPart;
QgsPointXY layerCoords = toLayerCoordinates( vlayer, point );
if ( !g.isMultipart() )
{
fid = f.id();
return geomPart;
}
QgsMultiPolygonXY mpolygon = g.asMultiPolygon();
for ( int part = 0; part < mpolygon.count(); part++ ) // go through the polygons
{
const QgsPolygonXY &polygon = mpolygon[part];
QgsGeometry partGeo = QgsGeometry::fromPolygonXY( polygon );
if ( partGeo.contains( &layerCoords ) )
{
fid = f.id();
partNum = part;
return partGeo;
}
}
break;
}
default:
{
break;
}
}
return geomPart;
}
void QgsMapToolOffsetCurve::prepareGeometry( const QgsPointLocator::Match &match, QgsFeature &snappedFeature )
{
QgsVectorLayer *vl = match.layer();
if ( !vl )
{
return;
}
mOriginalGeometry = QgsGeometry();
mManipulatedGeometry = QgsGeometry();
mModifiedPart = -1;
mModifiedRing = -1;
//assign feature part by vertex number (snap to vertex) or by before vertex number (snap to segment)
QgsGeometry geom = snappedFeature.geometry();
if ( geom.isNull() )
{
return;
}
mOriginalGeometry = geom;
QgsWkbTypes::Type geomType = geom.wkbType();
if ( QgsWkbTypes::geometryType( geomType ) == QgsWkbTypes::LineGeometry )
{
if ( !match.hasEdge() )
{
return;
}
if ( !geom.isMultipart() )
{
mManipulatedGeometry = geom;
}
else
{
int vertex = match.vertexIndex();
QgsVertexId vertexId;
geom.vertexIdFromVertexNr( vertex, vertexId );
mModifiedPart = vertexId.part;
QgsMultiPolylineXY multiLine = geom.asMultiPolyline();
mManipulatedGeometry = QgsGeometry::fromPolylineXY( multiLine.at( mModifiedPart ) );
}
}
else if ( QgsWkbTypes::geometryType( geomType ) == QgsWkbTypes::PolygonGeometry )
{
if ( !match.hasEdge() && match.hasArea() )
{
if ( !geom.isMultipart() )
{
mManipulatedGeometry = geom;
}
else
{
// get the correct part
QgsMultiPolygonXY mpolygon = geom.asMultiPolygon();
for ( int part = 0; part < mpolygon.count(); part++ ) // go through the polygons
{
const QgsPolygonXY &polygon = mpolygon[part];
QgsGeometry partGeo = QgsGeometry::fromPolygonXY( polygon );
const QgsPointXY layerCoords = match.point();
if ( partGeo.contains( &layerCoords ) )
{
mModifiedPart = part;
mManipulatedGeometry = partGeo;
}
}
}
}
else if ( match.hasEdge() )
{
int vertex = match.vertexIndex();
QgsVertexId vertexId;
geom.vertexIdFromVertexNr( vertex, vertexId );
QgsDebugMsg( QStringLiteral( "%1" ).arg( vertexId.ring ) );
if ( !geom.isMultipart() )
{
QgsPolygonXY poly = geom.asPolygon();
// if has rings
if ( poly.count() > 0 )
{
mModifiedRing = vertexId.ring;
mManipulatedGeometry = QgsGeometry::fromPolygonXY( QgsPolygonXY() << poly.at( mModifiedRing ) );
}
else
{
mManipulatedGeometry = QgsGeometry::fromPolygonXY( poly );
}
}
else
{
mModifiedPart = vertexId.part;
// get part, get ring
QgsMultiPolygonXY multiPoly = geom.asMultiPolygon();
// if has rings
if ( multiPoly.at( mModifiedPart ).count() > 0 )
{
mModifiedRing = vertexId.ring;
mManipulatedGeometry = QgsGeometry::fromPolygonXY( QgsPolygonXY() << multiPoly.at( mModifiedPart ).at( mModifiedRing ) );
}
else
{
mManipulatedGeometry = QgsGeometry::fromPolygonXY( multiPoly.at( mModifiedPart ) );
}
}
}
}
}
void QgsMapToolOffsetCurve::applyOffset( double offset, Qt::KeyboardModifiers modifiers )
{
if ( !mLayer || offset == 0.0 )
{
cancel();
notifyNotVectorLayer();
return;
}
updateGeometryAndRubberBand( offset );
// no modification
if ( !mGeometryModified )
{
mLayer->destroyEditCommand();
cancel();
return;
}
if ( mModifiedPart >= 0 )
{
QgsGeometry geometry;
int partIndex = 0;
QgsWkbTypes::Type geomType = mOriginalGeometry.wkbType();
if ( QgsWkbTypes::geometryType( geomType ) == QgsWkbTypes::LineGeometry )
{
QgsMultiPolylineXY newMultiLine;
QgsMultiPolylineXY multiLine = mOriginalGeometry.asMultiPolyline();
QgsMultiPolylineXY::const_iterator it = multiLine.constBegin();
for ( ; it != multiLine.constEnd(); ++it )
{
if ( partIndex == mModifiedPart )
{
newMultiLine.append( mModifiedGeometry.asPolyline() );
}
else
{
newMultiLine.append( *it );
}
partIndex++;
}
geometry = QgsGeometry::fromMultiPolylineXY( newMultiLine );
}
else
{
QgsMultiPolygonXY newMultiPoly;
const QgsMultiPolygonXY multiPoly = mOriginalGeometry.asMultiPolygon();
QgsMultiPolygonXY::const_iterator multiPolyIt = multiPoly.constBegin();
for ( ; multiPolyIt != multiPoly.constEnd(); ++multiPolyIt )
{
if ( partIndex == mModifiedPart )
{
if ( mModifiedGeometry.isMultipart() )
{
// not a ring
if ( mModifiedRing <= 0 )
{
// part became mulitpolygon, that means discard original rings from the part
newMultiPoly += mModifiedGeometry.asMultiPolygon();
}
else
{
// ring became multipolygon, oh boy!
QgsPolygonXY newPoly;
int ringIndex = 0;
QgsPolygonXY::const_iterator polyIt = multiPolyIt->constBegin();
for ( ; polyIt != multiPolyIt->constEnd(); ++polyIt )
{
if ( ringIndex == mModifiedRing )
{
const QgsMultiPolygonXY ringParts = mModifiedGeometry.asMultiPolygon();
QgsPolygonXY newRings;
QgsMultiPolygonXY::const_iterator ringIt = ringParts.constBegin();
for ( ; ringIt != ringParts.constEnd(); ++ringIt )
{
// the different parts of the new rings cannot have rings themselves
newRings.append( ringIt->at( 0 ) );
}
newPoly += newRings;
}
else
{
newPoly.append( *polyIt );
}
ringIndex++;
}
newMultiPoly.append( newPoly );
}
}
else
{
// original part had no ring
if ( mModifiedRing == -1 )
{
newMultiPoly.append( mModifiedGeometry.asPolygon() );
}
else
{
QgsPolygonXY newPoly;
int ringIndex = 0;
QgsPolygonXY::const_iterator polyIt = multiPolyIt->constBegin();
for ( ; polyIt != multiPolyIt->constEnd(); ++polyIt )
{
if ( ringIndex == mModifiedRing )
{
newPoly.append( mModifiedGeometry.asPolygon().at( 0 ) );
}
else
{
newPoly.append( *polyIt );
}
ringIndex++;
}
newMultiPoly.append( newPoly );
}
}
}
else
{
newMultiPoly.append( *multiPolyIt );
}
partIndex++;
}
geometry = QgsGeometry::fromMultiPolygonXY( newMultiPoly );
}
geometry.convertToMultiType();
mModifiedGeometry = geometry;
}
else if ( mModifiedRing >= 0 )
{
// original geometry had some rings
if ( mModifiedGeometry.isMultipart() )
{
// not a ring
if ( mModifiedRing == 0 )
{
// polygon became mulitpolygon, that means discard original rings from the part
// keep the modified geometry as is
}
else
{
QgsPolygonXY newPoly;
const QgsPolygonXY poly = mOriginalGeometry.asPolygon();
// ring became multipolygon, oh boy!
int ringIndex = 0;
QgsPolygonXY::const_iterator polyIt = poly.constBegin();
for ( ; polyIt != poly.constEnd(); ++polyIt )
{
if ( ringIndex == mModifiedRing )
{
QgsMultiPolygonXY ringParts = mModifiedGeometry.asMultiPolygon();
QgsPolygonXY newRings;
QgsMultiPolygonXY::const_iterator ringIt = ringParts.constBegin();
for ( ; ringIt != ringParts.constEnd(); ++ringIt )
{
// the different parts of the new rings cannot have rings themselves
newRings.append( ringIt->at( 0 ) );
}
newPoly += newRings;
}
else
{
newPoly.append( *polyIt );
}
ringIndex++;
}
mModifiedGeometry = QgsGeometry::fromPolygonXY( newPoly );
}
}
else
{
// simple case where modified geom is a polygon (not multi)
QgsPolygonXY newPoly;
const QgsPolygonXY poly = mOriginalGeometry.asPolygon();
int ringIndex = 0;
QgsPolygonXY::const_iterator polyIt = poly.constBegin();
for ( ; polyIt != poly.constEnd(); ++polyIt )
{
if ( ringIndex == mModifiedRing )
{
newPoly.append( mModifiedGeometry.asPolygon().at( 0 ) );
}
else
{
newPoly.append( *polyIt );
}
ringIndex++;
}
mModifiedGeometry = QgsGeometry::fromPolygonXY( newPoly );
}
}
if ( !mModifiedGeometry.isGeosValid() )
{
emit messageEmitted( tr( "Generated geometry is not valid." ), Qgis::Critical );
// no cancel, continue editing.
return;
}
mLayer->beginEditCommand( tr( "Offset curve" ) );
bool editOk;
if ( !mCtrlHeldOnFirstClick && !( modifiers & Qt::ControlModifier ) )
{
editOk = mLayer->changeGeometry( mModifiedFeature, mModifiedGeometry );
}
else
{
QgsFeature f;
f.setGeometry( mModifiedGeometry );
//add empty values for all fields (allows inserting attribute values via the feature form in the same session)
QgsAttributes attrs( mLayer->fields().count() );
const QgsFields &fields = mLayer->fields();
for ( int idx = 0; idx < fields.count(); ++idx )
{
attrs[idx] = QVariant();
}
f.setAttributes( attrs );
editOk = mLayer->addFeature( f );
}
if ( editOk )
{
mLayer->endEditCommand();
}
else
{
mLayer->destroyEditCommand();
emit messageEmitted( QStringLiteral( "Could not apply offset" ), Qgis::Critical );
}
deleteRubberBandAndGeometry();
deleteUserInputWidget();
mLayer->triggerRepaint();
mLayer = nullptr;
}
int QgsVectorLayerEditUtils::addTopologicalPoints( const QgsGeometry &geom )
{
if ( !mLayer->isSpatial() )
return 1;
if ( geom.isNull() )
{
return 1;
}
int returnVal = 0;
QgsWkbTypes::Type wkbType = geom.wkbType();
switch ( QgsWkbTypes::geometryType( wkbType ) )
{
//line
case QgsWkbTypes::LineGeometry:
{
if ( !QgsWkbTypes::isMultiType( wkbType ) )
{
QgsPolylineXY line = geom.asPolyline();
QgsPolylineXY::const_iterator line_it = line.constBegin();
for ( ; line_it != line.constEnd(); ++line_it )
{
if ( addTopologicalPoints( *line_it ) != 0 )
{
returnVal = 2;
}
}
}
else
{
QgsMultiPolylineXY multiLine = geom.asMultiPolyline();
QgsPolylineXY currentPolyline;
for ( int i = 0; i < multiLine.size(); ++i )
{
QgsPolylineXY::const_iterator line_it = currentPolyline.constBegin();
for ( ; line_it != currentPolyline.constEnd(); ++line_it )
{
if ( addTopologicalPoints( *line_it ) != 0 )
{
returnVal = 2;
}
}
}
}
break;
}
case QgsWkbTypes::PolygonGeometry:
{
if ( !QgsWkbTypes::isMultiType( wkbType ) )
{
QgsPolygonXY polygon = geom.asPolygon();
QgsPolylineXY currentRing;
for ( int i = 0; i < polygon.size(); ++i )
{
currentRing = polygon.at( i );
QgsPolylineXY::const_iterator line_it = currentRing.constBegin();
for ( ; line_it != currentRing.constEnd(); ++line_it )
{
if ( addTopologicalPoints( *line_it ) != 0 )
{
returnVal = 2;
}
}
}
}
else
{
QgsMultiPolygonXY multiPolygon = geom.asMultiPolygon();
QgsPolygonXY currentPolygon;
QgsPolylineXY currentRing;
for ( int i = 0; i < multiPolygon.size(); ++i )
{
currentPolygon = multiPolygon.at( i );
for ( int j = 0; j < currentPolygon.size(); ++j )
{
currentRing = currentPolygon.at( j );
QgsPolylineXY::const_iterator line_it = currentRing.constBegin();
for ( ; line_it != currentRing.constEnd(); ++line_it )
{
if ( addTopologicalPoints( *line_it ) != 0 )
{
returnVal = 2;
}
}
}
}
}
break;
}
case QgsWkbTypes::PointGeometry:
case QgsWkbTypes::UnknownGeometry:
case QgsWkbTypes::NullGeometry:
break;
}
return returnVal;
}
ErrorList topolTest::checkSegmentLength( double tolerance, QgsVectorLayer *layer1, QgsVectorLayer *layer2, bool isExtent )
{
Q_UNUSED( layer1 );
Q_UNUSED( layer2 );
Q_UNUSED( isExtent );
int i = 0;
ErrorList errorList;
QgsFeature f;
QList<FeatureLayer>::iterator it;
QgsPolygonXY pol;
QgsMultiPolygonXY mpol;
QgsPolylineXY segm;
QgsPolylineXY ls;
QgsMultiPolylineXY mls;
QList<FeatureLayer> fls;
TopolErrorShort *err = nullptr;
double distance;
for ( it = mFeatureList1.begin(); it != mFeatureList1.end(); ++it )
{
if ( !( ++i % 100 ) )
{
emit progress( i );
}
if ( testCanceled() )
{
break;
}
QgsGeometry g1 = it->feature.geometry();
// switching by type here, because layer can contain both single and multi version geometries
switch ( g1.wkbType() )
{
case QgsWkbTypes::LineString:
case QgsWkbTypes::LineString25D:
ls = g1.asPolyline();
for ( int i = 1; i < ls.size(); ++i )
{
distance = std::sqrt( ls[i - 1].sqrDist( ls[i] ) );
if ( distance < tolerance )
{
fls.clear();
fls << *it << *it;
segm.clear();
segm << ls[i - 1] << ls[i];
QgsGeometry conflict = QgsGeometry::fromPolylineXY( segm );
err = new TopolErrorShort( g1.boundingBox(), conflict, fls );
//err = new TopolErrorShort(g1->boundingBox(), QgsGeometry::fromPolyline(segm), fls);
errorList << err;
//break on getting the first error
break;
}
}
break;
case QgsWkbTypes::Polygon:
case QgsWkbTypes::Polygon25D:
pol = g1.asPolygon();
for ( int i = 0; i < pol.size(); ++i )
{
for ( int j = 1; j < pol[i].size(); ++j )
{
distance = std::sqrt( pol[i][j - 1].sqrDist( pol[i][j] ) );
if ( distance < tolerance )
{
fls.clear();
fls << *it << *it;
segm.clear();
segm << pol[i][j - 1] << pol[i][j];
QgsGeometry conflict = QgsGeometry::fromPolylineXY( segm );
err = new TopolErrorShort( g1.boundingBox(), conflict, fls );
errorList << err;
//break on getting the first error
break;
}
}
}
break;
case QgsWkbTypes::MultiLineString:
case QgsWkbTypes::MultiLineString25D:
mls = g1.asMultiPolyline();
for ( int k = 0; k < mls.size(); ++k )
{
QgsPolylineXY &ls = mls[k];
for ( int i = 1; i < ls.size(); ++i )
{
distance = std::sqrt( ls[i - 1].sqrDist( ls[i] ) );
if ( distance < tolerance )
{
fls.clear();
fls << *it << *it;
segm.clear();
segm << ls[i - 1] << ls[i];
QgsGeometry conflict = QgsGeometry::fromPolylineXY( segm );
err = new TopolErrorShort( g1.boundingBox(), conflict, fls );
errorList << err;
//break on getting the first error
break;
}
}
}
break;
case QgsWkbTypes::MultiPolygon:
case QgsWkbTypes::MultiPolygon25D:
mpol = g1.asMultiPolygon();
for ( int k = 0; k < mpol.size(); ++k )
{
QgsPolygonXY &pol = mpol[k];
for ( int i = 0; i < pol.size(); ++i )
{
for ( int j = 1; j < pol[i].size(); ++j )
{
distance = pol[i][j - 1].sqrDist( pol[i][j] );
if ( distance < tolerance )
{
fls.clear();
fls << *it << *it;
segm.clear();
segm << pol[i][j - 1] << pol[i][j];
QgsGeometry conflict = QgsGeometry::fromPolylineXY( segm );
err = new TopolErrorShort( g1.boundingBox(), conflict, fls );
errorList << err;
//break on getting the first error
break;
}
}
}
}
break;
default:
continue;
}
}
return errorList;
}
void QgsGeometryValidator::run()
{
mErrorCount = 0;
switch ( mMethod )
{
case QgsGeometry::ValidatorGeos:
{
char *r = nullptr;
geos::unique_ptr g0( mGeometry.exportToGeos() );
GEOSContextHandle_t handle = QgsGeometry::getGEOSHandler();
if ( !g0 )
{
emit errorFound( QgsGeometry::Error( QObject::tr( "GEOS error: could not produce geometry for GEOS (check log window)" ) ) );
}
else
{
GEOSGeometry *g1 = nullptr;
char res = GEOSisValidDetail_r( handle, g0.get(), GEOSVALID_ALLOW_SELFTOUCHING_RING_FORMING_HOLE, &r, &g1 );
if ( res != 1 )
{
if ( g1 )
{
const GEOSCoordSequence *cs = GEOSGeom_getCoordSeq_r( handle, g1 );
unsigned int n;
if ( GEOSCoordSeq_getSize_r( handle, cs, &n ) && n == 1 )
{
double x, y;
GEOSCoordSeq_getX_r( handle, cs, 0, &x );
GEOSCoordSeq_getY_r( handle, cs, 0, &y );
emit errorFound( QgsGeometry::Error( QObject::tr( "GEOS error: %1" ).arg( r ), QgsPointXY( x, y ) ) );
mErrorCount++;
}
GEOSGeom_destroy_r( handle, g1 );
}
else
{
emit errorFound( QgsGeometry::Error( QObject::tr( "GEOS error: %1" ).arg( r ) ) );
mErrorCount++;
}
GEOSFree_r( handle, r );
}
}
break;
}
case QgsGeometry::ValidatorQgisInternal:
{
QgsWkbTypes::Type flatType = QgsWkbTypes::flatType( mGeometry.wkbType() );
//if ( flatType == QgsWkbTypes::Point || flatType == QgsWkbTypes::MultiPoint )
// break;
if ( flatType == QgsWkbTypes::LineString )
{
validatePolyline( 0, mGeometry.asPolyline() );
}
else if ( flatType == QgsWkbTypes::MultiLineString )
{
QgsMultiPolylineXY mp = mGeometry.asMultiPolyline();
for ( int i = 0; !mStop && i < mp.size(); i++ )
validatePolyline( i, mp[i] );
}
else if ( flatType == QgsWkbTypes::Polygon )
{
validatePolygon( 0, mGeometry.asPolygon() );
}
else if ( flatType == QgsWkbTypes::MultiPolygon )
{
QgsMultiPolygonXY mp = mGeometry.asMultiPolygon();
for ( int i = 0; !mStop && i < mp.size(); i++ )
{
validatePolygon( i, mp[i] );
}
for ( int i = 0; !mStop && i < mp.size(); i++ )
{
if ( mp[i].isEmpty() )
{
emit errorFound( QgsGeometry::Error( QObject::tr( "polygon %1 has no rings" ).arg( i ) ) );
mErrorCount++;
continue;
}
for ( int j = i + 1; !mStop && j < mp.size(); j++ )
{
if ( mp[j].isEmpty() )
continue;
if ( ringInRing( mp[i][0], mp[j][0] ) )
{
emit errorFound( QgsGeometry::Error( QObject::tr( "polygon %1 inside polygon %2" ).arg( i ).arg( j ) ) );
mErrorCount++;
}
else if ( ringInRing( mp[j][0], mp[i][0] ) )
{
emit errorFound( QgsGeometry::Error( QObject::tr( "polygon %1 inside polygon %2" ).arg( j ).arg( i ) ) );
mErrorCount++;
}
else
{
checkRingIntersections( i, 0, mp[i][0], j, 0, mp[j][0] );
}
}
}
}
else if ( flatType == QgsWkbTypes::Unknown )
{
QgsDebugMsg( QObject::tr( "Unknown geometry type" ) );
emit errorFound( QgsGeometry::Error( QObject::tr( "Unknown geometry type %1" ).arg( mGeometry.wkbType() ) ) );
mErrorCount++;
}
if ( mStop )
{
emit errorFound( QgsGeometry::Error( QObject::tr( "Geometry validation was aborted." ) ) );
}
else if ( mErrorCount > 0 )
{
emit errorFound( QgsGeometry::Error( QObject::tr( "Geometry has %1 errors." ).arg( mErrorCount ) ) );
}
#if 0
else
{
emit errorFound( QgsGeometry::Error( QObject::tr( "Geometry is valid." ) ) );
}
#endif
break;
}
}
}
QgsGeometry QgsMapToolDeletePart::partUnderPoint( QPoint point, QgsFeatureId &fid, int &partNum )
{
QgsFeature f;
QgsGeometry geomPart;
switch ( vlayer->geometryType() )
{
case QgsWkbTypes::PointGeometry:
case QgsWkbTypes::LineGeometry:
{
QgsPointLocator::Match match = mCanvas->snappingUtils()->snapToCurrentLayer( point, QgsPointLocator::Types( QgsPointLocator::Vertex | QgsPointLocator::Edge ) );
if ( !match.isValid() )
return geomPart;
int snapVertex = match.vertexIndex();
vlayer->getFeatures( QgsFeatureRequest().setFilterFid( match.featureId() ) ).nextFeature( f );
QgsGeometry g = f.geometry();
if ( !g.isMultipart() )
{
fid = match.featureId();
return QgsGeometry::fromPointXY( match.point() );
}
if ( g.wkbType() == QgsWkbTypes::MultiPoint || g.wkbType() == QgsWkbTypes::MultiPoint25D )
{
fid = match.featureId();
partNum = snapVertex;
return QgsGeometry::fromPointXY( match.point() );
}
if ( g.wkbType() == QgsWkbTypes::MultiLineString || g.wkbType() == QgsWkbTypes::MultiLineString25D )
{
QgsMultiPolylineXY mline = g.asMultiPolyline();
for ( int part = 0; part < mline.count(); part++ )
{
if ( snapVertex < mline[part].count() )
{
fid = match.featureId();
partNum = part;
return QgsGeometry::fromPolylineXY( mline[part] );
}
snapVertex -= mline[part].count();
}
}
break;
}
case QgsWkbTypes::PolygonGeometry:
{
QgsPointXY layerCoords = toLayerCoordinates( vlayer, point );
double searchRadius = QgsTolerance::vertexSearchRadius( mCanvas->currentLayer(), mCanvas->mapSettings() );
QgsRectangle selectRect( layerCoords.x() - searchRadius, layerCoords.y() - searchRadius,
layerCoords.x() + searchRadius, layerCoords.y() + searchRadius );
QgsFeatureIterator fit = vlayer->getFeatures( QgsFeatureRequest().setFilterRect( selectRect ) );
fit.nextFeature( f );
QgsGeometry g = f.geometry();
if ( g.isNull() )
return geomPart;
if ( !g.isMultipart() )
{
fid = f.id();
return geomPart;
}
QgsMultiPolygonXY mpolygon = g.asMultiPolygon();
for ( int part = 0; part < mpolygon.count(); part++ ) // go through the polygons
{
const QgsPolygonXY &polygon = mpolygon[part];
QgsGeometry partGeo = QgsGeometry::fromPolygonXY( polygon );
if ( partGeo.contains( &layerCoords ) )
{
fid = f.id();
partNum = part;
return partGeo;
}
}
break;
}
default:
{
break;
}
}
return geomPart;
}