void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Noise type"), nType, nTypeList);
S.TieTextBox(_("Amplitude (0-1)"), nAmplitude, 10);
S.AddPrompt(_("Duration"));
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void EffectNoise::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(nTypes == WXSIZEOF(kTypeStrings));
S.StartMultiColumn(2, wxCENTER);
{
auto typeChoices = LocalizedStrings(kTypeStrings, nTypes);
S.AddChoice(_("Noise type:"), wxT(""), &typeChoices)->SetValidator(wxGenericValidator(&mType));
FloatingPointValidator<double> vldAmp(6, &mAmp, NumValidatorStyle::NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amp, MAX_Amp);
S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mNoiseDurationT = safenew
NumericTextCtrl(S.GetParent(), wxID_ANY,
NumericConverter::TIME,
GetDurationFormat(),
GetDuration(),
mProjectRate,
NumericTextCtrl::Options{}
.AutoPos(true));
mNoiseDurationT->SetName(_("Duration"));
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
/// Populates simple dialog that has a single tone.
void ToneGenDialog::PopulateOrExchangeStandard( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Waveform") + wxString(wxT(":")), waveform, waveforms);
S.SetSizeHints(-1, -1);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Frequency (Hz)") + wxString(wxT(":")), frequency[0], 5);
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), amplitude[0], 5);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mToneDurationT == NULL)
{
mToneDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
mDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->SetFormatString(mToneDurationT->GetBuiltinFormat(isSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mToneDurationT->EnableMenu();
}
S.AddWindow(mToneDurationT);
}
S.EndMultiColumn();
}
void EffectSilence::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay();
{
S.AddPrompt(_("Duration:"));
mDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDurationT->SetName(_("Duration"));
mDurationT->EnableMenu();
S.AddWindow(mDurationT, wxALIGN_CENTER | wxALL);
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
return;
}
void EffectNoise::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
S.StartMultiColumn(2, wxCENTER);
{
S.AddChoice(_("Noise type:"), wxT(""), &typeChoices)->SetValidator(wxGenericValidator(&mType));
FloatingPointValidator<double> vldAmp(6, &mAmp, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amp, MAX_Amp);
S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mNoiseDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->EnableMenu();
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void EffectDtmf::PopulateOrExchange(ShuttleGui & S)
{
// dialog will be passed values from effect
// Effect retrieves values from saved config
// Dialog will take care of using them to initialize controls
// If there is a selection, use that duration, otherwise use
// value from saved config: this is useful is user wants to
// replace selection with dtmf sequence
S.AddSpace(0, 5);
S.StartMultiColumn(2, wxCENTER);
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST, &dtmfSequence);
vldDtmf.SetIncludes(wxArrayString(WXSIZEOF(kSymbols), kSymbols));
mDtmfSequenceT = S.Id(ID_Sequence).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfSequenceT->SetValidator(vldDtmf);
FloatingPointValidator<double> vldAmp(3, &dtmfAmplitude, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amplitude, MAX_Amplitude);
S.Id(ID_Amplitude).AddTextBox(_("Amplitude (0-1):"), wxT(""), 10)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mDtmfDurationT = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_Duration,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->EnableMenu();
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyCycleS = S.Id(ID_DutyCycle).AddSlider( {},
dtmfDutyCycle * SCL_DutyCycle,
MAX_DutyCycle * SCL_DutyCycle,
MIN_DutyCycle * SCL_DutyCycle);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.AddVariableText(wxString::Format(wxT("%.1f %%"), dtmfDutyCycle), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.AddVariableText(wxString::Format(wxString(wxT("%.0f ")) + _("ms"), dtmfTone * 1000.0), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.AddVariableText(wxString::Format(wxString(wxT("%0.f ")) + _("ms"), dtmfSilence * 1000.0), false);
}
S.EndMultiColumn();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), dAmplitude, 10);
S.AddPrompt(_("Duration:"));
if (mDtmfDurationT == NULL)
{
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
wxT(""),
dDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to the
* effect, I want it (dDuration) to be used as the duration, and with
* "seconds" this does not always work properly. For example, it rounds
* down to zero... */
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
mDtmfDurationT->EnableMenu();
}
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
wxArrayString empty;
S.SetBorder(2);
S.StartStatic(_("Interface"));
{
S.StartMultiColumn(2);
{
S.Id(HostID);
mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
wxT("/MidiIO/Host"),
wxT(""),
mHostNames,
mHostLabels);
S.SetSizeHints(mHostNames);
S.AddPrompt(_("Using:"));
S.AddFixedText(wxString(Pa_GetVersionText(), wxConvLocal));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Playback"));
{
S.StartMultiColumn(2);
{
S.Id(PlayID);
mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Recording"));
{
S.StartMultiColumn(2);
{
S.Id(RecordID);
mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
S.Id(ChannelsID);
/*
mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
wxEmptyString,
&empty);
*/
}
S.EndMultiColumn();
}
S.EndStatic();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(20, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura (2006)"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
S.AddPrompt(_("DTMF duration:"));
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
/*
use this instead of "seconds" because if a selection is passed to the effect,
I want it (dDuration) to be used as the duration, and with "seconds" this does
not always work properly. For example, it rounds down to zero...
*/
TimeTextCtrl::GetBuiltinFormat(dIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))),
dDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
S.AddWindow(mDtmfDurationT);
mDtmfDurationT->EnableMenu();
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX);
mDtmfDutyS->SetRange(DUTY_MIN, DUTY_MAX);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void EffectChangeSpeed::PopulateOrExchange(ShuttleGui & S)
{
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("TimeFormat"), mFormat, mFormat);
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl, mFromVinyl);
S.SetBorder(5);
S.StartVerticalLay(0);
{
S.AddSpace(0, 5);
S.AddTitle(_("Change Speed, affecting both Tempo and Pitch"));
S.AddSpace(0, 10);
// Speed multiplier and percent change controls.
S.StartMultiColumn(4, wxCENTER);
{
FloatingPointValidator<double> vldMultiplier(3, &mMultiplier, NUM_VAL_THREE_TRAILING_ZEROES);
vldMultiplier.SetRange(MIN_Percentage / 100.0, ((MAX_Percentage / 100.0) + 1));
mpTextCtrl_Multiplier =
S.Id(ID_Multiplier).AddTextBox(_("Speed Multiplier:"), wxT(""), 12);
mpTextCtrl_Multiplier->SetValidator(vldMultiplier);
FloatingPointValidator<double> vldPercentage(3, &m_PercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
mpTextCtrl_PercentChange =
S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
mpTextCtrl_PercentChange->SetValidator(vldPercentage);
}
S.EndMultiColumn();
// Percent change slider.
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mpSlider_PercentChange =
S.Id(ID_PercentChange).AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
mpSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
// Vinyl rpm controls.
S.StartMultiColumn(5, wxCENTER);
{
/* i18n-hint: "rpm" is an English abbreviation meaning "revolutions per minute". */
S.AddUnits(_("Standard Vinyl rpm:"));
wxASSERT(kNumVinyl == WXSIZEOF(kVinylStrings));
wxArrayString vinylChoices;
for (int i = 0; i < kNumVinyl; i++)
{
if (i == kVinyl_NA)
{
vinylChoices.Add(wxGetTranslation(kVinylStrings[i]));
}
else
{
vinylChoices.Add(kVinylStrings[i]);
}
}
mpChoice_FromVinyl =
S.Id(ID_FromVinyl).AddChoice(_("from"), wxT(""), &vinylChoices);
mpChoice_FromVinyl->SetName(_("From rpm"));
mpChoice_FromVinyl->SetSizeHints(100, -1);
mpChoice_ToVinyl =
S.Id(ID_ToVinyl).AddChoice(_("to"), wxT(""), &vinylChoices);
mpChoice_ToVinyl->SetName(_("To rpm"));
mpChoice_ToVinyl->SetSizeHints(100, -1);
}
S.EndMultiColumn();
// From/To time controls.
S.StartStatic(_("Selection Length"), 0);
{
S.StartMultiColumn(2, wxALIGN_LEFT);
{
S.AddPrompt(_("Current Length:"));
mpFromLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
mFormat,
mFromLength,
mProjectRate);
mpFromLengthCtrl->SetName(_("from"));
mpFromLengthCtrl->SetToolTip(_("Current length of selection."));
mpFromLengthCtrl->SetReadOnly(true);
mpFromLengthCtrl->EnableMenu(false);
S.AddWindow(mpFromLengthCtrl, wxALIGN_LEFT);
S.AddPrompt(_("New Length:"));
mpToLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_ToLength,
mFormat,
mToLength,
mProjectRate);
mpToLengthCtrl->SetName(_("to"));
mpToLengthCtrl->EnableMenu();
S.AddWindow(mpToLengthCtrl, wxALIGN_LEFT);
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndVerticalLay();
}
void ExportMultiple::PopulateOrExchange(ShuttleGui& S)
{
S.SetBorder(5);
S.StartMultiColumn(4, true);
{
wxArrayString formats;
for (size_t i = 0; i < mPlugins.GetCount(); i++) {
formats.Add(mPlugins[i]->GetDescription());
}
S.AddPrompt(_("Export format:"));
mFormat = S.Id(FormatID)
.TieChoice(wxT(""),
wxT("/Export/MultipleFormat"),
gPrefs->Read(wxT("/Export/Format"), wxT("WAV")),
formats,
formats);
S.Id(OptionsID).AddButton(_("Options..."));
S.AddVariableText(wxT(""), false);
S.AddPrompt(_("Export location:"));
mDir = S.Id(DirID)
.TieTextBox(wxT(""),
wxT("/Export/MultiplePath"),
gPrefs->Read(wxT("/Export/Path"), ::wxGetCwd()),
64);
S.Id(ChooseID).AddButton(_("Choose..."));
S.Id(CreateID).AddButton(_("Create"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxEXPAND, true);
{
S.SetBorder(5);
S.StartStatic(_("Split files based on:"), true);
{
S.StartMultiColumn(2, false);
S.SetStretchyCol(1);
{
// Row 1
S.SetBorder(1);
mLabel = S.Id(LabelID)
.AddRadioButton(wxT(""));
S.SetBorder(3);
mLabelLabel = S.AddVariableText(_("Labels"), false);
// Row 2
S.AddVariableText(wxT(""), false);
mFirst = S.Id(FirstID)
.AddCheckBox(_("Include audio before first label"), wxT("false"));
// Row 3
S.AddVariableText(wxT(""), false);
S.StartHorizontalLay(wxEXPAND, false);
{
mFirstFileLabel = S.AddVariableText(_("First file name:"), true);
mFirstFileName = S.Id(FirstFileNameID)
.TieTextBox(wxT(""),
wxT("/Export/MultipleFirstName"),
wxT(""),
30);
}
S.EndHorizontalLay();
// Row 4
S.SetBorder(1);
mTrack = S.Id(TrackID)
.AddRadioButtonToGroup(wxT(""));
S.SetBorder(3);
mTrackLabel = S.AddVariableText(_("Tracks"), false);
}
S.EndMultiColumn();
}
S.EndStatic();
S.SetBorder(5);
S.StartStatic(_("Name files:"), false);
{
S.StartMultiColumn(2, false);
S.SetStretchyCol(1);
{
// Row 1
S.SetBorder(1);
mByName = S.Id(ByNameID)
.AddRadioButton(wxT(""));
S.SetBorder(3);
mByNameLabel = S.AddVariableText(_("Using Label/Track Name"), false);
// Row 2
S.SetBorder(1);
mByNumber = S.Id(ByNumberID)
.AddRadioButtonToGroup(wxT(""));
S.SetBorder(3);
mByNumberLabel = S.AddVariableText(_("Numbering consecutively"), false);
// Row 3
S.AddVariableText(wxT(""), false);
S.StartHorizontalLay(wxEXPAND, false);
{
mPrefixLabel = S.AddVariableText(_("File name prefix:"), true);
mPrefix = S.Id(PrefixID)
.TieTextBox(wxT(""),
wxT("/Export/MultiplePrefix"),
wxT(""),
30);
}
S.EndHorizontalLay();
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
S.SetBorder(5);
S.StartHorizontalLay(wxEXPAND, false);
{
mOverwrite = S.Id(OverwriteID)
.AddCheckBox(_("Overwrite existing files"), wxT("true"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_CENTER, false);
{
#if defined(__WXGTK20__) || defined(__WXMAC__)
S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
mExport = S.Id(wxID_OK).AddButton(_("E&xport"));
#else
mExport = S.Id(wxID_OK).AddButton(_("E&xport"));
S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
#endif
mExport->SetDefault();
}
S.EndHorizontalLay();
}
void AudioIOPrefs::PopulateOrExchange( ShuttleGui & S )
{
/// \todo
/// JKC: I think setting paths in gPrefs is bad practice.
/// Suppose we are using gPrefs from elsewhere at the same time?
/// Change these all to full paths?
gPrefs->SetPath(wxT("/AudioIO"));
S.SetBorder( 2 );
S.StartHorizontalLay(wxEXPAND, 0 );
S.StartStatic( _("Playback"),1 );
{
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
S.TieChoice( _("Device") + wxString(wxT(":")), wxT("PlaybackDevice"),
wxT(""), mmPlayNames, mmPlayLabels );
S.AddPrompt( _("Using:") );
wxString ver = _("Portaudio v");
#if USE_PORTAUDIO_V19
ver += wxT("19");
#else
ver += wxT("18");
#endif
S.AddFixedText( ver );
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic( _("Recording"), 1 );
{
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
S.TieChoice( _("Device") + wxString(wxT(":")), wxT("RecordingDevice"),
wxT(""), mmRecordNames, mmRecordLabels );
S.TieChoice( _("Channels") + wxString(wxT(":")), wxT("RecordChannels"),
2, mmChannelNames, mmChannelLabels );
S.EndMultiColumn();
}
S.EndStatic();
S.EndHorizontalLay();
S.StartStatic( _("Playthrough") );
{
S.TieCheckBox( _("&Play other tracks while recording new one"),
wxT("Duplex"),true);
#ifdef __MACOSX__
S.TieCheckBox( _("&Hardware Playthrough (Play new track while recording it)"),
wxT("Playthrough"),false);
#endif
S.TieCheckBox( _("&Software Playthrough (Play new track while recording it)"),
wxT("SWPlaythrough"),false);
}
S.EndStatic();
S.StartHorizontalLay( wxEXPAND, 0 );
S.StartStatic( _("Cut Preview"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Play before cut region:"), wxT("CutPreviewBeforeLen"),1.0,9);
S.AddUnits( _("seconds") );
S.TieTextBox( _("Play after cut region:"),wxT("CutPreviewAfterLen"), 1.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.StartStatic( _("Latency"),1 );
{
S.StartThreeColumn();
#if USE_PORTAUDIO_V19
// only show the following controls if we use Portaudio v19, because
// for Portaudio v19 we always use default buffer sizes
S.TieTextBox( _("Audio to buffer:"),wxT("LatencyDuration"),100.0,9);
S.AddUnits( _("milliseconds") );
#endif
S.TieTextBox( _("Latency correction:"),wxT("LatencyCorrection"),0.0,9);
S.AddUnits( _("milliseconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.EndHorizontalLay();
S.StartHorizontalLay( wxEXPAND, 0 );
S.StartStatic( _("Seek Time"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Short period:"), wxT("SeekShortPeriod"),1.0,9);
S.AddUnits( _("seconds") );
S.TieTextBox( _("Long period:"),wxT("SeekLongPeriod"), 15.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.StartStatic( _("Effects Preview"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Play when previewing:"), wxT("EffectsPreviewLen"), 3.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
gPrefs->SetPath(wxT("/"));
}
void TimerRecordDialog::PopulateOrExchange(ShuttleGui& S)
{
bool bAutoSave = gPrefs->ReadBool("/TimerRecord/AutoSave", false);
bool bAutoExport = gPrefs->ReadBool("/TimerRecord/AutoExport", false);
int iPostTimerRecordAction = gPrefs->ReadLong("/TimerRecord/PostAction", 0);
S.SetBorder(5);
S.StartMultiColumn(2, wxCENTER);
{
S.StartVerticalLay(true);
{
/* i18n-hint: This string is used to configure the controls for times when the recording is
* started and stopped. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The 'h' indicates the first number displayed is hours, the 'm' indicates the second number
* displayed is minutes, and the 's' indicates that the third number displayed is seconds.
*/
wxString strFormat = _("099 h 060 m 060 s");
using Options = NumericTextCtrl::Options;
S.StartStatic(_("Start Date and Time"), true);
{
m_pDatePickerCtrl_Start =
safenew wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_START, // wxWindowID id,
m_DateTime_Start); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_Start->SetName(_("Start Date"));
m_pDatePickerCtrl_Start->SetRange(wxDateTime::Today(), wxInvalidDateTime); // No backdating.
#if wxUSE_ACCESSIBILITY
m_pDatePickerCtrl_Start->SetAccessible( safenew DatePickerCtrlAx(m_pDatePickerCtrl_Start));
#endif
S.AddWindow(m_pDatePickerCtrl_Start);
m_pTimeTextCtrl_Start = safenew NumericTextCtrl(
this, ID_TIMETEXT_START, NumericConverter::TIME,
wxEmptyString, 0, 44100,
Options{}
.MenuEnabled(false)
.Format(strFormat)
.Value(true, wxDateTime_to_AudacityTime(m_DateTime_Start)));
m_pTimeTextCtrl_Start->SetName(_("Start Time"));
S.AddWindow(m_pTimeTextCtrl_Start);
}
S.EndStatic();
S.StartStatic(_("End Date and Time"), true);
{
m_pDatePickerCtrl_End =
safenew wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_END, // wxWindowID id,
m_DateTime_End); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize,
// long style = wxDP_DEFAULT | wxDP_SHOWCENTURY,
// const wxValidator& validator = wxDefaultValidator,
// const wxString& name = "datectrl")
m_pDatePickerCtrl_End->SetRange(m_DateTime_Start, wxInvalidDateTime); // No backdating.
m_pDatePickerCtrl_End->SetName(_("End Date"));
#if wxUSE_ACCESSIBILITY
m_pDatePickerCtrl_End->SetAccessible( safenew DatePickerCtrlAx(m_pDatePickerCtrl_End));
#endif
S.AddWindow(m_pDatePickerCtrl_End);
m_pTimeTextCtrl_End = safenew NumericTextCtrl(
this, ID_TIMETEXT_END, NumericConverter::TIME,
wxEmptyString, 0, 44100,
Options{}
.MenuEnabled(false)
.Format(strFormat)
.Value(true, wxDateTime_to_AudacityTime(m_DateTime_End)));
m_pTimeTextCtrl_End->SetName(_("End Time"));
S.AddWindow(m_pTimeTextCtrl_End);
}
S.EndStatic();
S.StartStatic(_("Duration"), true);
{
/* i18n-hint: This string is used to configure the controls which shows the recording
* duration. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The string 'days' indicates that the first number in the control will be the number of days,
* then the 'h' indicates the second number displayed is hours, the 'm' indicates the third
* number displayed is minutes, and the 's' indicates that the fourth number displayed is
* seconds.
*/
wxString strFormat1 = _("099 days 024 h 060 m 060 s");
m_pTimeTextCtrl_Duration = safenew NumericTextCtrl(
this, ID_TIMETEXT_DURATION, NumericConverter::TIME,
wxEmptyString, 0, 44100,
Options{}
.MenuEnabled(false)
.Format(strFormat1)
.Value(true, m_TimeSpan_Duration.GetSeconds().ToDouble()));
m_pTimeTextCtrl_Duration->SetName(_("Duration"));
S.AddWindow(m_pTimeTextCtrl_Duration);
}
S.EndStatic();
}
S.EndVerticalLay();
S.StartVerticalLay(true);
{
S.StartStatic(_("Automatic Save"), true);
{
// If checked, the project will be saved when the recording is completed
m_pTimerAutoSaveCheckBoxCtrl = S.Id(ID_AUTOSAVE_CHECKBOX).AddCheckBox(_("Enable &Automatic Save?"),
(bAutoSave ? "true" : "false"));
S.StartMultiColumn(3, wxEXPAND);
{
wxString sInitialValue = wxT("");
AudacityProject* pProject = GetActiveProject();
wxString sSaveValue = pProject->GetFileName();
if (sSaveValue != wxEmptyString) {
m_fnAutoSaveFile.Assign(sSaveValue);
sInitialValue = _("Current Project");
}
S.AddPrompt(_("Save Project As:"));
m_pTimerSavePathTextCtrl = NewPathControl(this, ID_AUTOSAVEPATH_TEXT, _("Save Project As:"), sInitialValue);
m_pTimerSavePathTextCtrl->SetEditable(false);
S.AddWindow(m_pTimerSavePathTextCtrl);
m_pTimerSavePathButtonCtrl = S.Id(ID_AUTOSAVEPATH_BUTTON).AddButton(_("Select..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Automatic Export"), true);
{
m_pTimerAutoExportCheckBoxCtrl = S.Id(ID_AUTOEXPORT_CHECKBOX).AddCheckBox(_("Enable Automatic &Export?"), (bAutoExport ? "true" : "false"));
S.StartMultiColumn(3, wxEXPAND);
{
S.AddPrompt(_("Export Project As:"));
m_pTimerExportPathTextCtrl = NewPathControl(this, ID_AUTOEXPORTPATH_TEXT, _("Export Project As:"), wxT(""));
m_pTimerExportPathTextCtrl->SetEditable(false);
S.AddWindow(m_pTimerExportPathTextCtrl);
m_pTimerExportPathButtonCtrl = S.Id(ID_AUTOEXPORTPATH_BUTTON).AddButton(_("Select..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Options"), true);
{
wxArrayString arrayOptions;
arrayOptions.Add(_("Do nothing"));
arrayOptions.Add(_("Exit Audacity"));
arrayOptions.Add(_("Restart system"));
arrayOptions.Add(_("Shutdown system"));
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(0));
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(1));
#ifdef __WINDOWS__
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(2));
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(3));
#endif
m_sTimerAfterCompleteOption = arrayOptions.Item(iPostTimerRecordAction);
m_pTimerAfterCompleteChoiceCtrl = S.AddChoice(_("After Recording completes:"),
m_sTimerAfterCompleteOption,
&m_sTimerAfterCompleteOptionsArray);
}
S.EndStatic();
}
S.EndVerticalLay();
}
S.EndMultiColumn();
// MY: Added the help button here
S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);
Layout();
Fit();
SetMinSize(GetSize());
Center();
EnableDisableAutoControls(bAutoSave, CONTROL_GROUP_SAVE);
EnableDisableAutoControls(bAutoExport, CONTROL_GROUP_EXPORT);
}
void VampEffect::PopulateOrExchange(ShuttleGui & S)
{
Vamp::Plugin::ProgramList programs = mPlugin->getPrograms();
mParameters = mPlugin->getParameterDescriptors();
auto count = mParameters.size();
mToggles.reinit( count );
mSliders.reinit( count );
mFields.reinit( count );
mLabels.reinit( count );
mChoices.reinit( count );
mValues.reinit( count );
S.SetStyle(wxVSCROLL | wxTAB_TRAVERSAL);
wxScrolledWindow *scroller = S.StartScroller(2);
{
S.StartStatic(_("Plugin Settings"));
{
S.StartMultiColumn(5, wxEXPAND);
{
S.SetStretchyCol(3);
if (!programs.empty())
{
wxString currentProgram = wxString::FromUTF8(mPlugin->getCurrentProgram().c_str());
wxArrayStringEx choices;
for (size_t i = 0, cnt = programs.size(); i < cnt; i++)
{
choices.push_back(wxString::FromUTF8(programs[i].c_str()));
}
S.AddPrompt(_("Program"));
S.Id(ID_Program);
mProgram = S.AddChoice(
{},
choices,
choices.Index( currentProgram )
);
mProgram->SetName(_("Program"));
mProgram->SetSizeHints(-1, -1);
wxSizer *s = mProgram->GetContainingSizer();
s->GetItem(mProgram)->SetFlag(wxEXPAND | wxALIGN_CENTER_VERTICAL | wxALL);
S.AddSpace(1, 1);
S.AddSpace(1, 1);
S.AddSpace(1, 1);
}
for (size_t p = 0; p < count; p++)
{
wxString tip = wxString::FromUTF8(mParameters[p].description.c_str());
wxString unit = wxString::FromUTF8(mParameters[p].unit.c_str());
float value = mPlugin->getParameter(mParameters[p].identifier);
mToggles[p] = NULL;
mChoices[p] = NULL;
mSliders[p] = NULL;
mFields[p] = NULL;
mValues[p] = 0.0;
wxString labelText = wxString::FromUTF8(mParameters[p].name.c_str());
if (!unit.empty())
{
labelText += wxT(" (") + unit + wxT(")");
}
S.AddPrompt(labelText + wxT(":"));
if (mParameters[p].isQuantized &&
mParameters[p].quantizeStep == 1.0 &&
mParameters[p].minValue == 0.0 &&
mParameters[p].maxValue == 1.0)
{
S.Id(ID_Toggles + p);
mToggles[p] = S.AddCheckBox( {},
value > 0.5);
mToggles[p]->SetName(labelText);
if (!tip.empty())
{
mToggles[p]->SetToolTip(tip);
}
wxSizer *s = mToggles[p]->GetContainingSizer();
s->GetItem(mToggles[p])->SetFlag(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
S.AddSpace(1, 1);
S.AddSpace(1, 1);
S.AddSpace(1, 1);
}
else if (mParameters[p].isQuantized &&
mParameters[p].quantizeStep == 1.0 &&
!mParameters[p].valueNames.empty())
{
wxArrayStringEx choices;
int selected = -1;
for (size_t i = 0, cnt = mParameters[p].valueNames.size(); i < cnt; i++)
{
wxString choice = wxString::FromUTF8(mParameters[p].valueNames[i].c_str());
if (size_t(value - mParameters[p].minValue + 0.5) == i)
{
selected = i;
}
choices.push_back(choice);
}
S.Id(ID_Choices + p);
mChoices[p] = S.AddChoice( {}, choices, selected );
mChoices[p]->SetName(labelText);
mChoices[p]->SetSizeHints(-1, -1);
if (!tip.empty())
{
mChoices[p]->SetToolTip(tip);
}
wxSizer *s = mChoices[p]->GetContainingSizer();
s->GetItem(mChoices[p])->SetFlag(wxEXPAND | wxALIGN_CENTER_VERTICAL | wxALL);
S.AddSpace(1, 1);
S.AddSpace(1, 1);
S.AddSpace(1, 1);
}
else
{
mValues[p] = value;
FloatingPointValidator<float> vld(6, &mValues[p]);
vld.SetRange(mParameters[p].minValue, mParameters[p].maxValue);
float range = mParameters[p].maxValue - mParameters[p].minValue;
auto style = range < 10 ? NumValidatorStyle::THREE_TRAILING_ZEROES :
range < 100 ? NumValidatorStyle::TWO_TRAILING_ZEROES :
NumValidatorStyle::ONE_TRAILING_ZERO;
vld.SetStyle(style);
S.Id(ID_Texts + p);
mFields[p] = S.AddTextBox( {}, wxT(""), 12);
mFields[p]->SetName(labelText);
mFields[p]->SetValidator(vld);
if (!tip.empty())
{
mFields[p]->SetToolTip(tip);
}
wxSizer *s = mFields[p]->GetContainingSizer();
s->GetItem(mFields[p])->SetFlag(wxALIGN_CENTER_VERTICAL | wxALL);
wxString str = Internat::ToDisplayString(mParameters[p].minValue);
S.AddPrompt(str);
S.SetStyle(wxSL_HORIZONTAL);
S.Id(ID_Sliders + p);
mSliders[p] = S.AddSlider( {}, 0, 1000, 0);
mSliders[p]->SetName(labelText);
mSliders[p]->SetSizeHints(150, -1);
if (!tip.empty())
{
mSliders[p]->SetToolTip(tip);
}
str = Internat::ToDisplayString(mParameters[p].maxValue);
S.AddUnits(str);
}
}
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndScroller();
scroller->SetScrollRate(0, 20);
return;
}
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
wxArrayString empty;
S.SetBorder(2);
S.StartStatic(_("Interface"));
{
S.StartMultiColumn(2);
{
S.Id(HostID);
/* i18n-hint: (noun) */
mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
wxT("/MidiIO/Host"),
wxT(""),
mHostNames,
mHostLabels);
S.SetSizeHints(mHostNames);
S.AddPrompt(_("Using: PortMidi"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Playback"));
{
S.StartMultiColumn(2);
{
S.Id(PlayID);
mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
int latency = gPrefs->Read(wxT("/MidiIO/OutputLatency"),
DEFAULT_SYNTH_LATENCY);
mLatency = S.TieNumericTextBox(_("MIDI Synthesizer Latency (ms):"),
wxT("/MidiIO/SynthLatency"),
latency, 3);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef EXPERIMENTAL_MIDI_IN
S.StartStatic(_("Recording"));
{
S.StartMultiColumn(2);
{
S.Id(RecordID);
mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
S.Id(ChannelsID);
/*
mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
wxEmptyString,
&empty);
*/
}
S.EndMultiColumn();
}
S.EndStatic();
#endif
}
void EffectToneGen::PopulateOrExchange(ShuttleGui & S)
{
wxTextCtrl *t;
S.StartMultiColumn(2, wxCENTER);
{
wxChoice *c = S.AddChoice(_("Waveform:"), wxT(""), &mWaveforms);
c->SetValidator(wxGenericValidator(&mWaveform));
if (mChirp)
{
S.AddFixedText(wxT(""));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
S.AddTitle(_("Start"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
S.AddTitle(_("End"));
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
S.AddPrompt(_("Frequency (Hz):"));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldStartFreq(6, &mFrequency[0], NUM_VAL_NO_TRAILING_ZEROES);
vldStartFreq.SetRange(MIN_StartFreq, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Frequency Hertz Start"));
t->SetValidator(vldStartFreq);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldEndFreq(6, &mFrequency[1], NUM_VAL_NO_TRAILING_ZEROES);
vldEndFreq.SetRange(MIN_EndFreq, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Frequency Hertz End"));
t->SetValidator(vldEndFreq);
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
S.AddPrompt(_("Amplitude (Hz):"));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldStartAmp(6, &mAmplitude[0], NUM_VAL_NO_TRAILING_ZEROES);
vldStartAmp.SetRange(MIN_StartAmp, MAX_StartAmp);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Amplitude Start"));
t->SetValidator(vldStartAmp);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldEndAmp(6, &mAmplitude[1], NUM_VAL_NO_TRAILING_ZEROES);
vldEndAmp.SetRange(MIN_EndAmp, MAX_EndAmp);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Amplitude End"));
t->SetValidator(vldEndAmp);
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
c = S.AddChoice(_("Interpolation:"), wxT(""), &mInterpolations);
c->SetValidator(wxGenericValidator(&mInterpolation));
}
else
{
FloatingPointValidator<double> vldFrequency(6, &mFrequency[0], NUM_VAL_NO_TRAILING_ZEROES);
vldFrequency.SetRange(MIN_Frequency, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(_("Frequency (Hz):"), wxT(""), 12);
t->SetValidator(vldFrequency);
FloatingPointValidator<double> vldAmplitude(6, &mAmplitude[0], NUM_VAL_NO_TRAILING_ZEROES);
vldAmplitude.SetRange(MIN_Amplitude, MAX_Amplitude);
t = S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12);
t->SetValidator(vldAmplitude);
}
bool isSelection;
double duration = GetDuration(&isSelection);
S.AddPrompt(_("Duration:"));
mToneDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
isSelection ? _("hh:mm:ss + samples") : _("hh:mm:ss + milliseconds"),
duration,
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->EnableMenu();
S.AddWindow(mToneDurationT, wxALIGN_LEFT | wxALL);
}
S.EndMultiColumn();
return;
}
void ChangePitchDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
wxTextValidator numvld(wxFILTER_NUMERIC);
wxArrayString pitch;
pitch.Add(wxT("C"));
pitch.Add(wxT("C#/Db"));
pitch.Add(wxT("D"));
pitch.Add(wxT("D#/Eb"));
pitch.Add(wxT("E"));
pitch.Add(wxT("F"));
pitch.Add(wxT("F#/Gb"));
pitch.Add(wxT("G"));
pitch.Add(wxT("G#/Ab"));
pitch.Add(wxT("A"));
pitch.Add(wxT("A#/Bb"));
pitch.Add(wxT("B"));
S.SetBorder(10);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Change Pitch without Changing Tempo") +
wxString(wxT("\n\n")) +
_("by Vaughan Johnson && Dominic Mazzoni") +
wxString(wxT("\n")) +
_("using SoundTouch, by Olli Parviainen"));
}
S.EndHorizontalLay();
S.SetBorder(5);
//
S.StartMultiColumn(6, wxCENTER);
{
//
S.AddUnits(_("Pitch:"));
S.StartHorizontalLay(wxALIGN_CENTER_VERTICAL);
{
m_pChoice_FromPitch = S.Id(ID_CHOICE_FROMPITCH)
.AddChoice(_("From:"), wxT(""), &pitch);
m_pChoice_FromPitch->SetName(_("From Pitch"));
m_pChoice_FromPitch->SetSizeHints(100, -1);
}
S.EndHorizontalLay();
S.StartStatic(wxT(""));
{
S.StartVerticalLay();
{
S.SetBorder(3);
m_pRadioButton_PitchUp = S.Id(ID_RADIOBUTTON_PITCHUPDOWN)
.AddRadioButton(_("Up"));
m_pRadioButton_PitchDown = S.Id(ID_RADIOBUTTON_PITCHUPDOWN)
.AddRadioButtonToGroup(_("Down"));
S.SetBorder(5);
}
S.EndVerticalLay();
}
S.EndStatic();
S.StartHorizontalLay(wxALIGN_CENTER_VERTICAL);
{
m_pChoice_ToPitch = S.Id(ID_CHOICE_TOPITCH)
.AddChoice(_("To:"), wxT(""), &pitch);
m_pChoice_ToPitch->SetName(_("To Pitch"));
m_pChoice_ToPitch->SetSizeHints(100, -1);
}
S.EndHorizontalLay();
}
S.EndMultiColumn();
//
S.StartMultiColumn(2, wxCENTER);
{
//
S.AddPrompt(_("Semitones (half-steps):"));
S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
{
m_pTextCtrl_SemitonesChange = S.Id(ID_TEXT_SEMITONESCHANGE)
.AddTextBox(wxT(""), wxT(""), 12);
m_pTextCtrl_SemitonesChange->SetName(_("Semitones in half-steps"));
m_pTextCtrl_SemitonesChange->SetValidator(numvld);
}
S.EndHorizontalLay();
//
S.AddPrompt(_("Frequency (Hz):"));
S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
{
m_pTextCtrl_FromFrequency = S.Id(ID_TEXT_FROMFREQUENCY)
.AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromFrequency->SetName(_("From frequency in hertz"));
m_pTextCtrl_FromFrequency->SetValidator(nullvld);
m_pTextCtrl_ToFrequency = S.Id(ID_TEXT_TOFREQUENCY)
.AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToFrequency->SetName(_("To frequency in seconds"));
m_pTextCtrl_ToFrequency->SetValidator(numvld);
}
S.EndHorizontalLay();
//
S.AddPrompt(_("Percent Change:"));
S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
{
m_pTextCtrl_PercentChange = S.Id(ID_TEXT_PERCENTCHANGE)
.AddTextBox(wxT(""), wxT(""), 12);
m_pTextCtrl_PercentChange->SetName(_("Percent Change"));
m_pTextCtrl_PercentChange->SetValidator(numvld);
}
S.EndHorizontalLay();
}
S.EndMultiColumn();
//
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_PercentChange = S.Id(ID_SLIDER_PERCENTCHANGE)
.AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
m_pSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
return;
}
void QualityPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Sampling"));
{
S.StartMultiColumn(2);
{
S.AddPrompt(_("Default Sample &Rate:"));
S.StartMultiColumn(2);
{
// If the value in Prefs isn't in the list, then we want
// the last item, 'Other...' to be shown.
S.SetNoMatchSelector(mSampleRateNames.GetCount() - 1);
// First the choice...
// We make sure it uses the ID we want, so that we get changes
S.Id(ID_SAMPLE_RATE_CHOICE);
// We make sure we have a pointer to it, so that we can drive it.
mSampleRates = S.TieChoice(wxT(""),
wxT("/SamplingRate/DefaultProjectSampleRate"),
AudioIO::GetOptimalSupportedSampleRate(),
mSampleRateNames,
mSampleRateLabels);
S.SetSizeHints(mSampleRateNames);
// Now do the edit box...
mOtherSampleRate = S.TieNumericTextBox(wxT(""),
mOtherSampleRateValue,
15);
}
S.EndHorizontalLay();
S.TieChoice(_("Default Sample &Format:"),
wxT("/SamplingRate/DefaultProjectSampleFormat"),
floatSample,
mSampleFormatNames,
mSampleFormatLabels);
S.SetSizeHints(mSampleFormatNames);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Real-time Conversion"));
{
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(2);
S.TieChoice(_("Sample Rate Con&verter:"),
Resample::GetFastMethodKey(),
Resample::GetFastMethodDefault(),
mConverterNames,
mConverterLabels),
S.SetSizeHints(mConverterNames);
S.TieChoice(_("&Dither:"),
wxT("/Quality/DitherAlgorithm"),
Dither::none,
mDitherNames,
mDitherLabels);
S.SetSizeHints(mDitherNames);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("High-quality Conversion"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Sample Rate Conver&ter:"),
Resample::GetBestMethodKey(),
Resample::GetBestMethodDefault(),
mConverterNames,
mConverterLabels),
S.SetSizeHints(mConverterNames);
S.TieChoice(_("Dit&her:"),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped,
mDitherNames,
mDitherLabels);
S.SetSizeHints(mDitherNames);
}
S.EndMultiColumn();
}
S.EndStatic();
}
void QualityPrefs::PopulateOrExchange( ShuttleGui & S )
{
S.SetBorder( 2 );
S.StartStatic(_("Sampling"),0 );
{
S.StartTwoColumn();
S.AddPrompt( _("Default Sample Rate:") );
DefineSampleRateControl( S ); // A tricky control.
S.TieChoice(_("Default Sample Format:"),
wxT("/SamplingRate/DefaultProjectSampleFormat"),
floatSample, mmSampleFormatNames, mmSampleFormatLabels );
// JKC For the old style of layout, uncomment the next line.
// #define OLD_STYLE_LAYOUT
// Once we've chosen which layout to use we'll remove the
// other one. (June/2006).
#ifdef OLD_STYLE_LAYOUT
S.TieChoice(_("Real-time sample rate converter:"),
wxT("/Quality/LibresampleSampleRateConverter"),
(int)0, mConverterNames, mConverterLabels),
S.TieChoice(_("High-quality sample rate converter:"),
wxT("/Quality/LibresampleHQSampleRateConverter"),
(int)1, mConverterNames, mConverterLabels),
S.TieChoice(_("Real-time dither:"),
wxT("/Quality/DitherAlgorithm"),
Dither::none, mmDitherNames, mmDitherLabels );
S.TieChoice(_("High-quality dither:"),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped, mmDitherNames, mmDitherLabels );
#endif
S.EndTwoColumn();
}
S.EndStatic();
// The new style of layout has
// - columns for converter and dither.
// - rows for Real-time and High-quality.
#ifndef OLD_STYLE_LAYOUT
S.StartStatic( _("Conversion") );
{
// We use blank labels here and there to end up with
// a three column layout.
S.StartMultiColumn(3);
S.AddFixedText(wxT(""));
S.AddTitle(_("Sample Rate Converter" ));
S.AddTitle(_("Dither"));
S.TieChoice(_("Real-time:"),
wxT("/Quality/LibresampleSampleRateConverter"),
(int)0, mConverterNames, mConverterLabels),
S.TieChoice(wxT(""),
wxT("/Quality/DitherAlgorithm"),
Dither::none, mmDitherNames, mmDitherLabels );
S.TieChoice(_("High-quality:"),
wxT("/Quality/LibresampleHQSampleRateConverter"),
(int)1, mConverterNames, mConverterLabels),
S.TieChoice(wxT(""),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped, mmDitherNames, mmDitherLabels );
S.EndMultiColumn();
}
S.EndStatic();
#endif
}
void NoiseRemovalDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartStatic(_("Step 1"));
{
S.AddVariableText(_("Select a few seconds of just noise so Audacity knows what to filter out,\nthen click Get Noise Profile:"));
m_pButton_GetProfile = S.Id(ID_BUTTON_GETPROFILE).AddButton(_("&Get Noise Profile"));
}
S.EndStatic();
S.StartStatic(_("Step 2"));
{
S.AddVariableText(_("Select all of the audio you want filtered, choose how much noise you want\nfiltered out, and then click 'OK' to remove noise.\n"));
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
wxTextValidator vld(wxFILTER_NUMERIC);
mGainT = S.Id(ID_GAIN_TEXT).AddTextBox(_("Noise re&duction (dB):"), wxT(""), 0);
S.SetStyle(wxSL_HORIZONTAL);
mGainT->SetValidator(vld);
mGainS = S.Id(ID_GAIN_SLIDER).AddSlider(wxT(""), 0, GAIN_MAX);
mGainS->SetName(_("Noise reduction"));
mGainS->SetRange(GAIN_MIN, GAIN_MAX);
mGainS->SetSizeHints(150, -1);
mSensitivityT = S.Id(ID_SENSITIVITY_TEXT).AddTextBox(_("&Sensitivity (dB):"),
wxT(""),
0);
S.SetStyle(wxSL_HORIZONTAL);
mSensitivityT->SetValidator(vld);
mSensitivityS = S.Id(ID_SENSITIVITY_SLIDER).AddSlider(wxT(""), 0, SENSITIVITY_MAX);
mSensitivityS->SetName(_("Sensitivity"));
mSensitivityS->SetRange(SENSITIVITY_MIN, SENSITIVITY_MAX);
mSensitivityS->SetSizeHints(150, -1);
mFreqT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Fr&equency smoothing (Hz):"),
wxT(""),
0);
S.SetStyle(wxSL_HORIZONTAL);
mFreqT->SetValidator(vld);
mFreqS = S.Id(ID_FREQ_SLIDER).AddSlider(wxT(""), 0, FREQ_MAX);
mFreqS->SetName(_("Frequency smoothing"));
mFreqS->SetRange(FREQ_MIN, FREQ_MAX);
mFreqS->SetSizeHints(150, -1);
mTimeT = S.Id(ID_TIME_TEXT).AddTextBox(_("Attac&k/decay time (secs):"),
wxT(""),
0);
S.SetStyle(wxSL_HORIZONTAL);
mTimeT->SetValidator(vld);
mTimeS = S.Id(ID_TIME_SLIDER).AddSlider(wxT(""), 0, TIME_MAX);
mTimeS->SetName(_("Attack/decay time"));
mTimeS->SetRange(TIME_MIN, TIME_MAX);
mTimeS->SetSizeHints(150, -1);
S.AddPrompt(_("Noise:"));
mKeepSignal = S.Id(ID_RADIOBUTTON_KEEPSIGNAL)
.AddRadioButton(_("Re&move"));
mKeepNoise = S.Id(ID_RADIOBUTTON_KEEPNOISE)
.AddRadioButtonToGroup(_("&Isolate"));
}
S.EndMultiColumn();
}
S.EndStatic();
}