int getRasterLayerStretchInfo(Layer* pLayer, uint32_t channel, struct RasterLayerStretchInfo* pInfo)
{
RasterLayer* pRaster = dynamic_cast<RasterLayer*>(pLayer);
RasterChannelType chan(static_cast<RasterChannelTypeEnum>(channel));
if (pRaster == NULL || pInfo == NULL || !chan.isValid())
{
setLastError(SIMPLE_BAD_PARAMS);
return 1;
}
DisplayMode mode(chan == GRAY ? GRAYSCALE_MODE : RGB_MODE);
pRaster->getStretchValues(chan, pInfo->lowerStretch, pInfo->upperStretch);
pInfo->stretchType = pRaster->getStretchType(mode);
pInfo->stretchUnits = pRaster->getStretchUnits(chan);
setLastError(SIMPLE_NO_ERROR);
return 0;
}
void ChippingWindow::createView()
{
if (mpChippingWidget == NULL)
{
return;
}
RasterElement* pRaster = getRasterElement();
if (pRaster == NULL)
{
return;
}
// Create the new raster element from the primary element of the source.
// Note that this does not chip displayed elements if they differ from the primary element.
// This causes a special case below where the stretch values are being applied to the chipped layer.
RasterElement* pRasterChip = pRaster->createChip(pRaster->getParent(), "_chip",
mpChippingWidget->getChipRows(), mpChippingWidget->getChipColumns(), mpChippingWidget->getChipBands());
if (pRasterChip == NULL)
{
QMessageBox::critical(this, windowTitle(), "Unable to create a new cube!");
return;
}
const RasterDataDescriptor* pDescriptor =
dynamic_cast<const RasterDataDescriptor*>(pRasterChip->getDataDescriptor());
VERIFYNRV(pDescriptor != NULL);
// Create a view for the new chip
SpatialDataWindow* pWindow = dynamic_cast<SpatialDataWindow*>(
Service<DesktopServices>()->createWindow(pRasterChip->getName(), SPATIAL_DATA_WINDOW));
if (pWindow == NULL)
{
return;
}
SpatialDataView* pView = pWindow->getSpatialDataView();
if (pView == NULL)
{
Service<DesktopServices>()->deleteWindow(pWindow);
return;
}
UndoLock lock(pView);
if (pView->setPrimaryRasterElement(pRasterChip) == false)
{
Service<DesktopServices>()->deleteWindow(pWindow);
return;
}
// RasterLayerImp is needed for the call to setCurrentStretchAsOriginalStretch().
RasterLayerImp* pLayer = dynamic_cast<RasterLayerImp*>(pView->createLayer(RASTER, pRasterChip));
if (pLayer == NULL)
{
Service<DesktopServices>()->deleteWindow(pWindow);
return;
}
string origName = pRaster->getName();
SpatialDataWindow* pOrigWindow = dynamic_cast<SpatialDataWindow*>(
Service<DesktopServices>()->getWindow(origName, SPATIAL_DATA_WINDOW));
if (pOrigWindow != NULL)
{
SpatialDataView* pOrigView = pOrigWindow->getSpatialDataView();
if (pOrigView != NULL)
{
LayerList* pLayerList = pOrigView->getLayerList();
if (pLayerList != NULL)
{
RasterLayer* pOrigLayer = static_cast<RasterLayer*>(pLayerList->getLayer(RASTER, pRaster));
if (pOrigLayer != NULL)
{
// Set the stretch type first so that stretch values are interpreted correctly.
pLayer->setStretchType(GRAYSCALE_MODE, pOrigLayer->getStretchType(GRAYSCALE_MODE));
pLayer->setStretchType(RGB_MODE, pOrigLayer->getStretchType(RGB_MODE));
pLayer->setDisplayMode(pOrigLayer->getDisplayMode());
// Set the properties of the cube layer in the new view.
// For each channel, display the first band if the previously displayed band was chipped.
vector<RasterChannelType> channels = StringUtilities::getAllEnumValues<RasterChannelType>();
for (vector<RasterChannelType>::const_iterator iter = channels.begin(); iter != channels.end(); ++iter)
{
bool bandCopied = true;
DimensionDescriptor newBand;
DimensionDescriptor oldBand = pOrigLayer->getDisplayedBand(*iter);
if (oldBand.isOriginalNumberValid() == true)
{
newBand = pDescriptor->getOriginalBand(oldBand.getOriginalNumber());
}
if (newBand.isValid() == false)
{
bandCopied = false;
newBand = pDescriptor->getBands().front();
}
// No need to explicitly set the RasterElement here since the new view only has one RasterElement.
pLayer->setDisplayedBand(*iter, newBand);
// Use the default stretch properties if the displayed band was removed from the view or
// if the non-primary raster element was displayed. Otherwise, copy the stretch properties.
if (bandCopied && pRaster == pOrigLayer->getDisplayedRasterElement(*iter))
{
// Set the stretch units first so that stretch values are interpreted correctly.
pLayer->setStretchUnits(*iter, pOrigLayer->getStretchUnits(*iter));
double lower;
double upper;
pOrigLayer->getStretchValues(*iter, lower, upper);
pLayer->setStretchValues(*iter, lower, upper);
}
}
pLayer->setCurrentStretchAsOriginalStretch();
pView->refresh();
}
}
}
}
// Create a GCP layer
if (pRaster->isGeoreferenced() == true)
{
const vector<DimensionDescriptor>& rows = mpChippingWidget->getChipRows();
const vector<DimensionDescriptor>& columns = mpChippingWidget->getChipColumns();
if ((rows.empty() == false) && (columns.empty() == false))
{
// Get the geocoordinates at the chip corners
VERIFYNRV(rows.front().isActiveNumberValid() == true);
VERIFYNRV(rows.back().isActiveNumberValid() == true);
VERIFYNRV(columns.front().isActiveNumberValid() == true);
VERIFYNRV(columns.back().isActiveNumberValid() == true);
unsigned int startRow = rows.front().getActiveNumber();
unsigned int endRow = rows.back().getActiveNumber();
unsigned int startCol = columns.front().getActiveNumber();
unsigned int endCol = columns.back().getActiveNumber();
GcpPoint ulPoint;
ulPoint.mPixel = LocationType(startCol, startRow);
ulPoint.mCoordinate = pRaster->convertPixelToGeocoord(ulPoint.mPixel);
GcpPoint urPoint;
urPoint.mPixel = LocationType(endCol, startRow);
urPoint.mCoordinate = pRaster->convertPixelToGeocoord(urPoint.mPixel);
GcpPoint llPoint;
llPoint.mPixel = LocationType(startCol, endRow);
llPoint.mCoordinate = pRaster->convertPixelToGeocoord(llPoint.mPixel);
GcpPoint lrPoint;
lrPoint.mPixel = LocationType(endCol, endRow);
lrPoint.mCoordinate = pRaster->convertPixelToGeocoord(lrPoint.mPixel);
GcpPoint centerPoint;
centerPoint.mPixel = LocationType((startCol + endCol) / 2, (startRow + endRow) / 2);
centerPoint.mCoordinate = pRaster->convertPixelToGeocoord(centerPoint.mPixel);
// Reset the coordinates to be in active numbers relative to the chip
const vector<DimensionDescriptor>& chipRows = pDescriptor->getRows();
const vector<DimensionDescriptor>& chipColumns = pDescriptor->getColumns();
VERIFYNRV(chipRows.front().isActiveNumberValid() == true);
VERIFYNRV(chipRows.back().isActiveNumberValid() == true);
VERIFYNRV(chipColumns.front().isActiveNumberValid() == true);
VERIFYNRV(chipColumns.back().isActiveNumberValid() == true);
unsigned int chipStartRow = chipRows.front().getActiveNumber();
unsigned int chipEndRow = chipRows.back().getActiveNumber();
unsigned int chipStartCol = chipColumns.front().getActiveNumber();
unsigned int chipEndCol = chipColumns.back().getActiveNumber();
ulPoint.mPixel = LocationType(chipStartCol, chipStartRow);
urPoint.mPixel = LocationType(chipEndCol, chipStartRow);
llPoint.mPixel = LocationType(chipStartCol, chipEndRow);
lrPoint.mPixel = LocationType(chipEndCol, chipEndRow);
centerPoint.mPixel = LocationType((chipStartCol + chipEndCol) / 2, (chipStartRow + chipEndRow) / 2);
// Create the GCP list
Service<ModelServices> pModel;
GcpList* pGcpList = static_cast<GcpList*>(pModel->createElement("Corner Coordinates",
TypeConverter::toString<GcpList>(), pRasterChip));
if (pGcpList != NULL)
{
list<GcpPoint> gcps;
gcps.push_back(ulPoint);
gcps.push_back(urPoint);
gcps.push_back(llPoint);
gcps.push_back(lrPoint);
gcps.push_back(centerPoint);
pGcpList->addPoints(gcps);
// Create the layer
if (pView->createLayer(GCP_LAYER, pGcpList) == NULL)
{
QMessageBox::warning(this, windowTitle(), "Could not create a GCP layer.");
}
}
else
{
QMessageBox::warning(this, windowTitle(), "Could not create a GCP list.");
}
}
}
}
