Esempio n. 1
0
void RenderView::setSelection(RenderObject* start, int startPos, RenderObject* end, int endPos, SelectionRepaintMode blockRepaintMode)
{
    // Make sure both our start and end objects are defined.
    // Check www.msnbc.com and try clicking around to find the case where this happened.
    if ((start && !end) || (end && !start))
        return;

    // Just return if the selection hasn't changed.
    if (m_selectionStart == start && m_selectionStartPos == startPos &&
        m_selectionEnd == end && m_selectionEndPos == endPos)
        return;

    // Record the old selected objects.  These will be used later
    // when we compare against the new selected objects.
    int oldStartPos = m_selectionStartPos;
    int oldEndPos = m_selectionEndPos;

    // Objects each have a single selection rect to examine.
    typedef HashMap<RenderObject*, OwnPtr<RenderSelectionInfo> > SelectedObjectMap;
    SelectedObjectMap oldSelectedObjects;
    SelectedObjectMap newSelectedObjects;

    // Blocks contain selected objects and fill gaps between them, either on the left, right, or in between lines and blocks.
    // In order to get the repaint rect right, we have to examine left, middle, and right rects individually, since otherwise
    // the union of those rects might remain the same even when changes have occurred.
    typedef HashMap<RenderBlock*, OwnPtr<RenderBlockSelectionInfo> > SelectedBlockMap;
    SelectedBlockMap oldSelectedBlocks;
    SelectedBlockMap newSelectedBlocks;

    RenderObject* os = m_selectionStart;
    RenderObject* stop = rendererAfterPosition(m_selectionEnd, m_selectionEndPos);
    while (os && os != stop) {
        if ((os->canBeSelectionLeaf() || os == m_selectionStart || os == m_selectionEnd) && os->selectionState() != SelectionNone) {
            // Blocks are responsible for painting line gaps and margin gaps.  They must be examined as well.
            oldSelectedObjects.set(os, adoptPtr(new RenderSelectionInfo(os, true)));
            if (blockRepaintMode == RepaintNewXOROld) {
                RenderBlock* cb = os->containingBlock();
                while (cb && !cb->isRenderView()) {
                    OwnPtr<RenderBlockSelectionInfo>& blockInfo = oldSelectedBlocks.add(cb, nullptr).iterator->second;
                    if (blockInfo)
                        break;
                    blockInfo = adoptPtr(new RenderBlockSelectionInfo(cb));
                    cb = cb->containingBlock();
                }
            }
        }

        os = os->nextInPreOrder();
    }

    // Now clear the selection.
    SelectedObjectMap::iterator oldObjectsEnd = oldSelectedObjects.end();
    for (SelectedObjectMap::iterator i = oldSelectedObjects.begin(); i != oldObjectsEnd; ++i)
        i->first->setSelectionStateIfNeeded(SelectionNone);

    // set selection start and end
    m_selectionStart = start;
    m_selectionStartPos = startPos;
    m_selectionEnd = end;
    m_selectionEndPos = endPos;

    // Update the selection status of all objects between m_selectionStart and m_selectionEnd
    if (start && start == end)
        start->setSelectionStateIfNeeded(SelectionBoth);
    else {
        if (start)
            start->setSelectionStateIfNeeded(SelectionStart);
        if (end)
            end->setSelectionStateIfNeeded(SelectionEnd);
    }

    RenderObject* o = start;
    stop = rendererAfterPosition(end, endPos);

    while (o && o != stop) {
        if (o != start && o != end && o->canBeSelectionLeaf())
            o->setSelectionStateIfNeeded(SelectionInside);
        o = o->nextInPreOrder();
    }

    if (blockRepaintMode != RepaintNothing)
        m_layer->clearBlockSelectionGapsBounds();

    // Now that the selection state has been updated for the new objects, walk them again and
    // put them in the new objects list.
    o = start;
    while (o && o != stop) {
        if ((o->canBeSelectionLeaf() || o == start || o == end) && o->selectionState() != SelectionNone) {
            newSelectedObjects.set(o, adoptPtr(new RenderSelectionInfo(o, true)));
            RenderBlock* cb = o->containingBlock();
            while (cb && !cb->isRenderView()) {
                OwnPtr<RenderBlockSelectionInfo>& blockInfo = newSelectedBlocks.add(cb, nullptr).iterator->second;
                if (blockInfo)
                    break;
                blockInfo = adoptPtr(new RenderBlockSelectionInfo(cb));
                cb = cb->containingBlock();
            }
        }

        o = o->nextInPreOrder();
    }

    if (!m_frameView || blockRepaintMode == RepaintNothing)
        return;

    m_frameView->beginDeferredRepaints();

    // Have any of the old selected objects changed compared to the new selection?
    for (SelectedObjectMap::iterator i = oldSelectedObjects.begin(); i != oldObjectsEnd; ++i) {
        RenderObject* obj = i->first;
        RenderSelectionInfo* newInfo = newSelectedObjects.get(obj);
        RenderSelectionInfo* oldInfo = i->second.get();
        if (!newInfo || oldInfo->rect() != newInfo->rect() || oldInfo->state() != newInfo->state() ||
            (m_selectionStart == obj && oldStartPos != m_selectionStartPos) ||
            (m_selectionEnd == obj && oldEndPos != m_selectionEndPos)) {
            oldInfo->repaint();
            if (newInfo) {
                newInfo->repaint();
                newSelectedObjects.remove(obj);
            }
        }
    }

    // Any new objects that remain were not found in the old objects dict, and so they need to be updated.
    SelectedObjectMap::iterator newObjectsEnd = newSelectedObjects.end();
    for (SelectedObjectMap::iterator i = newSelectedObjects.begin(); i != newObjectsEnd; ++i)
        i->second->repaint();

    // Have any of the old blocks changed?
    SelectedBlockMap::iterator oldBlocksEnd = oldSelectedBlocks.end();
    for (SelectedBlockMap::iterator i = oldSelectedBlocks.begin(); i != oldBlocksEnd; ++i) {
        RenderBlock* block = i->first;
        RenderBlockSelectionInfo* newInfo = newSelectedBlocks.get(block);
        RenderBlockSelectionInfo* oldInfo = i->second.get();
        if (!newInfo || oldInfo->rects() != newInfo->rects() || oldInfo->state() != newInfo->state()) {
            oldInfo->repaint();
            if (newInfo) {
                newInfo->repaint();
                newSelectedBlocks.remove(block);
            }
        }
    }

    // Any new blocks that remain were not found in the old blocks dict, and so they need to be updated.
    SelectedBlockMap::iterator newBlocksEnd = newSelectedBlocks.end();
    for (SelectedBlockMap::iterator i = newSelectedBlocks.begin(); i != newBlocksEnd; ++i)
        i->second->repaint();

    m_frameView->endDeferredRepaints();
}
Esempio n. 2
0
void RenderView::setSelection(RenderObject* start, int startPos, RenderObject* end, int endPos, SelectionPaintInvalidationMode blockPaintInvalidationMode)
{
    // This code makes no assumptions as to if the rendering tree is up to date or not
    // and will not try to update it. Currently clearSelection calls this
    // (intentionally) without updating the rendering tree as it doesn't care.
    // Other callers may want to force recalc style before calling this.

    // Make sure both our start and end objects are defined.
    // Check www.msnbc.com and try clicking around to find the case where this happened.
    if ((start && !end) || (end && !start))
        return;

    // Just return if the selection hasn't changed.
    if (m_selectionStart == start && m_selectionStartPos == startPos &&
        m_selectionEnd == end && m_selectionEndPos == endPos)
        return;

    // Record the old selected objects.  These will be used later
    // when we compare against the new selected objects.
    int oldStartPos = m_selectionStartPos;
    int oldEndPos = m_selectionEndPos;

    // Objects each have a single selection rect to examine.
    typedef HashMap<RawPtr<RenderObject>, OwnPtr<RenderSelectionInfo> > SelectedObjectMap;
    SelectedObjectMap oldSelectedObjects;
    SelectedObjectMap newSelectedObjects;

    // Blocks contain selected objects and fill gaps between them, either on the left, right, or in between lines and blocks.
    // In order to get the paint invalidation rect right, we have to examine left, middle, and right rects individually, since otherwise
    // the union of those rects might remain the same even when changes have occurred.
    typedef HashMap<RawPtr<RenderBlock>, OwnPtr<RenderBlockSelectionInfo> > SelectedBlockMap;
    SelectedBlockMap oldSelectedBlocks;
    SelectedBlockMap newSelectedBlocks;

    RenderObject* os = m_selectionStart;
    RenderObject* stop = rendererAfterPosition(m_selectionEnd, m_selectionEndPos);
    bool exploringBackwards = false;
    bool continueExploring = os && (os != stop);
    while (continueExploring) {
        if ((os->canBeSelectionLeaf() || os == m_selectionStart || os == m_selectionEnd) && os->selectionState() != SelectionNone) {
            // Blocks are responsible for painting line gaps and margin gaps.  They must be examined as well.
            oldSelectedObjects.set(os, adoptPtr(new RenderSelectionInfo(os, true)));
            if (blockPaintInvalidationMode == PaintInvalidationNewXOROld) {
                RenderBlock* cb = os->containingBlock();
                while (cb && !cb->isRenderView()) {
                    OwnPtr<RenderBlockSelectionInfo>& blockInfo = oldSelectedBlocks.add(cb, nullptr).storedValue->value;
                    if (blockInfo)
                        break;
                    blockInfo = adoptPtr(new RenderBlockSelectionInfo(cb));
                    cb = cb->containingBlock();
                }
            }
        }

        os = getNextOrPrevRenderObjectBasedOnDirection(os, stop, continueExploring, exploringBackwards);
    }

    // Now clear the selection.
    SelectedObjectMap::iterator oldObjectsEnd = oldSelectedObjects.end();
    for (SelectedObjectMap::iterator i = oldSelectedObjects.begin(); i != oldObjectsEnd; ++i)
        i->key->setSelectionStateIfNeeded(SelectionNone);

    // set selection start and end
    m_selectionStart = start;
    m_selectionStartPos = startPos;
    m_selectionEnd = end;
    m_selectionEndPos = endPos;

    // Update the selection status of all objects between m_selectionStart and m_selectionEnd
    if (start && start == end)
        start->setSelectionStateIfNeeded(SelectionBoth);
    else {
        if (start)
            start->setSelectionStateIfNeeded(SelectionStart);
        if (end)
            end->setSelectionStateIfNeeded(SelectionEnd);
    }

    RenderObject* o = start;
    stop = rendererAfterPosition(end, endPos);

    while (o && o != stop) {
        if (o != start && o != end && o->canBeSelectionLeaf())
            o->setSelectionStateIfNeeded(SelectionInside);
        o = o->nextInPreOrder();
    }

    if (blockPaintInvalidationMode != PaintInvalidationNothing)
        layer()->clearBlockSelectionGapsBounds();

    // Now that the selection state has been updated for the new objects, walk them again and
    // put them in the new objects list.
    o = start;
    exploringBackwards = false;
    continueExploring = o && (o != stop);
    while (continueExploring) {
        if ((o->canBeSelectionLeaf() || o == start || o == end) && o->selectionState() != SelectionNone) {
            newSelectedObjects.set(o, adoptPtr(new RenderSelectionInfo(o, true)));
            RenderBlock* cb = o->containingBlock();
            while (cb && !cb->isRenderView()) {
                OwnPtr<RenderBlockSelectionInfo>& blockInfo = newSelectedBlocks.add(cb, nullptr).storedValue->value;
                if (blockInfo)
                    break;
                blockInfo = adoptPtr(new RenderBlockSelectionInfo(cb));
                cb = cb->containingBlock();
            }
        }

        o = getNextOrPrevRenderObjectBasedOnDirection(o, stop, continueExploring, exploringBackwards);
    }

    if (!m_frameView || blockPaintInvalidationMode == PaintInvalidationNothing)
        return;

    // For querying RenderLayer::compositingState()
    // FIXME: this is wrong, selection should not cause eager invalidation. crbug.com/407416
    DisableCompositingQueryAsserts disabler;

    // Have any of the old selected objects changed compared to the new selection?
    for (SelectedObjectMap::iterator i = oldSelectedObjects.begin(); i != oldObjectsEnd; ++i) {
        RenderObject* obj = i->key;
        RenderSelectionInfo* newInfo = newSelectedObjects.get(obj);
        RenderSelectionInfo* oldInfo = i->value.get();
        if (!newInfo || oldInfo->rect() != newInfo->rect() || oldInfo->state() != newInfo->state() ||
            (m_selectionStart == obj && oldStartPos != m_selectionStartPos) ||
            (m_selectionEnd == obj && oldEndPos != m_selectionEndPos)) {
            oldInfo->invalidatePaint();
            if (newInfo) {
                newInfo->invalidatePaint();
                newSelectedObjects.remove(obj);
            }
        }
    }

    // Any new objects that remain were not found in the old objects dict, and so they need to be updated.
    SelectedObjectMap::iterator newObjectsEnd = newSelectedObjects.end();
    for (SelectedObjectMap::iterator i = newSelectedObjects.begin(); i != newObjectsEnd; ++i)
        i->value->invalidatePaint();

    // Have any of the old blocks changed?
    SelectedBlockMap::iterator oldBlocksEnd = oldSelectedBlocks.end();
    for (SelectedBlockMap::iterator i = oldSelectedBlocks.begin(); i != oldBlocksEnd; ++i) {
        RenderBlock* block = i->key;
        RenderBlockSelectionInfo* newInfo = newSelectedBlocks.get(block);
        RenderBlockSelectionInfo* oldInfo = i->value.get();
        if (!newInfo || oldInfo->rects() != newInfo->rects() || oldInfo->state() != newInfo->state()) {
            oldInfo->invalidatePaint();
            if (newInfo) {
                newInfo->invalidatePaint();
                newSelectedBlocks.remove(block);
            }
        }
    }

    // Any new blocks that remain were not found in the old blocks dict, and so they need to be updated.
    SelectedBlockMap::iterator newBlocksEnd = newSelectedBlocks.end();
    for (SelectedBlockMap::iterator i = newSelectedBlocks.begin(); i != newBlocksEnd; ++i)
        i->value->invalidatePaint();
}