bool BOARD::CombineAreas( PICKED_ITEMS_LIST* aDeletedList, ZONE_CONTAINER* area_ref,
ZONE_CONTAINER* area_to_combine )
{
if( area_ref == area_to_combine )
{
wxASSERT( 0 );
return false;
}
SHAPE_POLY_SET mergedOutlines = *area_ref->Outline();
SHAPE_POLY_SET areaToMergePoly = *area_to_combine->Outline();
mergedOutlines.BooleanAdd( areaToMergePoly, SHAPE_POLY_SET::PM_FAST );
mergedOutlines.Simplify( SHAPE_POLY_SET::PM_FAST );
// We should have one polygon with hole
// We can have 2 polygons with hole, if the 2 initial polygons have only one common corner
// and therefore cannot be merged (they are dectected as intersecting)
// but we should never have more than 2 polys
if( mergedOutlines.OutlineCount() > 2 )
{
wxLogMessage(wxT("BOARD::CombineAreas error: more than 2 polys after merging") );
return false;
}
if( mergedOutlines.OutlineCount() > 1 )
return false;
// Update the area with the new merged outline
delete area_ref->Outline();
area_ref->SetOutline( new SHAPE_POLY_SET( mergedOutlines ) );
RemoveArea( aDeletedList, area_to_combine );
area_ref->SetLocalFlags( 1 );
area_ref->Hatch();
return true;
}
void C3D_RENDER_OGL_LEGACY::reload( REPORTER *aStatusTextReporter )
{
m_reloadRequested = false;
ogl_free_all_display_lists();
COBJECT2D_STATS::Instance().ResetStats();
#ifdef PRINT_STATISTICS_3D_VIEWER
printf("InitSettings...\n");
#endif
unsigned stats_startReloadTime = GetRunningMicroSecs();
m_settings.InitSettings( aStatusTextReporter );
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_endReloadTime = GetRunningMicroSecs();
#endif
SFVEC3F camera_pos = m_settings.GetBoardCenter3DU();
m_settings.CameraGet().SetBoardLookAtPos( camera_pos );
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_start_OpenGL_Load_Time = GetRunningMicroSecs();
#endif
if( aStatusTextReporter )
aStatusTextReporter->Report( _( "Load OpenGL: board" ) );
// Create Board
// /////////////////////////////////////////////////////////////////////////
CCONTAINER2D boardContainer;
Convert_shape_line_polygon_to_triangles( m_settings.GetBoardPoly(),
boardContainer,
m_settings.BiuTo3Dunits(),
(const BOARD_ITEM &)*m_settings.GetBoard() );
const LIST_OBJECT2D &listBoardObject2d = boardContainer.GetList();
if( listBoardObject2d.size() > 0 )
{
// We will set a unitary Z so it will in future used with transformations
// since the board poly will be used not only to draw itself but also the
// solder mask layers.
const float layer_z_top = 1.0f;
const float layer_z_bot = 0.0f;
CLAYER_TRIANGLES *layerTriangles = new CLAYER_TRIANGLES( listBoardObject2d.size() );
// Convert the list of objects(triangles) to triangle layer structure
for( LIST_OBJECT2D::const_iterator itemOnLayer = listBoardObject2d.begin();
itemOnLayer != listBoardObject2d.end();
++itemOnLayer )
{
const COBJECT2D *object2d_A = static_cast<const COBJECT2D *>(*itemOnLayer);
wxASSERT( object2d_A->GetObjectType() == OBJ2D_TRIANGLE );
const CTRIANGLE2D *tri = (const CTRIANGLE2D *)object2d_A;
const SFVEC2F &v1 = tri->GetP1();
const SFVEC2F &v2 = tri->GetP2();
const SFVEC2F &v3 = tri->GetP3();
add_triangle_top_bot( layerTriangles,
v1,
v2,
v3,
layer_z_top,
layer_z_bot );
}
const SHAPE_POLY_SET &boardPoly = m_settings.GetBoardPoly();
wxASSERT( boardPoly.OutlineCount() > 0 );
if( boardPoly.OutlineCount() > 0 )
{
layerTriangles->AddToMiddleContourns( boardPoly,
layer_z_bot,
layer_z_top,
m_settings.BiuTo3Dunits(),
false );
m_ogl_disp_list_board = new CLAYERS_OGL_DISP_LISTS( *layerTriangles,
m_ogl_circle_texture,
layer_z_top,
layer_z_top );
}
delete layerTriangles;
}
// Create Through Holes and vias
// /////////////////////////////////////////////////////////////////////////
if( aStatusTextReporter )
aStatusTextReporter->Report( _( "Load OpenGL: holes and vias" ) );
m_ogl_disp_list_through_holes_outer = generate_holes_display_list(
m_settings.GetThroughHole_Outer().GetList(),
m_settings.GetThroughHole_Outer_poly(),
1.0f,
0.0f,
false );
SHAPE_POLY_SET bodyHoles = m_settings.GetThroughHole_Outer_poly();
bodyHoles.BooleanAdd( m_settings.GetThroughHole_Outer_poly_NPTH(),
SHAPE_POLY_SET::PM_FAST );
m_ogl_disp_list_through_holes_outer_with_npth = generate_holes_display_list(
m_settings.GetThroughHole_Outer().GetList(),
bodyHoles,
1.0f,
0.0f,
false );
m_ogl_disp_list_through_holes_inner = generate_holes_display_list(
m_settings.GetThroughHole_Inner().GetList(),
m_settings.GetThroughHole_Inner_poly(),
1.0f,
0.0f,
true );
m_ogl_disp_list_through_holes_vias_outer = generate_holes_display_list(
m_settings.GetThroughHole_Vias_Outer().GetList(),
m_settings.GetThroughHole_Vias_Outer_poly(),
1.0f,
0.0f,
false );
// Not in use
//m_ogl_disp_list_through_holes_vias_inner = generate_holes_display_list(
// m_settings.GetThroughHole_Vias_Inner().GetList(),
// m_settings.GetThroughHole_Vias_Inner_poly(),
// 1.0f, 0.0f,
// false );
const MAP_POLY & innerMapHoles = m_settings.GetPolyMapHoles_Inner();
const MAP_POLY & outerMapHoles = m_settings.GetPolyMapHoles_Outer();
wxASSERT( innerMapHoles.size() == outerMapHoles.size() );
const MAP_CONTAINER_2D &map_holes = m_settings.GetMapLayersHoles();
if( outerMapHoles.size() > 0 )
{
float layer_z_bot = 0.0f;
float layer_z_top = 0.0f;
for( MAP_POLY::const_iterator ii = outerMapHoles.begin();
ii != outerMapHoles.end();
++ii )
{
LAYER_ID layer_id = static_cast<LAYER_ID>(ii->first);
const SHAPE_POLY_SET *poly = static_cast<const SHAPE_POLY_SET *>(ii->second);
const CBVHCONTAINER2D *container = map_holes.at( layer_id );
get_layer_z_pos( layer_id, layer_z_top, layer_z_bot );
m_ogl_disp_lists_layers_holes_outer[layer_id] = generate_holes_display_list(
container->GetList(),
*poly,
layer_z_top,
layer_z_bot,
false );
}
for( MAP_POLY::const_iterator ii = innerMapHoles.begin();
ii != innerMapHoles.end();
++ii )
{
LAYER_ID layer_id = static_cast<LAYER_ID>(ii->first);
const SHAPE_POLY_SET *poly = static_cast<const SHAPE_POLY_SET *>(ii->second);
const CBVHCONTAINER2D *container = map_holes.at( layer_id );
get_layer_z_pos( layer_id, layer_z_top, layer_z_bot );
m_ogl_disp_lists_layers_holes_inner[layer_id] = generate_holes_display_list(
container->GetList(),
*poly,
layer_z_top,
layer_z_bot,
false );
}
}
// Generate vertical cylinders of vias and pads (copper)
generate_3D_Vias_and_Pads();
// Add layers maps
// /////////////////////////////////////////////////////////////////////////
if( aStatusTextReporter )
aStatusTextReporter->Report( _( "Load OpenGL: layers" ) );
for( MAP_CONTAINER_2D::const_iterator ii = m_settings.GetMapLayers().begin();
ii != m_settings.GetMapLayers().end();
++ii )
{
LAYER_ID layer_id = static_cast<LAYER_ID>(ii->first);
if( !m_settings.Is3DLayerEnabled( layer_id ) )
continue;
const CBVHCONTAINER2D *container2d = static_cast<const CBVHCONTAINER2D *>(ii->second);
const LIST_OBJECT2D &listObject2d = container2d->GetList();
if( listObject2d.size() == 0 )
continue;
float layer_z_bot = 0.0f;
float layer_z_top = 0.0f;
get_layer_z_pos( layer_id, layer_z_top, layer_z_bot );
// Calculate an estimation for the nr of triangles based on the nr of objects
unsigned int nrTrianglesEstimation = listObject2d.size() * 8;
CLAYER_TRIANGLES *layerTriangles = new CLAYER_TRIANGLES( nrTrianglesEstimation );
m_triangles[layer_id] = layerTriangles;
for( LIST_OBJECT2D::const_iterator itemOnLayer = listObject2d.begin();
itemOnLayer != listObject2d.end();
++itemOnLayer )
{
const COBJECT2D *object2d_A = static_cast<const COBJECT2D *>(*itemOnLayer);
switch( object2d_A->GetObjectType() )
{
case OBJ2D_FILLED_CIRCLE:
add_object_to_triangle_layer( (const CFILLEDCIRCLE2D *)object2d_A,
layerTriangles,
layer_z_top, layer_z_bot );
break;
case OBJ2D_POLYGON4PT:
add_object_to_triangle_layer( (const CPOLYGON4PTS2D *)object2d_A,
layerTriangles,
layer_z_top, layer_z_bot );
break;
case OBJ2D_RING:
add_object_to_triangle_layer( (const CRING2D *)object2d_A,
layerTriangles,
layer_z_top, layer_z_bot );
break;
case OBJ2D_TRIANGLE:
add_object_to_triangle_layer( (const CTRIANGLE2D *)object2d_A,
layerTriangles,
layer_z_top, layer_z_bot );
break;
case OBJ2D_ROUNDSEG:
add_object_to_triangle_layer( (const CROUNDSEGMENT2D *) object2d_A,
layerTriangles,
layer_z_top, layer_z_bot );
break;
default:
wxFAIL_MSG("C3D_RENDER_OGL_LEGACY: Object type is not implemented");
break;
}
}
const MAP_POLY &map_poly = m_settings.GetPolyMap();
if( map_poly.find( layer_id ) != map_poly.end() )
{
const SHAPE_POLY_SET *polyList = map_poly.at( layer_id );
layerTriangles->AddToMiddleContourns( *polyList,
layer_z_bot,
layer_z_top,
m_settings.BiuTo3Dunits(),
false );
}
// Create display list
// /////////////////////////////////////////////////////////////////////
m_ogl_disp_lists_layers[layer_id] = new CLAYERS_OGL_DISP_LISTS( *layerTriangles,
m_ogl_circle_texture,
layer_z_bot,
layer_z_top );
}// for each layer on map
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_end_OpenGL_Load_Time = GetRunningMicroSecs();
#endif
// Load 3D models
// /////////////////////////////////////////////////////////////////////////
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_start_models_Load_Time = GetRunningMicroSecs();
#endif
if( aStatusTextReporter )
aStatusTextReporter->Report( _( "Loading 3D models" ) );
load_3D_models();
#ifdef PRINT_STATISTICS_3D_VIEWER
unsigned stats_end_models_Load_Time = GetRunningMicroSecs();
printf( "C3D_RENDER_OGL_LEGACY::reload times:\n" );
printf( " Reload board: %.3f ms\n",
(float)( stats_endReloadTime - stats_startReloadTime ) / 1000.0f );
printf( " Loading to openGL: %.3f ms\n",
(float)( stats_end_OpenGL_Load_Time - stats_start_OpenGL_Load_Time ) / 1000.0f );
printf( " Loading 3D models: %.3f ms\n",
(float)( stats_end_models_Load_Time - stats_start_models_Load_Time ) / 1000.0f );
COBJECT2D_STATS::Instance().PrintStats();
#endif
if( aStatusTextReporter )
{
// Calculation time in seconds
const double calculation_time = (double)( GetRunningMicroSecs() -
stats_startReloadTime) / 1e6;
aStatusTextReporter->Report( wxString::Format( _( "Reload time %.3f s" ),
calculation_time ) );
}
}
/* Plot a solder mask layer.
* Solder mask layers have a minimum thickness value and cannot be drawn like standard layers,
* unless the minimum thickness is 0.
* Currently the algo is:
* 1 - build all pad shapes as polygons with a size inflated by
* mask clearance + (min width solder mask /2)
* 2 - Merge shapes
* 3 - deflate result by (min width solder mask /2)
* 4 - oring result by all pad shapes as polygons with a size inflated by
* mask clearance only (because deflate sometimes creates shape artifacts)
* 5 - draw result as polygons
*
* TODO:
* make this calculation only for shapes with clearance near than (min width solder mask)
* (using DRC algo)
* plot all other shapes by flashing the basing shape
* (shapes will be better, and calculations faster)
*/
void PlotSolderMaskLayer( BOARD *aBoard, PLOTTER* aPlotter,
LSET aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt,
int aMinThickness )
{
LAYER_ID layer = aLayerMask[B_Mask] ? B_Mask : F_Mask;
int inflate = aMinThickness/2;
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerSet( aLayerMask );
// Plot edge layer and graphic items
// They do not have a solder Mask margin, because they are only graphic items
// on this layer (like logos), not actually areas around pads.
itemplotter.PlotBoardGraphicItems();
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( layer != item->GetLayer() )
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
itemplotter.Plot_1_EdgeModule( (EDGE_MODULE*) item );
break;
default:
break;
}
}
}
// Build polygons for each pad shape.
// the size of the shape on solder mask should be:
// size of pad + clearance around the pad.
// clearance = solder mask clearance + extra margin
// extra margin is half the min width for solder mask
// This extra margin is used to merge too close shapes
// (distance < aMinThickness), and will be removed when creating
// the actual shapes
SHAPE_POLY_SET areas; // Contains shapes to plot
SHAPE_POLY_SET initialPolys; // Contains exact shapes to plot
/* calculates the coeff to compensate radius reduction of holes clearance
* due to the segment approx ( 1 /cos( PI/circleToSegmentsCount )
*/
int circleToSegmentsCount = 32;
double correction = 1.0 / cos( M_PI / circleToSegmentsCount );
// Plot pads
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
// add shapes with exact size
module->TransformPadsShapesWithClearanceToPolygon( layer,
initialPolys, 0,
circleToSegmentsCount, correction );
// add shapes inflated by aMinThickness/2
module->TransformPadsShapesWithClearanceToPolygon( layer,
areas, inflate,
circleToSegmentsCount, correction );
}
// Plot vias on solder masks, if aPlotOpt.GetPlotViaOnMaskLayer() is true,
if( aPlotOpt.GetPlotViaOnMaskLayer() )
{
// The current layer is a solder mask,
// use the global mask clearance for vias
int via_clearance = aBoard->GetDesignSettings().m_SolderMaskMargin;
int via_margin = via_clearance + inflate;
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
const VIA* via = dyn_cast<const VIA*>( track );
if( !via )
continue;
// vias are plotted only if they are on the corresponding
// external copper layer
LSET via_set = via->GetLayerSet();
if( via_set[B_Cu] )
via_set.set( B_Mask );
if( via_set[F_Cu] )
via_set.set( F_Mask );
if( !( via_set & aLayerMask ).any() )
continue;
via->TransformShapeWithClearanceToPolygon( areas, via_margin,
circleToSegmentsCount,
correction );
via->TransformShapeWithClearanceToPolygon( initialPolys, via_clearance,
circleToSegmentsCount,
correction );
}
}
// Add filled zone areas.
#if 0 // Set to 1 if a solder mask margin must be applied to zones on solder mask
int zone_margin = aBoard->GetDesignSettings().m_SolderMaskMargin;
#else
int zone_margin = 0;
#endif
for( int ii = 0; ii < aBoard->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = aBoard->GetArea( ii );
if( zone->GetLayer() != layer )
continue;
zone->TransformOutlinesShapeWithClearanceToPolygon( areas,
inflate+zone_margin, false );
zone->TransformOutlinesShapeWithClearanceToPolygon( initialPolys,
zone_margin, false );
}
// To avoid a lot of code, use a ZONE_CONTAINER
// to handle and plot polygons, because our polygons look exactly like
// filled areas in zones
// Note, also this code is not optimized: it creates a lot of copy/duplicate data
// However it is not complex, and fast enough for plot purposes (copy/convert data
// is only a very small calculation time for these calculations)
ZONE_CONTAINER zone( aBoard );
zone.SetArcSegmentCount( 32 );
zone.SetMinThickness( 0 ); // trace polygons only
zone.SetLayer ( layer );
areas.BooleanAdd( initialPolys );
areas.Inflate( -inflate, circleToSegmentsCount );
// Combine the current areas to initial areas. This is mandatory because
// inflate/deflate transform is not perfect, and we want the initial areas perfectly kept
areas.BooleanAdd( initialPolys );
areas.Fracture();
zone.AddFilledPolysList( areas );
itemplotter.PlotFilledAreas( &zone );
}
/**
* DXF polygon: doesn't fill it but at least it close the filled ones
* DXF does not know thick outline.
* It does not know thhick segments, therefore filled polygons with thick outline
* are converted to inflated polygon by aWidth/2
*/
void DXF_PLOTTER::PlotPoly( const std::vector<wxPoint>& aCornerList,
FILL_T aFill, int aWidth)
{
if( aCornerList.size() <= 1 )
return;
unsigned last = aCornerList.size() - 1;
// Plot outlines with lines (thickness = 0) to define the polygon
if( aWidth <= 0 )
{
MoveTo( aCornerList[0] );
for( unsigned ii = 1; ii < aCornerList.size(); ii++ )
LineTo( aCornerList[ii] );
// Close polygon if 'fill' requested
if( aFill )
{
if( aCornerList[last] != aCornerList[0] )
LineTo( aCornerList[0] );
}
PenFinish();
return;
}
// if the polygon outline has thickness, and is not filled
// (i.e. is a polyline) plot outlines with thick segments
if( aWidth > 0 && !aFill )
{
MoveTo( aCornerList[0] );
for( unsigned ii = 1; ii < aCornerList.size(); ii++ )
ThickSegment( aCornerList[ii-1], aCornerList[ii],
aWidth, FILLED );
return;
}
// The polygon outline has thickness, and is filled
// Build and plot the polygon which contains the initial
// polygon and its thick outline
SHAPE_POLY_SET bufferOutline;
SHAPE_POLY_SET bufferPolybase;
const int circleToSegmentsCount = 16;
bufferPolybase.NewOutline();
// enter outline as polygon:
for( unsigned ii = 1; ii < aCornerList.size(); ii++ )
{
TransformRoundedEndsSegmentToPolygon( bufferOutline,
aCornerList[ii-1], aCornerList[ii], circleToSegmentsCount, aWidth );
}
// enter the initial polygon:
for( unsigned ii = 0; ii < aCornerList.size(); ii++ )
{
bufferPolybase.Append( aCornerList[ii] );
}
// Merge polygons to build the polygon which contains the initial
// polygon and its thick outline
bufferPolybase.BooleanAdd( bufferOutline ); // create the outline which contains thick outline
bufferPolybase.Fracture();
if( bufferPolybase.OutlineCount() < 1 ) // should not happen
return;
const SHAPE_LINE_CHAIN& path = bufferPolybase.COutline( 0 );
if( path.PointCount() < 2 ) // should not happen
return;
// Now, output the final polygon to DXF file:
last = path.PointCount() - 1;
VECTOR2I point = path.CPoint( 0 );
wxPoint startPoint( point.x, point.y );
MoveTo( startPoint );
for( int ii = 1; ii < path.PointCount(); ii++ )
{
point = path.CPoint( ii );
LineTo( wxPoint( point.x, point.y ) );
}
// Close polygon, if needed
point = path.CPoint( last );
wxPoint endPoint( point.x, point.y );
if( endPoint != startPoint )
LineTo( startPoint );
PenFinish();
}
void TransformRoundChamferedRectToPolygon( SHAPE_POLY_SET& aCornerBuffer,
const wxPoint& aPosition, const wxSize& aSize,
double aRotation, int aCornerRadius,
double aChamferRatio, int aChamferCorners,
int aCircleToSegmentsCount )
{
// Build the basic shape in orientation 0.0, position 0,0 for chamfered corners
// or in actual position/orientation for round rect only
wxPoint corners[4];
GetRoundRectCornerCenters( corners, aCornerRadius,
aChamferCorners ? wxPoint( 0, 0 ) : aPosition,
aSize, aChamferCorners ? 0.0 : aRotation );
SHAPE_POLY_SET outline;
outline.NewOutline();
for( int ii = 0; ii < 4; ++ii )
outline.Append( corners[ii].x, corners[ii].y );
outline.Inflate( aCornerRadius, aCircleToSegmentsCount );
if( aChamferCorners == RECT_NO_CHAMFER ) // no chamfer
{
// Add the outline:
aCornerBuffer.Append( outline );
return;
}
// Now we have the round rect outline, in position 0,0 orientation 0.0.
// Chamfer the corner(s).
int chamfer_value = aChamferRatio * std::min( aSize.x, aSize.y );
SHAPE_POLY_SET chamfered_corner; // corner shape for the current corner to chamfer
int corner_id[4] =
{
RECT_CHAMFER_TOP_LEFT, RECT_CHAMFER_TOP_RIGHT,
RECT_CHAMFER_BOTTOM_LEFT, RECT_CHAMFER_BOTTOM_RIGHT
};
// Depending on the corner position, signX[] and signY[] give the sign of chamfer
// coordinates relative to the corner position
// The first corner is the top left corner, then top right, bottom left and bottom right
int signX[4] = {1, -1, 1,-1 };
int signY[4] = {1, 1, -1,-1 };
for( int ii = 0; ii < 4; ii++ )
{
if( (corner_id[ii] & aChamferCorners) == 0 )
continue;
VECTOR2I corner_pos( -signX[ii]*aSize.x/2, -signY[ii]*aSize.y/2 );
if( aCornerRadius )
{
// We recreate a rectangular area covering the full rounded corner (max size = aSize/2)
// to rebuild the corner before chamfering, to be sure the rounded corner shape does not
// overlap the chamfered corner shape:
chamfered_corner.RemoveAllContours();
chamfered_corner.NewOutline();
chamfered_corner.Append( 0, 0 );
chamfered_corner.Append( 0, signY[ii]*aSize.y/2 );
chamfered_corner.Append( signX[ii]*aSize.x/2, signY[ii]*aSize.y/2 );
chamfered_corner.Append( signX[ii]*aSize.x/2, 0 );
chamfered_corner.Move( corner_pos );
outline.BooleanAdd( chamfered_corner, SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
}
// Now chamfer this corner
chamfered_corner.RemoveAllContours();
chamfered_corner.NewOutline();
chamfered_corner.Append( 0, 0 );
chamfered_corner.Append( 0, signY[ii]*chamfer_value );
chamfered_corner.Append( signX[ii]*chamfer_value, 0 );
chamfered_corner.Move( corner_pos );
outline.BooleanSubtract( chamfered_corner, SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
}
// Rotate and move the outline:
if( aRotation != 0.0 )
outline.Rotate( DECIDEG2RAD( -aRotation ), VECTOR2I( 0, 0 ) );
outline.Move( VECTOR2I( aPosition ) );
// Add the outline:
aCornerBuffer.Append( outline );
}